F. H. P. Drozdex

Condition: used, Year of construction: 2004, operating hours: 20,000 h, functionality: fully functional, machine/vehicle number: 9060, cutting height (max.): 160 mm, total length: 15,300 mm, power of the milling unit: 7,500 W, total height: 2,750 mm, milling spindle length: 90 mm, cutting width (max.): 450 mm, total width: 4,600 mm, saw blade diameter: 650 mm, overall weight: 8,000 kg, type of input current: three-phase, Equipment: safety light barrier, We offer a used Hundegger Speed-Cut SC 1 carpentry machine, model year 2004. Manufacturer: Hundegger Model: Speed-Cut SC 1 Year of manufacture: 2004 Gsdpfx Ake Ai Un Eohjkd Machine type: Carpentry machine If you have any questions or need more information, please feel free to send us a message or call us. The machine is in daily use, and everything is working perfectly. You are welcome to visit us to see it in operation. The machine operates on 400 Volts. Only the original Hundegger parts are included in the sale. The lifting table for infeed and outfeed is not included. The outfeed table is also not included in the sale. The conveyor belt to the cutoff station can be included if desired. The price is based on the buyer dismantling the machine themselves to facilitate easier reassembly. We can assist in getting the machine out of the building, and we have a forklift and wheel set that can help. Dismantling is planned for week 3 of 2027.

Condition: used, Year of construction: 1999, Description of Hundegger K1-A Equipment: 1. Cross-sections: 20 x 60 to 300 x 450 mm 2. Infeed cross conveyor: 7 strands, 2.2 m 3. Undercutting miter saw 4. Universal milling machine - Roller cutter - Finger cutter 5. Combination support for vertically operating tools - 1 drilling unit - 1 finger milling machine 6. Combination support for horizontally operating tools - 1 drilling unit - 1 slotting machine 7. Beam turning station, fully automatic Machine installation: 8. Substrate, foundation: - The base plate must have a thickness of at least 10 cm (with corresponding good reinforcement). - This should be level and suitable for anchoring. 9. Energy requirements, type, quality, quantity: 09.1 Electrical: - Voltage: 400/230 V, 3/N/PE - Fuse rating: 3 x 63 A - Frequency: 50 Hz - Peak demand: 15 kW - The mains voltage must be constant and uninterrupted within the specified tolerance range! 09.2 Compressed air: Gkjde Ah Swwjpfx Akhjd - Flow rate: V < 600 l/min - Pressure: Operating pressure p = 8.5 bar - Maximum permissible pressure p = 10 bar Important: The control system was updated by Hundegger from MIPPS to CAN in autumn 2020. Price ex works, location D-91154 Roth: 25,000.00 EUR

Condition: used, Year of construction: 1997, A timber framing machine with a beam turning station is offered. Equipped with: a 5-strand infeed cross conveyor (220cm), extendable timber support and extendable roller supports for timber lengths over 1000cm, an under-table swivel crosscut saw with an open base and a vibrating table, a universal milling unit with a roller cutter and a finger cutter, a combination support for vertically operating tools with two drilling units and a slotting unit, stop-side and operator-side marking units, a fully automatic beam turning station, a waste disposal control unit with operating buttons, a timber length measuring system, a 5-arm outfeed table. Inspection possible by arrangement. Gksdpfx Aj Ah H Rkekhsd

