SPGroup a.s.

Condition: good (used), Year of construction: 2001, DMG / MAHO DMC 80 U – CNC Universal Machining Center Manufacturer: MAHO / DMG Model: DMC 80 U Machine Type: CNC Universal Machining Center Year of Construction: 2001 Machine/Factory Number: 71.408.395 Control System: MillPlus IT Operating Hours: approx. 90,896 h Spindle Operating Time: approx. 44,717 h Main Spindle Maximum Spindle Speed: 12,000 rpm Tool Draw-in Force Target: 22 kN Measured Tool Draw-in Force: 17 kN Spindle/Geometric Runout at L = 0 mm: 0.005 mm Spindle/Geometric Runout at L = 200 mm: 0.005 mm Tool Management Tool Magazine: 120 tool positions Automatic Tool Changer Tool gripper disassembled and cleaned as part of the last documented maintenance Pallet Automation 6 pallet positions Automated pallet handling system available Rotary/NC table available B and C axes available, according to the electrical maintenance report Axes / Drives Documented in the maintenance report of 2026 NC rotary table and axes Pallet changer / pallet handling Tool magazine / tool changing system Coolant and filter system Coolant system Chip conveyor Interlit compact filter Spindle oil cooler Smoke/mist extraction Ringler extractor During the documented maintenance, the following were carried out, among others: Coolant tank steamed and cleaned Chip conveyor cleaned Extraction system cleaned Tool gripper disassembled and cleaned Pressure accumulator checked and refilled with nitrogen to 80 bar Extractor cleaned Machine geometry checked Hydraulics / Lubrication Spindle cooling unit Hydraulic unit NC rotary table Oil changed during maintenance Central lubrication Performed by DECKEL MAHO Pfronten. The following were checked or serviced, among others: Electrical cables Control cabinet Hydraulic lines and hoses Compressed air system Check valves Axes Lighting Filters Machine function Emergency stop system Door locks Two-hand operation Machine geometry Electrical safety Check valves were renewed according to the maintenance report Electrical check very good according to DIN EN 60204 Insulation measurements – excerpt All documented measurement points were evaluated as OK. Main spindle motor: 192 MΩ X-axis: 255 MΩ Y-axis: 103 MΩ Z-axis: 427 MΩ B-axis: 279 MΩ C-axis: 108 MΩ Tool magazine: 267 MΩ Pallet changer drive: 113 MΩ Pallet changer linear drive: 90 MΩ Vertical stroke pallet changer: 1.12 GΩ Smoke extraction: 97 MΩ Chip conveyor: 1.42 GΩ Tool gripper: 1.66 GΩ Hydraulics: 2.21 GΩ Machine lamp: 447 MΩ Lubrication: 3.26 GΩ Protective conductor test Specification: < 0.3 Ω Measured values: Protective door machine: 0.16 Ω Protective door pallet changer: 0.26 Ω Control panel tool changer: 0.13 Ω Coolant system: 0.11 Ω Spindle cooler: 0.21 Ω Control panel work area: 0.03 Ω Spindle: 0.22 Ω Ringler extractor: 0.21 Ω All documented measurement points are within the specified target range. Equipment CNC control system MillPlus IT Universal machining B-axis C-axis / NC rotary table 12,000 rpm spindle 120-position tool magazine 6-position pallet system Automatic tool changer Automatic pallet handling Coolant system Interlit compact filter system Chip conveyor Lasdpfoz D Stfex Anxeg Spindle oil cooler Smoke/mist extraction Ringler extractor Hydraulic unit Central lubrication Comprehensive safety equipment Geometry test, runout value of 0.005 mm at a measuring length of 200 mm Tool draw-in force 17 kN, target value 22 kN

