Cm Industrie

Condition: good (used), Year of construction: 2005, functionality: fully functional, Vertical machining center DECKEL MAHO DMF 250 Linear Year of manufacture: 2005 Control: Heidenhain iTNC 530 Technical data: Travel X: 2,500 mm Travel Y: 920 mm Travel Z: 820 mm Worktable: 3,100 x 900 mm Spindle taper: SK 50 Spindle speed: max. 12,000 rpm Tool changer: 30 positions Equipped with: - Chip conveyor - Coolant through spindle 40 bar - Operating manual Machine dimensions LxWxH: 6,000 x 3,800 x 2,950 mm Nksdpfx Abjyxfbksvow Machine weight: 25,000 kg The machine can be inspected under power by appointment.

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VTC 760 was manufactured in 2020. It features an X-axis travel of 1740 mm, Y-axis travel of 760 mm, and Z-axis travel of 660 mm. The machine includes a spacious table size of 2300 x 760 mm and a maximum workpiece weight capacity of 1400 kg. If you are looking to get high-quality machining capabilities, consider the Mazak VTC 760 vertical machining centre we have for sale. Contact us for further details. • Control: Smooth G • Table size: 2300 x 760 mm • Distance table to spindle nose: 180 mm • Max workpiece size: 4100 x 905 x 790 mm • Table surface: T-slots • Max workpiece weight: 1400 kg • Rapid feed (X/Y/Z): 42,000 mm/min • Coolant pressure: 18 bar (additional tank) Additional equipment • Fume extractor • Schunk vises • Zero-point clamping system • Nakanishi high-speed spindle (50,000 rpm) • Tooling sets with cabinets and benches Technical Specification Taper Size ISO 40 Nedoyxdtfopfx Abvjkw

Condition: ready for operation (used), Year of construction: 1990, travel distance X-axis: 4,000 mm, spindle speed (max.): 6,000 rpm, number of axes: 4, This 4-axis STAMA MC 540S was manufactured in 1990. It features an integrated Fibro NC1.03 rotary axis, providing enhanced machining capabilities. The machine operates at a voltage of 380 V with a nominal current of 120 A. If you are looking to get high-quality machining capabilities, consider the STAMA MC 540S vertical machining center we have for sale. Contact us for further details. • Operation voltage: 380 V / 3-phase / 50 Hz • Nominal current: 120 A Njdpfx Abjyxcgqevjkw Additional equipment • Rotary axis: Integrated Fibro NC1.03

Condition: ready for operation (used), Year of construction: 1995, travel distance X-axis: 3,000 mm, spindle speed (max.): 6,000 rpm, number of axes: 4, This 4-axis STAMA MC 540S was manufactured in 1995. It operates on a 3-phase AC electrical system with a supply voltage of 400 V and a nominal current of 70 A. Includes a rotary axis Fibro NC1.03. If you are looking to get high-quality machining capabilities, consider the STAMA MC 540S vertical machining centre we have for sale. Contact us for further details. • Supply voltage: 400 V • Electrical system: 3-phase AC • Frequency: 50 Hz Nksdpfsyxcgkex Abvow • Nominal current: 70 A

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,880 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 800 mm, nominal power (apparent): 40 kVA, controller model: Fanuc, overall weight: 16,000 kg, number of slots in tool magazine: 24, input voltage: 380 V, type of input current: three-phase, Type: Heavy-Duty CNC Vertical Machining Center Model: VMC-1880 Year: 2008 Nkjdpfx Abeyw Uiujvew Table size: approx. 2000×800 mm Spindle: BT 50 spindle taper Spindle speed: 6000-8000 rpm Spindle motor: 15-22 kW Tool changer: Chain-type ATC (20-24 tools) Control system: FANUC CNC control(0i-MC series) FANUC alpha servo drives Machine weight: 10,000-12,000 kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 27,865 h, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 12,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis DECKEL MAHO DMF 220 Linear was manufactured in 2004. It features impressive travels of approximately 220 cm in the X-axis, 56 cm in the Y-axis, and 72 cm in the Z-axis. The machine has a maximum speed of around 18,000 rpm and includes a chip conveyor and coolant filter unit. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMF 220 Linear vertical machining centre we have for sale. Contact us for further details. • Connection values: 400V/50Hz • Swing door machining possible • Operating hours: 44,199 Additional equipment • Chip conveyor BLECHTECHNIK DMF 220 (2003) Nodpsyw Rapjfx Abvskw • Coolant filter unit DMG

