2
Injection molding machine, injection molding machine, plastic injection molding machine, plastic injection molding machine, plastic injection molding press
-Closing force: 60 to
-Screw diameter: 50 mm
-Control: Unilog 4000
Msifww
-Spar distance: 320x320 mm
-Core pull
-Data collection terminal
12
Injection Unit
Screw diameter 34 mm
Stroke volume 111 cm^3
Injection pressure 206 bar
Bqesrancon
Clamping Unit
Clamping force 80 kN
Opening stroke 310 mm
This HAITAIN HTF80XA injection moulding machine was manufactured in China in 2007. The machine has a clamping force 80 kN and an opening stroke of 310 mm. It has an injection pressure of 206 bar and a screw diameter of 34 mm.
Application Types
Injection Moulding
4
screw diameter: 28 mm
injection shot weight in Polysterol: g/PS
closing pressure: kN
lockforce: 22 t
moulding weight: 40 g/PS
daylight between columns: 258 mm
cylinder head volume max.: 49 ccm
injection pressure: 930 bar
tank: 125 l
total power requirement: 8,5 kW
weight of the machine ca.: 0,7 t
space requirements of the machine approx.: L:2,3xB:0,75xH:3,4 m
Injection molding machines with protective grid
Processing of materials:
thermoplastics, elastomers, PVC, processing of rubber and/or the...
3
Netstal Synergy S 1200-460 year 2001 - has 107.402 operating hours (as of today).120 to.
0jzhbwi
3
Battenfeld BA 2000 / 1000 CDC plastic injection molding machine,
Year of manufacture 1999,
control Unilog B 4,
screw stroke 220 mm,
screw Ø 60 mm,
used spare screw available,
some spare parts,
injection pressure 1633 bar,
max. spray weight 566 g,
nozzle stroke 400 mm,
Bt8z9gp7db
screw torque 1613 Nm,
7
Arburg Edrive 370 600-290
- Year of manufacture 2015
- 29.120 operating hours (as of 19.04.2021)
- very well maintained condition
Technical data:
- clear column distance 370mm
- max. tumbler 600 kN
- Screw diameter 35 mm
Special options/equipment:
- Plasticizing barrel set 35 mm (without nozzle) in highly wear-resistant design with sintered metal-equipped non-return valve, i.e. highly wear- and corrosion-resistant for processing thermoplastics with highly abrasive or corrosive components...
5
Injection molding machine, injection molding machine, plastic injection molding machine, plastic injection molding machine, plastic injection molding press
-Closing force: 60 to
-Unilog control: 4000
-Spar distance: 490x490 mm
-Core pull
-Data collection terminal
Hivbtnp9o
-Weight: 4 to
4
General Data
Measurements width 4900 mm
Measurements depth 1750 mm
Measurements height 2100 mm
Machine weight 6800 kg
Clamping Unit
Clamping force 130
Rh8qad9b
This Krauss Maffei 130-1000 CX DUR Injection Moulding Machine was built in the year 2017. It has 3000 working hours. This machine can work with a injection pressure of 2304 bar and a clamping force of 130 kN.
Application Types
Injection Moulding
5
Plastic Injection Moulding Machine
Clamping force 204 T
Screw diameter 55 mm
Tie bar spacing (H) 470 mm
Tie bar spacing (V) 470 mm
Shot volume 427 cm³
Shot weight 360 g
Pressure on material 1600 bar
Platen length 715 mm
Platen width 715 mm
Opening of the press 650 mm
Mould size 250 mm min
-----
Length x width x height 5300.0 × 1700.0 × 2000.0
Weight 4500 kg
Video in production is available on Whatsapp Only
Price 5,999.00 ( Loaded to Transport )
Eg0khkv8o
5
4 days left
1 injection moulding machine, make Arburg Allrounder, type 270S 250-60, serial no. 192839, year of construction: 11/2003, operating voltage: 400V 50Hz, control voltage: 230V 50 Hz, control voltage: 24V, rated current motor-heating: 53,0/25,0A, total rated current: 78,0A, total connection: 47,0k
Bhz7m7ws
6
Used machine in good condition. Available for immediate delivery.
- Clamping force: 2.000 kN
C0pcibx
- Shot weight max: 476 g
- Injection rate: 285 cm³/s
- Injection pressure: 1.904 bar
- Injection volume: 523 cm³
- Screw speed: 278/398 rpm
- Mould opening stroke max: 700 mm
- Mould height max: 700 mm
- Mould height min: 350 mm
- Daylight between platens max: 1.050 mm
- Platen size (h x v): 985 x 985 mm
- Distance between tie-bars (h x v): 630 x 630 mm
- Ejector force: 110 kN
- Mold opening forc...
