Frexboc Slu

Condition: used, Year of construction: 2015, control Haidenhein serial number 10981203183 Axis 5 Ljdpfszpbl Rjx Aifsrp ja x-travel 1.250 mm y-axis 1250 mm z-travel 1000 mm workpiece diameter: 1250 mm Ja not simultaneously

Condition: used, Year of construction: 2004, CNC lathe Gildemeister Type/Model CTX 520 linear Condition: Used Year of manufacture: 2004 Operating hours: 86,490 Spindle hours: 12,970 Technical data Working area max. turning diameter: 680 mm Turning diameter over X-axis: 565 mm Chuck diameter: 250/315 mm Spindle bore: 107 mm Spindle speed C-axis (main spindle): 400 rpm Travel in X-axis: 315 mm Travel in Z-axis: 1350 mm Number of tools: 12 Power max. 100% duty cycle: 4.9 kW Torque 100% duty cycle: 10.5 kW Speed range: 4500 rpm Tailstock Lsdpfozn Ih Nox Aiferp Tailstock travel: 1200 mm Tailstock force: 14 kN Taper: 5 MK Quill travel: 120 mm Coolant system Capacity: 250 l Pump output: 1.7 kW Flow rate at 6 bar: 20 l/min Connected load: 65 kVA / 100 A Operating voltage: 400 V Dimensions and weight Weight approx. 10 t + 0.65 t Dimensions approx. 6000 x 3050 x 2270 Equipment: - Chip conveyor without pump - Machine feet Inquiry item: Transportation costs will be provided in a separate quote.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, * Mori Seiki NL 2500 SY. * Year 2009. * Y-axis. * C-axis. * 5-axis machine. * 1.5-meter Lns Quick Load bar loader. Lredjzn H T Djpfx Aifep * Sub-spindle. * 12-station turret, all stations motorized. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. * Integrated sub-spindle motor: 15 kW. * Direct-drive motor for powered tools: 5.5 kW. * Motor starting torque: 640 N·m. * Motors without belts or gear stages. * Main spindle size: A2-8. * Sub-spindle size: A2-6. * Bar capacity: 80 mm. * 250 mm Kitagawa B-210 main spindle chuck with metric system. * 210 mm Kitagawa B-208 sub-spindle chuck with metric system. * Prismatic guides on all axes. * Main spindle speed: 4,000 rpm. * Motorized tool speed: 6,000 rpm. * Daikin oil cooler for both spindles. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitor. * Rapid traverse speed: 30 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Installation interface for bar loader. * Automatic workpiece collector. * Dual pedal for independent opening and closing of the main spindle and sub-spindle. * Side-mounted hinged chip extractor. * Extensive range of static and motorized tool holders. * Electrical transformer. * Documentation, parts list, electrical schematics, programming, and operating manual. * Weight: 5,800 kg. * Machine is currently in operation. * It is essential to check the precision videos. * Immediate delivery, unless sold immediately.