Condition: ready for operation (used), Year of construction: 2003, Immediately available due to business liquidation: CNC Travelling Column Machining Centre Hedelius Type CB 80 – 2300 Year of manufacture 2003 CNC control Heidenhain iTNC 530 Very low spindle hours: 11,500 h Nodpfx Ajyw Nbfjbvokw Table 2900 x 750 mm Travel X/Y/Z 2300 / 800 / 600 mm Table load capacity 2800 kg Distance spindle – table 10 – 740 mm Spindle SK 40 Tool magazine with 30 positions Spindle speeds 30 – 8,000 rpm Feed rates 0 – 3,000 mm/min on all axes Drive power 25 kW Weight 13 tonnes Price: EUR 19,500 plus VAT ex location

Condition: ready for operation (used), Year of construction: 1997, Immediately available from toolmaking: CNC vertical machining center Hedelius Type BC 40 D/20 Nkjdeyw Na Iopfx Abvsw Year of manufacture: 1997 Control: Siemens Sinumerik 840 D 4th axis Table: 2 x 1100 x 420 mm Pendulum machining possible Table load: 500 kg Travel (X/Y/Z): 1700/400/400 mm SK 40 Magazine for 20 tools Spindle speeds: 30 – 6000 rpm Rapid traverse in all axes: 30 m/min Drive power: 20 kW Weight: 7 t Price: EUR 12,500.— plus VAT ex location

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Y travel: 500 mm Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Table load: 2000 kp Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Tool holder: HSK 63 A Spindle speeds – stepless: 0-15000 rpm Spindle drive: 20 kW Spindle bearing diameter: 70 mm Tool diameter: 63 /126 mm Tool magazine: 40 pcs Weight: 12 t Total power requirement: 65 kVA Nsdpfoyw I Hyjx Abvjkw - Equipment: chip conveyor

Condition: excellent (used), Year of construction: 2012, Data: Ibarmia gantry-type machining center (3 axes) XYZ travel: 3050 x 600 x 900 mm Spindle speed: 12,000 rpm Tool magazine: 60 positions, HSK 63 High-pressure coolant: 60 bar Tool measurement: Renishaw Touch probe: Renishaw Nksdsywz H Hspfx Abvow Coolant system / band filter Chip conveyor

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Hedelius C100 with full equipment: Through-spindle coolant (IKZ), 3D probe, laser tool measurement, HSK63 spindle 18,000 rpm, 40 tool magazine positions. X2500mm Y1000mm Z770mm. Enclosure with automatic roof. Heidenhain 530 control. Absolent extraction (maintenance-free). Nodpfxoyww Sls Abvekw

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, travel distance X-axis: 2,000 mm, travel distance Y-axis: 450 mm, nominal power (apparent): 37 kVA, controller manufacturer: Sinumerik 840 D, overall weight: 7,000 kg, spindle speed (min.): 10,000 rpm, Equipment: chip conveyor, - SK 40 - The machine is currently idle. - The buffer battery is depleted, resulting in the PLC connection being interrupted. Before commissioning, the connection must be restored; otherwise, axis movement is not possible. The machine can be inspected under power at any time. Nkedpfjywpa Iex Abvew

Condition: excellent (used), Year of construction: 2001, Mazak 3-axis vertical machining center in very good condition. About 8500 spindle hours and was only used for light work (machining Aluminium). Machine can be inspected under power upon appointment. Immediately available for delivery. Njdsywhbkjpfx Abvokw Including: High pressure pump - 15 bar cooling through spindle Chip conveyor FH 3D probe Control Mazatrol Fusion 640M Max spindle speed 10000 rpm X-Axis Movement 1740 mm Y-Axis Movement 760 mm Z-Axis Movement 660 mm Tool holder SK40 Capacity tool magazine 60 positions Table length 2000 mm Table width 760 mm Table load 1400 kg Machine weight 10500 kg Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, Year of construction: 1988, x-travel 600 mm y-travel 400 mm z-travel 400 mm Spindle Speed 4.000 U/min. table surface area 800 x 425 mm tool taper SK 40 Njdpfxsyv N Hfe Abvekw feed 2.000 mm/min total power requirement 5 kW machine weight ab. 2.000 kg