Condition: excellent (used), Year of construction: 2022, operating hours: 339 h, functionality: fully functional, machine/vehicle number: 22016009-T, tank capacity: 60 l, input voltage: 400 V, input frequency: 50 Hz, empty load weight: 470 kg, year of last overhaul: 2022, water tank capacity: 280 l, Equipment: rotational speed infinitely variable, ERBA Turbo 60 W Centrifugal Grinding System – only 339 operating hours, including cascade system and sieve vibrator For sale is our ERBA Turbo 60 W centrifugal grinding system for wet processing. The system was purchased in 2022 but has only been used sparingly since then. With only 339 operating hours, it is in very good used condition. The reason for the sale is that we need the space for newly acquired equipment. Technical data and features: - Container volume: 60 liters Lodpfx Anoz D Sr Iexjag - Turntable speed: continuously adjustable from 0 to 300 rpm - Motor power: 3.0 kW - Operating voltage: 400 V / 50 Hz - Work container and turntable with highly wear-resistant PU lining - Electric tilting device for the processing unit - Dosing pump for liquid process additives - Timer for setting the processing time - Frequency inverter for stepless speed control Accessories included in the offer: - ERBA cascade system: 280-liter tank with three chambers and a circulation pump for the circulation and reuse of the process water. - ERBA sieve vibrator YE 50: Separate sieve unit with a sieve area of 1,385 × 530 mm and a main sieve made of PE. With a discharge for grinding media in the direction of flow, a lateral discharge for small particles, and a frequency inverter for stepless adjustment of the motor speed. A little-used system with extensive equipment for wet lapping. If you are interested, we look forward to hearing from you.

Condition: good (used), electric motor, three-phase motor -Manufacturer: Wap, electric motor type AP 1112M-4 -Power: 4 kW Laodpfx Aez D Sruonxeg -Speed: 1440 rpm -Shaft: Ø 28 x 60 mm -Design: B3 -Protection class: IP 44 -Dimensions: 415/320/H225 mm -Weight: 51.8 kg

Condition: good (used), electric motor, three-phase motor -Manufacturer: Bauknecht, electric motor type RF 1.5/2-72 P Ljdpfsz D Srnsx Anxjag -Power: 3.0 kW -Speed: 2860 rpm -Shaft: Ø 19 x 40 mm -Design: B3/B5 -Protection rating: IP44 -Dimensions: 350/200/H2308 mm -Weight: 19.9 kg

Condition: used, functionality: fully functional, JOSTING QFS 1300 veneer cutting guillotine Ljdpez D Srbsfx Anxeag Cutting width: 1300 mm Cutting height: 80 mm

Condition: new, pressure: 250 bar, input voltage: 400 V, overall weight: 79 kg, The GT 15/250 is a professional high-pressure washer designed for prolonged, intensive use in demanding environments. Combining high operating pressure, high water flow, and robust industrial construction, it is ideally suited for car washes, workshops, industrial plants, detailing businesses, agriculture, and the construction sector. The pump housings are made of anodized aluminum, ensuring resistance to corrosion and mechanical damage. Internal components, such as ceramic plungers, offer low friction and a long service life. The brass pump head is resistant to high pressure and temperatures, while the stainless steel suction and discharge valves withstand wear and contaminants. Equipped with a pressure regulation valve and a thermal safety valve, the brass pump ensures the unit's durability even under heavy loads. Key advantages of the TECHKAR GT 15/250 pressure washer: · Very high pressure of 250 bar (3600 PSI) – effective removal of even the most stubborn dirt · High water flow rate of 15.5 l/min (4.1 GPM) – faster and more thorough cleaning of large surfaces · Powerful 7.5 kW three-phase motor – designed for continuous operation · Power supply: 400V / 50Hz / 4P – stable and safe operation for professional use · Water pre-filter – pump protection and extended equipment service life · Automatic START/STOP system – energy savings and reduced component wear · Chemical injector – allows for the application of aggressive cleaning agents Advanced safety systems and operational comfort: The TECHKAR GT 15/250 pressure washer is equipped with an ON/OFF switch ensuring safe and reliable operation: Laodpfjz D Sqwex Anxjg · Overheat protection · Leakage current protection · Automatic START/STOP function · Total stop function · Robust industrial design · Powder-coated frame – resistant to mechanical damage and corrosion · 10-inch motor housing – additional protection for key components · Sturdy pneumatic wheels – easy maneuvering even on uneven terrain · Weight: 79 kg – operational stability and high durability Standard equipment for the TECHKAR GT 15/250: · High-pressure gun with lance and quick-connect fittings · 5 types of nozzles with varying spray angles and fittings ·quick-connect coupling ·reinforced 10m high-pressure hose with quick-connect fittings ·pressure gauge ·pressure control valve for adjusting settings to the specific task ·water filter ·chemical injector + suction hose ·gun/lance holder ·manual Technical specifications ·Working pressure: 250 bar | 3600 PSI ·Water flow rate: 15.5 l/min | 4.1 GPM ·Motor power: 7.5 kW ·Power supply: 400 V / 50 Hz / 4P ·Weight: 79 kg Applications of the TECHKAR GT 15/250 high-pressure washer The washer is ideal for use in: ·professional car washes ·industrial and manufacturing plants ·heavy machinery and vehicle service centers ·detailing companies ·agriculture and construction ·cleaning machinery, steel structures, floors, and facades

