REFPOL sp z oo

Condition: used, Used LABOR-PILOT 2000/4 type in stainless steel-NR 03-4470H-Manufactured in 2003-With LABOR PILOT CONTROLLER-3 x 380 Volts-On mobile frame Codpfxsx Db Rij Afloaa

Condition: used, Used Christy Turner hammer mill model LB7. Infeed is 252mm dia by 295mm length. Unit driven by 15kW, 1460rpm motor. Rotor housing is 205mm diameter by 400mm long. Unit has mild steel blunt swinging hammers approximately 10mm thick. Includes discharge hopper. All mounted on a mild steel stand. Cjdpfox Db Iuox Aflsaa Weight: Estimated: Lbs250.0 Dimensions: 700 X 1450

Condition: used, Used Alpine Model 630AFG stainless steel Aeroplex fluidized bed opposed jet milling system. Stainless steel classifier wheel belt driven by 15kw, 400/690volt, 2/50, 2940rpm motor. Unit includes (4) jet nozzles. Includes product feeding vessel approx 230 litre capacity with stainless steel screw feeder driven by 1.5kw, 400volt, 3/50, 1440rpm motor. Unit all mounted on common mild steel frame. Codpfx Afjxyxlceloaa Specifications: Motor Power: 20.1 hp

Condition: used, Used JetPharma Model MC JetMill50 stainless steel mobile jet mill. Process gas maximum pressure 12 bar at 0 to 50 deg.c. Mounted on stainless stand. Cjdjxw Tcqepfx Afloaa Specifications: Grinding Air Pressure: 174 PSI

Year of construction: 2015, condition: ready for operation (used), A laboratory ball mill Netzsch is available. Drive power: 1.5kW, speed: 4200rpm, ball diameter range: 0.05mm-2mm, total ball volume: 140ml, max. product volume batch/circulation: 140ml/500ml, max. product viscosity: 5000mPas. Machine dimensions X/Y/Z: approx. 850mm/600mm/700mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Cajdpfxexvrt So Aflja

Condition: used, Hollow body granulator and secondary granulator for pre-shredded material. Caedpexgrx Nofx Afloa Rotor diameter 450 mm Rotor width 600 mm 3 rotor knives (diagonal cut), 2 stator knives Drive motor 22 kw

Condition: used, The Herbold PU 500 pulverizer is suitable for fine grinding of plastics and soft to medium-hard materials. Caodjxgrqfjpfx Aflea Drive power 55 kw Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Condition: used, Multiple knife mill / granulator with rotor with 16 knives 6 stator knives Drive 90 kW With equipment Casdpjxgrn Rsfx Aflea

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes Cedpjxgrnqjfx Afleaa 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, Drive 37kw (ca be changed to max. 75 kw) Cedoxgrgyopfx Afleaa rotor diameter 500 mm rotor width 600 mm 5 knive scissor cut, housing hingeable, with 2 stator knives Opening inlet 500 x 600 mm

Condition: used, power: 160 kW (217.54 HP), Cutting mill TRIA 120-80 FN / Cutting mills New hydraulics, new knives, new bearings Drive: 160.0 kW Rotor knives: 7x2 Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Csdpfx Afexgrfvelsaa Inlet: 800 x 1200 mm

Condition: used, Condux Granulator type CS 300/600-4 WK Rotor diameter: 300 mm Rotor width: 600 mm Rotor knives: 3 Housing with 4 stator knives Caedpfx Aoxgrfisflsa Drive motor 11 kW (on request max. 30 kW)

Condition: used, Drive motor 37 kW (can be increased to 75 kW) Casdpfx Afoxgrd Eolja Rotor diameter: 500 mm Rotor width: 600 mm Inlet opening: 500 x 600 mm 5 knives, diagonal cut Hinged housing, with 2 stator knives.

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Codpoxgrdfefx Afleaa Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Cutting mill / cutting mills Caodoxgq Ucepfx Aflja Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Condition: used, HERBOLD single-shaft shredder EWS 45/200 With pressing device (pendulum arm) Working width 2000 mm Cjdpfxexgq S Ue Afljaa Rotor diameter 450 mm Drive 2 x 90 kW Machine in very good condition, ready for operation

Condition: used, Granulator / Granulators Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Infeed hopper for conveyor belt feeding. Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Caodpfxexb Aggs Aflea Drive: 75 kW

Condition: used, Year of construction: 1976, functionality: unexamined, machine/vehicle number: TM5, input voltage: 380 V, Used Molteni Milano TM5 Multipurpose Mixer Manufacturer: Molteni Milano Cedjw H I Tlepfx Afljaa Model: TM5 Voltage: 380 Volt Last inspection: June 2017 Year of manufacture: 1976

Condition: used, functionality: unexamined, machine/vehicle number: Pulverisette 05102, Used Fritsch Pulverisette ball mill with cabinet and accessories Cjdpfx Afjw Hct Hjljaa Manufacturer: Fritsch Model: Pulverisette 05102 Voltage: 220V Includes mobile cabinet with contents

