Used Sorting equipment for sale (67)

Condition: excellent (used), Functionality: fully functional, Year of construction: 2017, Used Hein Lehmann Double Deck Flip Flow Screener Year 2017 Screening Area 6 Metres x 1.2 Metres Double Deck c/w Poly Mats Top & Bottom Deck Complete With Chute and Framework Electric Motor c/w Prop Shaft Dqluab Very Tidy Unit Weighs Approx 11 Tonne

Condition: used, Overview of the equipment of a used sorting plant, year of construction 2009, with a sorting capacity of 25,000 t/year For sale is a complete used sorting plant for deinking paper, which can also be used for other materials. The plant consists of the following components: 1 piece sorting cabin with an integrated office (control room), external dimensions 14,200 x 11,400 x 4,350 / 8,170 mm (l x w x h), with 3 sorting belts and 10 sorting places, air-conditioned (heated). 1 piece ventilation system for the sorting plant with 17,600 m³/hour, manufacturer VTS Ventus, type VS-120-R-H/S 1 piece infeed conveyor belt, right, no. 10, dimensions 7,360 x 1,200 mm, drive power 3 kW 1 piece infeed conveyor belt, centre, no. 11, dimensions 7,360 x 1,200 mm, drive power 3 kW 1 piece infeed conveyor, left, no. 12, dimensions 6,360 x 1,200 mm, drive power 3 kW 1 piece sorting belt, long, right, no. 15, dimensions 8,350 x 1,200 mm, drive power 2.2 kW 1 piece sorting belt, short, right, no. 17, dimensions 4,350 x 1,200 mm, drive power 1.5 kW 1 piece sorting belt, long, centre, no. 14, dimensions 8,350 x 1,200 mm, drive power 2.2 kW 1 piece sorting belt, short, center, no. 16, dimensions 4,350 x 1,200 mm, drive power 1.5 kW 1 piece sorting belt, left, no. 13, dimensions 5,360 x 1,200 mm, drive power 2.2 kW 1 piece reversing belt, below sorting belts 14 and 15, no. 18, dimensions 5,200 x 1,000 mm, drive power 2.2 kW 1 piece discharge belt (short), no. 17, dimensions 4,350 x 1,200 mm, drive power 1.5 kW 1 piece discharge conveyor, no. 23, dimensions 8,300 x 1,000 mm, drive power 3.0 kW Cfwmpmmk8U 1 piece bunker belt BB1 (from Hartner ballistic separator) dimensions 25,400 x 2,000 mm 1 piece bunker belt BB2, dimensions 24,000 x 2,000 mm 1 piece bunker belt BB3, dimensions 24.000 x 2.000 mm 1 piece bunker belt BB4, dimensions 11,000 x 2,000 mm 1 piece long discharge conveyor to the warehouse, No. 22, dimensions 28,200 x 1,000 mm, drive power 9.2 kW Technical data of the ventilation system for the sorting cabin: Manufacturer VTS Ventus, Poland Type VS-120-R-H/S Min. air capacity 5,815 m³/hour Max. Air flow rate 17,610 m³/hour Connected load 108 kW Static pressure 837 Pa Stand-by pressure 600 Pa Filter designation VS 120 B.FLT F5, type EU5 Filter size 592 x 287 mm Remark: The plant is located in Germany, is still fully assembled, connected to electricity and could be inspected in operation (without material input) if required. The sale of the plant takes place ex location, Germany. The dismantling and loading of the entire plant as well as the broom-clean handover of the hall is at the risk and expense of the buyer. Technical documentation for the system and the components is only available in German. An inspection of the plant is possible by arrangement. We do not accept any liability for the technical details or any errors.

Year of construction: 2002, Condition: good (used), Functionality: fully functional, Wagensveld machine and steel construction - sorting cabin Broeckx Plastic Recycling B.V. This sorting cabin was commissioned in 2002 for the manual sorting of industrial plastic waste. - Closed sorting cabin - Feeding belt (slow speed) - Sorting belt (4 speeds) - Waste removal belt Dqm9Aj - 7 sorting bunkers 32.5 m3 - 1 dumping bunker - 12 sorting places

Condition: good (used), READY FOR DELIVERY. LOW PRICE. Bslqqtls7Qy PAPER CARDBOARD SORTING LINE Consisisting of: - steel made step feeder bunker - paper cardboard sorting deck - conveyors - automation system - manuals The line has been dismantled in working condition.