Condition: like new (used), functionality: fully functional, * Mori Seiki ZT 1500 YB. * Opposed-spindle machine. * Spindle size A2-6, twin spindles. * 2 stacked turrets. Lsdpfxezn H Tko Aifsrp * 9-axis controlled turning and milling center. * 2 turrets. * Y-axis upper turret. * 2 C-axes. * Bar capacity: 65 mm. * Two integrated 15 kW motors. * Tool life management and tool wear monitoring. * Two Renishaw automatic tool measurement arms. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitoring. * Oil cooler for both spindles. * 340 Nm cutting torque. * 15-position turret, all positions motorized. * Automatic workpiece collector. * 1.5-meter bar feeder. * Interface for bar feeder installation. * Rear automatic part pick-up with special gripper for long parts. * Max. turning diameter: 320 mm. * Turning length: 810 mm. * Mori Seiki MSX-701 III control. * Max. distance between main spindle and counter spindle: 920 mm. * Main spindle speed: 5000 rpm. * Counter spindle speed: 5000 rpm. * X1 travel: 210 mm. * Y1 travel: +50 / -50 mm. * X2 travel: 210 mm. * Counter-spindle travel: 920 mm. * Number of powered tool stations: 2 x 15. * Capable of holding 30 tools per turret. * Large selection of external and internal tool holders. * Large selection of axial and radial motorized blocks. * Approximate value of equipment: 18,000 euros. * Speed range of powered tools: 5,000 rpm. * Drive motor for powered tools: 5.5 kW. * Rapid traverse X1, X2: 25,000 mm/min. * Rapid traverse Y1: 20,000 mm/min. * Rapid traverse Z1, Z2: 30,000 mm/min. * C-axis resolution: 0.001°. * High-precision Hainbuch collet chucks on both spindles. * External and internal tool holders. * Motorized axial and radial blocks. * Communication ports via USB, PCMCIA card, and RS-232. * Rear chip conveyor. * Power transformer, documentation, parts list, electrical schematics, programming, and operating manual. * Machine in very good condition. * Machine weight 6.5 tons. * Machine available for inspection while in operation. * Immediate delivery, unless sold prior to listing.

Condition: defective spare-parts repository (used), Year of construction: 2003, machine/vehicle number: 07400001041, Sales location: Landgrafenstraße 45, 41069 Mönchengladbach TWIN 102 Year of manufacture: 2003 Siemens 840 D Powerline Main spindle 33 KW, 3200 1/min Counter spindle 21 KW Travel distances: Saddle 1 X-axis 300 mm Y-axis 80 mm Z-axis 600 mm Lredpfx Aszn H D Asifsp Turret, 12 positions, VDI 30, 12 driven Saddle 2 X-axis 180 mm Z-axis 650 mm Turret, 12 positions, VDI 30, 12 driven Saddle 3 X-axis 175 mm Z-axis 670 mm Tailstock Known faults: Z3-axis defective

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 04780000161, Sales location: Landgrafenstraße 45, 41069 Mönchengladbach Machine: Twin 500 Machine number: 04780000161 Year of manufacture: 2001 Siemens 840 D Main spindle: 45 kW, 3200 rpm, swing: 610 mm, spindle distance: 1850 mm Counter spindle: 45 kW, 320 rpm Travel ranges: Saddle 1 X-axis: 605 mm Y-axis: 210 mm B-axis: 240° Z-axis: 1470 mm Turning/milling spindle: 10 kW, HSK 63, 12000 rpm Saddle 2 X-axis: 267 mm Z-axis: 1440 mm Turret Lrsdpfjzn H Dvsx Aifsp Saddle 3 Z-axis: 1460 mm Tool magazine: 80 positions

Condition: excellent (used), Year of construction: 2019, operating hours: 2,100 h, functionality: fully functional, turning length: 3,028 mm, turning diameter over cross slide: 690 mm, turning diameter: 650 mm, spindle bore: 166 mm, DOOSAN PUMA 5100 XLMB CNC LATHE FANUC CONTROL 32i B YEAR 11/2019 , INSTALLED 2020 SWING OVER BED 900 MM SWING OVER SADDLE 690 MM Lrjdpfx Aieznu Dqsfjp MAX TURNING LENGTH 3028 MAX TURNING DIA 650 MM HYD CHUCK 550 MM DIA X 362 Z 3150 C 360 INDEXING 0.001 12 STATION TURRET BORING BAR 60 MM MAX RPM 1500 BAR CAPPACITY 166.37 MM TAILSTOCK - QUILL 120 DIA - NO 6 MT LIVE TOOLING SWARF CONVEYOR TOOL PRESETTER COOLANT SYSTEM HYD STEADY IS THERE BUT NOT FITTED TO MACHINE FULL LOAD 82 AMPS NETT WEIGHT 13.2 TON

