Orkoplast d.o.o.

Condition: used, Year of construction: 1987, material width 800 mm material thickness 0,4 - 2,5 mm no. of straightening rolls 8 straightening roll diameter 53 mm number of draw-in rolls 2 diameter of draw-in rolls 160 mm material thickness at 800 mm material width (Niro) 0,6 mm material thickness at 800 mm material width (steel 1,0 mm material thickness at 150 mm material width (Niro) 2,5 mm material cross-cut 975 mm² speed - 35 m/min power requirement 2,1 kW weight 7,0 t dimensions (WxDxH) 2,0 x 2,0 x 2,3 m Straightening machine RM 8-53/160-800 with infinitely varibale drive, motoric driven straightening rolls, supporting rolls, hydraulic lifting of the roller cassette, motorized adjustment of the rolls, hydraulic threading wedge, side guidance at the inlet Ljdpsy Ruttsfx Ahzerl

Condition: good (used), Year of construction: 2012, Ref. -No.: 10469 Manufacturer: JAESPA Type: Comfort 420 A Year of construction: 2012 Storage location: Halberstadt Machine-No.: 233XXXXX Weight Of The Machine Ca.: 2500 kg Machine length: 2400 mm Lodpfx Aoy Ed D Dshzorl Machine width: 2800 mm Machine Height: 1700 mm Bending capacity square tube: 420 x 420 mm Bending capacity round bar: 420 mm Bundle min.: 215 x 65 mm Bundle max.: 420 x 170 mm Flat: 420 x 420 mm Roll diameter: 590 mm Saw band dimensions: 4100 x 1300 x 4780 mm Belt speed: 15 - 100 m/min. Operating pressure: 50 bar Flow rate: 6,5 l/min Tank capacity: 40 liter Coolant content: 50 liter Material support height: 800 mm Saw motor: 5,5 kW hydraulic motor: 0,75 kW coolant pump: 0,12 kW Chip brush: 0,09 kW Chip conveyor: 0,18 kW Measurement standard: DIN EN 23746

Condition: ready for operation (used), Strip width: 300 mm Strip thickness: 0.4 - 2.5 mm at maximum strip width Number of straightening rollers: 11 pcs Number of feeder rollers: 2 pcs Number of exit rollers: 2 pcs Roller diameter: 60 mm All upper rollers manually adjustable All lower rollers interconnected by gears Variable speed, manually adjustable via handwheel Loop control via touch arm Strip guide at inlet Lrjdpfjyztzdjx Ahzsl Roller basket at outlet

Condition: used, Year of construction: 1989, number of straightening rollers: 21, straightening roller diameter: 80 mm, sheet thickness steel (max.): 10 mm, product width (max.): 1,250 mm, Sheet width: 1250 mm Sheet thickness: 10 mm Number of rollers: 21 pcs Roller diameter: 80 mm Belt speed: 12 m/min Adjustable cross-section: 5700 mm² Total power requirement: 60 kW Equipment: Working direction: left to right Strip infeed: left Belt speed control: three-phase motor Measuring device: digital display Roll stand adjustment: motorized Positioning control: TWIN-Control Lrjdpfxjyykyhs Ahzel Quick-change system: hydraulic

Condition: used, Year of construction: 1987, material width 120 mm material thickness 0,2 - 4,0 mm no. of straightening rolls 19 straightening roll diameter 24 mm material cross-cut 2 - 120 mm² 40 mm bending speed 5 - 25 m/min power requirement 2,5 kW Lredpfxoynmpao Ahzel weight 0,85 t dimensions (WxDxH) 1,2 x 1,7 x 1,6 SPECIAL DEAL as is where is, IN NEED OF OVERHAUL WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: new, Year of construction: 2025, functionality: fully functional, number of straightening rollers: 3, product height (max.): 1,300 mm, total length: 1,700 mm, total height: 980 mm, total width: 600 mm, working width: 1,300 mm, product width (max.): 1,300 mm, overall weight: 160 kg, warranty duration: 24 months, power: 1.5 kW (2.04 HP), actuation type: electric, W11G – maximum material thickness 1.5 mm, with gearbox Lsdoymc Szspfx Ahzjrl

Condition: not inspected (used), Year of construction: 1994, functionality: unexamined, machine/vehicle number: 86636, overall weight: 10,000 kg, pressing force: 25 t, installation height: 600 mm, stroke length: 200 mm, No reserve price – guaranteed sale to the highest bidder! Ledpfoylaa Hsx Ahzerl Submitting a bid obligates prompt collection between 08/04/2026 and 16/04/2026! TECHNICAL DETAILS Pressing force: 250 kN Ram stroke: 200 mm Installation height: 600 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 43 A Dimensions & Weight Dimensions (L x W x H): 5,000 x 4,000 x 3,500 mm Weight: 10,000 kg Note: The machine can be transported on a standard truck. External reference: 21

