Xeronext Ltd.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 4,310 h,

Condition: used, functionality: fully functional, mileage: 227,123 km, first registration: 05/2012, Year of construction: 2012, operating hours: 6,314 h, ASTRA HD9 84.48-80 with CIFA concrete mixer First registration 31/05/2012 – Euro 5 Km 227123 Hours 6314 4 axles CIFA SRY1300 superstructure – Auxiliary engine Tyres 40/50% Valid roadworthiness inspection Good condition (mixer drum needs attention) Lodpfox Nqchjx Ah Uoak Available immediately We consider trade-ins of vehicles of all brands: MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, with CIFA, SERMAC, PUTZMEISTER equipment, or earthmoving machinery: CATERPILLAR, FIAT HITACHI, KOMATSU.

Condition: used, functionality: fully functional, mileage: 238,370 km, Year of construction: 2005, operating hours: 21,180 h, IVECO MAGIRUS 440E EUROTRAKKER with C & B DUE concrete mixer First registration: 07/09/2005 - Euro 3 Km: 238370 Operating hours: 21180 Axles: 4 Equipment: C & B DUE 17.5 m3 - PTO Tyres: 50/60% Valid inspection Good condition Available immediately WE CONSIDER TRADE-INS OF VEHICLES OF ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT, OR EARTHMOVING MACHINERY CATERPILLAR, FIAT HITACHI, KOMATSU Lajdjx Nqcbspfx Ah Uok

Condition: used, functionality: fully functional, mileage: 234,512 km, first registration: 05/2010, Year of construction: 2010, MERCEDES BENZ 4141 B with CIFA concrete mixer Laodpfx Asx Nqb Roh Usk Registration 03-05-2010 - Euro 4 Km 234,512 4 axles CIFA RY1300 body – PTO (power take-off) Tyres 30/40% Good condition Immediately available WE CONSIDER TRADE-INS OF VEHICLES OF ALL BRANDS: MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, WITH EQUIPMENT BY CIFA, SERMAC, PUTZMEISTER; OR EARTHMOVING MACHINERY BY CATERPILLAR, FIAT HITACHI, KOMATSU

Condition: used, Year of construction: 2021, functionality: fully functional, Blanking station, Centerline, Non-Stop, micrometer adjustment, electronic double sheet control, sheet marking device, vacuum feeder belts, pull mark left, push mark right, machine hours approx. 8 million die cuts, 1 die frame with quick-change frame top/bottom in the blanking station, raised design, max. machine speed 8,000 sheets/hour, max. die-cutting pressure 260 tons, processable materials: paper min. 90g/m², cardboard / solid board max. 2,000g/m², corrugated board up to 4 mm. max. 760 x 1060 mm Laodpfx Aox Nqaaeh Usk min. 300 x 350 mm Other: The machine can be inspected in operation by arrangement.

Condition: good (used), Offered is a VDF 48S Boehringer lead and feed screw lathe with accessories, in good condition. Manufacturer: VDF Boehringer Göppingen Type: 48S Machine No.: 70.1025.002302 Year of manufacture: approx. 1972 Centre height: 232 mm Centre distance: 1600 mm Swing over bed: 485 mm Swing over cross slide: 280 mm Spindle bore: 52 mm Spindle speeds: 11.2 - 2240 rpm Total power requirement: 7.5 kW Machine dimensions (L x W x H): approx. 3.35 x 1.10 x 1.40 m Weight: approx. 2,500 kg Lajdox Np U Nopfx Ah Usk

Condition: used, Upper driven head with Y axis, lower driven head, twin spindles. Max. swing over bed: 300 mm. Max. swing over support: 230 mm. Max. swing over bed with upper head: 230 mm. Max. swing over bed with lower head: 230 mm. Max. turning length: 600 mm. Max. distance between the face of the right and left spindle: 980 mm. Milling range outside the turning axis via Y axis: 100 mm (+/-50 mm). Max. turned bar diameter (left spindle): 65 mm. Max. turned bar diameter (right spindle): 65 mm. Max. permissible workpiece weight without counter spindle (including chuck weight = 23 kg): 12 kg. Total weight: 7800 kg. Accessories: Feeder SS 2500, length 200-1525 mm. Ljdpfxex Np U As Ah Uoak