Condition: used, Year of construction: 2012, turning diameter 370 mm turning length 424 mm control MSX-711-IV Mori Seiki swing diameter 370 mm X1- Axis 380 mm X2- Axis 155 mm Z1- Axis 460+155 mm Z2- Axis 610 mm y-axis +/- 105 mm B - axis +/- 120 ° bar material dia. 65 mm speed spindle max. S1 5.000 / S2 6.000 U/min. spindle bore S1/S2 65/38 mm 12000 1/min tool taper Capto C5 toolpiece magazine: chain magazine 76 Stück total power requirement 45 kW weight of the machine ca. 10,5 t dimensions of the machine ca. 2,71 x 2,43 x 2,40 m MAPPS control system Renishaw HPRA (manual tool presetter) Blum Laser Control Lrsdsznnc Hopfx Aifep Direct measuring system X;Y;Z;B Collet chuck SMW Autoblok KSZ-MB-040-Z140 Workpiece conveyor belt Bar feeder Breuning Irco ILS-RBK-10012 Knoll band filter KF10/500 / IKZ with milling spindle 7 stages up to 70 bar Chip conveyor ConSep 2000

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Lrsdpfjznmbusx Aifjp

Condition: good (used), Year of construction: 2005, The machine is in good working condition; testing is possible upon prior arrangement. SPACESAVER SS 2101. Fanuc MSX-850 control system. Lrjdpfsznl Nqjx Aifep

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 300 mm, travel distance Z-axis: 1,400 mm, total height: 2,400 mm, total width: 2,560 mm, overall weight: 13,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK, product length (max.): 5,460 mm, number of axes: 8, This 8-axis Index G250 turn-mill centre was manufactured in 2004. It includes a Knoll chip conveyor, EMAG cooling unit, and ISI mist extraction system. The machine features a hydraulic power chuck with a clamping range of 125–152 mm and an overhead gantry loader for automation. If you are looking to get high-quality turning and milling capabilities, consider the Index G250 machine we have for sale. Contact us for further details. Lredpfoznc Nbsx Aifop - Control Unit: Siemens SINUMERIK / INDEX C 200-4D- Rated Voltage: 400 V AC (3 Phase, 50 Hz)- Rated Current: 74 A- Rated Power: 43 kW- Control Voltage: 24 V DC- Tool Turret: 12-station tool turret with driven/live tool capability (individual powered tools are not included in the scope of delivery)- Workholding: Main spindle with hydraulic power chuck / collet system, SMW-Autoblok SLU-3-ZS hydraulic power chuck (clamping range 125-152 mm)- Steady Rest: SMW-AUTOBLOK / Original SMW Steady Rest (Type: SLU-3-28, Clamping range: 12-152 mm, Max. operating pressure: 60 bar)- SMW Autoblok steady rest: • hydraulic/self-centering steady rest • mounted on its own lower slide • suitable for providing additional support for long or thin workpieces- Tailstock unit with a rotating center on the right side of the work area for supporting longer workpieces- Hydraulic System: Integrated hydraulic power unit operating at 95 bar pressure- Automation / Gantry Loader: Promet Automation gantry loading system overhead- Coolant / Chip System: Knoll chip conveyor / coolant unit (YOM: 2004)- Chiller Unit: EMAG Chiller / Cooling Unit (YOM: 2016, Cooling capacity: 9.5 kW, Refrigerant: 2.5 kg)- Mist Collector / Air Cleaner: ELBARON / ISI RON / A 2500 Electrostatic Air Cleaner / Mist Extractor (YOM: 2004)- Documentation Included: Complete documentations, operating manuals, etc.- Transport Dimensions (L x W x H): Approx. 5460 x 2560 x 2400 mm (width reducible to 2450 mm)- Machine Weight: Approx. 13,500 kg Technical Specification Counter Spindle No Driven Tools No