Condition: like new (used), Year of construction: 2006, functionality: fully functional, cutting height (max.): 120 mm, milling spindle length: 140 mm, cutting width (max.): 230 mm, overall weight: 1,421 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, type of input current: three-phase, Strugarka czterostronna SCM COMPACT P z 2006 roku, wyprodukowana we Włoszech. Maszyna przeznaczona do strugania, kalibrowania oraz profilowania elementów z drewna litego. Obróbka czterech stron w jednym przejściu sprawdzi się przy produkcji listew, kantówek i elementów stolarskich. Solidny stalowy korpus, długi stół podawczy oraz zamknięta obudowa strefy obróbczej. PARAMETRY TECHNICZNE: – szerokość robocza: 25–230 mm, – wysokość robocza: 6–120 mm, – minimalna długość elementu: 450 mm, – 4 wrzeciona: dolne, prawe, lewe i górne, – prędkość obrotowa wrzecion: 6 000 obr./min, – średnica wrzecion: 40 mm, – prędkość posuwu: 6–12 m/min, – długość stołu podawczego: 2 000 mm, – średnica rolek posuwowych: 140 mm, – długość robocza wrzecion pionowych: 140 mm, – długość robocza wrzecion poziomych: 250 mm, – głębokość profilowania na wrzecionach pionowych: do 20 mm. MOCE SILNIKÓW WEDŁUG KATALOGU: – dolny wał strugający: 4 kW, – wrzeciona pionowe: 5,5 kW, – górne wrzeciono poziome: 4 kW, – posuw: 0,75 kW. DANE TEGO EGZEMPLARZA Z TABLICZKI: – rok produkcji: 2006, – numer seryjny: AB/180894, – masa: 1 421 kg, – zasilanie: 400 V, trójfazowe, Gjdpfx Ae Ahgkhskhjkd – częstotliwość: 50 Hz, – prąd znamionowy: 46 A, – oznaczenie CE. WYPOSAŻENIE: – stół podawczy z prowadnicą wzdłużną, – obudowa ochronna z oknem kontrolnym, – panel sterowania, – wyłącznik awaryjny, – manometry i regulatory ciśnienia, – wskaźniki położenia przy regulacji, – króćce do podłączenia odciągu.

Condition: good (used), Year of construction: 2012, overall weight: 10,000 kg, Used TechnoTurn Machine equipment: Fixed portal. The following components are mounted on the portal: B-axis with 360° movement, automatically controlled by the CNC. The group carrier plate is mounted on the dovetail slide. “TURN” milling head for milling and sawing on all 6 sides of the workpiece. The milling head has the following features: Special milling unit with 2 independent outputs (A-B). A-output: Tool holder HSK 63 F for automatic tool changing, infinitely variable speed from 1000 to 18000 rpm. B-output: Flange mounting for the saw blade, max. Ø 600mm with programmable speed from 1000 to 4,000 rpm. Spindle power of 12 kW at 7000 rpm. Programmable speed from 1000 to 18000 rpm. Liquid cooling. C-axis rotation 540°. Z-axis travel 1200 mm. X-axis travel 800 mm. Inverter 22 kW for spindle control from 1000 to 18000 rpm. Technical data: Gksdpfx As Adrcgjkhed 7 controlled axes: 2X-Y-V-Z-B-A Axis travel X: 800 mm Axis travel Z: 1200 mm Rotation axis B: 260° Rotation axis A: 540° Maximum standard dimensions of the supports: 7,000 x 400 (h) x 240 mm. Maximum length of the supports with optional supports: unlimited. Minimum dimensions of the supports: 50x50 mm. Travel speed axis X: 63 m/min Travel speed axis Y-V: 102 m/min Travel speed axis Z: 68 m/min Rotation speed axis B: 12 rpm Rotation speed axis A: 28 rpm Electrical system: 400/50Hz ±5% Air consumption (6 bar): 400 l/min. Tool changer with 11 positions. Additional supports in the infeed and outfeed area. Processing of workpieces of virtually unlimited length. We will gladly answer any further questions upon request.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1877, cutting height (max.): 300 mm, total length: 18,500 mm, total height: 2,550 mm, cutting width (max.): 450 mm, total width: 2,400 mm, control cabinet width: 400 mm, saw blade diameter: 735 mm, overall weight: 11,000 kg, control cabinet length: 1,600 mm, control cabinet height: 2,400 mm, power: 15 kW (20.39 HP), type of input current: three-phase, Equipment: safety light barrier, Submitting a bid obligates the bidder to collect the machine by week 46. TECHNICAL DETAILS Machining area Cross-section: 20 × 60 to 300 × 450 mm Material feeding Feed cross conveyor: 7 strands Conveyor length: 2.2 m Saw unit Saw: Undercutting swivel miter saw Milling units Milling unit: Universal milling machine Tools for universal milling machine: Roller cutters and finger cutters Vertical combination support Drilling units: 1 unit Finger cutter: 1 unit Horizontal combination support Drilling units: 1 unit Grooving unit: 1 unit Workpiece handling Beam turning station: fully automatic Foundation and installation Minimum thickness of floor slab: 10 cm Requirement for floor slab: level, adequately reinforced and suitable for anchoring Electrical data Voltage: 400/230 V, 3/N/PE Fuses: 3 × 63 A Frequency: 50 Hz Peak demand: 15 kW Compressed air supply Gsdpfx As Aayqwekhjkd Volume flow: max. 600 l/min Operating pressure: 8.5 bar Permissible pressure: max. 10 bar Control system Retrofit: Autumn 2020 by Hundegger Control system: CAN control Previous control system: MIPPS

