Computer Makarow e. K.

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: MX60252 and MX60400, We have 2 Datacard MX6000 machines for sale, including spare parts, foil, and additional accessories. The machines are used but in good condition. Rodpfsyfminex Agyon Serial numbers: MX60252 and MX60400 Configuration for MX60252: - Operating System: Microsoft Windows 7 Embedded Standard - OS Version: 6.1.7601 Service Pack 1 Build 7601 - Year of manufacture: 2008 - Approximate card counts: - goodCards: 16,812,231 - pickedCards: 16,883,746 - Modules included: - System Module - Input Module - Cleaning Module - Magstripe Module - Thermo Front Module Gen 2 - Thermo Rear Module Gen 2 - Output Module Configuration for MX60400: - Operating System: Microsoft Windows 7 Embedded Standard - OS Version: 6.1.7601 Service Pack 1 Build 7601 - Year of manufacture: 2009 - Approximate card counts: - goodCards: 18,240,693 - pickedCards: 18,287,221 - Modules included: - System Module - Input Module - Cleaning Module - Magstripe Module - Thermo Front Module Gen 1 - Thermo Rear Module Gen 1 - Output Module - 2x Chip Module Rack (type: 11 stations Smartware), never used, only for transport. Note: The node board is missing from one of the modules. Additional test equipment for magnetic stripe: - 1 pc Barns MT3000E Verify (2018), s/n ME3455 The price applies to both machines together.

Condition: like new (used), Year of construction: 2015, 1 used Heidelberg InpressControl, removed from a 2015 Heidelberg XL 106-5+L(X2). Rodpfoyfgt Hex Agyjn

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: 352/2015, QUICKER U ultrasonic cleaning tank for raster/anilox rollers. The tank accommodates rollers up to 410 mm (and possibly a few mm more). It has capacity for ultrasonic cleaning of two rollers at the same time and one position for rinsing. The tank is equipped with a filtration system which extends the detergent solution's usability. The set includes a complete set of adapters for adjusting to small roller widths (double adapter for the washing section and a single adapter for the rinsing section). The washing section is equipped with heaters and the solution temperature can be adjusted as needed. Ultrasonic cleaning duration is set by a mechanical timer. Basic specifications as shown in the table: Operating voltage 230V / 50Hz, ultrasonic power: 3000W. Redsyda Nxjpfx Agysn

Year of construction: 2013, condition: used, functionality: fully functional, compressed air connection: 8 bar, continuous operating pressure: 6 bar, machine/vehicle number: 375405, Hot stamping machine RS Druckmaschinen Type 75 with conical round printing unit and sliding table. Suitable for embossing thanks to the sliding table, but used for photorealistic decoration of reusable cups with image-decor foil using the conical round stamping process. Includes a teach box for setting the print area in round stamping and features electronic pressure monitoring. Redpfx Asyc Ny Rsgyon

Condition: ready for operation (used), A Canon large format plotter is available. Print resolution: 600dpi/1200dpi, min. line width: 0.06mm, print speed: 8xA1/min, roll capacity: 4, max. media capacity: 730m², paper weight: 60g-110g/m². Machine dimensions X/Y/Z: approx. 1550mm/850mm/1500mm, weight: approx. 250kg. Includes 5 tones. Documentation available. On-site inspection is possible. Rodpfx Aeycwruogyon