Condition: like new (used), Available for sale: a stock of 42 unused LANGQIN solid tyres for heavy-duty telehandlers. Specifications Manufacturer: LANGQIN SANY part number: 60026737 Tyre size: 14.00-24 Lsdpfoz D Sqksx Anxoag Load/speed marking: 196A3 Tread/specification: L-3S Construction: solid tyre with cushioning apertures Dimensions: approximately 1,332 × 1,332 × 352 mm Quantity available: 42 pieces Condition: unused, with possible dust and storage marks Purchased in: 2024 Production date: unknown Application: off-highway use only The majority of the tyres are supplied as loose tyres without rims. A limited number are mounted on steel rims. The exact distribution and technical specifications of the available rims must be confirmed during inspection. The 14.00-24-196A3-L-3S specification is used on selected heavy-duty SANY telehandlers, including the STH1056A and STH1256A. Before purchasing, the buyer must verify compatibility with the relevant machine, rim and configuration by checking the SANY part number. The tyres have a directional tread pattern. The indicated direction of rotation must be observed during installation. The tyres can be supplied in smaller quantities or as one complete lot of 42 pieces. Inspection and reservation This description is based on the visible markings, available stock information and photographs. All information, including quantity, condition, dimensions, weight, rim configuration and technical compatibility, is subject to inspection and final verification. Inspection prior to purchase is available and expressly recommended. The tyres are sold in their present condition. No guarantee can be given regarding the production date, exact weight or suitability for a particular application without further verification.

Condition: good (used), electric motor, three-phase motor -Manufacturer: Wap, electric motor type AP 100L-4 -Power: 3.7 kW -Speed: 1440 rpm -Shaft: Ø 28 x 60 mm -Design: B3 -Protection class: IP 45 Lodpsz D Sp Tefx Anxjag -Dimensions: 385/198/H240 mm -Weight: 32.1 kg

Condition: ready for operation (used), Year of construction: 1992, TOS Varnsdorf Laedpfsz D Sptex Anxog WHN 13 Year of manufacture: 1992 Travel ranges: 2100 x 1900 x 1200 mm Table load capacity: approx. 18 tons Heidenhain 310 TNC control system 37 kW