2
Catalog No. : 5346
Type: 350 V/050V
Producer: Battenfeld
Made in: 1998
Characteristic:
Clamping force: 3.5 t
Injection weight: 30.4 g
Height of the plate for mounting the mold: 450 mm
Width of the plate for mounting the mold: 400 mm
Distance between the columns (horizontal): 304 mm
Distance between the columns (vertical): 254 mm
Screw diameter: 22 mm
Maximum injection pressure: 1488 bar
Machine length: 2960 mm
Btmlksf7vf
Machine width: 1250 mm
Machine height: 1800 mm
Weight of the in...
4
Injection molding machine
Qkwlqfhyl
-Closing force: 25 to
-Screw diameter: 22 mm
-Control Unilog 2040
-Spar distance: 250x250 mm
-Data collection terminal
-Parts removal device make ASS
-Temperature control device make Single
5
Injection moulding machine
Ferromatik
K-tec-1100-490 Milacron
Bssjksx9ox
BJ 2000
Technical data:
screws Ø 45mm high wear resistant
- opening stroke: max. 800mm
- mould height: min. 250mm
- operating hours: approx.83.931 hours
8
Plastic Injection Moulding Machine
Krauss Maffei 110 Ton Year 2004
KM 110 220/55 CZ Multijet
Year 2004
Twin shot machine
Double core pull
25mm and 15mm screw diameters
53gr and 14.5gr shot weights
42.96kW motor
345 litres of grade 46 oil
Min mould height is 400 (280)
Brwai9pyv3
Max mould height is 1000 (880)
Tie bar spacing 530 x 470mm
Ejector stroke 150mm
Price : 11,999
Video in production is available on Whatsapp Only
Price 11,999.00 ( Loaded to Transport )
8
Controller CC100
Pressing force 60 T
Diameter of screw D30 mm
O8k9f
Plate length 720 mm
Plate width 600 mm
Opening of the presses 450 mm
Pump power 15 kW
Weight 5200 kg
Machine size LxWxH 4000 x 1400 x 2000 mm
6
Used machine in good condition. Available for immediate delivery.
- Screw diameter: 22 mm
- Shot weight max: 35 g
079wwfal
- Injection rate: 78 cm³/s
- Injection pressure: 2.060 bar
- Injection volume: 38 cm³
- Screw speed: 360 rpm
- Screw L/D ratio: 18,7
- Nozzle stroke / force max.: 28 mm / kN
- Nozzle stroke max: 200 mm
- Clamping force: 500 kN
- Mould opening stroke max: 600 mm
- Mould height min: 200 mm
- Heating zones: 4
- Platen size (h x v): 500 x 350 mm
- Ejector force: 40 kN
- Contro...
2
Machine is in perfect condition, ready to be shipped to customer in any time.
Main parameters:
- Clamping force - 220 kN
Bth78sndkz
- Dimensions of the table plates max: 400x440 mm
- Closing system: hydraulic
- Weight: 1,500 kg
For an additional fee we are offering a door to door delivery with the machine locating in a designated place at the customer's production hall.
5
Injection molding machine, injection molding machine, plastic injection molding machine, plastic injection molding machine, plastic injection molding press
-Closing force: 50 to
-Opening path: 375 mm
37zbvoln
-Plate size: 375/430 mm
-Machine weight: 3 to
3
KM 80 c1 BJ 1999
800 KN
Bsptdpskfn
54.185h (Status 11/2020
13
BATTENFELD Microsystem 50 / electric machine / operating hours: 1,587
Year of construction: 2001
Injection unit:
Screw diameter: 14 mm
Shot weight: approx. 1 g
Spray pressure: 2500 bar
Dosing volume: 1.1 ccm
Clamping unit :
Clamping force : 5 t
Size of the clamping plates: 196x364 mm
Ejector: electric
Clamping unit: toggle lever
Control: UNILOG B4
Additional equipment:
Electric machine
Low number of operating hours: 1,587 - Training machine
Production process takes place in a clean room environm...
7
Controller SELOGIKA with TFT screen and CF card leser
Closing force 40T
Diameter of screw D22 mm
Btgfch9h27
Diestance between columns 270 x 270 mm
Voltage 400V / 3 Phasys
Total power amount 43 A
Total power consumption 24 kW
6
Used machine in good condition. Available for immediate delivery.