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Magnesium etching machine STOMA 240L The front bearings of the machine need to be replaced. Rsdpfx Asyb R Rzegysn The machine is operating well. Chiller included; however, the chiller needs to be installed by a professional. Currently, the machine is being cooled by water.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Konica Minolta SD-506 WY3’ brochure finisher. Item for sale: 1 x Konica Minolta SD-506 with the following features: Product specification: WY3 Not the right equipment? We have additional accessories and machines in stock. Feel free to contact us! Condition: Rsdjyamx Espfx Agyon This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functionality test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: ZSCT-II (Bj.2014) + ZSCT-III (Bj.2019), overall weight: 570 kg, Year of construction: 2014, power: 4.5 kW (6.12 HP), We are offering a fully refurbished Iversen graphic ZSCT-II powder coating machine, year of manufacture 2014, for a negotiable net price of €14,000. In addition, we have an Iversen graphic ZSCT-III powder coating machine, year of manufacture 2019, available for a negotiable net price of €7,900, not refurbished but in working condition. As a special bonus, you will also receive a complimentary Iversen graphic ZSCT-III powder coating machine, year of manufacture 2016, provided as a donor for spare parts. Dimensions can be seen in the attached image. Model number: ZSCT-II Voltage: 380 V Power: 2–4.5 kW Belt width: 1000 mm Belt length: 1000 mm Sheet thickness: 1–5 mm Overall dimensions: 2000 × 1800 × 1850 mm Net weight: 570 kg Model number: ZSCT-III - Year 2019 - 91/0150 Voltage: 380 V Power: 3.1 kW Pressure: 8 bar Rodpfsx Uqbnjx Agyjn Model number: ZSCT-III - Year 2016 - 51/0116 (for spare parts) Voltage: 380 V Power: 3.1 kW Pressure: 8 bar If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2018, condition: used, functionality: fully functional, For Sale: SCREEN PlateRite 4600S – 2018 I am offering a SCREEN PlateRite 4600S CTP system from 2018, fully operational, well‑maintained, and in very good technical condition. A reliable and efficient solution for printing companies looking to upgrade their prepress workflow. Technical Specifications - Year of manufacture: 2018 - Productivity: up to 21 plates per hour - Laser head: 32‑diode - Total plates imaged: 141,000 - Processor: Glunz & Jensen TIGER 85T - Stacker: plate stacker included - RIP: FUJIFILM XMF - PC server included Condition & Availability The machine is in very good working condition and has been in continuous production. Available from February 1st, 2026. Redpfx Aox Rpauogyon

Condition: used, Year of construction: 2020, functionality: fully functional, Equipped with Robatech gluing system Rodpfox Rc Rysx Agyjn

Condition: used, Format: 0x0 Equipment: Redpfx Ajx Rcw Tsgyen Linotype-Setzmaschine

Condition: used, Year of construction: 2017, functionality: fully functional, Machine type: Laminating and coating Processes: Suitable for WET and DRY lamination Cutting system: Blade cutting system for polyester Feeder: Mabeg feeder Minimum sheet size: 32 × 29 cm Maximum sheet size: 106 × 142 cm Maximum mechanical speed: 70 m/min Redpfox N Ucxjx Agysn Maximum production speed: 65 m/min

Condition: used, Format: Equipment: Speed: 4,300 cycles per hour Fold types: Letter, Single Fold, Zigzag Fold, Doub Job Memories: 20 Folding Capacity: 8 Sheets Document Feeder Capacity: 325 Sheets Maxi Feeder: 1,200 Sheets Envelope Capacity Hopper: 500 Envelopes Rjdpox N Ng Ejfx Agyon Envelope Capacity Side Exit: 500 Envelopes Envelope Capacity Power Stacker: 500 Envelopes Set Thickness: 2.5mm Reverse Reading: Yes Cascade Feeding from all Feeders: Yes High Capacity Power Stacker: Yes Dimensions: Depth: 460mm, Height: 920mm, Length: 1 Dimensions: Weight: 140 Kg (6 Stations)