Condition: good (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 500 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 1,500 kg, The machine used to operate for 10 hours a week. Now it has been idle for 5 years. It is not in use. Gkodpfx Akoz I D E Iehed

Condition: refurbished (used), Machine is completely factory-reconditioned and comes with a warranty. Working area: 800 x 400 mm, length unlimited. 2 pcs. 5-axis spindles with 12 kW, 1,000-18,000 RPM, HSK 63F. Liquid-cooled. 2 pcs. 9-position automatic tool changer. Automatic loading and unloading stations, 13,500 mm. Includes tools and chain conveyor. Includes chip conveyor. Includes software update. Gsdpfoz Eatiex Akhokd Available on short notice.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, Essetre Techno Fast Machining Center, manufactured in 2026, exhibition machine with warranty, including installation/commissioning and training Machining area: 620x300mm, length unlimited 12 kW twin-spindle with 5 interpolating axes, liquid-cooled 1,000-18,000 RPM Automatic 11-position tool changer including machining tools Chip conveyor in the machine Automatic central lubrication Short delivery time Godpfx Asz Eakuekhjkd

Condition: like new (used), Year of construction: 2020, operating hours: 1,329 h, functionality: fully functional, Equipment: safety light barrier, Hundegger SC 3 Speed-Cut – model year 2020, for sale due to new acquisition in May 2027. We are selling our fully automatic cutting system, Hundegger SC3 Speed-Cut, model year 2020. Machine equipment: - SC 3 Fully automatic cutting system, base machine with 5-axis sawing unit – mirrored version - Hundegger production software CAMBIUM - Automatic cross-section control, Y-axis - Central lubrication - Combination support for vertically operating tools - Vertical finger milling cutter, 5.5 kW - 4-axis turret milling unit, 7.5 kW - Combination support for horizontally operating tools - Drilling unit, 2.2 kW, drilling direction horizontal - Marking device, bottom - Marking device on horizontal support Gsdpfx Akjz Dga Tjhskd - Inkjet labeling system Inkjet 4 from the rear - Automatic feeding of small components to the front - Wood storage blocks with rollers after feeding - Control unit for disposal with operating buttons Retrofit in May 2023 for €8,500: SC 2100 Drilling unit, 2.2 kW, drilling direction vertical on combination support for drilling up to 24 mm 4-side inkjet labeling system Inkjet 4 FEEDING SYSTEM ALSO INCLUDED IN THE PRICE!!! BEBL feeding system, transverse and vertical General: Year of manufacture: 2020 Operating hours: low, approx. 1329 hours (machine from ongoing operation) Material processed: 2272 cubic meters Routine maintenance by Hundegger Condition: very good, like new Contact: Holzbau Gutmann GmbH Reulbacherstraße 18 36115 Hilders