- Screw diameter: 22 mm
- Shot weight max: 35 g
- Injection rate: 78 cm³/s
- Injection pressure: 2.060 bar
- Injection volume: 38 cm³
- Screw speed: 360 rpm
- Screw L/D ratio: 18,7
- Nozzle stroke / force max.: 28 mm / kN
- Nozzle stroke max: 200 mm
- Clamping force: 500 kN
- Mould opening stroke max: 600 mm
- Mould height min: 200 mm
- Platen size (h x v): 500 x 350 mm
- Heating zones: 4
- Ejector force: 40 kN
- Control: CC100 ...
6
Volume d'injection : 15 cm3
K9icj7it
Diamètre de la vis : 25 mm
Volume d'injection : 30 cm3
Pression d'injection : 1000 bars
Course d'injection : 36 mm
Force du vérin d'injection : 4900 dN
Longueur de la vis : 360 mm
Puissance de chauffe : 3,35 kw
Nombre de zones de chauffe régulées : 3
Pression hydraulique maximum : 160 bars
Contenance de la trémie : 10 litres
5
Injection molding machine, injection molding machine, plastic injection molding machine, plastic injection molding machine, plastic injection molding press
-Closing force: 90 to
-Microcontrol control: MC 3
-Opening path: 610 mm
-Plate size: 525/570 mm
Dyfaydl
-Machine weight: 4.4 to
4
a Battenfeld TM1000/525 for sale!
Machine is still in operation. And runs every day 10-11 hours.
Expected sale in approx.
Bumh0y9y
9-10 weeks.
Against arrangement possibly also earlier.
Defects: Proportional valve (dosing / injection) hangs from time to time. By a light hammer blow - to eliminate.
This valve would have to be replaced if necessary.
Machine runs like clockwork !!!
No major failure since commissioning in 1999 !
Screw diameter: 40 mm
The small screen works, the computer screen was m...
4
Beautiful Dr. Boy 2C XS DEMO second component injection unit.
The 2K unit can temporarily turn any injection molding machine into a 2K machine. Compatibility on: ENGEL, ARBURG, KM, DEMAG, etc.
Basic information:
Working hours: 50
Control panel: Procan ALPHA 4
WARRANTY: 12 MONTHS
Technical information:
Screw diameter: 16 mm
Max. injection force: 1549 Bar
Kyuzqvwo
Max. dosing volume: 8 cm³
Max. shot volume (PS): 7,3 Gr.
Extra options:
* Open nozzle with inside thread and R35 insert incl. heater...
1
Manufacturer: Battenfeld
Ome37
Type of machine: BA 250 - 050 CDC
Year: 1996
Delivery time: Immediately
Terms of Delivery: Ex Works
Location: Awans - Belgium
Controlversion: Unilog 4000
Screen text: Dutch
Operating Hours 86.000 Hrs.
Price: on request
Technical details
Clamping unit
Clamping force: 250 kN
Size of mould platens (h x v): 440 mm. x 440 mm.
Distance between tie bars (h x v): 270 mm x 270 mm
Mould opening stroke: 325 mm
Mould height min.: 125 mm
Mould height max.: mm
M...
6
Used machine in good condition. Available for immediate delivery.
- Screw diameter: 22 mm
- Shot weight max: 35 g
- Injection rate: 78 cm³/s
- Injection pressure: 2.060 bar
- Injection volume: 38 cm³
- Screw speed: 360 rpm
- Screw L/D ratio: 18,7
- Nozzle stroke / force max.: 28 mm / kN
- Nozzle stroke max: 200 mm
- Clamping force: 500 kN
- Mould opening stroke max: 600 mm
- Mould height max: n/a mm
- Mould height min: 200 mm
- Distance between tie-bars h: n/a mm
- Distance between tie-bars v: ...
