Sollau CZ, s.r.o.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total length: 6,500 mm, overall weight: 18,000 kg, rotor length: 1,700 mm, Crushing plant, twin-shaft shredder, slow-speed model, Drive: electro-hydraulic, electric motor 200 kW, Hydraulic unit with control cabinet and operator panel, 2 brand-new rotor shaft bearings and labyrinth seals on the drive side. Discharge conveyor belt recently replaced. Lrodpfxezv U Ifo Afwsr

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO PRO Serie is a mobile type closed circuit crushing plant that is suitable for especially limestone and other types of stones with hardness level is soft or medium. MAIN FEATURES: * Closed circuit crushing till to get desired size of product * Capacity is variable according the material feed and final product dimensions to be crushed. * All equipments are assembled on single special heavy duty construction chassis, transportable by 1 truck. * Conveyors are foldable * Up to 3 different sizes of aggregates * Since the whole plant is built in one chassis, it has the advantage of the fastest production line * PRO Serie Mobile Crusher Plant can be used by single operator, feed can be done by truck, loader or excavator * Plant can be installed in 2 days with its special heavy duty construction chassis * With its multifunctional primary impact crusher, plant can crush different product sizes with high capacity Ledpfxozvxqws Afwjrr * It is equipped with 3 axle, air-controlled brake system and signaling system. * Hydraulic system is controlled by remote system * All motors are under protection with metal sheet covers * The dust suppression control system prevents dusting by conveying high pressure water. * Mobile system has complete fully automation system. Also the plant can be controlled by using tablet with single staff. PRO 90 CRUSHING AND SCREENING PLANT -Bunker: 20 m3 -Plant Dimensions: 16870x4552x4627 mm -Production Capacity: 90-130 Tons Per Hour -Crusher Type & Rotor Size: Turbo Impact – 1100x900 mm -Maximum Feeding Size: 500 mm -Vibrating Screen Size and Deck: 1400x4000 mm 3-4 decks -Total Motor Power: 196 Kw -Generator Capacity: 400 kvA → PRO 90 IS A COMBINATION OF : • Bunker • Vibrating Feeder • Turbo Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 2,000 mm, total width: 1,100 mm, total length: 1,900 mm, overall weight: 980 kg, rotor diameter: 260 mm, type of input current: three-phase, rotor length: 600 mm, sieve perforation: 10 mm, input voltage: 380 V, The PC-800,PC-600 and PC-400 Plastic Crusher is a heavy-duty rotor knife granulator designed for efficient recycling of thermoplastic waste and production scrap. Built for continuous industrial operation, it delivers high performance while producing uniform plastic regrind suitable for immediate reuse in the manufacturing process. The crusher is capable of processing a wide range of materials, including LDPE, HDPE, PVC, PP, PET, PS, PA (Nylon), engineering plastics, rubber waste, and non-abrasive thermosetting materials Technical Specifications Ljdpfx Afszvmy Tjworr Model: PC-600 • Rotor diameter: 260 mm • Rotor knives: 18 moving knives • Stationary knives: 4 knives • Capacity: 100–250 kg/h • Motor power: 15 kW • Power supply: 380 V, 3-phase, 50 Hz • Feed opening: 320 × 620 mm • Screen hole size: 10 mm • Rotor speed: 885 rpm • Maximum material wall thickness: up to 10 mm • Machine dimensions (L × W × H): 1900 × 1100 × 2000 mm

Condition: new, Year of construction: 2026, functionality: fully functional, TECHNICAL SPECIFICATIONS: -Production Capacity: 150-200 Tons Per Hour -Crusher Type & Size: Turbo Impact Crusher – 1200x1000mm -Maximum Feeding Size: 600mm -Total Motor Power: 220 kW MIC-100 is a combination of: Lodpfx Afjzvft Sowsrr • Bunker • Vibrating Grizzly Feeder(Bypass) • Turbo Impact Crusher • Folding type bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: ready for operation (used), functionality: fully functional, Equipment: documentation/manual, E-scrap processing plant with hammer mill, magnet, and re-separation system Feed conveyor Erdwich HA800 hammer mill Lsdsztp D Aepfx Afwjrr Soundproof enclosure Knock-off belt THM Overband magnet ERIES Elevator belt Vibrating feeder for re-separation Re-separator IMRO Frames Control cabinet Additional rotor for hammer mill, in new condition Additional spare parts for hammer mill