Condition: good (used), FANUC 31i-B control system C-axis on both spindles Milling drive on the upper turret Milling drive on the lower turret B-axis on the upper turret: +/- 91° Y-axis on the upper turret: +/- 40 mm Y-axis on the lower turret: +/- 32.5 mm Larger main spindle: A5 Bar diameter: 51 mm Larger counter spindle: A5 Bar diameter: 51 mm Polygon turning function Unloading with gripper hand on the upper turret Intelligent handwheel Lsdpezncrcefx Aifjrp AME inclined bed filter system 10-70 bar

Condition: good (used), Year of construction: 2004, turning length: 1,345 mm, turning diameter: 420 mm, spindle speed (min.): 3,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,280 mm, Manufacturer: Mori Seiki Co., Ltd. (Nagoya, Japan) + chuck system Machine model: NL3000MC/1250 Serial number: NL301DJ0070 Year of manufacture: October 2004 Machine weight: 7600 kg Electrical data Lodjzm Tkaepfx Aiforp Voltage: AC 200 V Phases: 3 Frequency: 50 Hz Rated power: 44 kVA Full load current: 127 A Spindle motor current: 200 A Interrupting capacity: 5 kA Electrical diagram number: NL301DJ0070 The machine is a CNC turning center (Mori Seiki NL series) with a nominal electrical power of 44 kVA. CHUCK SYSTEM: Manufacturer: Kitagawa Chuck: B-212A821F Chuck cylinder: S2091 Technical data Permissible pressure (when using external chuck jaws on the standard package): 2.7 MPa Maximum speed: 3000 min⁻¹ CNC turning center of the NL series (Mill Center version) with milling capability (driven tools + C-axis). The data is compiled from original Mori Seiki / DMG MORI catalogs and matches your machine's nameplate (year 2004, weight 7600 kg, 44 kVA, 200 V). Capacity ValueMax. turning diameter420 mmMax. turning length1250–1345 mm Swing over bed995 mm Swing over carriage825 mm Bar capacity90 mm (3.5") Standard chuck12" (Kitagawa B-212A821F) Travels X-axis: 260–280 mm Z-axis: approximately 1280–1370 mm (depending on the exact configuration /1250) Y-axis: option (usually ±60 mm for Y/SY versions) Spindle Max. speed: up to 4000–6000 min⁻¹ (limited to 3000 min⁻¹ with your Kitagawa chuck) Spindle bore diameter: 105 mm (approximately 91 mm with chuck) Spindle mounting: A2-8 Spindle motor power: 22/18.5 kW (30/25 HP) or up to 30 kW (depending on the version) Minimum indexing angle: 0.001° Turret (MC version) Number of stations: 10 or 12 Rotary tools: yes (max. 6000 min⁻¹) Power of rotary tool drive: 5.5 / 5.5 / 3.7 kW Indexing time: approximately 0.2–0.3 s Rapid traverses and drives Rapid traverse X/Z: up to 30 m/min Rapid traverse Y: up to 10 m/min (if equipped) C-axis: up to 300–400 min⁻¹ Electrical and other data (from your nameplate) Rated power: 44 kVA Voltage: 200 V AC, 3-phase, 50 Hz Full load current: 127 A Machine weight: 7600 kg Controller: typically MSX-850 / MAPPS