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 7,200 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 5,500 W, tool weight: 3,000 g, number of axes: 4, This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of approximately 7200 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine is equipped with a powerful 5.5 kW electrospindle and a maximum spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the MECAL MC 305 machine we have for sale. Contact us for further details. • Control system: MMI CNC control • Operating system: Windows OEM software • Number of controlled axes: 4 (maximum configurable axes: 5) • C-axis rotation: 180° (-90° / +90°) • Drive system: Servo motors • Axis control: CNC controlled • Spindle type: Electrospindle • Tool magazine capacity: 11 positions • Maximum tool diameter: 200 mm • Maximum tool length: 150 mm • Maximum X-axis feed speed: 80 m/min • Maximum Y-axis feed speed: 60 m/min • Maximum Z-axis feed speed: 40 m/min • Voltage: 400 V (tolerance ±10%) • Frequency: 50/60 Hz • Total power consumption: approx. 7.2 kVA • Maximum current: approx. 18 A • Compressed air pressure requirement: approx. 6 bar • Machine structure: Steel machine frame Technical Specification Taper Size ISO 30 Nkodpfx Absyv H Nkjvjw

Condition: used, Year of construction: 2021, functionality: fully functional, Control: FANUC 0i x-travel: 900 mm y-travel: 460 mm z-travel: 520 mm Table dimensions (LxW): 1.050 x 459 mm max. table load: 600 kg Njdsyv Eqmjpfx Abvekw rapid travel x/y/z: 36 / 36 / 36 m/min max. spindle speed: 8.000 rpm Tool magazine for 30 + 1 tools chip conveyor Hand-held spray gun with coolant RENISHAW touch and spindle probe

Condition: used, Year of construction: 2023, x-travel 3000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 15 kW distance spindle centre table top edge 140 - 860 mm table load 2500 Kg rapid travel x/y/z 50 m/min table width 3500 mm table length 820 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 500 l total power requirement 46,7 kW weight of the machine ca. 15,4 t dimensions of the machine ca. 5,3 x 3,6 x 3,3 m Standard machine including the following optional extras: - Provision for dual oil mist extraction - Air cooling via the rotating milling spindle - 48-tool magazine - Pulse handwheel - 3-colour LED signal light - Additional work area lighting - Air blow-off device on the milling spindle - High-pressure coolant supply through the spindle (15 bar) - Provision for MAZAK Monitoring - Chip conveyor with left-hand ejection (Crowther) - Manual grease gun - Grease cartridge - Mazak API - Drilling cycle with automatic chip breaking - Synchronous thread cutting - Rapid traverse with constant angle of inclination STANDARD ACCESSORIES Adaptation for the European market USB port (1 port) Mazak standard colour Work area lighting SAFETY FEATURES Operator door with interlock switch Work area cladding The splash guard enclosure encloses the work area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply via spindle (pump pressure = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of high-quality components. Nkodsyvvluepfx Abvow FACTORY AUTOMATION Automatic start/stop and warm-up function Automatic activation of a warm-up via digital timer MEASURING SYSTEM Tool length measurement and tool breakage detection NUMERICAL CONTROL Horizontally adjustable NC control panel Relocation Detector Mazatrol SmoothG control 19" colour LCD screen (touch screen) Mazak Tornado tapping/drilling cycle (Mazatrol) EIA/ISO input function Tool path verification in the background 3D coordinate conversion Shape compensation for rotating axes Mazacc-2D software (contour correction) Mazacc-3D software package MAZACC-3D high-speed software package (NO456) is additionally required. Control system with high smoothing Interface for LAN SD memory card interface Smooth Standard Software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High-precision control for finishing - Seamless corner point control - Variable acceleration control - Ultra-high-speed machining mode - NO498 Rapid traverse paths, rounding function Absolute positioning system - All dimensions, weights and performance specifications are subject to change - - Used machine without warranty - - Subject to prior sale -

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, workpiece weight (max.): 800 kg, controller model: HEIDENHAIN iTNC 530, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 6,000 mm Travel Y-axis: 800 mm Nsdsyvudvspfx Abvekw Travel Z-axis: 600 mm Spindle mount: SK 50 Spindle speed: 20 – 9,000 rpm Torque: max. 165 Nm Table load capacity: 3,000 kg Workpiece weight: max. 800 kg MACHINE DETAILS Control: HEIDENHAIN iTNC 530 Main drive: 60 kW Machine weight: approx. 24 t