Year of construction: 2003, condition: used, functionality: fully functional, D&K Acculam 2760 Laminator with Feeder, Exit tray and Transformer. Recently removed from a printshop. Machine has been in full working order and producing live jobs. Rjdpsx Nawnofx Agyjn Machine is sold Ex works. No cutting unit is included. Machine is located in my warehouse in Tadley/Reading UK. Video in production on request. The D&K System 2760 (often referred to as the Acculam series) is a fully automated one-sided lamination system designed for high-volume, short-run digital and offset printing. It typically includes an automatic feeder, a laminator with curl management, and a flying knife separator. Technical Specifications Max Lamination Speed Up to 60 fpm (18 meters per minute) Max Sheet Size 26" x 30" (standard) or up to 28" x 40" (B1 version) Min Sheet Size 8.5" x 11" (21.6 cm x 27.9 cm) Paper Weight Range 80 lb. Text to 18 pt. Board (approx. 115–350+ gsm) Temperature Range 180°F – 300°F (70°C – 140°C) Warm-up Time Approximately 20 minutes Electrical Requirements 230 Volt, 30 Amp, Single Phase Air Requirements 6 cfm (some models may require up to 8 cfm) System Dimensions 5' W x 14' L x 5' H Key Features Feeding System: Utilizes a state-of-the-art automatic suction feeder and belt table to ensure accurate sheet registration. Adhesion Technology: The System 2760 DN variant features two sets of heated nip rollers specifically for better adhesion to difficult digital prints like Xerox iGen or HP Indigo. Curl Management: A patented decurling system ensures sheets lay flat even when using thin paper or thick films like polyester and nylon. Versatility: Supports both thermal (heat) and pressure-sensitive (cold) lamination with optional release liner take-up for PSA products.

Condition: used, Year of construction: 1933, functionality: fully functional, overall weight: 5,000 kg, total length: 4,000 mm, total height: 2,000 mm, total width: 2,000 mm, Lithographic press 55 x 75 cm. The machine is in very good mechanical condition, but will definitely require new rollers for printing. All spindles are present and some are still usable. Ideal machine for art studios or lithography workshops to produce high-quality lithographs. Very rare machine. Rsdpfsx D Tnajx Agyon

Condition: ready for operation (used), Year of construction: 1929, functionality: fully functional, machine/vehicle number: Nr. 17575, overall weight: 600 kg, total length: 2,150 mm, total width: 1,100 mm, total height: 2,000 mm, Lithographic press, also known as scraper press, for manual printing from lithographic stones. Used by artists/lithographers, in schools, art schools, and museums. The machine was most recently used in the atelier of the Gutenberg Museum in Freiburg for demonstrations and workshops. Stone format up to 70 x 100 cm. Also very interesting as a display piece in entrance halls, restaurants, etc. Rjdpfx Agox A H I Djyon

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, paper width (max.): 520 mm, paper height (max.): 762 mm, resolution (max.): 600 dpi, machine/vehicle number: 63507120672, production capacity: 40,000 unit/h, Submission of a bid obliges the buyer to collect the item within the stipulated period, no later than 31/12/2025! TECHNICAL DETAILS Printing technology: Inkjet Number of print units: up to 4 Number of ink cartridges: 12 Print resolution: 600 dpi Redpfx Agsxyf E Aeyon Print speed: 40,000 addresses/hour Print area: 762 × 152 mm Paper formats Min. paper size: 85 × 40 mm Max. paper size: 762 × 520 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 1,476 × 58 × (810 – 915) mm Weight: 131 kg EQUIPMENT Feeder for filled envelopes or finished brochures Double tabber for sealing self-mailers or applying labels Vacuum transport belt Direct printing system with 6 print heads (IR possible) Belt delivery at a 90° angle

Condition: good (used), Offer consisting of: Transomat/stacker by Knorr Systeme, robust design, year of manufacture 1999, incl. material for supplementing a guillotine cutter, year of manufacture 1999. Rjdpsxwqx Njfx Agyen

Year of construction: 1998, condition: good (used), Offer consisting of: Polar RA-4, year of manufacture 1998, with discharge roller. Rodpfx Agsxwqxpsysn

Year of construction: 2004, condition: good (used), Offer consisting of: Polar RA-4 jogger, year of manufacture 2004, with delivery roller. Rsdsxwqw Ejpfx Agyjn