Condition: used, Year of construction: 2018, operating hours: 28,500 h, functionality: fully functional, machine/vehicle number: AT0980, turning length: 650 mm, turning diameter over cross slide: 400 mm, turning diameter: 400 mm, spindle motor power: 21 W, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 275 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 700 mm, mount diameter: 250 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, feed length X-axis: 275 mm, feed length Y-axis: 90 mm, feed length Z-axis: 700 mm, torque: 258 Nm, bar passage: 65 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 24 m/min, total height: 2,500 mm, total length: 2,800 mm, chuck outer diameter: 250 mm, total width: 1,600 mm, bar diameter (max.): 65 mm, spindle nose: A8/DIN, swing diameter over bed slide: 600 mm, overall weight: 6,000 kg, swing diameter over top slide: 400 mm, spindle diameter: 65 mm, turning diameter over bed slide: 400 mm, Equipment: documentation/manual, CNC Turning Center SPINNER TC600 65SMCY with Bar Feeder SPINNER TC600 65SMCY CNC turning center, manufactured in 2018, equipped with a Siemens SINUMERIK 840D sl control. The machine is suitable for complex turning operations and serial production. It is equipped with a Y-axis, sub-spindle, driven tools, chip conveyor, and parts catcher. Machine details • Manufacturer: SPINNER • Model: TC600 65SMCY • Year of manufacture: 2018 • Serial number: AT0980 • Control: Siemens SINUMERIK 840D sl • Power supply: 400 V, 50/60 Hz • Maximum swing diameter: approx. 600 mm • Maximum turning diameter: approx. 400 mm Lodpjzm Rrzsfx Aiferp • Maximum turning length: approx. 650 mm • Axis travel: X 275 mm / Y +50 to −40 mm / Z 700 mm • Rapid traverse X/Y/Z: 15 / 15 / 24 m/min Main spindle • Maximum spindle speed: 4.000 rpm • Spindle nose: A8/DIN • Chuck size: 250 mm • Spindle power: 21/27 kW • Torque: 201/258 Nm Sub-spindle • Maximum spindle speed: 6.000 rpm • Chuck size: 165 mm • Power: 10/12 kW • Torque: 64/76 Nm Turret and driven tools • Up to 16 tool positions • Driven tool speed: up to 6,000 rpm • Driven tool power: 2.3/4.5 kW • Driven tool torque: 5/10 Nm Included equipment • Chip conveyor • Parts catcher • Tool holders shown in the photos Included driven tool holders: 8 • 3 radial driven tool holders • 5 axial driven tool holders • 2 of the axial holders are double-sided Bar feeder The machine is sold together with a Breuning IRCO ILS-SSL 70 bar feeder. • Manufacturer: Breuning IRCO • Model: ILS-SSL 70 • Type: SSL-7012-III • Year of manufacture: 2018 • Voltage: 200–500 V • Power: 1 kVA • Weight: 500 kg Operating hours • Main spindle operating hours: approx. 9.300 h • Sub-spindle operating hours: approx. 3.300 h • Total machine power-on hours: approx. 28.500 h It is connected and available for inspection and testing by prior arrangement. The machine is available immediately.

Condition: used, Correa Model 17D CNC Bed Type CNC Milling Machine, NEW 2002 HEIDENHAIN TNC-426 CNC Control X-axis: 2000 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Taper ISO 50 Speed range: 20 - 3000 rpm Ledpfx Ajzmyurjiferp Spindle power: 17 kW

Condition: used, Year of construction: 2015, operating hours: 9,779 h, Tsugami HS207-5AX : Lsdpfozmwn Aox Aiforp Year 2015 Production hours : 9779 h Bar capacity 20mm max Swarf conveyor LNS Motorised B-axis LNS barloader Express 320 year 2017 Parts belt conveyor Fanuc command 31i Model B5 HP pump 90 bars /21l Transfomator

Condition: used, Year of construction: 2014, operating hours: 14,328 h, functionality: fully functional, Tsugami HS327-5AX Año 2014 Horas de producción: 14 328 h Capacidad máxima de barra: 32 mm Lodpfjzmwc Tex Aifsrp Transportador de virutas Eje B motorizado Cargador de barras LNS Express 332, año 2016 Transportador de piezas por cinta Control Fanuc 31i, modelo B5 Bomba HP: 80 bares / 21 l Transformador

Condition: good (used), Year of construction: 2000, CNC lathe, manufactured by CMZ, model TBI450, year 2000. Lredpfjzmvzbjx Aifjp