Condition: like new (used), Year of construction: 2024, functionality: fully functional, For sale is a like-new Hundegger Speed-Cut SC480, including a fully automatic loading system, Pick & Feed 1000. Gjdjz Da Htepfx Akhskd Speed Cut SC480 Processing range: - Timber cross-sections from 20 × 40 mm to 240 × 480 mm - Timber lengths up to 13 m Equipment: - 5-axis sawing unit - Infeed and transfer cross conveyor for timber lengths up to 13 m - Hydraulic lifting table for timber lengths up to 13 m - Combination support for vertically operating tools - Drilling unit 3 kW, drilling direction vertical - Vertical finger milling cutter 6.5 kW - 4-axis revolving milling cutter 7.5 kW - Drilling unit 3 kW, drilling direction horizontal - Single-blade milling cutter - Marking device at the rear - Inkjet labeling system HP (from the rear) - Label printer at the control panel - Central lubrication - Additional screen at the control panel - Additional screen in the discharge area - Floating dust extraction Pick & Feed 1000 Fully automatic loading system: - For timber lengths up to 13 m - 10 rack positions Special features: - System has been in operation since January 2025 - Extensive special equipment - Immediately ready for use - Ideal for timber construction, prefabricated construction, and joinery businesses Inspection: The machine can be inspected by appointment. We will gladly provide further technical information, photos, or videos. Location: Switzerland, Canton of Bern

Condition: excellent (used), functionality: fully functional, 4 spindles: bottom/right/left/top Chromed tables Working width: 130 mm Working height: 100 mm Feed speed regulated by inverter up to 36 m/min Spindle diameter: φ40 mm Total power: 16.8 kW Gkodpezz Nq Ssfx Akhed Year of manufacture: 2021 Weight: 2550 kg

Condition: excellent (used), functionality: fully functional, cutting height (max.): 130 mm, total length: 2,000 mm, total height: 130 mm, cutting width (max.): 230 mm, total width: 230 mm, overall weight: 3,000 kg, SCM Superset 23 – Four-Sided Planer – 5 Heads – 230 × 130 mm – FOUR-SIDED PLANING MACHINE! Professional SCM Superset 23 four-sided planer, renowned Italian manufacture. The machine is equipped with 5 spindles, stepless feed rate adjustment via a frequency inverter, and electric thickness setting. A robust feed system and pneumatic roller pressure ensure stable and precise guidance of the workpiece. The planer is used and in very good technical condition. The machine is suitable for professional wood processing in carpentry workshops, sawmills, and for the production of structural elements, moldings, boards, and timbers. KEY PARAMETERS: - maximum workpiece width: 230 mm - maximum workpiece height: 130 mm - number of spindles: 5 - spindle diameter: 40 mm - stepless feed rate adjustment via a frequency inverter - electric thickness setting - pneumatic roller pressure - central table lubrication - long infeed table: 1980 mm - machine enclosed in a cabinet SPINDLE ARRANGEMENT: Bottom horizontal spindle - working width: 230 mm - motor power: 4 kW Right vertical spindle - working height: 130 mm Left vertical spindle - working height: 130 mm - total power of the 2nd and 3rd spindles: 7.5 kW Top horizontal spindle - working width: 230 mm - motor power: 5.5 kW - electric up/down adjustment Bottom horizontal spindle - working width: 230 mm - motor power: approximately 5.5 kW All spindles have adjustment in the appropriate directions: up/down and left/right. FEED SYSTEM: - 6 top metal, toothed feed rollers - double top discharge roller – smooth, rubber - 2 bottom rubber pull rollers - 2 bottom side pressure rollers - pneumatic roller pressure - stepless feed rate adjustment via a frequency inverter - feed motor: 3 kW OTHER TECHNICAL DATA: - body lifting motor: 0.37 kW - length of the infeed table: 1980 mm Godpfx Aezzx Iyskhskd - central table lubrication - dust extraction port diameters: 5 × 130 mm - machine dimensions: 3600 × 1800 × 1750 mm - weight: approximately 3000 kg - country of manufacture: Italy - condition: used, very good Gross price, VAT margin. The machine is available from JBS Maszyny Stolarskie. We invite you to contact us by phone. You can view and inspect the machine before purchasing. We also assist with organizing transportation. JBS WOODWORKING MACHINERY Sale of professional woodworking machines

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, overall weight: 8,000 kg, Hundegger SC1 Year: 2005 Godozzx Dbspfx Akhokd It is being sold in excellent condition as seen in the pictures. We will help you disassemble and load the machine.