Condition: good (used), Year of construction: 2018, Recycling technology, agglomerator, high-performance mechanical dryer, dry cleaner, plastic recycling machine, drying system -Handover: in its current condition as inspected -Condition/Scope of delivery: untested, as shown in the pictures -Manufacturer: WIPA, Dry Cleaner Mechanical High-Performance Dryer -Type: MD 1250-3000/90/0.75/3R -Drive motor: 90 kW -Drum length: 1800 mm Lrodsztnduepfx Afwsr -Sieve: Perforation Ø 5 mm -Dimensions: Dryer 4475/2140/H2630 mm / Control cabinet 1200/660/H2195 mm -Weight: 8400 kg / 340 kg

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 2,500 kg, opening width: 1,400 mm, extraction nozzle diameter: 200 mm, power: 37 kW (50.31 HP), We are offering this used Gross GZ40 shredding plant, manufactured in 2021. Four-shaft shredder GZ 40 Feed opening: 1,400 x 1,300 mm Throughput capacity: material and screen dependent Disc diameter: 280 mm Cutting head: 700 x 760 mm Number of cutting shafts: 2 Number of cutting discs: 38 Number of clearing shafts: 2 Number of clearing discs: 38 Motor power: 2 x 18.5 kW Screen size: without screen Suction nozzle: 200 mm Weight: approx. 2,500 kg Machine with hopper, control cabinet Lrsdpszr Rvdjfx Afwjr Year of manufacture: 2021 If you have any questions or require further information, please send us a message or call us.

Condition: new, Year of construction: 2026, functionality: fully functional, TECHNICAL SPECIFICATIONS: -Production Capacity: 150-200 Tons Per Hour -Crusher Type & Size: Turbo Impact Crusher – 1200x1000mm -Maximum Feeding Size: 600mm -Total Motor Power: 220 kW MIC-100 is a combination of: • Bunker • Vibrating Grizzly Feeder(Bypass) • Turbo Impact Crusher • Folding type bypass and stock conveyor belts Lrsdpfjzrlw Njx Afwsr • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: ready for operation (used), Manufacturer: H&G Model: HG/SV 11 Weight: 1800 kg Ledpozp Ipiofx Afwjrr Engine power: 11 kW

Condition: ready for operation (used), Manufacturer: H&G Lrodpfx Afozp Ilqjwor Model: HG/SV 11 Weight: 1800 kg Engine power: 11 kW

