Eszat Kft.

Condition: used, Control panel: Siemens SIMATIC PANEL, equipment: evaporator units, valves, process connections, fittings, valve, pressure control and measuring section, pressure gauges, pneumatic shut-off valves, solenoid valves, pressure regulators and additional components, an on-site inspection is possible. Bjdpfx Aoz Ibx Eel Aoln

Condition: good (used), functionality: fully functional, Valmet Sunds pulp dewatering press / bleaching press * Roll diameter: 900 mm * Roll length: 2820 mm * Roll speed: 2 - 15 revolutions/min * Roll gap: 3 - 13 mm Blodpfxoz Hc A Ao Al Aon

Year of construction: 2020, condition: used, Product: Sylysia 350, Gasil 23 D, Precarb 800, Calcilit, Benzophenone (partially lumpy), Lo-Vel 8100, Syloid 7000, bulk density: 0.08-0.73kg/l, particle size: powder, product temperature: 5-30°C, moisture: dry, consistency: free-flowing, non-sticky and non-agglomerated, system capacity: according to customer-provided container handling, operating mode: 3-shift operation, installation location: indoors/heated, ambient temperature: 5-30°C, power supply: 400V, 3Ph,N, 50Hz, control voltage: 24VDC, compressed air supply: 4-6bar, oil-free, max. surface temperature: 200°C, with documentation. An on-site inspection is possible, not connected to power. Bsdpfxjz D Hzqs Al Ajln

Condition: used, Large Industrial Plate Heat Exchanger – AISI 316 Stainless Steel Plates Heavy-duty industrial plate heat exchanger equipped with a large plate pack made of AISI 316 stainless steel. Product details: Equipment: Plate heat exchanger Plate material: AISI 316 stainless steel Large industrial plate pack Heavy-duty steel frame Flanged process connections Condition: Used industrial surplus Identification/marking: 316 The heat exchanger is dismantled and available from stock in Rotterdam, The Netherlands. Manufacturer, exact model, capacity and other technical specifications are currently unknown. Please refer to the pictures for the configuration and condition. This equipment is industrial surplus and is sold as-is, without warranty or claims. Bedez Di D Iepfx Al Aeln Please contact us for additional information or to make an offer.

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system Bodpfxez Ai Tpe Al Ajln - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Year of construction: 2012, condition: used, film width: 450 mm, roll width: 500 mm, machine/vehicle number: BA-18609, Equipment: CE marking, Coating Line Used for coating of battery electrodes - Roll width 500 mm - max. Web width 450 mm Bodpfx Aozzpqrsl Aoln - max. Coating width 400 mm - Web speed 0.1-5 m/min - Various substrate films such as copper, aluminium, PET and PES - Doctor blade & slot die coating - Web guide system - Corona pre-treatment - integrated x-Ray areal weight measurement - 1x infrared oven - 2x convection oven Length coater: 14 m The buyer is responsible for the proper disassembly and pickup of the machinery.

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: Q230213, For sale is an unused system for flameless explosion pressure relief, manufactured by REMBE. The device is in absolutely new condition, still packaged in its original wooden transport crate, and will be delivered including original documentation and accessories. Technical data (according to the nameplate): Manufacturer: REMBE GmbH Safety+Control Type: Q-Rohr-3-G-24 Nominal size: DN 600 / 24" Relief area: 2700 cm² Material: Stainless steel Seal: Graphite Burst pressure (at 22 °C): nominal 0.700 bar g (min. 0.595 / max. 0.805) Certification: ATEX (IBExU 16 ATEX 2029 X) Signal unit: ROSE Systemtechnik (Type 15.061003, max. temperature 200 °C) Scope of delivery: 1x REMBE Q-Rohr-3-G-24 (in original wooden crate) 1x Original operating manual 1x PHOENIX CONTACT isolation amplifier (MACX MCR-EX-SL-2NAM-T-SP, original packaging) The system is ideal for industrial and process plants that require the highest ATEX safety standards. An on-site inspection is possible by arrangement. Blsdezxgtfspfx Al Asn

Condition: used, Used Gericke type N450x800 MK2 nibbler. Unit has mild steel body with stainless steel 4-blade rotor, screen frame & screen. Unit direct driven with motor/gearbox. Has approximate throughput capacity of 30,000 l/h (product dependent). Bsdpfxozvybwj Al Aoln