Condition: used, Year of construction: 1966, 5 weight 5 t . Lrodsx U A Nkopfx Ahzol

Condition: excellent (used), Year of construction: 1990, number of straightening rollers: 23, roller diameter: 80 mm, Number off straightening rolls 23 units Roll diameter 80 mm Minimum thickess 0,5 mm Maximum thickness 12 mm Digital readout system position rolls Fine adjustment down feed   Rolling width: 1450mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:16mm Top Roll Ø: 80mm Bottom Roll Ø: 80mm Number of rolls: 23 Ljdpfxjxyhhao Ahzjrl Rolling speed: 3,75 - 15 M/Min Adjustiment lower roll: 26mm/min. Power: 30kW Length: 3000mm Width: 4000mm Height: 2400mm Weight: 28000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, number of straightening rollers: 9, product height (max.): 3 mm, straightening roller diameter: 30 mm, working width: 400 mm, coil inner diameter: 360 mm, coil outer diameter: 1,700 mm, workpiece weight (max.): 2,000 kg, Straightening machine with double decoiler and loop Lrsdpfx Ahoxiyx Nezel

Condition: good (used), Year of construction: 1991, functionality: fully functional, number of straightening rollers: 9, total length: 1,550 mm, straightening roller diameter: 30 mm, total height: 1,820 mm, total width: 2,500 mm, sheet thickness (max.): 2 mm, Kohler straightening unit 30.180 / 9-300.1 consisting of: Straightening machine KRM 30.180 / 9 Lsdpfx Aowrx R Sjhzorl Uncoiling reel 300.1 Strip guide

Condition: used, Year of construction: 1993, Price: On request Coil feed line system, straightener, decoiler Manufacturer: ARKU Year: 1993 Decoiler Type: AH 5000/500/MSG-4Q Capacity: 5000kg Working width: 50-500mm Speed: 50 m/min Max coil-diameter: 1800mm Straightener Type: RM 3060.4/9 Lredpfx Ahswng Ukezsl Number of rolls: 9 Diameter rolls: 30 Capacity: 0,5-6mm Working width: 50-600mm Speed: 50 m/min Needs new PLC (controller in cabinet). Is taken by previous owner for programm. - Year: 1993 - Documentation available: No - CE certificate present: No - Min. sheet thickness [mm]: 0.5 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 600 - Number of rolls [pcs]: 9 - Roll diameter [mm]: 30 - Rolling speed [m/min]: 50 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, Sheet straightening machine, 2100 mm,Sheet Metal Straightening, Plate Leveler Machine 2100 mm Used machine Maximum Sheet Width: 2100 mm (2100x8 mm) Maximum Sheet Thickness: 10 mm (1500x10 mm) Number of Rolls: 11 pcs Roll Diameter: 95 mm Electric Motor: Adjustable speed and direction Lredpov Tpv Njfx Ahzel Electrical Data: 400 V, 50 Hz, 36 A, 22.5 kW Includes a roller conveyor.

Condition: used, Year of construction: 1996, material width 500 mm material thickness 0,3 - 3,0 mm no. of straightening rolls 5 straightening roll diameter 40 mm number of draw-in rolls 2 diameter of draw-in rolls 80 mm material cross-cut 600 mm² material thickness at 500 mm material width 1,2 mm material thickness at 200 mm material width 3,0 mm power requirement 4,0 kW weight 2,0 t dimensions (WxDxH) 1,5 x 1,5 x 1,9 m with motor, upper straightening rolls individually manually adjustable, neumatic adjustment of the infeed rolls, coil loop control via ultrasonic sensor Lrsdpfxovuum Ns Ahzsl

Condition: used, Year of construction: 1984, material width 250 mm material thickness 0,2 - 2,0 mm no. of straightening rolls 7 straightening roll diameter 60 mm run-in height 1250 mm speed 5 - 30 m/min power requirement 2,2 + 1,3 kW Weight 0,65 t dimensions (WxDxH) 1,05 x 1,25 x 1,5 m SPECIAL DEAL as is where is Lrodpfxovuk Sbo Ahzsl WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1982, material width 250 mm Lredpfx Aovuk Nyehzel material thickness 0,4 - 5,0 mm no. of straightening rolls 9 straightening roll diameter 60 mm speed 3 - 15 m/min material thickness at 250 mm material width 3,5 mm material thickness at 100 mm material width 5,0 mm power requirement 1,8 kW weight 0,9 t dimensions (LxWxH) 1,45 x 1,4 x 1,55 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck

Condition: refurbished (used), Tube Straightener VRM60/75, made by KIESERLING Lredpevtpghsfx Ahzsl Tube diameter : 8 – 60 or 14 - 75 mm Tube length : Depending on accessories (loading table, channels). Minimum 0.5m The ratio diameter/thickness depends on the yield. Strength Example: - 300 N/mm2 = Max. 6.5mm - 400 N/mm2 = Max. 5.7mm - 500 N/mm2 = Max. 5.1mm - 600 N/mm2 = Max. 4.7mm *The first 4 photos are examples of revamping of similar machines that we can offer in case of interest. The following are pictures of the machine in its current state. Tube diameter: 8 – 60 or 14 - 75 mm Tube length: Depending on accessories (loading table, channels). Minimum 0.5m

