Hosokawa Alpine ACM 15

Hosokawa Alpine ACM 15

Year of construction: 2025, condition: new, Complete compact vertical packaging system including auger dosing unit, screw conveyor and outfeed conveyor. Suitable for powdery products with a high or a low fluidity. The vertical packaging machine (VFFS) is equipped with PLC (control via color touchscreen user interface, different languages available e.g. English, German, etc.), date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air expeller/exhausting device (expels air from the bag before closing – vacuum is not generated), supporting device of finished bags, euro hole punching device, suitable for OPP and PE film (possibly additional costs for the PE unit). - Specifications of VFFS packaging machine: filling range: up to 5000ml; film width: max. 620mm; bag size (mm): min.-max. L(80-400)xW(180-300); max. speed of the machine in neutral: 45 cycles/min; stainless steel 304; 220V, 5kW; 6bar, 0.4m³/min; packaging machine dimensions LxWxH: approx. 1780x1850x1950mm; machine weight: 700kg. The auger dosing unit has a capacity up to 50l (hopper) and following specifications: filling range: 10-5000g; max. speed of the machine in neutral: 40 cycles/min; accuracy: ±0.3~1.5% (depending on product); 380V, 3kW; auger filler dimensions LxWxH: 600x1250x1200mm; weight: 220kg. Screw conveyor for automatic transport of powdery materials to the auger filler. The vibration motor assured an evenly product flow. Capacity of infeed hopper up to 150 l. - Specifications: Hopper, conveyor length and angle can be customized to meet individual customer requirements. Total dimension depends on it. Length of conveyor: 3~4m; stainless steel 304; conveying speed: : 3.0m³/h - 12.0m³/h; 380V, 0.8kW-4.1kW; weight: 130kg – 270kg. Deviations from specifications are possible. Supporting pole optional. The outfeed conveyor has a stainless steel 304 frame. - Specifications: conveying speed 30m/min; 220V, 0.55kW; conveyor dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Total dimensions of complete system approximately L2980xW3650xH2600mm, depending on final layout. Generally the system has to be customized to meet individual customer/product requirements. Therefore deviations of shown specifications of modules and machines are possible. Main components: Color touchscreen SIEMENS, PLC controller SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, film pulling motor SIEMENS. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Rjdpfev Nmk Ajx Abujch

Condition: used, The used Coperion K-Tron K-ML-FB-130QC gravimetric dry solids feeder is a high-precision dosing system with a differential belt scale, manufactured in stainless steel. The unit combines continuous and particularly gentle product conveying via a dosing belt with precise gravimetric control, enabling uniform and controlled dosing of bulk materials Name: Powder Feeder Manufacturer: K-Tron / Coperion GmbH Type: K-ML-FB-130QC Year built: Unknown Condition: Used Price: On demand -Hopper capacity: Storage hopper with an approximate capacity of 75 liters -Drive power: Main drive for the dosing belt and material feed powered by a 0.25 kW electric motor. Vertical agitator with an independent 0.25 kW drive -Agitator speed: Low operating speed of 5.6 rpm for particularly gentle product handling -Weighing technology: High-precision SFT (smart force transducer) load cell technology for accurate gravimetric control and precise dosing. -Material: Hopper and product-contact components manufactured from robust stainless steel -Dosing belt: Polyester fabric belt with a polyurethane coating, designed for easy cleaning. The support structure can be completely removed for cleaning and maintenance purposes Rcsdpfxoiv Ic Eo Abujh -Dimensions: Length: 800 mm x Width: 700 mm x Height: 1.200 mm -Empty weight: Approx. 100 kg

Year of construction: 2021, condition: new, Hosokawa Alpine Mikropul ACM and ZPS spare parts for your mills ACM 2 - ACM 150 or ZPS 100 to ZPS 630. Other manufacture or types on request. We are able to deliver spare parts like: Classifier wheels, Liner, complete Bearing Assembly ( new or overhaul ), hammer with carbide face, shroud ring Rcjdpjgn Edljfx Abush

Condition: new, Year of construction: 2024, functionality: fully functional, nominal power: 90 kW (122.37 HP), rotational speed (max.): 5,760 rpm, rotational speed (min.): 1,592 rpm, total height: 3,437 mm, total length: 3,275 mm, total width: 2,500 mm, type of cooling: air, compressed air connection: 6 bar, Equipment: rotational speed infinitely variable, The impact mills of the REKORD 212-630 series in the welded housing design are robust universal mills for demanding industrial applications in continuous operation. ● Size: 630 mm (nominal rotor diameter) ● Mill housing: Heavy-duty welded stainless steel housing, pressure surge resistant up to 10 bar (AISI316L), with product-contacting surface finish Ra ≤ 1.6 μm for easy cleaning, equipped with a pivoting door and safety interlock type HAAKE (key transfer system); monitoring of housing and bearing temperature, vibration monitoring ● Mill inlet: JACOB pipe; DN 150 mm ● Mill outlet: Ground material and air discharge downward into a suction hopper, optimized for connection to the conveying line to the total separator ● Mill drive: Belt drive, three-phase motor, energy efficiency class IE3 (manufacturer SIEMENS), 90 kW, 3~ 400 V, IP55; suitable for operation with frequency inverter ● Sealing materials: Silicone; PTFE, sealing material conforms to EU and FDA food hygiene standards ● Grinding elements: Pin rotor: 4 pin rows, pin Ø 7 mm (wear-reduced); Pin stator: 3 pin rows without external pin circle, pin Ø 7 mm ● Bearings: Designed for toughest operational demands in continuous industrial service, heavy-duty bearing housings with temperature and vibration monitoring (early detection of potential bearing failure and avoidance of hot surfaces) ● Inert gas supply/monitoring for shaft seal on product chamber side ● Run monitoring to detect operating faults ● Machine frame: The complete unit – mill, drive with motor, tensioning rails, belt drive, and belt guard – is installed ready for use on a sturdy machine frame with height-adjustable machine feet Main components of the offered system include: ● Product feed/transfer from customer’s upstream process and transfer to a rotary valve (certified ATEX protection system); ● Industrial pin mill type REKORD 630-SSt with welded housing and ground surfaces; ● Product separator with discharge rotary valve (certified ATEX protection system); ● Pneumatic conveying line with air inlet/outlet, including suction blower; Rcsdpfx Abex Ac Rbjujh ● WITHOUT control system, without frequency inverter