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM Bsdpfxszvckne Al Asln • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Year of construction: 1993, condition: used, Two-stage plate heat exchanger. First stage - Heating: hot water / product Product inlet approx 61-62°C, outlet approx 72°C, flow rate 600 hl/h; Hot water inlet approx 72,5°C, flow rate 750 hl/h Second stage - Regeneration: product / product Product inlet approx. 0-4°C, product outlet approx. 61-62°C, flow rate 600 hl/h; Product inlet approx. 72°C, product outlet approx. 11-14°C, flow rate 600 hl/h Additional title: 2-stage heat exchanger Capacity: 600 hl/h Hot water: 750 hl/h Operating pressure: 21 bar Operating temperature: 100 °C Length: 2,15 m Width: 0,95 m Bledpoztzckofx Al Aon Height: 2,15 m Weight: 5000 kg Material: EPDM HT / NBR / 1.4439

Year of construction: 2006, condition: used, This plate heat exchanger from APV offers efficient and reliable heat transfer with a capacity of up to 240 hl/h in two stages. With a generous heat exchange area of 134 m² and a robust design for operating pressures up to 23 bar, this unit is well suited for demanding applications in breweries and the beverage industry. Thanks to its solid construction and compact design, it can be easily integrated into existing systems while ensuring high thermal performance and energy efficiency. An excellent and cost-effective solution for wort cooling, product heating, or other process applications. Our team at VBW Asset Trade will be happy to answer your questions. Capacity: 240 hl/h 2 stages Heat exchange area: 134 m² plate tracery min. 880 mm, max. 910 mm, actual 885 mm Bjdeztzbyepfx Al Asln Operating pressure: 23 bar Length: 2000 mm Width: 700 mm Height: 2000 mm

Year of construction: 1990, condition: used, Capacity: 250 hl/h Pressure: 16 bar Length: 3.000 mm Width: 750 mm Height: 2.246 mm Weight: 3150 kg Material: plates: 1.4404/0,8mm 196 WAP, 59 HHP, 3 AP / seals: Perbunan PRESS IN Base construction: clamping screw cap NIRO pedestal Bjdpfszty Hnex Al Asln Features: 4-stages (heater, hot holding section, regenerative heat exchanger, pressure reduction), connections: DN65

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Parker Nitromatic PSA Nitrogen Production Plant – 600 Nm³/h – 99.5% Purity Description A complete industrial plant for nitrogen production using PSA (Pressure Swing Adsorption) technology, designed for continuous 24-hour operation and the production of high-purity nitrogen for industrial applications. The system incorporates air compression, drying, filtration, nitrogen generation, and storage, supplying up to 600 Nm³/h of nitrogen at 99.5% purity in a fully automatic manner. Technical characteristics: • PSA (Pressure Swing Adsorption) technology • Manufacturer: Parker Nitromatic • Nominal capacity: 600 Nm³/h • Nitrogen purity: 99.5% • Maximum generation pressure: 7 bar(g) • Continuous 24-hour operation • Fully automatic operation • Integrated alarm system • Continuous oxygen analyzer with permanent purity reading • Ultra-dry nitrogen • 10,000-liter nitrogen storage tank Included equipment: Compressed air • 3 Atlas Copco GA90 VSD FF compressors • Power per compressor: 90 kW • Variable speed drive (VSD) • Integrated refrigeration dryer • 2,000-liter compressed air tank Air treatment • High-capacity filtration system • Parker MXS107 adsorption dryer • Air quality ISO 8573-1 Class 1.4.1 Nitrogen generation • 6 Parker NitroSource N2-80P generators • Total production: 600 Nm³/h • Integrated oxygen analyzer • Automatic PSA regeneration system Storage • 6 intermediate 1,000-liter tanks • 1 final 10,000-liter nitrogen tank Bljdpfx Alszm E Rfo Ajn

Year of construction: 2003, condition: good (used), functionality: fully functional, X-TEK RTR160UF: X-TEK Systems Ltd., England Model: RTR160UF Type: Ultra Focus X-Ray System Max. X-ray voltage: 160 kV Max. power: 60 W Focus size: 5 (Ultra Focus) Manipulator: 50 kg, 5 axes Power supply: 230 VAC, 50/60 Hz Serial number: RTR/124 Blodezl Screpfx Al Aen Model: RTR160UF X-ray source: 160 kV, 60 W, 5 m Ultra Focus Manipulator: 50 kg, 5-axis Serial No.: RTR/124 Supply: 230 VAC, 50/60 Hz Specified cabinet leakage: < 1.0 Sv/hr at any point on the cabinet surface under the stated test conditions. This is an industrial cabinet X-ray inspection system, designed for high-resolution non-destructive testing (NDT) of components, electronics, castings, solder joints, and similar items. The 5 m ultra-focus source is intended for very high-resolution imaging.