12
Babyplast
year2003
B9usufn
Spray unit for 2K
3
3 Monate Teilegarantie Generalueberholt
Boy 22 S Dip
Plastifiziereinheit 24
offene Duese R35
Auswerfer 80 mm Hub
Wasserverteiler 4 fach
Düsenverschlusszylinder
Ölstand + Temperatur Überwachung
Dekompression
Ausschrauben eine Drehrichtung mit Zwischenstopp
Ausblasvorrichtung
H2kacs2
Lichte Weite zw. den Holmen: 254 mm
Schließkraft 220 KN
4 Maschinenfüße
2 Cekon Steckdosen 16 A
380V / 50 Hz
" Bilder zum Vergleich"
2
Boy 22A ( Nr. 111)
Ability to work horizontally and vertically
Year of production: 2005
TECHNICAL DATA
Bq3mby32jv
Screw Dia [mm]: 22
Shot Weight [g]: 28,45
Injection Pressure [bar]: 1732
Clamping Force [kN]: 220
Tie Bar Distance [mm]: 254
Platen Size [mm]: 220 x 400
Mould Height min. [mm]: 200
CONTROL
Type of Controls: Procan CT
Monitor: Yes
Control Cabinet: Yes
Language: German
OTHER
Power [kW]: 9,05
Workinghours [h]: 13154
Weight [kg]: 880
8
Not much use.
Photo with the characteristics
Bi7rsspsxz
1
Manufacturer: Battenfeld
Type of machine: BA 200 / 50 CD Plus
Year: 1990
Delivery time: Immediately
Terms of Delivery: Ex Works
Location: Awans - Belgium
Glcfvqiui
Controlversion: Unilog 4000
Screen text: German / Englisch
Operating Hours 16.865 Hrs.
Price: on request
Technical details
Clamping unit
Clamping force: 200 kN
Size of mould platens (h x v): 400 mm x 400 mm
Distance between tie bars (h x v): 254 mm x 254 mm
Mould opening stroke: 325 mm
Mould height min.: 125 mm
Mould h...
6
Used machine in good condition. Available for immediate delivery.
- Screw diameter: 65 mm
- Clamping force: 2.500 kN
- Shot weight max: 1.072 g
- Injection rate: 3.100 cm³/s
- Injection volume: 1.128 cm³
Fq3r7vj
- Mould height max: 650 mm
- Mould height min: 200 mm
- Platen size (h x v): 910 x 840 mm
- Heating zones: 4+1
- Distance between tie-bars (h x v): 630 x 560 mm
- Control: 0
- Oil tank capacity: 800 l
- Operating hours: 0
- Weight: 14.500 kg
- Dimensions (long x wide x high): 7.395 x ...
7
Working hours: 85284
Lenght: 3,3m
Width: 1,10m
Cylinder: D25
Injection capacity : 69m3
Clamping force: 40t
Opening stroke: 350mm
Minimal mould hight: 150mm
Daylight: 500mm
Ejector stroke: 100mm
Or39h
Platen size standard: 550 x 430
Screw and cylinder with corrosion resistance D25
1x air valve
Compressed air regulator
Water flow manifold 4 krogi –
Ejector coupling
1x 1F socket
1x 3F socket
Visual and acoustic alarm
4
6 monht waranty on parts
Used, remanufactured Boy 22 M VV Procan Control
Plastification unit 18 mm, open nozzle R 1/2"
Decompression
Coolant manifold 4 times
Material hopper
Hydraulic ejector 80 mm with stroke limitation
Clear width between tie bars: 254 mm x 254 mm
N9fwvxfp
4 Leveling pads
Closing force 220 KN
400V 50 Hz
"phots as example"
1
Manufacturer: Engel
Type of machine: ES 80 / 20 HL S
Year: 1994
Delivery time: immediately
Terms of Delivery: EX Works
Location: B - 4340 Awans
Controlversion: EC 88-S
Screen text: Dutch
Operating hours: hrs.
Price: on request
Technical details
Clamping unit
Clamping force: 200 kN
Size of mould platens (h x v): 470 mm x 380 mm
B0302sje
Distance between tie bars (h x v): HL
Mould opening stroke: 330 mm
Mould height min.: 150 mm
Max daylight: 480 mm
Hydraulic ejector - stroke: 70...
6
Duromer Injection Unit (it is possible to change to standard Injection Unit).
Including:
- Mould injection pressure monitoring
- Hydraulic and pneumatic core pullers
- Eñectric Mould heating
- Interface for temperature control units
Gcyyphf
- INtegrated cacuum pump
- Roto feeder for BMC feeding
- Clamping force: 2.600 kN
- Screw diameter: 105 mm
- Injection rate: 1.022 cm³/s
- Injection pressure: 1.163 / 1.469 bar
- Injection volume: 3.550 cm³
- Screw speed: 110 rpm
- Ejector stroke / force max...
