WABEX Sp. z o.o.

Condition: used, Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotation. Mill is equipped with electric cabinet, belt cover and set of screens (6 pcs). Specifications: Horsepower: 75 kW Material Of Construction: Stainless steel Number Of Hammers/Row: 96 hammers / 24 rows Djdpfx Abjyhc N Aoujkh Type: "U" type hammers

Condition: used, Used carbon steel grinding mill by Pallmann (Germany) model PR8. Mill has bolted rotor with diameter 795 mm and stator with diameter 800 mm. Belt driven by el. motor 100 kW, 1480 rpm, 380 V, 50 hz. Manual adjustment of gap between milling plates. Mill has mounted 5 nozzles for feeding gas or liquid inside the milling chamber. Front door bolted with central feeding inlet through feeding chute. Bottom discharge. Dkedpsyhc Nvsfx Abuoh

Condition: used, Used pin mill by Jehmlich (Germany) model Rekord D, designed in carbon steel. Mill body made of cast iron. Unit has milling discs with a diameter of 610 mm made of carbon steel. Mill has one fixed and one rotating milling disc driven by a belts driven with an ex proof electric motor with a power of 20 kW, 2940 rpm, 380 V, 50 Hz. Machine is equipped with a stainless steel feeding hopper and bottom unloading. Under the mill outlet is installed a screw conveyor constructed as follows: stainless steel chamber and a galvanized carbon steel screw driven by a gearbox and electric motor with power of 0,75 kW, 3-phase, 50 Hz with an operating speed of 125 rpm. Whole thing is mounted on a frame made of carbon steel. Dkjdpfx Abjygvpasush Specifications: Horsepower: 20 kW Material Of Construction: Cast iron and carbon steel Type Of Mill: Pin mill

Condition: used, Used Buhler horizontal hammer mill. Dkodpfjygvnvjx Abueh - Carbon steel rotor has diameter approximately 980 mm. - Rotor is divided into 3 section. - Rotor has (8) shafts, each shaft is equipped with (10) swing hammers. - Rotor is driven by 75 kW, 380/660 V, 1480 rpm, 50 Hz electrical motor. - Includes number of spare screens and switchboard.

Condition: used, Used Fryma model MS-12 stainless steel coball annular gap bead mill. Grinding chamber volume approximately 0.5 litre capacity with throughput capacity of 5-40 litre per hour (depening on product). Internal ratwed 2.5 bar design pressure. Has external stainless steel jacket rated 2 bar design pressure. Unit driven by 3.37kw electical motor. Unit includes pump. Dksdpfjygvmxox Abush

Year of construction: 1993, condition: used, Manufacturer: Forplex Model : FL 0 Type : Hammer mill Year : 1993 Capacity : 5 - 200 Kg / h Dodeyfw Ihspfx Abujkh Materials: Stainless steel Rotor type: hammer blades (result: fine and very fine) Particle size selection: Screening crown Rotor diameter: 145 mm Grid inner diameter: 150 mm Motor power: 2.2 kW Product feed: vibrating hopper Door security: key to start -> door locked Mobile frame on 4 wheels Support for filter

Year of construction: 1995, condition: used, Manufacturer: Forplex Dkodpoyfw Ibefx Abueh Model : F00 Year : 1995 Type : Hammer mill Material : stainless steel Capacity: a few kg/h. Rotor type: hammers (result: fine and medium-fine) Stator type: fixed hammers Rotor diameter: 85 mm Inner diameter of grid: 100 mm Rotor type: hammer blades (result: fine and very fine) Particle size selection: Screening crown Vibrating feed hopper Motor power: 0.55 kW (3000 rpm) Door security Mobile frame on wheels    