Condition: used, functionality: unexamined, Ultrasonic welding system, Ecoline 20L model Bledpfxjzlchls Al Aen - Ultrasonic generator K5 2000W/20kHz - Shipping available for an additional charge.

Year of construction: 2015, condition: new, Unused (NOS) Sulzer industrial agitator for tank mixing, with SCABA-S agitator head, stainless steel shaft, and SEW geared motor. The unit is from 2015 and is in new, unused condition. Manufacturer: Sulzer Pumps Sweden AB Type: SVVT-40 / 40SVV35T-M1 Year of manufacture: 2015 Condition: NOS (unused, stock item) Application: Tank agitator / Industrial agitator Agitator type: SCABA-S Motor power: 1.10 kW Process power consumption: 0.80 kW Mains frequency: 50 Hz Bledpfszlcfwsx Al Aon Motor speed (n1): 1,500 rpm Output speed (n2): 244 rpm Gearbox manufacturer: SEW-Eurodrive Gearbox type: KAF47 Gearbox design: Helical-bevel gearbox Gear ratio: i = 5.81 Motor adapter: 24FF165 Gearbox mounting position: M1 Flange: Special flange Flange diameter: 340 mm Bolt circle: 295 mm Mounting holes: 8 × Ø22 mm Shaft length: 500 mm Shaft design: Solid shaft Shaft material: Material 1.4462 (LDX Duplex stainless steel) Number of agitator elements: 1 Propeller type: 3SHP1 Propeller diameter: 475 mm Propeller material (hub): Material 1.4462 (LDX) Blade thickness: 4 mm Blade attachment: welded Direction of rotation: right (clockwise) Axial force: 244 N Torque: 43 Nm Bending moment: 74 Nm Minimum stiffness of tank mounting: 250,517 Nm/rad Tank medium (design): Vegetable oil Design temperature of medium: 65 °C Paint color: RAL 5017 Y-ring: present Flushing connection: no flushing

Condition: repair required (used), Compressor-Controlled Expansion Vessel Automation, Flamco Flexcon M-K 1600, Used machine Bljdpfx Aezkbcrol Asn Manufacturer: Flamco B.V. (Netherlands) – Premium manufacturer of HVAC and heating system technology Type / Series: Flexcon M-K 1600 (Compressor-controlled expansion automaton) System type: Diaphragm expansion vessel with control unit for heating and cooling systems Nominal capacity: 1600 liters Condition: Used, Compressor is missing from the vessel Overall dimensions: Technical and operating parameters: Maximum working pressure: 6.0 bar / 10.0 bar (depending on specific model variant, to be verified on nameplate) Maximum system temperature: 120 °C Maximum continuous diaphragm temperature: 70 °C Control / Supply voltage: 230 V / 50 Hz (or 400 V depending on the compressor block configuration) Protection class: IP 54 (Dust and splash-water protected control cabinet) Suitable Application Areas: The Flexcon M-K is a high-performance, compressor-controlled expansion unit specifically designed for pressure maintenance in sealed heating, solar, and cooling systems. Industrial and district heating systems: Precise, fluctuation-free pressure maintenance for large-scale heating networks and thermal stations. Office buildings and public facilities: Expansion volume compensation for central HVAC, cooling, and heating systems. Optimal degassing: The compressor-controlled operation minimizes system pressure drops, preventing bubble formation and reducing pipeline corrosion.

Year of construction: 2018, condition: used, Loma Systems IQ 3+E metal detection conveyor The conveyor drive motor must be connected separately. The machine was previously used in an inline configuration. Blodpfjzc N D Aox Al Aen Year of manufacture: 2018