1
6 Monate Teilegarantie Generalueberholt
Boy 22 M Procan Control
Plastifiziereinheit 18 mm
offene Duese
Auswerfer 80 mm mit Hubbegrenzung
Wasserverteiler 4 fach
Dekompression
Lichte weite zw.d.Holmen 254mm x 254mm
220 KN
Bfxhk03tzi
400v 50 Hz
" Bilder zum Vergleich"
1
Manufacturer: Battenfeld
Type of machine: BA 150 / 050 Plus
Year: 1991
Delivery time: Immediately
Terms of Delivery: Ex Works
Location: Awans - Belgium
Controlversion: Unilog 4000
Bkxgrssh8p
Screen text: Dutch
Operating Hours Hrs.
Price: on request
Technical details
Clamping unit
Clamping force: 150 kN
Size of mould platens (h x v): 330 mm x 300 mm
Distance between tie bars (h x v): 185 x 155 mm
Mould opening stroke: 220 mm
Mould height min.: 184 mm
Mould height max.: mm
Max da...
6
Used machine in good condition. Available for immediate delivery.
- Screw diameter: 30 mm
- Shot weight max: 77 g
Ia0e82mx
- Injection pressure: 2.500 bar
- Injection volume: 85 cm³
- Ejector stroke / force max.: 22 / 10 mm / kN
- Daylight between platens max: 550 mm
- Heating zones: 3.200 x 1.310 x 1.800
- Platen size (h x v): 540 x 540 mm
- Distance between tie-bars (h x v): 321 x 321 mm
- Mold opening force: 40 kN
- Control: MC4
- Oil tank capacity: 170 l
- Power: installed max: 15 kW
- Wei...
2
6 month parts warranty Remanufactured
Be38otzx9x
Boy 22 D
Plastification unit 24 mm
open nozzle R 35 Duese
Ejector 80 mm
Waterdistributor 4-fold
220 KN
400v 50 Hz
" photos for example"
1
Manufacturer: Battenfeld
Type of machine: BA 230 / 50 CD
Year: 1992
Delivery time: Immediately
Terms of Delivery: Ex Works
Location: Awans - Belgium
Controlversion: Unilog 2040
Screen text: -----
Operating Hours 54.022 Hrs.
Price: on request
Technical details
Clamping unit
Clamping force: 230 kN
Size of mould platens (h x v): 440 mm x 250 mm
Distance between tie bars (h x v): 254 mm
Mould opening stroke: 325 mm
Mould height min.: 125 mm
Mould height max.: mm
Max daylight: 450 m...
6
Used machine in good condition. Available for immediate delivery.
- Screw diameter: 30 mm
- Shot weight max: 77 g
- Injection pressure: 2.500 bar
- Injection volume: 85 cm³
- Ejector stroke / force max.: 22 / 10 mm / kN
- Daylight between platens max: 550 mm
Bsixsy9ii0
- Platen size (h x v): 540 x 540 mm
- Heating zones: 3.200 x 1.310 x 1.800
- Distance between tie-bars (h x v): 321 x 321 mm
- Mold opening force: 40 kN
- Control: MC4
- Oil tank capacity: 170 l
- Power: installed max: 15 kW
- W...
4
6 Monate Teilegarantie Generalueberholt
Boy 25 M Procan Control
Plastifiziereinheit 24 HV
offene Duese
Auswerfer 80 mm
Wasserverteiler 4 fach
Dekompression
Lichte weite zw.d.Holmen 254mm x 254mm
250 KN
400v 50 Hz
" Bilder zum Vergleich"
72vu97sxa
6
Used machine in good condition. Available for immediate delivery.
- Screw diameter: 30 mm
- Injection pressure: 2.500 bar
- Injection volume: 113 cm³
- Screw speed: 295 rpm
- Ejector stroke / force max.: 150 / 125 mm / kN
- Clamping force: 800 kN
- Mould opening stroke max: 500 mm
- Mould height max: 500 mm
- Mould height max: 250 mm
- Daylight between platens max: 750 mm
- Platen size (h x v): 655 x 670 mm
- Distance between tie-bars (h x v): 420 x 420 mm
- Dimensions (long x wide x high): 4.10...
3
6 Monate Teilegarantie Generalueberholt
Boy 22 S Dip
Plastifiziereinheit 28
offene Duese
Auswerfer 80 mm
Ydp8utolb
Wasserverteiler 4 fach
220 KN
400v 50 Hz
" Bilder zum Vergleich"