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,153 h, DYNO-MILL KD 6 Agitator Bead Mill (2007) For sale is a DYNO-MILL KD 6 horizontal agitator bead mill, manufactured by Willy A. Bachofen AG (WAB). This machine is a premium Swiss-made unit designed for the continuous dispersion and wet-grinding of pumpable products, ranging from low to high viscosity. This unit was manufactured in 2007 and decommissioned in fully functional, running condition with no known faults. It is distinguished by its exceptionally low usage history, having logged only 1’153 operating hours. It comes equipped with a high-wear-resistant Silicon Carbide (SiSiC) inner cylinder and hardened stainless steel discs. It is sold as a complete bundle, including a peristaltic pump, a tool kit, the original electric cabinet and yttrium-stabilized zirconium balls (used). Highlights • Low Usage: Only 1'153 operating hours—internal mechanics are in excellent condition. • High-End configuration: Fitted with a ceramic Silicon Carbide (SiSiC) inner cylinder (6mm wall thickness) and hardened stainless steel discs for durability and contamination control. Sintered Silicon Carbide (SSiC) prevents product overheating significantly better than Zirconium or Steel liners. • Ready to Run: Sold as a complete package including the Electric Cabinet and a Peristaltic Product Pump. • Features the industry-standard WAB dynamic gap separator and pressure-balanced mechanical seal. • Voltage: Fitted with a modern Danfoss VLT frequency converter featuring wide-range input (380-480V, 50/60Hz), making the machine immediately compatible with both European (400V) and US (480V) power grids without modification Technical Specifications • Manufacturer: Willy A. Bachofen AG (WAB), Switzerland • Model: KD 6 • Grinding Chamber Volume: 6.0 Liters (Net volume ~5.7 Liters) • Throughput: approx. 50 – 200 kg/h (dependent on product/viscosity) • Main Drive: 11 kW Motor (440V / 60Hz rated) • Separation System: Dynamic gap separator (Tungsten Carbide rotor/stator) with adjustable gap width (0.15–1.0 mm) • Shaft Seal: Double mechanical seal (DGD) with integrated pressure rinsing circuit • Cooling: Forced water cooling jacket for the grinding cylinder • Weight: 695 kg 
 Scope of Delivery • Mill: DYNO-MILL KD 6 base unit • Grinding System: Silicon Carbide (SiSiC) Inner Cylinder & Hardened Stainless Steel Discs • Feed Pump: Peristaltic Pump included • Controls: Original Electric Cabinet included • Grinding Media: Ceramic Beads, Zirconia Partially Stabilized with Yttria, four sizes, each approx. 25Kg (0.4 - 0.6 mm / 0.8 - 1.0 mm / 1.2 - 1.4 mm / 1.6 - 1.8mm) • Documentation: Operating instructions and wiring diagrams Condition • Mechanical: Excellent, running condition with no known faults at the time of decommissioning. • Cosmetic: The machine is clean but shows minor cosmetic wear (see pictures for visual details) • Last application: Food Typical Applications • Ideal for fine particle size reduction in industries such as: • Paints, Inks, and Coatings • Agrochemicals and Chemicals • Life Sciences and Microbiology • Food and cosmetics Djdpfxex Tdyzo Abujkh We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: used, Manufacturer: Forplex Model : FL 1 Type: Hammer mill / Fine impact mill Materials: stainless steel Motor power: 4 kW (3000 rpm) Dedpfx Abex R D I Hjuokh Capacity : 25 - 500 Kg / h Rotor: hammer plate Stator: Fixed hammers Grinding: fine/medium-fine Bag filter Refurbished by our teams: – Seals: new – Grinder bearings: new – Motor pulley: new – Door safety device: key + lock + electrical box housing: new (Allen Bradley Guardmaster)

Condition: used, Manufacturer: Forplex Model: FL2 Year: +/- 1985 Type: Hammer mill / Fine impact mill Materials: stainless steel Capacity : 50 - 900 kg / h Motor power: 11 kW (1500 rpm) Rotor: hammer plate Stator: Fixed hammers Hopper Dkedpfxjx R D Ito Abueh Bag filter Maximum filtration air flow: 1200 m3/h Minimum filtration surface area required: 8m2 Refurbished by our teams: - Seals: new - Mill bearings: new - Motor and mill pulley: new - safety device: key + lock + electrical box case: new (Allen Bradley Guardmaster) Static load: 240 kg Dynamic load: 720 kg