Condition: excellent (used), Year of construction: 2021, operating hours: 4,689 h, functionality: fully functional, machine/vehicle number: 103, overall weight: 32,000 kg, power: 390 kW (530.25 HP), conveyor belt speed: 2,000 mm/s, fuel tank capacity: 950 l, The machine is equipped with a new roller! The following work was carried out on the machine: Machine washed and cleaned Roller disassembled and bearing shield separated from the roller Rack, limiter, and comb attachments disassembled Cooling and air intake system, front door, and soundproofing register disassembled and reassembled Roofs disassembled and reassembled Various brackets repaired and re-welded Oil pan replaced Exhaust system completed Openings in the housing retrofitted with labyrinth sealing New tools mounted on the drum and rack Roller mounted Cable harnesses repaired TECHNICAL DETAILS Type: Size L-C3 VARIOMAT Roller teeth: 42 pieces Limiter: Size L, 20 pieces Roller: New Loading height: 3,307 mm Loading protection: On both sides Longitudinal belt length: 4,450 mm Longitudinal belt width: 1,000 mm Rear belt length: 8,500 mm Rear belt width: 1,200 mm Discharge height: 5,050 mm Conveyor speed: 2 m/s MACHINE DETAILS Engine type: Diesel-hydraulic Engine: MTU 6R1300 Rated power: 390 kW Engine speed: 1,700 rpm Emission standard: EU Stage V Fuel tank: 950 l Additional hydraulic connection: 30 l/min Additional hydraulic connection: 70 l/min Roller drive: 380 kW Drive system: VARIO Hydraulic system: Load-Sensing system Operating hours: 4,689 h Chassis: 3-axle semi-trailer chassis unit Drive: Hydraulic Dimensions & Weight Dimensions in working position (L x W x H): 16,786 x 2,500 x 5,050 mm Dimensions in transport (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Operating hours: 4,689 h EQUIPMENT Basic package Inventhor Type 9 Additional hydraulic connection 30 l/min and 70 l/min Lodeznmpxepfx Afwjrr Roller drive via planetary gear 380 kW Load-Sensing system Radio remote control, complete Large side GRP maintenance doors easy-to-maintain engine compartment with LED light hydraulically reversible fan wheel loading protection on both sides Fire extinguisher Maintenance ladder Toolbox acoustic start-up warning Doppstadt telematics system 3-axle semi-trailer chassis unit Shredding system Size "L-C3"-VARIOMAT Size "L" - "Limiter" (20 pieces) hydraulic drive Watering on both sides Rear belt 8.5 m, 1,200 mm wide Overbelt magnet neodymium Frame for overbelt magnet neodymium Central lubrication with pump LED lighting package engine compartment and rear Note: The Doppbasket system can be retrofitted for an additional cost.

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,100 kg, rotor diameter: 700 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,400 rpm, power: 90 kW (122.37 HP), Equipment: rotational speed infinitely variable, This shredding machine is exceptional and highly innovative. The material to be processed is shredded particle by particle in 6 rows of small chambers, while simultaneously the particles are flung against the grinding surface. The combined effect results in a very fine grain size – and it is possible to dry the material being shredded at the same time. Keywords: Turbo mill, impact mill, eddy current mill. Depending on the material, the machine can shred to a particle size of less than 1000 µm to 5 µm. The throughput rate is between 100 and 900 kg/h, depending on the material. The applications range from minerals, industrial products, powder coatings, chemicals, dyes to food and feed. The innovations of the machine are: • the plug-in connections for the wear tools (always in the same place with minimal tolerances) • rotation in both directions – this ensures that the tools are worn down evenly on both sides • conical design – allows the cutting gap to be adjusted precisely to 0.1 mm with only 12 screws. Lsdpfozl Shzjx Afworr Technical data: • Drive power 90 kW – frequency converter (FU) is essential – frame size 90 kW with 150% overload for 60 seconds. • Speed up to 125 m/s • Tools: Rotor and stator made of hard metal, available in various degrees of hardness; ceramics are also possible. • Machine monitoring via bearing temperature measurement and vibration measurement included. • Control panel is not included. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe.

Condition: excellent (used), Year of construction: 2019, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: R1253899, overall weight: 2,200 kg, rotor diameter: 500 mm, rotor width: 840 mm, type of input current: three-phase, A very robust cutting mill Machine data: 2200 kg; 1478/562 RPM, 45 kW Rotor 500x840 mm, 5 rows of rotor knives, 4 rows of stator knives Cast iron rotor, inlet 340x150 mm, Sieves with 3-2.5-1 mm 4 rows of hammers with 5 hammers each The delivery scope also includes: Alpine Classifier MZM 160x500, fan 7.5 kW, rotary valve, some piping A control cabinet is not available and must be built by the buyer. Ledpfxozl E Ste Afwjrr The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price is quoted excluding packaging on a pallet.