Year of construction: 2006, condition: excellent (used), Used Tietjen GD12 ex Atex Hammer Mill Including 200kW 1500 rpm motor (other options possible upon request) Caedpfx Aow Dv Aiofloa Year of manufacture: 2006 Atex compliant Including DA576 feeder Magnetic separator and air gravity separator

Year of construction: 1999, condition: good (used), Wijnveen GHM 1250 Total width of grinding chamber: 1250 mm Caodpfew Dv Acox Afloa 150 kW motor with 1500 rpm (other motors available upon request) 1000 mm + 250 mm configuration for various screen perforations for coarse/fine grinding as desired. Including feeder with magnet Refurbished in 2014

Year of construction: 1967, condition: ready for operation (used), A roller crusher BMD machine and a gyratory crusher Fried. Krupp (Thyssen-Krupp) are available. 1) Roll crusher BMD machine BHS Walzwerk V1-800, year of construction: 1967, general overhaul: 1981, power requirement: 30kW. 2) Gyratory crusher Friedrich Krupp Gyradisc fine crusher. On-site inspection is possible. Codpfx Afsv Dwixsloaa

Year of construction: 1979, condition: ready for operation (used), A Gebr. Pfeiffer ball mill is available. Drive power: 330kW, diameter: 2400mm, length: 5000mm, number of motors: 2, motor weight: 180kg, flywheel width: 3.2mm. On-site inspection is possible. Casdpfxov Dwirs Aflja

Year of construction: 2025, condition: new, ceramic ball mill ,Batch ball mill ,also called ceramic ball mill ,it is used for fine grinding of feldspar,quartz,clay,ore and so on.The ceramic ball mill is mainly used for material mixing, grinding,uniform product fineness,and saving power.It can be dry or wet.The machine can use different liner types according to production needs to meet different needs.The fineness of the grinding operation is controlled by the grinding time Casdevzx Auspfx Aflea ceramic ball mill Working principle when ball mill working,steel balls inside drum will rotate with the drum to some height,and then steel balls fall down with materials to reach the point of grinding. Working Principle of Ceramic ball mill ceramic ball mill ,Intermittent ball mill grinding operation is finished in the cylinder body. When the cylinder rotates, materials ascend to a certain height and then fall along a certain path due to the balls' gravity. Two forces are generated on the balls inside. One is the force on balls through tangent direction; the other is a opposite force in the contrast to the diameter of balls, as a result of the force generated when the balls slide down. These two forces will constitute a couple for the steel balls. The balls are squeezed between the cylinder and the adjacent steel balls, so the couple can make unequal-sized friction force. The balls will orbit along with the cylinder axis and then fall down, which can produce a strong impact force on the ores in the cylinder body and, as a result, the ores will be crushed. In conclusion, the ores in the cylinder body are mainly crushed by composite effect of peeling force, impact force and extrusion force. Ceramic ball mill also named Intermittent ball mill which adopts the wet intermittent operation, is used for fine grinding and mixing the material such as feldspar, quartz, clay ceramic raw materials. The discharging and the mud size can through through 1000 sieve pore. This machine is high milling machinery, materials should be Broken in the fineness of the state into the grinding mill to get the highest efficiency and economic benefits. The cement mill is key equipment for the grinding process of the cement clinker after the crushing process of it. It is mainly used in the cement silicate product industry. After long term design and manufacture of the cement mill, our company now has series of cement mill with various specifications to meet with different requirement from our customers. Features of Cement Mill Our company adopts suitable transmission methods according to different specifications. We have brim drive and center drive as transmission form. The cylinder adopts new type step lining to increase the grinding area. And it is easily repairable and changeable. The new designed separate-chambered structure adopts flexible lifting blade and fixed lifting blade and it is easily fixed and repaired. Working Principle of Cement Mill The cylinder will rotate by the transmission device. Due to the inertial centrifugal force, the steel balls will stick on the liner plate and rotate with the cylinder together. When the steel balls come to a certain height, it will fall down by gravity and impact the raw material. And the repeated going-up, falling down, slide and roll of the steel balls can grind the raw material together with the liner plates.

Condition: refurbished (used), Hosokawa Mikropul ACM 10 fine mill / classifier mill with new control cabinet and accessories We are offering a Hosokawa Mikropul ACM 10 fine mill in very good condition - an ideal solution for the precise crushing and classification of powders and granules. Technical data: • Model: ACM 10 • Motor power: 9.2 kW • Condition: Very good condition (refurbished), with newly built control cabinet Additional details: • Classifying sieve available: A subsequent classifying sieve is also in stock. • Comparable mills: We have similar/analog mills in stock that work on the same principle as the ACM 10. Advantages of the ACM 10: • Compact design: Saves space in production • Energy efficient: Optimized for lower power consumption • Flexible use: For processing chemicals, food, pharmaceuticals and more Caedpjvn Riaofx Aflja Condition and inspection: The machine would be ready for use quickly and can be inspected by arrangement. We also offer technical accessories and spare parts for seamless integration into your production. Contact us for more information or a customized offer.