Condition: excellent (used), Year of construction: 2006, operating hours: 6,500 h, functionality: fully functional, turning length: 600 mm, turning diameter: 320 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 250 mm, travel distance Z-axis: 600 mm, bar diameter (max.): 60 mm, Equipment: rotational speed infinitely variable, CNC turning and milling center GILDEMEISTER CTX 410 V3 Year of manufacture: 2006 Control system: Heidenhain Operating hours: 6,500 hours Technical data: Main spindle speed: 20 - 5,000 rpm Drive power: 21 kW Torque: 420 Nm Travel distances: X-axis: 250 mm Lrsdpjzmp Alofx Aifop Z-axis: 600 mm Turret: 12 stations Tool holder: VDI 30 Drive power: Speed: Accessories: - Coolant system - Chip conveyor - 3-jaw chuck - Various tool holders

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 15995729164, spindle speed (min.): 24,000 rpm, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, overall weight: 3,400 kg, controller manufacturer: Siemens, controller model: 840D, workpiece length (max.): 2,340 mm, workpiece width (max.): 1,650 mm, workpiece height (max.): 2,500 mm, 2013 DMG Mill Tap 700 Made in Germany. Equipped with below options 24000rpm spindle, 25 tool station (5th Axis) LEHMANN EA-507 CNC Rotary Table Production package TSC 20bar Chip conveyor Renishaw probe OMP 60 + OTS tool setter Main Spindle needs repair Technical Specifications Year of Manufacture: 2013 Control Unit: Siemens 840D Solution line X-Axis Travel: 700 mm Y-Axis Travel: 420 mm Lodpfx Aezmggneiforp Z-Axis Travel: 380 mm Table Size: 840 x 420 mm (Max load: 400 kg) Spindle Taper: BT 30 / BBT 30Spindle Speed: 24,000 rpm Tool Changer (ATC): 25-station pick-up system Rapid Traverse (X/Y/Z): 60 / 60 / 60 m/min Machine Weight: Approx. 3,400 kg Overall Dimensions: 1,650 x 2,340 x 2,500 mm Included Accessories / Equipment pL LEHMANN EA-507 CNC Rotary Table (5th Axis) with complete cabling/integration.

Condition: excellent (used), functionality: fully functional, turning length: 1,000 mm, turning diameter: 350 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, CNC Lathe Manufacturer: Okuma Model: LB15 II-M 1SC-1000 Year of Manufacture: 1996 Control: OSP-7000L Country of Origin: Japan Delivery: Ex-stock Machine Features - Long turning length - Tailstock - Chip conveyor - Live tooling - One touch - IGF - Touch setter Technical Specifications - Working Areas - Swing diameter: 340 mm - Max. turning diameter: 350 mm (chuck work) - Max. turning length: 1000 mm Travel Distances - X-axis: 260 mm - Z-axis: 1020 mm Spindle - Speed: 45~4500 rpm - Standard spindle bore diameter: 62 mm - Spindle front bearing bore diameter: 100 mm - Chuck passage: 52 mm Turret - Number of stations: 12 - Tool holder: VDI40 - Indexing time station to station: 0.1 sec Ledozmgcvjpfx Aifjrp Feed Rates - Rapid traverse X/Z: 15,000/20,000 mm/min Tailstock - Quill diameter: 90 mm - Quill stroke: 120 mm Main Drive - Spindle motor: 15/11 kW Machine Dimensions: approx. 3315 x 1895 mm Machine Height: approx. 1905 mm Weight: approx. 5700 kg Optional - Transport organization and handling - Machine installation and setup - Commissioning of the machine