Condition: refurbished (used), Year of construction: 2012, operating hours: 19,376 h, functionality: fully functional, machine/vehicle number: 57755, RÖSLER Vibratory Finishing Machine / Rotary Vibrator – fully functional – newly coated – in very good condition For sale is a high-quality vibratory finishing/rotary vibrating system from the renowned manufacturer RÖSLER. The machine is in very good technical and optical condition, is fully functional, and can, of course, be inspected on-site after prior arrangement. Price: €14,500 net A particular advantage of this machine is the condition of the processing bowl: the machine was newly coated directly by the manufacturer RÖSLER. The coating is therefore in very good condition. The machine has been carefully maintained and overall gives a very well-kept impression. Depending on the abrasive media and process used, the system is suitable for deburring, rounding, smoothing, cleaning, and surface finishing of workpieces. Thanks to its robust industrial design, it is designed for professional use in production, metalworking, and surface treatment. The machine is offered including control cabinet/control system and the components shown in the pictures. The control system, drive, and mechanical components are functioning perfectly. The machine is ready for use and fully functional. Condition & Features: * Manufacturer: RÖSLER * Industrial vibratory finishing/rotary vibrating system * Fully functional * Processing bowl newly coated by the manufacturer RÖSLER * Very good technical condition * Well-maintained overall optical condition * Robust industrial design * Including control cabinet/control system * Separation/screening zone and discharge chute available * The machine is currently secured for transport on a pallet Ledpfxez D Sn Ns Anxeag * On-site inspection possible by appointment * Selling price: €14,500 net plus statutory VAT.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 02/2022, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2022, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation. 2 temperature sensors for CargoWatch FP double leaf insulated rear door, NX17 foam, w. double stainl. steel lock. mech. Plastic toolbox with cover holder, sleeves and drawer behind the unit. SCHMITZ black plastic fuel tank 245l 1 filling neck; BIO-Diesel proofing. Tyres 385/65 R22.5. Overall length - 13550mm. Overall trailer width - 2600mm. Total height (unladen) - 4000mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes). Lajdpfxjz D Snps Anxeg Tyres Information Front left - 10 mm Front right - 10 mm Middle left - 13 mm Middle right - 13 mm Rear left - 10 mm Rear right - 10 mm

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 020020, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, suction capacity: 4,500 m³/h, total height: 2,000 mm, total length: 2,000 mm, total width: 1,000 mm, overall weight: 280 kg, For sale is a fully functional industrial dust extraction unit from HOLZING / MÜNALSAN, model RLA 125 VIBER. The unit is used, in good technical condition, and fully operational. It is ready for further use. The dust extraction unit is designed for industrial applications, including the extraction of dust, wood chips, and other contaminants generated during material processing. Technical data: Manufacturer: KMA Maszyny / MÜNALSAN Type: RLA 125 VIBER Laodpfx Anjz D Sm Ejxog Year of manufacture: 2020 Serial number: 020020 Motor power: 3 kW Power supply: 400 V Frequency: 50 Hz Maximum capacity: approx. 4500 m³/h Unit weight: approx. 280 kg Solid, metal construction Installation with pipes and fittings as shown in the photos The unit has been inspected and is functioning correctly. The visual condition is as shown in the photos – normal signs of use, dirt, and wear are visible, but they do not affect the operation. We are selling the exact unit shown in the photos. It is possible to inspect the unit on-site before purchase. The stated price is indicative and does not constitute a binding offer. The final selling price will be determined individually after inspection and verification of the unit's technical condition. Due to its size and weight, personal collection is preferred. Transportation is also possible after prior arrangement.

Condition: used, Year of construction: 1996, Table 1250 x 800 mm X/Y/Z - 1000/800/500 mm Spindle speeds 15.000 rpm Spindle taper SK 40 No. of stations in tool changer 24 Control: Grundig dialog 112 Laedpfx Anez D Smlsxsg Equipped with: 12 tool holders 1 vice

Condition: good (used), simple coolant system with approximately 80-liter capacity Ledpfez D Smfox Anxoag