Year of construction: 2011, operating hours: 2,500 h, Condition: good (used), machine/vehicle number: L10022-011, Redox Windsifter/ windsichter Hook container/ hacken lift vibrating feeder moveable separating drum Ujf20Ifv7X 9095 mm total length 2642mm total working width adjustable legs westeria, nihot, walair

Year of construction: 2008, operating hours: 6,350 h, Condition: excellent (used), Fintec 542 tracked screener 2-DECK Cgnutofqik 6350 working hours 2008 year Top deck area 3600x1350 mm Bottom deck area 3000x1350 mm Tipping grid on hopper can be assemble for additional price. 3-way Engine CAT 3054c Weight 28 tons We can arrange shipping to any place in the world Machine in working conditio ready for work

Year of construction: 2007, Condition: excellent (used), Electromagnetic belt separator IFE MEL 1400 length: 3200mm width: 1200mm Year of manufacture: 2007 Hrkglblqqp Protection class of magnetic housing IP65; Magnet power 7.55 kW; Material flow rate 1.8 m/s; Drive power 4 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; cylinder diameter: 500mm Total weight: 6480 kg Adjusting the device belt and tension

Condition: used, Overview of the equipment of a sorting plant, year of construction 2009, extension 2015, with a sorting capacity of 25,000 t/year For sale is a complete sorting plant for deinking paper, which can also be used for other materials. The plant consists of the following components: 1 piece feeding / dosing bunker with hydraulic moving floor and dosing drum, manufacturer Hartner, type Storage HAT 1 piece 3-deck ballistic separator, manufacturer Hartner, type Paper Sort 2 pieces overband magnetic separators, manufacturer IFE, type MEQL 1401 S-PS 2 pieces cascade screens (vibrating screens), manufacturer IFE, type SM 2400 x 5000 F - UW30 Dqj8Gf 2 pieces TiTech Autosort, manufacturer TOMRA Sorting GmbH, type TITECH AutoSort 4 (NIR1-VIS) (S-2800) (X-L), incl. accelerating belts 1 piece sorting cabin with filter system, air-conditioned (heated), with 3 sorting belts and 10 sorting stations 1 piece ventilation system for the sorting plant with 17,600 m³/hour, manufacturer VTS Ventus, type VS-120-R-H/S 5 pieces bunker belts for the storage of the individual sorting fractions 1 piece semi-automatic truck loading station for walking floor or container trucks 1 piece swivel distributor conveyor for stockpiling material as piles 1 piece baling press, 150 t pressing force, manufacturer Europress, type EP5 150 V5 Miscellaneous conveyor technology consisting of chain belt and sliding belt conveyors 1 piece dedusting system with backwash function for the filter cartridges, manufacturer Impact Air Systems Ltd. Remark: The plant is located in Germany, is still fully assembled, connected to electricity and could be inspected in operation (without material input) if required. The sale of the plant is ex location, Germany. The dismantling and loading of the entire plant as well as the broom-clean handover of the hall is at the risk and expense of the buyer. During dismantling, the owner can sporadically provide logistical support with forklift trucks, wheel loaders and excavators. The bid of the prospective buyer shall be submitted for the entire plant or individual components. This bid always includes the dismantling of the machines and equipment as well as their loading, removal and broom-clean handover of the hall. Technical documentation for the plant and the components (operating instructions, CE declaration, electrical and hydraulic circuit diagrams) are available exclusively in German. An inspection of the plant is possible after sending the complete company data ("self-disclosure") of the prospective buyer and a subsequent credit check by arrangement. We accept no liability for the technical details or any errors.

Condition: good (used), 1 x ICON Engineering Crate Washer 3 phase Located in Scotland UKFM2-6026 Dpg37H

Year of construction: 2021, Condition: excellent (used), Tomra Optical sorter model 1000 halo. For high performance sort/grading. top and bottom sensors with rejection. Can work on various veg and fruit products. Cm97Rajmy

Year of construction: 2004, Condition: good (used), machine/vehicle number: 23670563, Manufacturer: Lubo (Bollegraaf) Dnbyax Type: OCC

Year of construction: 2021, Condition: new, Functionality: fully functional, Recycling station Recycling collection containers for PET bottles etc., rechargeable battery NEW, unused, partly with traces of transportation original price € 4700,- Total height 2400 mm for outdoor use Body (LxWxH 1400 x 1100 x 2400 mm) coated metal Solid, galvanized base with forklift lug at the front and rear Insertion opening approx. 250 x 145 mm lockable (VA steel, brushed), some with additional smaller opening for battery etc. Large door below the slot for removal Year of construction 2021 unused with signs of storage and transportation U2Xpcnxldp with ventilation slots Sloping roof for water drainage 5 x available unit price All information without guarantee more information, before purchase, on request