Condition: used, Year of construction: 2006, Timber processing machine Manufacturer: Hundegger Type: K2-4-450 Year of manufacture: 2006 Technical data - Maximum timber length for feeding: 13 m - Maximum timber length for stacking: 12 m - Color: RAL 5012 blue - Infeed cross conveyor, 5 strands, horizontal, 2.2 m with flat belt chain - Infeed strand with shaft extension - Extension support with infeed device - Undercarriage swivel miter saw - Universal milling machine, 4-axis, UF4 - Roller cutter - Finger cutter - Dovetail cutter - Combination support for vertically operating tools - Drilling unit, 2.2 kW - Drilling unit, 3.0 kW, reinforced - Combination support for horizontally operating tools - Drilling unit, 2.2 kW - Slotting unit - Marking unit - Stacking table, 6-arm - Fully automatic beam turning station, pneumatic - Refined timber support surfaces - Label printer Gkedpfx Akjzzcx Ajhod Note: The technical data and descriptions are a verbatim transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 9615, total length: 31,200 mm, total height: 2,300 mm, total width: 4,600 mm, overall weight: 9,000 kg, Equipment: rotational speed infinitely variable, safety light barrier, SC3-200-5 fully automatic cutting system Angle and inclination drive for the sawing station Automatic infeed system Feed cross conveyor (6 strands, wood length up to 14 m) Component support for small cross-sections Gksdpfezyihuox Akhsd Control unit for waste disposal Conveyor belt for waste disposal (integrated) 6-arm stacking table (wood length up to 10 m) Combination support for vertically operating tools 2x Vertical drilling unit 2.2 kW 2x Vertical chain mortiser 5.5 kW Additional combination support, vertical, for rotary milling cutter Rotary milling head 7.5 kW Combination support for horizontally operating tools 2x Horizontal drilling unit 2.2 kW Marking device, rear Marking device, bottom Marking device, front Angled conveyor, right

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,300 h, functionality: fully functional, workpiece weight (max.): 5,000 kg, cutting height (max.): 250 mm, total length: 350 mm, total height: 300 mm, cutting width (max.): 420 mm, total width: 50 mm, control cabinet width: 220 mm, saw blade diameter: 450 mm, rotational speed (min.): 3,000 rpm, overall weight: 5,000 kg, type of input current: three-phase, Weinmann WBZ160 POWERSIX machining/sizing center. Year 2019. Approximately 3300 operating hours. Gedpezwf Acsfx Akhskd Serviced in July 2026 by a HOMAG technician (report available upon request). Very good overall condition. Fully functional. Machine has already been disassembled and is ready for loading (packaging done according to supplier specifications). Transport will require 2 covered semi-trailers (to be arranged and paid for by the buyer).