Condition: used, empty load weight: 6,623 kg, maximum load weight: 32,377 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 08/2018, next inspection (TÜV): 09/2027, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, loading space volume: 101 m³, total length: 13,620 mm, suspension: air, tire size: 445/45 19,5, color: yellow, Year of construction: 2018, front tire size: 445/45 19,5, rear tire size: 445/45 19,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 41585 Schmitz, SCB S3T * Year of manufacture: 2018 * ABS, Anti-lock Braking System * EBS, electronic brake system * Air suspension * Tarpaulin, neutral * Used tarpaulin * Edscha / Sliding roof cover * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Decorative lashing holes in the outer frame (Multilock outer frame) * Retractable lashing eyes * Pallet stop rail * Mechanical lifting roof * DCE 9.5 Daimler Chrysler certificate * Portal door * Aluminum boards * Air connection, coupling head (red + yellow) * Connecting plug, 2 x 7-pin * Connecting plug, 15-pin * Lifting and lowering device * Ferry lashings * Storage box / toolbox * Galvanized * Inspections: MOT / emissions test valid until 09.2027 * Suspension: Air * Gross vehicle weight: 39,000 kg * Tare weight: 6,623 kg * Payload: 32,377 kg * Permissible gross vehicle weight: 39,000 kg * Axle manufacturer: Schmitz Rotos% * Tire condition, 1st axle: -- - Tire size: 445/45 R19.5 * Tire condition, 2nd axle: -- - Tire size: 445/45 R19.5 * Tire condition, 3rd axle: -- - Tire size: 445/45 R19.5 * Tire sizes: 445/45 R19.5 * Internal dimensions: L=13,620 mm, W=2,480 mm, H=3,000 mm * Internal volume*: 101 m³ * Pallet spaces: 34 * Aluminum plank tarpaulin Ledpez D Sl Uefx Anxoag * Second ride height, Varios * 28mm floor, 7,100 kg forklift axle load * Upon request, we can send you a video * Construction description and more images Disclaimer: Subject to changes, prior sale, and errors. More images and videos can be found on our website. Our extensive service includes, for example: * Purchase / Sale / Rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, mileage: 685,421 km, power: 345 kW (469.07 HP), first registration: 07/2021, fuel type: gas, empty load weight: 8,142 kg, maximum load weight: 9,858 kg, overall weight: 18,000 kg, tire size: 315/70 22,5, tire condition: 50 %, axle configuration: 4x2, next inspection (TÜV): 05/2026, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2021, operating hours: 685,421 h, front tire size: 315/70 22,5, rear tire size: 315/70 22,5, Equipment: ABS, cruise control, navigation system, parking heater, truck registration, Vehicle number for inquiries: 2311 Volvo, FH 460 * Year of manufacture: 2021 * ABS, Anti-lock Braking System * EBS, electronic braking system * Refrigerator unit * Leather interior * Air suspension * Navigation system * Auxiliary heater * Stand-alone air conditioning * Cruise control * Low noise * Long-haul > 7.5 tons * Distance Assist * Lane Keeping Assist * Electric windows + mirrors * 2 bunks * Inspections: MOT / Emissions Test 05.2026 * Transmission: Automatic * Suspension: Leaf / Air * Gross vehicle weight: 18,000 kg * Unladen weight: 8,142 kg * Payload: 9,858 kg * Permissible total weight: 18,000 kg * Tire condition, 1st axle: 50% - 50% - Tire size: 315/70 R22.5 * Tire condition, 2nd axle: 50% - 50% - Tire size: 315/70 R22.5 * Tire sizes: 315/70 R22.5 Disclaimer: Subject to changes, prior sale, and errors. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase / Sale / Rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. Laedpfx Aez D Sl Ijnxjg * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, mileage: 845,210 km, power: 345 kW (469.07 HP), first registration: 06/2021, fuel type: gas, empty load weight: 8,142 kg, maximum load weight: 9,858 kg, overall weight: 18,000 kg, tire size: 315/70 22,5, tire condition: 50 %, axle configuration: 4x2, next inspection (TÜV): 11/2024, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2021, operating hours: 845,210 h, front tire size: 315/70 22,5, rear tire size: 315/70 22,5, Equipment: ABS, cruise control, navigation system, parking heater, truck registration, Vehicle number for inquiries: 2310 Volvo, FH 460 * Year of manufacture: 2021 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Refrigerator compartment * Leather interior * Air suspension * Navigation system * Auxiliary heater * Stationary air conditioning * Cruise control * Low noise Ljdpfxsz D Slze Anxoag * Long-distance transport > 7.5 tons * Distance assist * Lane keeping assist * Electric windows and mirrors * 2 berths * Inspections: MOT / Emissions test valid until 11.2024 * Transmission type: Automatic * Suspension: Leaf / Air * Gross vehicle weight: 18,000 kg * Unladen weight: 8,142 kg * Payload: 9,858 kg * Permissible gross vehicle weight: 18,000 kg * Tire condition, 1st axle: 50% - 50% - Tire size: 315/70 R22.5 * Tire condition, 2nd axle: 50% - 50% - Tire size: 315/70 R22.5 * Tire sizes: 315/70 R22.5 Disclaimer: Subject to changes, prior sale, and errors. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering of export license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * Technical inspections (TüV), registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to assist you.