Condition: used, Technical details: plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm distance between columns: 920 mm Number of Straightening rolls: oben 4x unten 4x Stück / pieces roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t dimensions L x W x H: 3,8 x 2,2 x 2,1 m This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Roller support Infeed height 1400 mm Hydraulic system equipment Operated externally Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. * Lredpfx Ajvgbgajhzjl

Condition: used, Technical details: band width: 80 mm plate thickness: 1,5 mm number of rolls: 5 total power requirement: 1,2 kW weight of the machine ca.: 150 t Lrodpfou Ic E Rsx Ahzjl space requirements approx. LxWxH: 1,1 x 0,7 x 1,4 m straightening rolls: - 2 upper rolls, 3 lower rolls - material feed is performed via two compressed air controlled rolls - compressed air connection is not mounted i.D. *

Condition: used, Technical details: sheet width: 250 mm plate thickness: 2 mm number of rolls: 11 straightening feed: 5...30 m/min infeed height: 1250 mm total power requirement: 4,0 kW weight of the machine ca.: 620 kg dimensions of machine: 1,15x1,02x1,5 mm dimensions electric cabinet LxWxH: 0,66x0,53x0,32 m Band Leveling Machine with feed equipment: - sideways band guidance rolls Lsdou Ic Ewopfx Ahzerl model: - band intake height horizontal:1250mm - tiltable: positiv 30°; negativ 15° *

Condition: used, Technical details: material width: 200 mm material thickness: 1,5 mm Number of Straightening rolls: 5x oben/upper/arriba no. of rolls: 6x unten/ lower/abajo throughput speed: nicht bekannt/ unknown/desconocido m/min current: 220/50 A/Hz total power requirement: 1,5 kW weight of the machine ca.: 0,447 t space requirements of the machine approx.: L:0,88xB:0,76xH:1,26 m description: machine does have 11 rolls upper roll: width: 210mm, dia. approx. 60mm, driven adjustable lower roll: width: 210mm, dia. approx.60mm, driven, not adjustable * Lredpfx Aheu Ic D Tjzsl

Condition: used, Technical details: material width: 400 mm Lsdpfx Aheu Ic Dyezjrl material thickness: 2 mm Number of Straightening rolls: oben/upper/arriba: 5x Number of Straightening rolls: unten/lower/abjo: 6x roll width: 410 mm throughput speed: 9-20 m/min total power requirement: 5,5 kW Weight approx.: 1,3 t space requirement of the machine approx.: L:2,1xB:1,0xH:1,35 m description: - upper rolls adjustable around 14mm, not driven - lower rolls not adjustable, driven - each 1 intake/output roll (dia 35x410mm) equipment: - drum intake (L:1,2xW:0,7xH:1,16m), with 4 pcs rolls and guidance waggon - 2 intake limits / output limits This straightening machine must be electrically integrated by the customer! *

Condition: used, Technical details: plate width: 800 mm coil weight: 12 t sheet width - max.: 800 mm sheet width - min.: 300 mm Lsdpfx Aeu Ic Avjhzerl thickness of strip/band: max. 5,0 mm band speed: 4,5 / 25 m/min work height max.: 1700 mm Payload: 12,0 to (Coil) Weight approx.: 7,3 + 6,62 t dimensions of coil: 3,2 x 1,9 x 2,7 m dimension machine xH: 2,5 x 2,6 x 2,45 m Decoiler with loading device Can optionally be sold together with stock no. 0100571. straightening unit: Infeed rollers: 2 x Ø 144 x 850mm Straightening rolls: 3 x bottom rolls, rigid, Ø 100 x 850mm, 30mm adjustable 3 x top rollers, Ø 110 x 850mm; 30 mm adjustable Coil unwinding machine: Outer Ø 1.500mm Strip width max. 800mm Load capacity max. 12 to Clamping Ø 470 - 630 / 570 - 730mm Transport unit LxWxH: 1700 x 1500 x 1000mm; crosswise running, with prism support 1000 x1000mm Machine will be offered and sold with Stock no. 0100521 as a decoiling and streightening line. *

Condition: new, Year of construction: 2026, material width 100 mm material thickness 15 mm no. of straightening rolls 9 straightening feed 7 m/min total power requirement 0,75 kW weight of the machine ca. 380 kg dimensions of the machine ca. 710 x 920 x 1360 mm Features: - 5x driven lower rollers Ledjurni Uepfx Ahzorl - 4x adjustable upper rollers - Max. cross-section approx. 800 mm² - Mobile use on casters - Operating instructions

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: Ledsmqkt Topfx Ahzerl • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics