machinehandel Jespers

Condition: used, Doypack 210 Filler with Pouch Cassette to Infeed Open, Fill and Seal Pouch, capable of 200g - 1kg Size Pouches, 1000kg in 1 Hour, capable of consistent weights within 2-3 grams depending on the product type. Location: These lots are located in Burnham-on-Crouch, Essex, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Ffsdjyimd Dopfx Abusu

Condition: used, Doypack 410 Filler with Pouch Cassette to Infeed Open, Fill and Seal Pouch, Capable of 5kg Size Pouches, 600kg in 15 Minutes, capable of consistent weights within 2-3 grams depending on the product type. Fedpoyil Sgsfx Abusfu Location: These lots are located in Burnham-on-Crouch, Essex, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, 10 Bin Food Grade Multi Head Filling Machine complete with Loading Hopper with 300kg Capacity, Hopper feeds Bucket Elevate on Machine demand and applies product into Multihead Bins to service Doypack Machines. Can be set up on dual floors (as pictured) or utilise Tower Framework. All Multihead Bins are serviceable and can be cleaned down, PLC Controls allow programming both in Multihead Element but also on the Doypack Machines. Location: These lots are located in Burnham-on-Crouch, Essex, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Fodpfxjyil Nlo Abuofu

Condition: used, Automated Fishing Bait Boilie Line with Stainless Steel Eurobin Lifter for adding Dough into the Extruder, Steel Safety Caging and Safety Interlock Platform, (2) x Eurobins allow filling in Batches, Kilia Extruder capable of large outputs, features additional Guarding on the top of the Extruder to ensure safety with use of the Eurobin Lifter. Extruder Serviced Bait Tools Rolling Machine, which forms Dough Balls in sizes between 12 and 24mm (additional options of sizes available from Manufacturer) built in Cut-off for Waste Dough to be re-used and reduce need for Manual Monitoring, Dual Direction PVC Infeed Belt ensure less marking of product in Soft Dough Stage products then move to the Boiler Unit. This has Variable Speed Belt and PLC Connection to Gas System for Timing and Temperature Regulation. All automated and capable of maintaining High Infeed Dough Quantity, Post Cook Outfeed Perforated Belt with 6 Fans Array for increased drying of product, Belt can be varied in speed to suit requirement, Belt terminates into Cassette Tray Filler. Fills to required weights of 9kg (this is variable) further Array of Fans below Tray Drying Line to further dry the products. Machine capable at highest rate 600kg per hour of Finished Products, Waste Quantity when set up correctly yields less than 0.5%. Location: These lots are located in Burnham-on-Crouch, Essex, UK. Ffjdeyil Easpfx Abuou

Condition: good (used), SPM Vibro Polishing Machine Model LPG - EVO - MAG (UP1) With Allen Bradley Touchscreen Control TECHNICAL DATA- Machine Power Supply Voltage VAC 400. Filtering Unit Power Supply Voltage VAC 230. Total Installed Electrical Power A 22 - 32. Power Supply Frequency Hz 50-60. Main Air Supply Pressure 6 bar. Pinch Valves Air Supply Circuit Pressure 2-3,5 bar. Diaphragm Valves Air Supply Circuit Pressure 6 bar. Compressed Air Supply Fitting G 3/8. Mains Water Supply Pressure 2 bar. Mains Water Supply Fitting G 3/4. Box Vibration Motor Power 4kW. Washing Unit Vibration Motor Power 3,2 + 3,2kW. Vacuum Power 4kW. Box Load Capacity 600kg. Box Dimensions W620 x D620 x 730mm. Washing Unit Capacity 315 Litres. Washing Unit Load Capacity (Polishing Media) 1,500kg. Delivery Pump Flow Rate L/s 0÷52 l/min (3,1 m³/h). Discharge Pump Flow Rate L/s 0÷52 l/min (3,1 m³/h). Vacuum Weight 170kg. Vacuum Dimensions W1,130 x D600 x H1,530mm. Total Machine Weight 2,400kg. Machine Overall Dimensions Without Cabin W2,310 x D1,500 x H1,750mm. Total Cabin Weight 600kg. Machine Overall Dimensions With Cabin W3,200 x D1,900 x H1,910mm. Ffjdoyilv Ejpfx Abuou With Soundproof Cabin, Pneumatic Loading Door, Polishing Fluid Filtration Tank, Clean Fluid Tank, Used Fluid Tank, Flexible Hose For Manual Suction & Signal Tower.

Condition: ready for operation (used), ByPump 50 APC - Pump output: 55 000 psi 2 cutting heads, each with drill unit cutting cap: 200 mm with shuttle table with automatic cleaning system with container for abrasive material (max 2 ton) cutting speed: 35 m/min Ffjdpfx Abjyigupeuou positioning speed: 6084 m/min X-travel: 4000 mm Y-travel: 2300 mm max workpiece height: 230 mm Touchscreen control Software included Spare parts included Power: 52,5 kW Workarea: 4020 x 2100 mm Number of jets: 2x Software: ByVision

Condition: used, Flackler Aut 1000 VAC Rotary Deburrer/Polisher, 1000mm Feed Belt. S/No. 1705 (2013). Country of Origin: Denmark Location: These lots are located in Hull, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Fedpfjyid R Iox Abusfu

Year of construction: 2010, condition: used, Esprit lightning HD2000 Plasma Cutter. Country of Origin: United Kingdom with Hypertherm Edge Pro CNC Control. Country of Origin: U.S.A., 2000mm x 6500mm Bed, Hypertherm HPR 260XD Plasma Generator. S/No. ESP-03-0820 (2010) Ffedpfx Aeyid Rnjbuou Location: These lots are located in Hull, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 2019, condition: used, SPR Model LTWC 4020 7 Pallet Compact Laser Tower. S/No. AZN-0249 (2019) Ffjdpfx Ajyidv Djbusu High Bid is subject to vendor approval Location: These lots are located in Hull, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 2021, operating hours: 100 h, condition: excellent (used), functionality: fully functional, Drilling and coring equipment (originally for a Fraste Multidrill but adaptable to other machines). Avegar 140mm (HEX41), Bulldog chisel 152mm (HEX41, hammer head, cardan, split spoon casing, ... Some of this equipment is new. The rest has seen very little use. Some measurements are shown in the photos. Please do not hesitate to contact the seller for further measurements or to arrange a viewing. Price negotiable. Ffodpfeyidu Tsx Abuju

Year of construction: 2017, condition: used, Chester Machine Tools Chieftain 2660 Lathe with Quark DRO, Split Bed, 1400mm Between Centres, 700mm Swing Over Bed, 300mm Sanou 3 Jaw Chuck, 100mm Through Bore, 36rpm min 1600 max, Auto Traverse X & Y, Quick Change 2 Position Tool Post. S/No. 170611104 (2017). Country of Origin: United Kingdom Fjdoyidngopfx Abusfu Location: These lots are located in York, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, For sale: Our Montana Crystal Rock grinding machine at the end of the season (April 12) due to upgrading to a Jupiter. The machine was newly purchased in 2019, has been serviced annually, and is in excellent, well-maintained condition. Current cycle count: approx. 6,900 pairs of skis ground. The system is still in operation and can be inspected or tested up to April 12. Ffedpfx Aoyh Upfebuou

Year of construction: 2019, condition: used, Year: 2019 Condition: very good, functional Counter reading: 2.5 million Technical specification: - max. untrimmed book size - 330 x 330 mm - min. untrimmed book size - 145 x 105 mm - max. trimmed book size 300 x 300 mm- - min. trimmed book size - 139 x 99 mm - standard size trimmed - A5 / A4 - trim height - 1 – 51 mm - pressure - 4 kN – 8 kN Description: Fedpfx Abjyh Nnieujfu The HT-80 trimmer is very stable and can be used as a separate device, or integrated into a system solution with machines such as BQ-500, BQ-470, SB-07 or SB-09/s. The machine has a very short response and extremely easy operation thanks to the color touch screen. The HT-80 processes a wide range of formats and always clean and precise cuts

Year of construction: 2004, operating hours: 8,000 h, condition: repair required (used), functionality: not functional, machine/vehicle number: GLCI000199, Granite base measuring 900 mm x 1500 mm with a thickness of 250 mm, featuring a gantry structure and Z-arm equipped with a Renishaw PH10MQ probe head and Renishaw PHC10-2 probe head controller. All listed components are functional and can operate independently. Currently, the machine is non-operational due to the absence of the B3C controller, which processes data from the machine and transfers it to a PC. All axis scales and the probe head are fully operational. The equipment only requires a retrofit of the controller to become functional. Last calibration according to ENAC standards was in February 2019. (E = 1.9+3L/1000). Unused since 2020. Removal and transport are at the buyer's expense unless otherwise agreed and are not included in the sale price. Fodpfoyh H Dhjx Abuofu

Condition: used, 20 ft Containerised Water Heater (Kerosene fuel) Used to provide hot water for 33 bedroom and 2 kitchen venue whilst works undertaken for new integral boiler/plant room. 2 x 150kw output boilers Ffsdpfx Absyhzawjuou Currently decommissioned but can be recommissioned for demonstration with deposit payment. Buyer to collect only and prepare for collection. Ready for immediate collection. Located in Lincolnshire. Any questions, please ask.

Year of construction: 2023, condition: new, Brand: SAMMET Ffjdpfxoyhxm Uo Abusu Type: On/Off Damper Serial Number: 23012‑2129521 Weight: 47 kg Size: DN400 (circular butterfly damper) Manufactured: June 2023 Tag: HS‑270‑800 Configuration: LIN mounting (Sammet-specific orientation/positioning) SAMMET On/Off Damper DN400 1. Product Description SAMMET® On/Off Circular Industrial Damper – DN400, designed for the isolation or full opening of air or process gas ducts. Intended for use in sectors such as power generation, incineration, dust extraction, thermal processing, and industrial ventilation. 2. Technical Specifications 2.1. General Model: Circular On/Off Damper Nominal Diameter: DN400 Weight: 47 kg Construction: Painted steel, circular flanged frame Actuation: Butterfly disc operated by mechanical actuator Orientation: LIN (Sammet-specific configuration) Action type: Opening/closing Typical applications: Air flow, hot or dusty gases, process applications Performs well under moderate differential pressure Low pressure drop when fully open 3. Applications Power plants / industrial boilers Dust extraction systems (ESP, bag filters, etc.) Incineration & flue gas treatment Metallurgy, cement, petrochemical processes High-temperature industrial ventilation Air/gas circuits requiring simple but reliable isolation 4. Condition & Packaging Condition: New, never installed

Year of construction: 2023, condition: new, SAMMET On/Off Damper 1000×500 mm Rectangular Section Industrial Damper – SAMMET® On/Off Damper Equipment designed for binary control (open/close) of air or process gas flow in high-demand industrial installations (power plants, FGD, incineration, dedusting, hot process, isolation systems). Manufacturer: SAMMET Dampers Oy (Finland) Model: On/Off Damper Serial number: 23012‑2129534 Year of manufacture: June 2023 Compliance: CE – Full nameplate present Nominal section (rectangular DN): 1000 × 500 mm Total weight: 164 kg (reinforced steel structure) Construction: welded steel frame, industrial-grade sheet metal, peripheral flange Actuation type: Mechanical On/Off with installed actuator Blade type: Reinforced rectangular blade (central shaft) Closing method: Full shut-off (shut-off type) Main material: Industrial painted carbon steel Sealing: Standard design for air/gas isolation (not 100% gas-tight) This damper is particularly suitable for installations requiring reliable on/off isolation, such as: - Hot air or gas circuits - Combustion or incineration plants - Dedusting / filtration / FGD systems Fjdpfxoyhxmze Abujfu

Year of construction: 2025, condition: new, functionality: fully functional, Opportunity: New wax coating machine for nonwoven fabrics, etc., with cutting unit. The machine is unused, apart from a test run at the manufacturer, and is in its original packaging at our warehouse in Germany. Fodpfxoyhxivs Abusfu

Year of construction: 2025, condition: like new (used), functionality: fully functional, Stainless Steel Mixing Tank 500l speed 23 rpm Ffodpfsyhnn Rex Abuou date of production 2024.12 used 3-4 times only