Condition: used, Year of construction: 2007, functionality: limited functionality, saw blade diameter: 370 mm, total length: 810 mm, total height: 1,850 mm, total width: 1,020 mm, overall weight: 390 kg, saw blade speed: 15 rpm, working height: 925 mm, For sale is a professional vertical circular saw, IMET Sirio 370. Ideal for daily use in workshops and metalworking shops. Important note regarding the condition: The saw runs and cuts perfectly at the first speed setting (15 RPM). The second speed setting is currently not functioning (presumably a problem with the switch or motor). Laodpfoz D Slnox Anxog A used saw blade and a new saw blade are included.

Condition: good (used), Year of construction: 1994, large shredder, ideal for pallets or waste wood rotor width 1200 mm motor 30 kW Lasdjz D Sk Repfx Anxog with hydraulic pusher

Condition: new, Frozen meat block guillotine – NEW MACHINE 2 pcs knives for transverse cutting 5 pcs knives for longitudinal cutting Maximum cutting width: 460 mm Maximum cutting height: 300 mm Capacity: up to 1800 kg/h Temperature of frozen meat block: up to -20° C Control panel Hydraulic lifting device Lasdpfxjz D Skqj Anxsg Machine dimensions in cm: Width: 90.0 Length: 160.0 Height: 185.0 Installed power: 5.0 kW Voltage: 380 V, 50 Hz

Condition: good (used), Year of construction: 1998, Ref. -No.: 10664 Manufacturer: HEDELIUS Type: BC 100 Performance Year of construction: 1998 Type of control: CNC Control: Heidenhain 426 Storage location: Halberstadt Country of origin: Germany Lodpez D Skdefx Anxoag X-Travel: 3500 / 2 x 1450 mm Y-Travel: 1000 mm Z-Travel: 700 mm Tool Taper: SK50 DIN 69871 Numbers Of Tools In Magazin: 30 Turning Speeds: 20 - 5000 RPM Rapid Travel X/Y/Z: 30 mm / min Spindle power: 50 kW Minimum distance between spindle nose and table top: 190 mm Further information: - NC software version: 28047629 - PLC: bc80_426_3:07 - Setup 286197 37 The machine can be viewed while powered on by appointment.

Condition: used, mileage: 88,578 km, power: 88 kW (119.65 HP), first registration: 12/2019, fuel type: diesel, next inspection (TÜV): 01/2028, fuel: diesel, color: blue, emission class: euro6d-temp, Year of construction: 2019, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, sliding door, traction control, truck registration, ,, * More 1500 vehicles can be found on our homepage, leasing and financing also possible without down payment!\*Our prices are cash collection prices, i.e. additional work such as retrofitting a tow bar, second set of tires, customer service, warranty, carefree packages, etc., will be charged additionally.\*Despite the greatest care, advertising errors cannot be excluded and are therefore without guarantee! Input errors, prior sale and errors excepted. Equipment and consumption details are based on the VIN data query via the DAT SilverDAT system. The VIN details are not part of the purchase contract.\*Our new cars: Due to various manufacturer specifications, it is possible that these have already received a daily and short-term registration or will receive one before sale. ... Subject to changes, prior sale and errors excepted Lasdpfxjz D Sa Ej Anxsg

Condition: used, Year of construction: 2016, fuel type: diesel, Lifting capacity: 450 kg Please contact Gebrauchtgeräte Center for more information Lajdoz D R T Rspfx Anxsg

Condition: used, Year of construction: 2014, fuel type: electric, Lifting capacity: 200 kg Laodpfxjz D R T De Anxeg Please contact Gebrauchtgeräte Center for more information

Condition: used, Year of construction: 2016, fuel type: diesel, Lifting capacity: 680 kg Lsdpfsz D R Twsx Anxeag Please contact Gebrauchtgeräte Center for more information