Year of construction: 2018, operating hours: 100 h, Condition: used, Functionality: fully functional, Force Maincylinder: KN 1.000 Capacity: car/hour 30 Measurement: 2,2x8 mxm Machine weight 18 to Cxxwdbapzo Place: Austria Available immediately

Condition: used, For sale is a sorting plant for commercial waste, paper, cardboard, plastics etc., year of construction 2022, only 151 operating hours, with a sorting capacity of up to 20,000 tonnes/year, in two-shift operation. The plant consists of the following components: Cfwjv9Ltnw 1 piece feeding / dosing hopper with steel slat conveyor and a dosing drum, manufacturer Bollegraaf, type BDF-1200/2000 1 piece ascending conveyor between the feed hopper and the sorting cabin, manufactured as a troughed conveyor, manufacturer Lubo Systems, type TBM 2000 x 15000 1 piece sorting cabin, air-conditioned (heated), measuring 14,500 x 5,732 x 3,270 mm (l x w x h), with 4 sorting stations, 8 discharge chutes and 5 material bunkers underneath. The concrete blocks are not included in the scope of delivery of the sorting system. 1 piece sliding belt conveyor as sorting belt, manufacturer Bollegraaf, type HBGT 250/1400 * 15000 1 piece ventilation system for the sorting plant with an air capacity of 8,000 m³/hour, heated with 93.8 kW electrical heating power, manufacturer MANDIK. The area required to install the sorting system in its current configuration is at least 46 x 7.5 m (345 m²). The height of the sorting cabin including the ventilation pipes is 7,370 mm. Remark: The system is located in Germany, is still fully assembled, connected to electricity and could be inspected in operation (without the use of materials) if required. The plant is sold ex works. The dismantling and loading of the entire system as well as the broom-clean handover of the hall is at the risk and expense of the buyer. The owner can provide sporadic logistical support during dismantling with forklift trucks, wheel loaders and excavators. Technical documentation for the system and the components (operating instructions, CE declaration, electrical and hydraulic circuit diagrams) is only available in German. The existing control cabinet controls all of the customer's machines in two halls and is therefore not included in the scope of delivery of the sorting system. The control cabinet is disconnected on site, dismantled and remains with the previous owner in order to be able to continue operating the remaining systems on site. Only the frequency converters for the individual machines of the sorting plant are included in the scope of delivery. The concrete blocks under the sorting plant are also not included in the scope of delivery and remain with the previous owner on site. A viewing of the plant is possible by appointment after the prospective buyer has sent the complete company details (self-certification) and a subsequent credit check. We accept no liability for the technical details or any errors.

Condition: good (used), Year of construction: 2021, An almost new, complete and compact PMD sorting plant for plastics is for sale. The capacity is +/- 20 tons per day and the following materials are sorted out. Fractions: Non-ferrous metals, ferrous metals, hard plastics, soft plastics, glass, residual materials, etc. The steel structure, all conveyor belts, the control box, the compressor and the shredder date from 2021 and are still in excellent condition. The other machine parts were completely checked before installation. The shredder is equipped with a material compactor after operation, which pushes the waste into the rotor blades if necessary. The system consists of the following parts: - H01.01 Bruns Walking Floor Bunker, type AB 6022, year of manufacture 2022 - H01.02 Chain conveyor, dimensions 9,503 x 2,000 x 2984 mm - Z01.03 Schomberg shredder including new blade set, type ES90/135-D, year of construction 2020 - H01.04 Chain conveyor belt, dimensions 22,421 x 1,118 x 10,448 mm - F01.05 Ballistic separator, type STT 5000, year of construction 2007 - H02.01 Conveyor belt, dimensions 3,972 x 1,025 mm - H02.02 Conveyor belt, dimensions 1,3050 x 1,025 mm - H03.01 Conveyor belt to large Tomra, dimensions 5,557 x 2800 mm - F03.02 NIR Tomra, type NIR 2800, year of construction 2019 - F03.03 Tomra extractor hood - H03.04 Conveyor belt under blow-out hood, dimensions 10730 x 1000 mm - H03.05 Conveyor belt, dimensions 9,552 x 1,025 mm - H03.06 Conveyor belt, dimensions 9,802 x 1225 mm - F03.07 Magnetic belt - F03.08 NE Eddie Current, type SZNF150003, year of manufacture 2005 - H03.09 Conveyor belt according to Eddie Current, dimensions 4,552 x 1,125 mm - H04.01 Conveyor belt according to Big Tomra, dimensions 6,302 x 1025 mm - H04.02 Chain conveyor according to small Tomra, dimensions 5,510 x 1,000 mm - F04.03 NIR Tomra separator, type NIR 1000, year of construction 2004 - F04.04 Tomra discharge hood - H04.05 Conveyor belt according to Tomra, dimensions 4,050 x 1,025 mm - Compressor, air dryer, expansion tank, etc. in container, type INV+55P, year of construction 2020 - Complete control cabinet for shredder and PMD system mounted in container - Complete steel construction - Concrete blocks Remark: The plant is located in Diemen (NL) is still fully assembled, connected to electricity and can be inspected in operation (without use of materials) on request. The plant is sold ex location, Diemen (NL). The dismantling and loading of the entire system as well as the clean delivery of the hall is at the risk and expense of the buyer. Fsiuxgok The technical documentation of the system and the components is only available in German and Dutch. An inspection of the system is possible by arrangement. We accept no liability for the technical details and any errors.