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1877, cutting height (max.): 300 mm, total length: 18,500 mm, total height: 2,550 mm, cutting width (max.): 450 mm, total width: 2,400 mm, control cabinet width: 400 mm, saw blade diameter: 735 mm, overall weight: 11,000 kg, control cabinet length: 1,600 mm, control cabinet height: 2,400 mm, power: 15 kW (20.39 HP), type of input current: three-phase, Equipment: safety light barrier, Equipment: 01_ Cross-sections 20 x 60 to 300 x 450 mm 02_ Feed conveyor, transverse, 5 strands, 2.2 m Gedjzv Tt Hjpfx Akhokd 03_ Undercutting miter saw 04_ Universal milling machine ----> Roller cutter ----> Finger cutter 05_ Combination support for vertically operating tools ----> 1x Drilling machine ----> 1x Finger milling machine 06_ Combination support for horizontally operating tools ----> 2x Drilling machine ----> 1x Grooving machine 07_ Beam turning station, fully automatic Machine installation: 08_ Substrate, foundation: ----> The floor slab must have a thickness of at least 10 cm (with corresponding good reinforcement) This should be level and suitable for anchoring. 09_ Power requirements, type, quality, quantity: 09.1_ Electrical: ----> Voltage: 400/230V, 3/N/PE ----> Fuse rating: 3 x 63A ----> Frequency: 50 Hz ----> Peak demand: 15 kW The mains voltage must be constant and uninterrupted within the specified tolerance range! 09.2_ Compressed air: ----> Flow rate: V < 600 l/min ----> Pressure: Operating pressure p = 8.5 bar; Maximum permissible pressure p = 10 bar Important: The control system was converted by Hundegger from MIPPS to CAN control in the fall of 2020!!

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, KRÜSI chalet building machine / log house production line type CM 40 Year of construction 2002 Krüsi CM40, consisting of the following components: Circular saw ( cross-cut saw ) Horizontal and vertical log house router Groove milling machine (horizontal) boring mill Infeed table 6m Outfeed table 6 m KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE-marked Ie Dkovfv Tfjk Ddfetk Condition: good, technically checked and cleaned / ready for use Functional principle Processing of wood for chalet construction / log house construction The beams can be processed in a single operation - Cutting to length - Horizontal and vertical milling of necks / grooves in one clamping operation - Drilling - Milling the face grooves Workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for maximum machining accuracy. Slide guidance with dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for use, with contactor control, motors protected by thermal relay. Electrical equipment for voltage 380 V, 50 Hz, with protective covers, Central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed, electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely variable. Fully wired and installed, including air maintenance unit. Patches with a thickness of more than 14 cm must be processed in two tensions. Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analog dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide-tipped with cutting depth limiter (synchronous operation) Adjustable riving knife Motor speed min. 1 / 2900 Power kW 2.2 2nd CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal trimming unit Milling cutter Ø 180mm Milling cutter width max.130mm From cutter width 60 mm only use aluminum alloy cutters with reversible cutting edges Gedpfxozvrf Ij Akhokd 2 hydropneumatic feed motors kW 2.2 each Hydropneumatic feed Rapid traverse and work feed infinitely adjustable 3rd drilling unit: Manual feed Spindle adjustment with analog dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1.8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Cutter Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3.0 2 V-belts SPZ 9.5x1000 La Pneumatic Operating pressure on site min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Condition: good (used), Year of construction: 1992, functionality: limited functionality, machine/vehicle number: 1200, Hundegger P10 – Year of manufacture 1992 – partially modernized control system – good mechanical condition For sale: well-maintained Hundegger P10 cutting machine, year of manufacture 1992, with extensive equipment. Mechanical components in good condition, control system modernized (data import via USB drive, DOS conversion). 3 measuring scales are missing – the price reflects this. The machine is currently still in operation and can be tested on-site. Technical equipment: Swivel saw, notching milling cutter, rafter nail drilling unit, edge bender, blade milling cutter, horizontal and vertical drill Three-sided cutter, vertical milling cutter, finger cutter, panel cutter, ejector and transverse conveyor For an additional charge, the machine can be delivered throughout Europe – Gedpfxezu Anwj Akhjkd Delivery does not include unloading or assembly. Currently, the cutting system is being dismantled for transport and temporarily stored. A demonstration in operation is no longer possible. However, a video in processing mode can be provided for a better assessment.

Condition: good (used), Year of construction: 1987, functionality: fully functional, For sale: well-maintained REX ZA-800/S cutting machine, manufactured in 1987. Gkedpfx Akezux Hcshed The machine is fully functional and currently still in operation. It is in good condition and available immediately upon agreement.