Condition: used, Charging Box Area: Dimensions: 72" Long x 30" Wide x 19" Deep Bale Size: Maximum: 12" x 6" x 15" Minimum: 12" x 6" x 4" Average: 12" x 6" x 6" Bale Weight: Aluminum: 20-60 lbs. Stainless Steel: 20-50 lbs. Copper: 60-120 lbs. Brass: 50-100 lbs. Total Average: 50 lbs. Laedpjx Np Uvofx Ah Ujk Machine Cycle Time (Exclusive of Loading Hopper): Cycle Time: 25 seconds Approximate Production Capacity (With Average Bale Weight 50 lbs): Capacity: Up to 1,152 bales (57,600 lbs or 28.8 tons) Based on an 8-hour shift and depending on loading conditions and operator. Compression Door: Total Force: 15.7 tons 1st Squeeze (Main Ram): Total Force: 48.1 tons Side Squeeze (Final Compression): Total Force: 79.5 tons Vickers Power Unit: Oil Reservoir Capacity: 275 gallons Motor: 1-30 HP 3/60/220/440 Equipped With: Skip pan and bale ejector Dimensions: Overall Dimensions: 8'9" wide plus skip pan x 15'6" long x 5' high Approximate Weight: 18,000 lbs

Condition: used, functionality: fully functional, mileage: 222,181 km, first registration: 01/2018, ASTRA HD9 84.50-80 with CIFA concrete mixer First registration January 2018 - Euro 6 222,181 km 4 axles CIFA RY1300 equipment - PTO Tyres 50/60% Good condition Lasdpfx Aox Np Txeh Uok Immediately available WE CONSIDER TRADE-INS OF VEHICLES OF ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINES CATERPILLAR, FIAT HITACHI, KOMATSU

Condition: used, mileage: 212,012 km, first registration: 01/2015, Year of construction: 2015, ASTRA HD9 84.48-80 with CIFA concrete mixer Lasdpfxjx Np Tro Ah Ujk Registration 06-01-2015 - Euro 5 Km 212012 4 axles CIFA RY1300 equipment – PTO Tyres 50/60% Valid inspection Good condition Immediately available WE CONSIDER TRADE-INS OF VEHICLES OF ALL MAKES, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY (CATERPILLAR, FIAT HITACHI, KOMATSU)

Condition: used, functionality: fully functional, mileage: 327,190 km, Year of construction: 2016, operating hours: 14,576 h, IVECO TRAKKER 450 with SIME concrete mixer Registration: 31/10/2016 – Euro 6 327,190 km 14,576 operating hours Laedpfx Ahex Np Tls Uok 4 axles SIME T1200 equipment – Auxiliary engine Tyres 70/80% Valid inspection Good condition Available immediately WE CONSIDER PART EXCHANGES FOR VEHICLES OF ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY CATERPILLAR, FIAT HITACHI, KOMATSU

Condition: used, functionality: fully functional, mileage: 453,780 km, first registration: 10/2025, Year of construction: 2001, operating hours: 18,779 h, SCANIA CV R 124 CB 8X4 HZ 420 with SIME concrete mixer Registration: 16/03/2001 - Euro 2 Km: 453780 Operating hours: 18779 4 axles SIME T1200 bodywork – Auxiliary engine (equipment year 2005) Tyres: 60/70% Laodpfx Aex Np Tfjh Ujk Good condition Immediately available WE CONSIDER TRADE-INS OF VEHICLES OF ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, KOMATSU

Condition: used, axle configuration: 3 axles, first registration: 04/2001, total length: 13,890 mm, total width: 2,550 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 9,110 mm, Year of construction: 2001, Equipment: ABS, = Additional options and accessories = - EBS - Toolbox = Further information = Axle configuration Tyre size: 385/65R22.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg Ljdpfxsx Np S Us Ah Usak Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Unladen weight: 6,600 kg Payload: 32,400 kg Gross vehicle weight (GVW): 39,000 kg Identification License plate: OG-32-PH