Year of construction: 2023, Condition: as good as new (ex-display), SEPARATION TABLE. NEW MATERIAL USED FOR DEMONSTRATION. INCL. PUMP AND CONTROL PANEL. SORTING TABLE LENGTH: 2,500 mm Bmbsgy0Z9 MATERIAL / MADE IN EUROPE.

Condition: good (used), Steinert Eddy Current Separator Plant. Type : NES 50 100 E 50095 . 500mm. wide. Uzaeqph With : Stainless steel Feeder, Conveyor belt of (1.200 + 4.800=) 6.000 mm. long with Magnetic head-pulley, Conveyor belt of 2.600 mm. long, Control-unit and Under-Carriage .

Year of construction: 2005, Condition: reconditioned (used), Functionality: fully functional, How do you do? Chx9Vzltna We are offering you an OCC sorting system consisting of a PaperSpike, type 2000, from the manufacturer Grumbach und Petermann GmbH, with a paper discharge belt, Bollegraaf type HBGT 1200 x 4760 15° and a single-deck star screen, fine, from the manufacturer Lubo Screening & Recycling Systems B.V.. The machines were dismantled down to the base frame, derusted, primed and finally painted. Defective shafts and rubber stars, the V-belts and spikes from the PaperSpike and pneumatic cylinders were replaced. All bearings and drive chains were replaced and the motors and gearboxes were checked. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: refurbished (used), Year of construction: 2009, Functionality: fully functional, conveyor belt length: 2,500 mm, conveyor belt width: 900 mm, conveyor belt speed: 4,000 mm/s, total width: 1,560 mm, total height: 2,500 mm, overall weight: 700 kg, power: 5 kW (6.80 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 16 A, Equipment: documentation/manual, emergency stop, Inside width: 430 mm Inside depth: 550 mm Length: 7300 mm Driving power: 15 kW Dpjnfef Driving Speed: 38 1/min Operating voltage: 3 x 400 V AC + PEN, 50 Hz

Year of construction: 2015, Condition: reconditioned (used), Technical data Feed hopper with hydraulic moving floor and bag opener: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Crkivoxb Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high. Comments: The machine is currently in our workshop, being overhauled and finally tested. We expect the press to be ready for operation at the beginning of August. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2006, Condition: excellent (used), NIR sorting unit with a usable width of 2000 mm, complete with scanner, evaluator, acceleration belt, nozzle bar, separating apex and compensating hood Pkbaaeki

Year of construction: 2024, Condition: new, MADE IN GERMANY BTS-Bags for BTS-Film Compactor / Sack Holder BTS-Bags 240l („Made in Germany“) transparent and from high quality LDPE Reclaim / Regenerat 10 Bags per roll / 10 rolls per box Cjt7Iqpuum Film Compactor, Sack Holder, Foil Compaction Rack, Film Compaction Rack, Film Collection Pedestal, Film disposal

Condition: reconditioned (used), Sorting machine overhauled and ready for operation the price is depending on condition and equipment, software and hardware status 2008 - 2014 they like to come with material for trial sorting. the machines are for slag, shredder residue, residual fractions, cable, aluminum, Va, Ne about 12-120mm depending on the fraction 1-2 screen cuts should be made. Functionality induction and magnetizability, discharge with air approx. 3- 9 to throughput depending on material up to 40 to B3Nwsplj2A

Year of construction: 2007, Condition: excellent (used), NIR sorting unit with a usable width of 2000 mm, complete with scanner, evaluator, acceleration belt, nozzle bar, separating apex and compensating hood Caepyl7Cyw

Year of construction: 2007, Condition: excellent (used), NIR sorting unit with a usable width of 1000 mm, complete with scanner, evaluator, acceleration belt, nozzle bar, separating apex and compensating hood Pi97Nt0Z