Condition: excellent (used), functionality: fully functional, Used Maguire plastic drying units are for sale. This listing includes a total of 13 units, with the option to purchase individual units or a larger package. Available are Low Pressure Dryer and Vacuum Batch Dryer / vertical dryer models. Condition as shown in the photos. Price depends on the selected unit and quantity. These dryers are designed for drying plastic granules. The units are used, and their technical and visual condition corresponds to the photos. Additional photos of a specific dryer can be provided upon request. Available units: No. Designation Type / model as shown in the photos 1 D067 Maguire Low Pressure Dryer, model LPD2HE4 2 D049 Maguire Low Pressure Dryer, model LPD1HE4 3 D084 Maguire Low Pressure Dryer 4 D099 Maguire Low Pressure Dryer, model LPD1HE4 5 D054 Maguire Low Pressure Dryer, model LPD1HE4 6 D051 Maguire Low Pressure Dryer, model LPD1HE4 7 D065 Maguire Low Pressure Dryer, model LPD1HE4 8 D071 Maguire Low Pressure Dryer, model LPD1HE4 9 D068 Maguire Low Pressure Dryer, model LPD2HE4 Bledpfxezc D Ebo Al Aon 10 D076 Maguire Vacuum Batch Dryer, model VBD-150 11 D081 Maguire Vacuum Batch Dryer, model VB-150 12 D089 Maguire Vacuum Batch Dryer, model VB-150 13 D091 Maguire Vacuum Batch Dryer, model VB-150

Year of construction: 2022, condition: used, functionality: fully functional, Solid Fuel Steam Boiler and Accessories- 3 t/hour-8 Bar- Buhar Kazanı ve Ekipmanları Types of Solid Fuel : Coal and Pellet Blsdpfx Aoy R U T Tjl Asn Automatic Weighing System for Solid Fuel, Steam Temperature :172 ºC

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: 13030301, Equipment: type plate available, We are offering a combined spray painting and drying booth MAXI RANGE 15-NOVA VERTA, which enables both painting and drying operations. The booth is capable of independent operation along its full length or separately in each of its two halves, independently from each other. Bedpfxoy Iamts Al Aoln

Condition: used, Checkweigher Mettler Toledo IND560 Bsdpfx Aloyyynbj Ajln Scale manufacturer: Mettler Toledo IND560 Equipped with sensor and stop system for checkweighing purposes Machine has been tested for functionality

Condition: new, Zum Verkauf stehen 70 Stück Edelstahl Rückschlagventile. – Material: 1.4408 (AISI 316) – Nennweite: DN15 / 1/2" – Druckstufe: PN63 – Zustand: neu, unbenutzt (Lagerware) Die Ventile stammen aus industriellem Lagerbestand und wurden nie installiert. Geeignet für: – Chemische Industrie – Lebensmittelindustrie – Wasseraufbereitung – Prozessanlagen – Wartung und Ersatzteile Sehr interessanter Posten für Industrie und Handel. Verkauf einzeln oder als Komplettpaket möglich. Preis: 49 € pro Stück Mindestabnahme: 5 Stück Komplettpreis für 70 Stück: 2.800 € Standort: Slowakei (EU) Versand europaweit möglich For sale: 70 stainless steel check valves – Material: 1.4408 (AISI 316) – Size: DN15 / 1/2" – Pressure rating: PN63 – Condition: new, unused (warehouse stock) The valves originate from industrial stock and were never installed. Bledpfx Aoyxqq Dsl Aon Suitable for: – chemical industry – food processing – water treatment – process engineering – maintenance and spare parts Very attractive lot for industrial users or resellers. Available individually or as a complete lot. Price: 49 € per unit Minimum order: 5 units Full lot price (70 units): 2,800 € Location: Slovakia (EU) Worldwide shipping possible

Condition: used, Year of construction: 1991, machine/vehicle number: 40256654, pressure: 17 bar, power: 7,000 kW (9,517.34 HP), operating pressure: 17 bar, total height: 3,500 mm, total length: 9,000 mm, total width: 3,500 mm, type of input current: three-phase, Steam boiler in operation until 2025, 2 burners available: 1 burner for gas only and 1 dual-fuel burner that can switch between gas and fuel oil. Bedpfoyrcz Tox Al Aoln

Condition: ready for operation (used), Three identical base modules of the Rampf MC-EASY multifunction dispensing cell are available. Max. robot payload: 3kg, robot reach: approx. 600mm, manual component handling. Dispensing system for 1K and 2K materials, including gap filler and potting applications, material feed: from cartridges, hobbocks and 200l containers, dispensing control Beckhoff, material processing: cartridges, hobbocks, 200l containers, control: robot programming by Fruitcore with 3D real-time visualization of robot movement, with static 1K and 2K dispensing system. With automation module Digital Robot HORST600 and central operating software for all process participants, with 3x side panels and 1x door, comfort handle, profile half cylinder, base plate for the robot as well as consumables, operator console, light barrier, system light each individually positioned, mounted and wired, panels made of Makrolon. An on-site inspection is possible, not under power. Bodpfxjylzicj Al Asln