Condition: good (used), Year of construction: 2016, Posmill 2050, year of manufacture 2016, Heidenhain control, X/Y/Z travel 2050/1050/780 mm, 60-tool changer, spindle speed up to 12,000 rpm, HSK 63 tool holder, 3D infrared measuring probe MH, Blum laser tool measurement. Nkjdpfx Aboyvqczjvew

Condition: used, x-travel / mm y-travel / mm Nkodpfx Abeyvkwlovow z-travel / mm

Condition: defective spare-parts repository (used), Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 2,800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 2,700 mm, feed length Y-axis: 520 mm, feed length Z-axis: 630 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik 810, total height: 2,800 mm, total length: 4,450 mm, total width: 2,850 mm, table width: 520 mm, table length: 1,200 mm, rotational speed (max.): 10,500 rpm, overall weight: 12,100 kg, spindle speed (max.): 10,500 rpm, spindle motor power: 36,000 W, spindle nose: SK50, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, We are offering this used Chiron FZ 28 L vertical machining center, year of manufacture 1996. Model: FZ 28 L Serial number: 137-28 Year of manufacture: 1996 Weight: 12,100 kg Number of driven axes: 3 X-axis: 2800 mm Y-axis: 520 mm Z-axis: 630 mm Table clamping surface: 1200 x 520 mm (two machine tables installed) Spindle speed: 0 - 10,500 rpm Power output: 36 kW Nodjyvg Akepfx Abvskw Tool holder: SK50 Tool changer for 40 tools Automatic tool changer Feed / Rapid traverse: X 40 m/min - Y/Z 30 m/min Coolant system: available Chip conveyor: available Hydraulic clamping system: available Note: The machine has a technical defect on the Z-axis (further information on request). The machine is being sold in its current condition. Dismantling, collection and loading are to be carried out by the buyer. If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC machining center Hedelius C50-1800 Control: Heidenhain iTNC 530 Year of manufacture: 2008 Internal machine no.: 6 Travel paths: X axis: 1,800 mm Y axis: 510 mm Z axis: 480 mm Clamping area: 2x 1,000 x 510 mm Pendulum mode: 2 x 700 x 510 mm Spindle taper: SK 40 Tool magazine: 20 positions Celox spindle speed: 50 – 12,000 rpm Equipment - 3D Formingstar package - 3D Heidenhain measuring probe - Chip conveyor - Partition wall - LTA extraction system - Water tank, high-pressure pump 20 bar - Machine enclosure Nkjdpfeyvgxxjx Abvow

Condition: excellent (used), Year of construction: 2008, operating hours: 40,255 h, functionality: fully functional, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal travelling-column machining center. The machine was built in 2008 and was modernized / totally retrofitted in 2022 with Siemens Sinumerik 840D Solution Line control. Equipped with 5-axis simultaneous machining license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel and electronic handwheel. Technical data: Manufacturer: DMG DECKEL MAHO Type: DMF 220 linear Machine type: 5-axis universal machining center / travelling-column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Total Retrofit: Siemens CNC / drive modernization in 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool taper: SK 40 Table load: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Fuse protection: 125 A Supply voltage: 400 V Frequency: 50 Hz AC control voltage: 230 V DC control voltage: 24 V Power-on hours: approx. 40,255 h Spindle / working hours: approx. 13,082 h CNC / drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP control panel: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / licenses: 5-axis simultaneous machining license Axis licenses Operator software license Equipment: Integrated swivelling table / trunnion-type table setup Paper band filter unit Nkjdpoyuzg Hefx Abvew Coolant / filter unit Electrical cabinet Full enclosure Working area lighting Siemens control panel Condition: Machine in well-maintained condition Modernized Siemens control and drive technology 5-axis simultaneous machining available

Condition: used, Year of construction: 2001, travel distance X-axis: 2,100 mm, CNC controller: HEIDENHAIN TNC430 Axes X-axis travel mm: 2100 Y-axis travel mm: 720 Z-axis travel mm: 600 Worktable Table dimensions mm: 2800x650 Max. workpiece weight kg: 2500 Spindle Spindle speed rpm: 30 - 8.000 Nkjdpfjyuu R Sox Abvew Spindle drive power kW: 16,25 Spindle torque Nm: 102 Tool system Tool holder: SK40 Tool magazine slots: 30

Condition: excellent (used), Year of construction: 2013, operating hours: 10,370 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, controller model: 530, coolant supply: 20 bar, Matec 5 axes Nodpeyuuz Rofx Abvekw Rotary table, speed 8 rpm