Condition: used, Manufacturer: Frewitt Fribourg Model : MGH-6-003 Type : Hammer mill Materials: Stainless steel Classification : Atex Motor Felten & Guilleaume : 4 KW Dkodpfsx R D Dbjx Abueh Rotor milling tool : 260 mm Grinding chamber depth: 19 cm Product output : Ø 250 mm Product feed - >Rotary valve : Frewitt DR 0150 3 (0.12 KW) Various screens supplied with the equipment: 400 - 425 - 450 - 500 µm.

Year of construction: 2003, condition: used, Manufacturer: Zanchetta Model: Piraña Year: 2003   Dkjdox R Dk Iopfx Abush Type : Calibrator for granulated or wet products Applications: pharmaceutical, food, chemical, cosmetics …   Installed electrical power: 3 kW Power supply : 380V – 3 phases – 50 Hz Motor speed : 1440 rpm Dry air consumption: 15 L/min at 2.5 bars Available basket diameters: min Ø 800µ – max 4500µ Treated product moisture content: max. 10 %. 10 % Noise level: < 85 dBA Dimensions: 700 x 1500 x 1400 mm Height to drum axis: 900 mm Product infeed diameter : 150 mm Product outlet diameter : 150 mm Control panel with speed variation Paper documentation available

Year of construction: 2002, condition: used, Manufacturer : Comec Model: Micronet-25-COSM Year : 2002 Type : DISPERSION & MILLING MACHINE   Useful volume : 3 - 22 L Motor power : 4 kW Material : stainless steel Electrical cabinet with variable speed drive. Work cycle timer for automatic stop. Dksdjx R Dgpspfx Abush Double jacket Top loading of liquids Dispersion by deflocculating turbine + sand milling Continuous recirculation between the upper dispersion basket and the lower grinding chamber until the desired fineness is achieved. Cosmetic applications: Particularly suitable for the stable dispersion of oils in water, the addition of pigments and glues, and the mixing of colourants in products such as nail varnishes.

Year of construction: 1990, condition: used, Manufacturer : Fryma Model: MSM-18 Year: 1990   Type : Ball mill type Co-Ball Application: fine grinding of suspensions and highly viscous products. Grinding chamber volume: 1.1 litres Internal overpressure: 2.5 bars Dsdpjx R Dd Iofx Abujkh Jacketed: 2 bars Motor power: 5.5 kW   Capacity: 20 – 80 l/h depending on product.   Examples: food: chocolate coatings / fillings cosmetics: lipsticks, pigment pastes pharmaceutiques : additifs chimiques : laquage pour les pigments, les peintures et les céramiques.  

Year of construction: 1998, condition: used, Manufacturer : Buhler Machine model: K60 Number: SRB 220 Year: 1998 Type: Bead mill / grinder with conical slot agitator.   Dsdpfx Aex R A Daobuekh Dynamic pressure compensation in the mixer Cooling system for stator, rotor and separation ring. Grinding chamber volume: 4.8 dm3 / 4.8 liters Grinding chamber filling volume: 6.4 dm3 / 6.4 Litres Pressure system swept volume: 2.5 dm3 / 2.5 Litres Power rating: 30 kW Variable speed drive   Sold with progressive cavity pump PCM 2.6L10 Documentation available Product example : paints, pastes, …  

Year of construction: 2017, condition: used, Manufacturer: Tietjen Type: NDK 5.2-S Year: 2017 Type : Hammer mill Applications : Designed for wet shredding of bulk food and agricultural products, Motor type : hydraulic Dodsx R Aw Tspfx Abuskh Frame and rotor in stainless steel 304, 1.4301. Weight (excluding motor): 1250 kg Injection nozzles for liquids Bearing temperature monitoring Pneumatically operated inlet flap