Condition: used, empty load weight: 6,200 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2013, next inspection (TÜV): 04/2026, loading space length: 7,300 mm, loading space width: 2,354 mm, loading space height: 1,460 mm, loading space volume: 24 m³, tire size: 385/65 R22,5, wheelbase: 1,310 mm, color: grey, Equipment: ABS, disc brake EBS payload 32,800 kg Ledpjx Np S Iofx Ah Uoak air-lift suspension floor 5 mm + wall 4 mm fifth wheel height 1,380 mm lifting and lowering device slide tarpaulin + platform foldable underrun protection automatic lowering when tipping subject to errors and changes

Condition: ready for operation (used), Year of construction: 2006, Built in 2006 Size max 320 x 510 x 70 mm Speed max 15.000 c/h Gatherer 18 stacions ZU 841 - Optical sheet control: SignalLynx - ATC thikness control 1 Reject AS 841 Perfectbinder - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Base for 1st spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Stream cover feeder: SAL 411.C - Scoring station max: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE - Transport system, length (approx) 50 meters - Conveyor tower Ambaflex - Reject unit Three knife trimmer Kolbus HD 152P - counter: 14,367 mio—only!!! - Co-Pilot with touchscreen - Right hand infeed - Counter stacker Lsdpfsx Np Szsx Ah Ueak - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Stacker - Rima Stacker 3310 ( Kolbus XRS 130) - Rima Statik device 110

Condition: used, Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, EQUIPMENT Centerline blanking station Machine elevation 1800 mm Punching plates PM 106 5 mm Blanking station Lsdpfxsx Np She Ah Uoak Non-stop feeder TECHNICAL DETAILS Sheet size: 750 x 1060 mm

Condition: good (used), Year of construction: 2016, operating hours: 33,200 h, TABLE LENGTH mm 3200 X-AXIS TRAVEL mm 2600 Y-AXIS TRAVEL mm 1100 Z-AXIS TRAVEL mm 900 MACHINE DATA SHEET Manufacturer: DMG Mori Model: DMF 260/11 Category: Machining Centres Subcategory: Universal Machining Centres Year of manufacture: 2016 Location: Germany Country of origin: Germany Total power-on hours: 33,200 h Spindle hours: 16,200 h Stock number: 1175 Availability: Immediately Control system: Heidenhain iTNC 530 Spindle speed range: 20 – 8,000 rpm Spindle power: 23.5 / 13.5 kW Through-spindle coolant pressure: 40 bar TABLE SIZE Table length: 3,200 mm Table width: 1,100 mm TRAVEL DISTANCES X-axis travel: 2,600 mm Y-axis travel: 1,100 mm Z-axis travel: 900 mm B-axis rotation: + / – 90° Tool holder type: SK 40 Number of tool stations: 30 Electrical connection: 48 kVA Blum laser tool measurement: Yes Heidenhain TS 649 workpiece probe: Yes Air through spindle: Yes MACHINE DIMENSIONS Laodpox Np Sbofx Ah Usk Width: 7,200 mm Depth: 3,400 mm Height: 3,400 mm Machine weight: 27,000 kg

Condition: good (used), Year of construction: 2025, operating hours: 12,451 h, Liebherr LH 30 M Year of manufacture: 2013 Laodpfx Ajx Np Rweh Uek 12,451 operating hours 31,600 kg dead weight Magnet connection New slewing ring, approximately 50 operating hours!!

Condition: used, functionality: fully functional, mileage: 472,618 km, first registration: 10/2007, Year of construction: 2007, MERCEDES BENZ Actros 4141 B with CIFA concrete mixer First registration: 12-10-2007 – Euro 5 Mileage: 472,618 km 4 axles Fitted with CIFA RY1300 – PTO Tyres: 40/50% Good condition Laedpfxex Np Rqo Ah Uok Valid inspection Immediately available WE CONSIDER TRADE-INS OF VEHICLES OF ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT, OR EARTHMOVING MACHINERY CATERPILLAR, FIAT HITACHI, KOMATSU.

Condition: good (used), axle configuration: 3 axles, first registration: 03/2008, total length: 9,810 mm, total width: 2,480 mm, suspension: air, tire size: 385/55 22,5, wheelbase: 5,220 mm, color: grey, Year of construction: 2008, Axle Configuration Tyre size: 385/55 22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Front axle: Max. axle load: 9,000 kg; Steering; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Weights Unladen weight: 3,820 kg Payload: 23,180 kg Gross vehicle weight (GVW): 27,000 kg Condition Technical condition: very good Visual condition: good Lajdpsx Np N Tofx Ah Uok Damages: none Further information Please contact Jonathan Kooy for further information.