Condition: good (used), 210131 VARIO 2.2 surface filter, with switching and control unit installed at the factory. Price: on request + VAT (condition as shown in the photo). Motor power: 7.5 kW, 400 V, 50 Hz. Airflow: approx. 4,000 m³/h. Disposal: 2 x 30 L disposable containers. Subject to prior sale! Rcedpjrzrimjfx Abuoh

Condition: good (used), We have 2 granulators / shredding mills for sale (the listed price applies to mill no. 2). The machines were used for cutting and shredding plastic, but they can also be used for processing other plastic materials. Both machines are adapted for liquid cooling. -Technical Data (Mill No. 1, square base): Dimensions: 150 x 115 cm / Height: 210 cm Rotor diameter: 36 cm Rotor/blade width: 55 cm Number of blades: 3 (The fixed blades are positioned diagonally; thanks to this configuration, resistance during cutting and shredding is significantly reduced, making the machine's operation much more efficient). Inlet (feed opening): 30 x 53 cm Motor: 22 kW / 30 HP Adapted for liquid cooling ----- -Technical Data (Mill No. 2, inclined/pyramid base): Dimensions: 150 x 125 cm / Height: 180 cm Rotor diameter: 25 cm Rotor/blade width: 52 cm Number of blades: 3 Motor: 22 kW / 30 HP Rcjdpeuw Skhsfx Abujh Adapted for liquid cooling

Year of construction: 1997, condition: used, Multi-tool milling unit with pneumatic transfer. Manufacturer: Forplex Model : FNG3 Redpfx Abjzfwvwouoch Type: Hammer/pin mill Year: 1997 (2021: full manufacturer retrofit: mechanical, electrical, etc.) Available milling tools: - Pin plate set (rotor / stator) - Hammer plate + sieve ring assembly - Blade plate + sieve ring assembly Capacity : 100 à 3000 kg/h Motor power : 45 kW Door opening safety Pneumatic transfer outlet under the mill Rotor diameter : Ø 440 mm Grid diameter : Ø 450 mm Donaldson Dalamatic DLMV 25/12 filter - Year: 1997 (2021: refurbished by Forplex) - Materials: stainless steel - Filter type: bag filters - Cleaning system: pneumatic - Hopper under filter - Air flow, fan : 7.5 kW - Rotary valve Electrical cabinet - Touchscreen HMI for controlling the entire unit - management of the milling unit - safety management - recipe management - variable-speed drive on the mill motor. Mill dimensions : 225 x 113 x 285 cm Weight : 500 kg

Condition: good (used), functionality: fully functional, machine/vehicle number: C7154, Powtek - gericke rotary sieve housing: steel rotor: steel inlet: stainless steel Ø300mm Rjdpfx Asvz Smmsbujch outlet: stainless steel Ø300mm transition sieve deck: nylon sieve deck 2mm coarse outlet: adjustable

Condition: used, Technical details: Rcedpsu Tr T Ejfx Abush voltage: 380 V / Hz weight: ca. 0,43 t dimensions L x W x H: 1,1 x 0,8 x 1,7 m Stationary welded steel construction Type 80 mm steel profile Application: Separation of mineral materials (sand) according to grain size operation by vibration 3x attachments Ø 610mm 1x separation pipe Ø 100mm attachment feeding screen Ø 580mm grain size 2mm Additional Separator attachment 5.5mm; 4.0mm and 3.5mm sieve inserts are optionally available for 150.00 Euro per sieve. *

Condition: reconditioned (used), pressure: 2 bar, temperature: 133 °C, power: 45 kW (61.18 HP), type of input current: three-phase, input voltage: 400 V, usable tank capacity: 125 l, rotational speed (max.): 82 rpm, rotational speed (min.): 19 rpm, Used Symex CML125 vacuum homogenizer mixer in pharma design, factory overhauled with new seals. Complete process unit for mixing, dispersing, homogenizing, emulsifying, heating, cooling and vacuum – ideal for creams, ointments, gels and pastes in pharma, cosmetics and food. EQUIPMENT • Scraper agitator with PTFE scrapers and 2 baffles, for products up to approx. 100,000 mPas • Bottom homogenizer Symex HFDA 250, forward/reverse, double mechanical seal SiC/SiC • Large and small recirculation DN50, direct powder and liquid suction • CIP with rotating spray heads (Toftejorg), hydraulic lid lift • Liquid ring vacuum pump, temperature control unit (steam / cooling water) • Siemens S7-300 with touch panel, batch control, trend recording • Documentation incl. manuals, wiring diagrams, test certificates; PED / AD2000 SERVICE Rcjdpfx Absyf N H Aouoh • Turn-key installation and commissioning available, optional IQ/OQ • 12 months warranty (excluding wear parts) Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.