Condition: excellent (used), Year of construction: 2013, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: R1203433 Pos 1000, overall weight: 365 kg, rotor diameter: 400 mm, rotor width: 320 mm, opening width: 340 mm, input voltage: 400 V, power: 22 kW (29.91 HP), A very robust hammer mill from Alpine with grate bars for crushing soft to medium-hard materials. The mill is supplied with an inlet hopper and a device for pneumatic extraction. A control panel is not included. Machine data: Lodpfezl E N Eox Afworr 365 kg; 2800 RPM, 22 kW Rotor 400x320 mm, cast iron rotor, inlet 340x150 mm, Design with grate bars 4 rows of hammers, 5 hammers per row The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: used, Year of construction: 2016, The shredder breaks down large, bulky pieces of Styrofoam, EPS, and similar materials with a maximum bulk density of 30 kg/m³ into small pieces. The shredder reduces the volume by approximately 65%. This makes the machine ideally suited for use in industrial and craft businesses as well as for wholesale and retail trade of packaging materials made of Styrofoam. Depending on the screen set, simply shredding your Styrofoam waste achieves a volume reduction of 3:1. Custom-made solutions are available upon request. VAT is stated separately on the invoice. Shipping is included throughout Germany, with an extra charge for island deliveries. If you have any questions, please feel free to contact us. Lodpfx Afszlh Taswsrr

Condition: new, Year of construction: 2026, functionality: fully functional, power: 365 kW (496.26 HP), *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MTK Series are mobile type & closed circuit crushing and screening plant known as also sand making machine that is used for high percentage of cubical shape sand production purpose by processing soft and medium hard materials such as limestone, gypsum etc. MTK Series includes one stage of crushing process that is made by a tertiary impact crusher which is capable to produce high percentage of sand with good cubical shape. TECHNICAL SPECIFICATIONS: -Bunker: 10 m3 -Plant Dimensions: 17000x4500x3900 mm -Production Capacity: 200-300 Tons Per Hour -Crusher Type & Rotor Size: Tertiary Impact Crusher – 1200x1300 mm -Maximum Feeding Size: 120 mm -Vibrating Screen Size and Deck: 2000x5000 mm 3 decks -Total Motor Power: 365 Kw -Generator (optional): 500 kvA MTK-130 IS A COMBINATION OF: • Hopper • Vibrating Feeder • Tertiary Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts Lrjdjzhkanjpfx Afwer • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 22428, total height: 4,000 mm, total width: 2,500 mm, total length: 13,000 mm, overall weight: 11,000 kg, rotor diameter: 600 mm, rotor width: 1,000 mm, type of input current: AC, opening width: 1,000 mm, rotor length: 1,000 mm, sieve perforation: 8 mm, power: 150 kW (203.94 HP), Herbold SM 600/1000 - S7-2 Recycling Plant, complete – Year of manufacture 1999 – Ready for immediate use For sale is a fully equipped and operational recycling plant based on a Herbold SM 60/100 shredder, manufactured in 1999. This is a complete production line, from the feed hopper to the filled end product. The plant is ready for operation, runs reliably, and can be demonstrated in operation after prior arrangement. The plant is mounted on a semi-trailer and can be used flexibly at different locations. The integrated 340 kVA generator enables autonomous operation. The plant was specifically designed for the processing of plastic materials and features an enlarged material inlet, which is particularly suitable for feeding in crates and large-volume plastic parts. For export or stationary installation, the plant can be disassembled after prior arrangement. Preparation for container or sea transport is possible. Equipment: Herbold SM 60/100 shredder Year of manufacture 1999 Generator 340 kVA Lredpfx Aezfxqvefwjr Conveyor system Filling system Dust extraction system Demetallization / metal separator Complete plant, ready for immediate use Condition: Functional and in regular use Good technical condition Extensive spare parts stock included Several spare conveyor belts Conveyor fan Spare motors Set of spare blades Deflector wedge Other wear and spare parts Immediately available upon agreement Advantages: Complete line from a single source Autonomous operation possible through generator Suitable for recycling companies, plastic processors and export If you are interested, please contact us by phone or message. Inspection and demonstration are possible after prior arrangement.