Condition: ready for operation (used), Year of construction: 1997, 1997, Redpfxoxwp Uvo Agysn speed: 500 m/min, roll dimension: 450 – 1550 mm,

Year of construction: 2018, condition: excellent (used), functionality: fully functional, For sale: professional M&R Mini Sprint 2000 dryer, ideal for efficient drying in the printing industry. This dryer ensures high drying quality and precision, and is suitable for various types of printing processes. Redpoxvzfdsfx Agyen

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2197, Basic Specification: Two-station machine with a 250 mm web width. Print Head: One hot foil printing and embossing unit. Print position adjustable longitudinally, laterally, and rotatively. Features quick-change die plates. Die-cutting Station: Integrated die-cutting and punching unit with adjustable cut position longitudinally, laterally, and rotatively. Quick-change cutter plates for rapid setup. Web Indexing: Digital electronic web registration system with a zero-backlash indexing drive. Unwind Unit: 1,000-metre unwind capacity, powered nip with loop feed to a vacuum tension drum for consistent web tension. Rewind: Separate label and matrix rewinders with independent rewind motors, reversible for both inside and outside rewinding operations. Foil Indexing: Two servo-driven foil pull units with quick-release nip rollers for efficient foil management. Direct Remote Access Unit: Enables direct remote access to the Newfoil machine via the Internet. The unit connects to your company network using a standard Ethernet cable. Firewall-friendly, utilizing a fully secure SSL-based VPN tunnel. Temperature Control: Digital temperature control with LED display, ranging from 0°C to 400°C. Redext N Twopfx Agyon Operating Speed: Variable speed servo drive. Maximum throughput: 18,000 impressions per hour; minimum: 2,000 impressions per hour. Guarding: Fully enclosed “Clear View” guarding system with interlocked doors in compliance with current E.C. safety regulations. C.E. Mark: Each machine is C.E. marked and individually certified.

Condition: used, Year of construction: 2005, functionality: fully functional, Offered for sale is a Miatex micro-perforating machine, year 2005, working width 1400 mm, complete with extraction units and single-fold unit. The machine is in excellent operational and maintenance condition, ready for immediate integration into a production line without the need for significant technical interventions. Assembly, disassembly and transport are at the buyer's expense. Designed to ensure precision, reliability, and continuous operation, this equipment is ideal for companies in the converting and packaging sectors requiring an efficient and high-performance micro-perforation system. Rsdpfx Asxr Uygjgyon

Condition: excellent (used), Year of construction: 1995, FULLY AUTOMATIC INLINE MACHINE FOR FOLDING BOXES BOBST MIDLINE 924 Speed: up to 18000 boxes per hour Nominal machine width: 2400 mm Nominal plate cylinder circumference: 1000 mm Largest printing area: 920 x 2400 mm Maximum corrugated board thickness: 10 mm Standard slitting blade thickness: 6.35 mm Average connected load: 200 kVA The line consists of: 1) Feeder Serco 2) Main machine – Flexographic printing machine midline 924 Colors: 3 // Automatic washing device 3) Slotter (Riller) Longitudinal slots // Tool is installed in the machine. Redexrfrajpfx Agyjn 4) Punching module (e.g. for punching handles) 5) Breakout vibrating station (Material – punching residues are disposed of using compressed air) 6) Glue station Robotech 7) Folding unit 8) Counting station & display The specified number of cartons will be bundled - up to here main unit - 9) Package binder / bundling machine CEMA Fully automatic strapping machine with weld seal and press for 5 mm plastic strapping, for binding corrugated cardboard bundles in the direction of travel of the flute 10) Palletizing system Martin Automatic layer formation. Roller tables receive the packages from the bundling machine. The packages are positioned using the ball bearing table according to their arrangement in the preselected position. If necessary, the package can be rotated 90° or 180° simultaneously with the lateral movement.