Condition: used, functionality: fully functional, mileage: 440,050 km, first registration: 10/2008, ASTRA HD8 84.48 with CIFA concrete mixer First registration 17/10/2008 - Euro 5 Km: 440,050 Operating hours: 26,247 4 axles CIFA RY1300 equipment - PTO Tyres 70/80% Valid inspection Good condition Laedjx Np N Hspfx Ah Uok Immediately available WE CONSIDER TRADE-INS OF ALL BRANDS OF VEHICLES, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT, OR EARTHMOVING MACHINERY CATERPILLAR, FIAT HITACHI, KOMATSU

Condition: excellent (used), axle configuration: 3 axles, first registration: 12/2024, total length: 78,000 mm, total width: 25,500 mm, total height: 35,800 mm, suspension: air, tire size: 365/65R22,5, wheelbase: 6,040 mm, color: white, Year of construction: 2024, General Information Applications: Construction, Demolition, Earthmoving, Forestry, Horticulture, Internal Logistics, Mining and Parking Management Registration Number: OV-18-FK Axle Configuration Tyre size: 365/65R22.5 Axle brand: Goodyear Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Alloy wheels; Lift axle; Max. axle load: 10,000 kg Rear axle 2: Alloy wheels; Max. axle load: 10,000 kg Rear axle 3: Alloy wheels; Max. axle load: 10,000 kg Weights Unladen weight: 7,420 kg Payload: 34,580 kg Gross vehicle weight: 42,000 kg Functional Laedpfox Np Nysx Ah Uok Tipper: Rear Condition Technical condition: very good Visual condition: very good Product Safety Manufacturer: AJK Nederland Borkel en Schaft, NL Further Information Please contact Maarten van Marion for more information. = Company Information = View our complete range at:

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 2,392 h, * Padfoot roller * Roller width: 2,134 mm * Air conditioning * Galaxy tires 23.1-26 Ljdjx Np Ntopfx Ah Usak * CAT C4.4 engine – Tier 4 – final * Weight: 14,687 kg * CE certified

Condition: used, mileage: 380,244 km, power: 184 kW (250.17 HP), first registration: 01/2012, fuel type: diesel, number of seats: 37, gearing type: automatic, emission class: euro5, color: other, brakes: retarder, total length: 8,390 mm, total height: 3,280 mm, Year of construction: 2012, Equipment: ABS, = Additional Options and Accessories = - Front refrigerator - Webasto heater = Further Information = Lasdpjx Np Nmofx Ah Usk Damage: none = Company Information = We are an international company based in Belgium, near Brussels (approx. 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses and has a large parking area that serves as a display site. We always have a wide range of buses of all makes, capacities, models, and in every price range in stock. We can find the right coach, school, or city bus tailored to your needs and budget. All information provided without guarantee. Errors, prior sale, and typographical mistakes excepted. Opening hours for the inspection of used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Year of construction: 2019, condition: ready for operation (used), overall weight: 1,500 kg, total height: 1,300 mm, This TFM GM-SB-38CNC-2A1S was manufactured in 2019. It features a max bending capacity of 38 × 2 mm, bending speeds up to 65 °/sec, and motor power of 4 kW. Ideal for precise bending with a max bending angle of 180° and effective length over mandrel of 3200 mm. Consider the opportunity to buy this TFM GM-SB-38CNC-2A1S profile bending machine. Contact us for more information. Machine Benefits Technical Machine Benefits • Max. Bending capacity: 38 × 2 mm • Min. Bending radius: 20 mm • Max. Bending radius: 200 mm • Max. Bending angle: 180° • Bending precision: ±0. 1° • Turning angle precision: ±0. 1° • Feeding precision: ±0. 1° • Effective length over mandrel: 3200 mm • Bending speed: 65 °/sec • Turning pipe speed: 180 °/sec Extra Information Feeding speed: 900 mm/sec Motor power of oil system: 4 kW Oil pump flow rate: 17 L/min Max. pressure: 160 kg/cm² Dimensions Machine Depth 4000 mm Lsdex Np Ngepfx Ah Ujak