Condition: good (used), Dry sorting line with 22 pockets. Gksdozuk T Uepfx Akhjd

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1711, This industrial multi-blade band sawmill line (multi-head band resaw) is designed for high-volume log and timber resawing. Constructed on a robust steel frame, the machine features a highly efficient 8-head configuration, where each individual cutting unit is powered by its own dedicated electric motor for maximum performance. The machine is equipped with 15 kW motors and operates with standard 38 mm x 5025 mm saw blades. A key technical advantage of this line is its versatility: every other saw head can be tilted up to 30 degrees. This specific function allows the machine to cut diagonal FE (featheredge / weatherboard) boards up to 175 mm in width. Gjdpfx Ajzudynekhjkd Material feeding is handled by a heavy-duty steel chain conveyor system that ensures stable and precise timber positioning throughout the cutting process. Manufactured in Latvia, the machine is completely ready for continuous professional sawmill operation. It is still connected and can be started.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, warranty duration: 12 months, total length: 7,500 mm, total height: 700 mm, total width: 3,600 mm, BOOSTON ER-02/750 – STATIONARY ASSEMBLY TABLE, 7.5 m, FOR PREFABRICATION OF HOUSES BOOSTON MACHINERY is a manufacturer of machines and equipment for prefabricated house plants. We produce stationary assembly tables, rotary tables, butterfly tables, and complete production lines for the prefabrication of timber structures. ## TECHNICAL SPECIFICATIONS Gksdoztpwpopfx Akhed ➡️ Working length of the table: 7500 mm Other available lengths: 3.0 m / 4.5 m / 6.0 m / 7.5 m / 9.0 m / 10.5 m / 12.0 m / 13.5 m / 15.0 m ➡️ Working height of the table: 700 mm (adjustment ±50 mm) ➡️ Working width of the table: 3600 mm – other widths can be manufactured ➡️ Height range of the prefabricated wall using the SD-01 clamping cylinder: 600–3400 mm ➡️ Vertical locking pins: 0–240 mm, diameter 35 mm (adjustable) ➡️ Horizontal transport of finished elements – optional: set of pneumatically lifted rollers – 2 rows of rollers at the edges of the table ➡️ Table type: stationary table ➡️ Pneumatic supply: 8 BAR – for the ER-02R version equipped with rollers for horizontal transport ➡️ Maximum permissible load: 100 kg/m² of finished prefabricated element, with a maximum element height of 3000 mm ## ADDITIONAL OPTIONS 1. SD-01 clamping cylinders 2. Set of pneumatically lifted rollers from the table surface – 2 rows of rollers BOOSTON ER-02 The ER-02 stationary assembly table is a versatile workstation designed for the prefabrication of walls and other elements in timber frame construction. The modular design of the work platform allows for expansion of the workstation and connection to other BOOSTON assembly and rotary tables, creating a complete production line. The ER-02 table is available in lengths from 3 to 15 meters. The standard work area, along with the support, enables the prefabrication of elements up to 3400 mm in height using the SD-01 clamping cylinders. We manufacture our machines in Poland. Manufacturer: BOOSTON MACHINERY

Condition: like new (used), Year of construction: 2025, operating hours: 25 h, functionality: fully functional, machine/vehicle number: 241115, feed length X-axis: 40,000 mm, warranty duration: 6 months, total length: 10,000 mm, total height: 3,350 mm, type of input current: three-phase, Equipment: CE marking, Semi-automatic tilting table for wall panel assembly, timber frame construction, maximum size 4000x10000mm - Working height 700mm - 3 positions: 0° - 80° - 92° - Adjustable travel up to 40 meters - 2 remote controls - Ground rails and guides - 4 drive wheels Godpfx Akeznvx Nshekd - LENZE motor - LENZE control unit - Hydraulic unit and control cabinet integrated - Cable reel - Human-Machine Interface - Manufacturer's warranty: 6 months - Installation and commissioning available