Condition: ready for operation (used), Strahlmaschine cold jet dry Ice pellet blasting - Décapage a la glace seche - Reinigung mit Trockeneis - Limpiezacon hielo seco - Droog ijs parel straal installatie Aircompressor Altas Copco GR 200 * 20 bar - 200kW - 23 m³/min - 328 working hours Dryer Delair PDH 03114 (Hagoort Produktiemij) * 960 Nm³/h - 25 Bar - 75°C Cleanblast 290 Alpheus CleanBlast integrated pelletizer/blasting system creates small, uniform pellets of dry ice and feeds them into a pressurized air delivery system for cleaning in a variety of industrial applications. The motor system makes pellets on demand, eliminating ice loss due to sublimation, and features an advanced exchanger system that maximizes the conversion of CO2 from a liquid to solid. The system is capable of transporting pellets in-plant via closed gaseous conveyance system, which eliminates the need for dry ice containers, and is available in several configurations for versatility in dry ice pellet production and blast cleaning power. * Dry Ice production: 4,5 kg/min * 2.75 - 20.70 bar * speed of the dry ice pellets can be controlled by panel * controllable discharge pressure * 10HP - 33 kW * dimensions: 1650 x 965 x 1380 mm * weight: 910 kg Tank Alteco GM 27976 Ffsdpfsyhiccsx Abuju * 3000 Liter - Min -10°C Max 50°C - 20.5bar V.R.V. Tank for CO² * 10530 liters - 23 bar - Temp: -60°C

Year of construction: 2017, condition: like new (used), functionality: fully functional, Growing media mixing system consisting of: - 5 x 18m3 feed hoppers; - Screening set consisting of two screens (fine and coarse); - 1 x 10m3 dosing hopper with internal reel; - Dosing system consisting of 5 fertilizer dosers equipped with a weighing system; - 1 x rotary screen for the finished product; - 3 x 25m3 finished product collection hoppers. The system includes connection conveyors and a main electrical control panel. Fsdpfxeyg Eb Eo Abuefu Dismantling, assembly, and transportation are the responsibility of the purchaser.

Condition: ready for operation (used), empty load weight: 900 kg, semi-automatic with hydraulic clamping same as Kaltenbach type KKS Dia saw / abrasive - disk: 425 mm Max dia workpiece at 90°: dia 140 mm Fedpfx Absygyx Souofu Max dia workpiece at 45°: dia 140 mm Max dimensions workpiece at 90°: 300 x 60 mm / 140 x 140 mm Turningspeeds: 13 + 26 m/min Power needed / motorpower: 2,9 kW Angle-input system (mitre)(number+°): R : 60° - L : 90°

Condition: ready for operation (used), power: 15 kW (20.39 HP), empty load weight: 5,200 kg, Punching line for flat iron and corners - CNC controlled (Siemens Sinumerik) - With CNC automatic length feeding system: 7000 mm - 4 punch stations 100 Ton – Cap: Ø 50 in 20 mm thickness - Movements: X=7000 mm, Y:760 mm Fedpfx Aoygyyvebujfu - Max width: 750 mm - Max height: 20 mm in flat steel or 240 mm in U / I beams corners Punchingcapacity: 4 x 100 Ton each Dia x sheetthickness: Ø 39 x 20 mm / Ø 58 in 13 mm / Ø 90 x 8.5 mm Strokes/min: 10 -> 100 str/min Work level: 1075 mm

Condition: ready for operation (used), circular cutting shear Max cutting width (dia): 2000 mm Ffedpjygyycsfx Abuju Max sheetthickness: 5 mm Type: horizontal

Condition: ready for operation (used), Fanuc R-2000iB/165F industriële handlingrobot met R-30la-controller - X-reis of robot: 15 meter - 20 meter werkbereik als je de zwaai aan de linker- en rechterkant meetelt - 6 assen - bereik: 2655 mm - max 165 kg laadvermogen Fsdpfoygyv Rox Abujfu Robot gemonteerd op Winkel robot rupsbanden RLE-2000 Handlingrobot / pick-and-placerobot / montagerobot