Condition: good (used), Year of construction: 2009, functionality: fully functional, turning length: 660 mm, turning diameter: 340 mm, spindle speed (max.): 400 rpm, spindle bore: 86 mm, travel distance X-axis: 245 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 710 mm, rapid traverse X-axis: 16,000 m/min, rapid traverse Y-axis: 16,000 m/min, rapid traverse Z-axis: 20,000 m/min, rotational speed (max.): 4,000 rpm, spindle nose: JIS A2-6, Number of stations: 12-station rotary tool turret (all stations suitable for powered tools) Tool holder: Square 25 mm / Drill shank max. ø 40 mm Switching time (station to station): approx. 0.35 seconds Speed of powered tools: Max. 4,000 rpm Drive power of powered tools: 5.5 kW Control: FANUC Series 18i-TB Machine weight: approx. 6,500 kg x, z, c, y, a-axis Bar loader Chip conveyor The machine is in very good condition and is immediately available. We can also deliver and install the machine for you. We offer you a comprehensive, hassle-free package. Ledpozmfxpsfx Aiforp Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Disassembly, transport, and professional installation – all from a single source. Billing based on individual terms and conditions and duration. Contact us for your personal offer.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, Equipped with DMG MORI M730 UM MAPPS CELOS control system. Year of manufacture: 10/2017, Commissioned: 1/2018 Turning diameter: 356 mm Travel in X: 260 mm Travel in Z: 795 mm Travel in Y: +- 50 mm Spindle bore: 91 mm Main spindle speed range: 4000 rpm Lrsdpfjzmfxiex Aifjp Counter spindle speed range: 4500 rpm Driven tool speed range: 10000 rpm Including the following accessories: Work area door with interior lighting 20-position turret with 20 driven stations C-axis, Y-axis Touch probe (Marposs) Counter spindle, parts catcher Workpiece conveyor, workpiece unloader Manual tool presetter (HS) Removable tool presetter (GS) 3-jaw chuck, hydraulic, Kitagawa BB 210 with foot pedal (HS) 3-jaw chuck, hydraulic, Kitagawa B 208 with foot pedal (GS) Bar loader IRCO BREUNING ILS - MUK Various tool holders, 0-40 mm Direct path measuring system, X, Y, Z axes Signal lamp, 4-color Chip conveyor High-pressure coolant system with compact filter unit, 70 bar / 700 l tank Operating manuals

Condition: good (used), Year of construction: 1998, Used Mazak lathe Type: Quick Turn 10N-U Lrsdpfx Ajzl Ruaeifjp Maximum turning length: 450 mm Spindle bore: 55 mm Mazatrol CAM T-2 control system Includes various tooling

Condition: excellent (used), functionality: fully functional, • Muratec MT 25 MYY / Gantry Loader / Bar Loader. • Two C-axes. • Two Y-axes. • Highly automated machine. • 8 kg gantry loader robot system for part loading and unloading. • 1.5-meter CNC bar feeder. • Machine with 9 controlled axes. • Two twin spindles. • Two turrets. • Turrets with 15 positions each, all motorized. • Integrated spindle motor: 15 kW. • Motor starting torque: 420 N·m. • Motorized tool drive: 4 kW. • Spindle nose: A2-6. • Maximum turning diameter: 370 mm. • Maximum turning length: 920 mm. • Bar capacity: 67 mm. Ledpfjzl Rflex Aiforp • Prismatic guides on all axes. • Two Kitagawa 250 mm hydraulic chucks per spindle. • Separate compartment for the inspection of machined parts. • Automatic finished-part pickup arm for small parts. • Automatic secondary spindle cleaning with air or coolant. • Conveyor belt for finished parts. • Automatic load monitoring and tool wear detection. • Automatic inter-spindle part transfer system with torque control. • Fanuc CNC. • Fanuc motors, servos, electronics, and controls. • Rapid traverse speeds: 20 and 25 m/min. • Main spindle speed: 3,500 rpm. • Motorized tool speed: 3,000 rpm. • Turret indexing time: 0.2 seconds. • Rear-mounted, hinged chip conveyor. • Complete set of static tool holders for external and internal machining included. • Complete set of motor-driven axial and radial tool holders included. • Machine currently in operation. • Weight: 10,800 kg. • Immediate availability, unless previously sold.