Condition: refurbished (used), Year of construction: 1988, TECHNICAL DATA: Jaw opening 200 x 620 mm Year of manufacture 1988 Throughput capacity - 80 t/h Feed material size 4-70 mm Weight 6081 kg Power requirement 90 - 132 kW Special features: Adjustable grinding plates Condition: Refurbished, wear parts replaced, sandblasted, primed, and painted Lrodpfozc H Rasx Afwsr Optional and upon request: Infeed hopper, discharge hopper, motor, frame, V-belt, belt guard, control cabinet with soft starter or frequency inverter, special paint finishes, hydraulic opening mechanism

Condition: used, Year of construction: 2012, overall weight: 120 kg, TECHNICAL DATA: Jaw opening 100 x 60 mm Max. feed size 90 x 50 x 60 mm Adjustable jaw gap 3 - 10 mm Throughput capacity - 850 kg/h Crusher speed 400 rpm Weight 120 kg Power requirement 1.1 kW / 1500 rpm Dimensions L*W*H 690 x 322 x 445 mm Price upon request The machine is supplied with frame, 1.1 kW motor, belt guard, and material loading device. TECHNICAL DATA: Jaw opening 100 x 60 mm Max. feed size 80 x 40 x 50 mm Jaw gap adjustment 3 - 10 mm Lredpszc H Nvofx Afwer Throughput capacity - 650 kg/h rpm 400 rpm Weight 120 kg Power 1.1 kW / 1500 rpm Size 690 x 322 x 445 mm Price on request With motor and frame. The crusher is mounted on a small base frame, consisting of sheet metal, together with the electric motor, V-belts, and belt guard. There is a discharge opening for the crushed material, and if the discharge opening is removed, the material can pass through.

Condition: new, functionality: fully functional, overall weight: 6,450 kg, Price on request. Technical data: Feed opening: 1000 x 250 mm Max. recommended feed size: 210 mm edge length Gap adjustable from: 15 - 50 mm Estimated throughput: 15 - 60 t/h Weight: 6450 kg Crusher rotation: 330 rpm Power consumption: 37 kW / 980 rpm Dimensions L x W x H: 1530 x 1992 x 1380 mm Delivery time: ex stock Redlham (subject to presale) Lsdpezc H I Sjfx Afwerr

Condition: used, Year of construction: 1985, functionality: fully functional, overall weight: 6,200 kg, power: 30 kW (40.79 HP), The machine has seen little use and is still in very good condition! Lrodszc Htbspfx Afwer

Condition: used, Year of construction: 1980, functionality: unexamined, total height: 2,000 mm, total width: 2,200 mm, total length: 2,900 mm, overall weight: 1,020 kg, opening width: 305 mm, rotational speed (max.): 350 rpm, rotational speed (min.): 300 rpm, working width: 2,100 mm, Price on request Lredpezc Hgbofx Afwjr

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, power: 132 kW (179.47 HP), Price available upon request. The machine is in operational condition. Ljdpfx Afszc E Hyewsrr

Condition: good (used), Pearl mill, agitator mill, shredder, crusher, grinding mill, counter blade, crushing blade, counter cutter -Counter blade: Length 640 mm -Hole spacing: 173 mm / bore Ø 22 mm -Number: 3 knives available -Price: per piece -Dimensions: 640/150/29 mm Lrjdpfx Afezcu Duewsr -Weight: 21.3 kg/pc.

Condition: excellent (used), functionality: fully functional, Used Sandvik CV217 VSI Crusher Year 2012 Ledpfxey Swimj Afworr All New Wear Parts Shotblasted and Painted 185kW Electric Motor Complete With Electric Control Panel Complete With Support Legs Approx Weight 9,5000 Kgs Excellent Condition