Year of construction: 2014, condition: used, Manufacturer: Hosokawa Hosokawa Alpine Model: Contraplex 160 C Year : 2014 Type : pin mill + associated equipment Documentation : Hosokawa Alpine Contraplex 160 C Fine impact mill with two driven pin discs Motor power (frame side) : 7,5 KW Pin speed (frame side) : 16 500 rpm Dodpox R Avvofx Abuskh Number of rows of spindles (frame side) : 3 Motor power (door side) : 5,5 KW Pin speed (door side) : 12 000 rpm Number of rows of spindles (door side) : 2   Powder transfer Bohle MCL 300 container + stand Forced convection vacuum system Unloading hopper Handling trolley  

Condition: refurbished (used), FREWITT MF 8 Granulator / Oscillating Mill This granulator with adjustable sieve/support tray device (thereby preventing excessive sieve and rotor wear) can be used universally for dry granulation, sieving, crushing, wet granulation, etc. with a capacity of 2,000 kg/hour depending on the product properties. Infinitely adjustable gear motor (43-248 oscillations/min) Opening of the granulating chamber: 380 x 490 mm Active sieve area: 775 cm² Outlet height above floor: approx. 100 cm Drive motor: 2.2 kW Dkedpfx Abjxvzf Deuoh Manufacturer: Frewitt Year of construction: 2002 Floor Space: 110 x 120 x 190 cm

Condition: excellent (used), Skid with pin mill made of stainless steel, with a plate diameter of 160 mm, a bag filter, and a hopper. Dkodpfx Aoxpx Dwjbujh

Condition: excellent (used), Knife mill manufactured by COMITROL, model 1700. Motor power: 22 kW. Motor pulley diameter: 100 mm. Mill pulley diameter: 70 mm. Mill rotation speed: 4200 rpm. Dkodsxpx Dkopfx Abuoh

Condition: excellent (used), Year of construction: 2004, overall weight: 500 kg, ATEX air micronizer mill manufactured by BACHILLER in stainless steel, model JET-MILL MSB305. High-efficiency equipment, highly suitable for the micronization of all types of powder products. Includes bag filter reference C9905. Dksdpfx Abexpx Agoueh

Condition: used, Year of construction: 1996, functionality: fully functional, total length: 2,050 mm, total width: 1,020 mm, total height: 2,820 mm, overall weight: 3,050 kg, rotational speed (max.): 1,480 rpm, Offered are two ball mills, model Cobra 751, from manufacturer Bühler. Both machines come together with a pre-mill (model SRK-690) from the same manufacturer. All machines are in used condition but are fully operational. All machines comply with up-to-date safety standards. Dodpfx Aexldumobujkh An inspection of the machines is possible upon request and by appointment. We are available for any further questions. The stated price is for one pre-mill and one ball mill together, not for all 4 machines!

Condition: used, Year of construction: 1997, Used Netzsch model LME 20 stainless steel horizontal bead mill. Stainless steel jacketed milling chamer has capacity approx. 21,2 litre. Shaft is equipped with (12) griding discs and belt driven by el. motor 18.5 kW, adjustable speed 700 - 1400 rpm. Screen type of milling beads separation. Includes integrated contol panel and switchboard. Djdpfxexlb Hme Abuokh

Condition: used, Year of construction: 1986, functionality: fully functional, Dry-ball mill – including new electric motor Dsdpfx Abexixiysuekh

Year of construction: 1998, condition: used, functionality: fully functional, machine/vehicle number: 10302038, Offered is a 3-roll mill from Bühler AG, year of manufacture 1998, and a press from geiger Maschinenbau AG, year of manufacture 2004. Both machines are in used condition and are currently not in operation. In terms of safety, the machines are up to the latest standards. Both machines are ready for operation. Dkedpfx Aboxb Rc Aeush - 1300 mm roll width - max. 75 kW drive motor An inspection of the machines is possible upon request and by appointment. For further questions, we are at your disposal.