CM Druck & Industriemaschinen

Condition: used, Year of construction: 1997, Standard machine Dcsdpfx Asy N Tacsnfog

Condition: new, Year of construction: 2024, Hard cover making table -Casemaker- The device is brand new, with a 12 month warranty. European production, based on branded subassemblies. Duty Cycle: The operator manually handles the covering material, to the gluing device in which the hot glue is automatically applied (operating temperature 60-70 ° C). A sheet of covering material with glue the operator places it manually on the suction table, then manually handles sheets of cardboard and spine. The pre-prepared cover is inserted into device manually, which winds up and glues the top and bottom of the covering material (patented brush system). During the sizing operation, the cover is pressed through the guide rolls. Covers leaving the unit are immediately ready for further processing The machine is equipped with: – gluing device for applying glue onto the top of the sheet – table with a suction – guides fixing the veneer and cardboard – wrapper module – delivery table Technical data: Max format: 840x500mm Min format: 100x100mm Performance: 100-150 covers / h Thickness of the covering material: 80-200 gsm Thickness of cardboard: 1-4mm Overlap covering material: 13-20mm Glue temperature: 30-100 ‚C Glue capacity: 2-3kg Smooth adjustment of the rotation speed of the rollers and brushes Types of covering material: fabric, laminated paper, photographic paper, imitation leather, PVC, polyurethane. Dimensions of the machine: 1500x1000x1000mm Power supply: 380V Consumption: 3.7kW Dedpfxey N Dyae Anfocg Machine weight: 500kg

Condition: good (used), Renz DTP 340M Perforator The machine is in very good condition, ready for production. Includes a Renz PBS 340 for mounting fixtures in plastic, and a waste container. Electric perforation device for closed spirals, screw-in spirals, or plastic spines from the German company RENZ: • Device for perforating paper, cardboard, or PVC with a working width of 340 mm, operated by a foot pedal • Perforates up to 35 sheets in a single cycle (depending on the module) • Quick and easy strip replacement • Can be equipped with strips with square, round, and oval holes in various sizes • Can be used with strips with a recess for hanging • All perforation strips for closed spirals are equipped with an individual needle shut-off option as standard, without having to remove the strip from the device • Can be connected to the WBS 360 manual clamping module Technical parameters: Maximum perforated material length: 340 mm Dcodpfx Aoy N Dxpsnfog Maximum perforated material thickness: 3.5 mm (up to 35 sheets) Dimensions: 36 x 49 x 25 cm Power supply: 230 V / 50 Hz Net weight: 40 kg Pitch: 2:1, 3:1 (depending on the type of strip installed) The set includes a tool 5.5 x 3.5 mm 2:1.

Condition: good (used), Leonhard Kurz Model H Book Edge Gilding Machine Dedpfxey N Dxco Anfocg This machine is in very good condition and ready to use. This machine is from the popular Leonhard Kurz manufacturer, manufactured in Germany. Description This edge gilder is suitable for books, cards, invitations, and business cards. Hand-operated clamp, powered by only 230V. A powerful clamp with adjustable pressure ensures repeatability. The machine features a convenient material clamp, depth adjustment, and a convenient base with wheels. Specifications: Mechanical clamping mechanism Power consumption: 170W Power supply: 230V Machine weight: 80kg

Condition: good (used), Hang Piccolo 101-20 Eyeleting machine The machine is in perfect condition and ready to use. Made in Germany. Technical specifications: 1 head Eyelet diameter inside the hole: 4 mm. Dsdpfx Ajy N Dw Senfscg Maximum capacity: 20 sheets of 80gsm Front margin: 40 kg. Foot pedal operation The machine punches, feeds, and crimps the eyelet in a single pass.

Condition: good (used), Renz Punch 700 Perforator This machine is in very good condition. Dcjdpfxjy N Dwls Anfeg Electric drive, foot pedal control. Includes a 3:1 perforation tool (4x4mm square) and a hanger cutting module. Side tables are also included. Manufacturer’s description: Perforating machine with a working width of up to 700 mm. Designed for continuous operation and heavy loads. Foot pedal-activated operation. Perforation of up to 40 sheets (4.5 mm) in a single cycle. Quick and easy replacement of perforation strips. Available with or without a hanger cutout. Two-piece strips can be used – one tool allows for perforation of both books without a hanger cutout and calendars with a hanger cutout. The machine operates on a 3-phase, 380V power supply. Weight: 325 kg. Made in Germany.

Condition: used, Year of construction: 2002, functionality: fully functional, Muller Martini Prima Amrys Dcjdpfxjy Na Rhj Anfog

Condition: used, Year of construction: 2000, functionality: fully functional, Muller Martini Corona C18-41 16 Gathering Stations Dodpfsy Na Efsx Anfecg 16 Stream Feeder

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 0/68679, product height (max.): 410 mm, paper weight (min.): 80 g/m², paper weight (max.): 120 g/m², TECHNICAL DETAILS Materials Paper covers: 80 - 120 g/m² Cover material thickness: 0.1 - 0.3 mm Board thickness: 1 - 4 mm Format range for book covers or folders Height: 105 - 410 mm Width: 170 - 720 mm Spine width: 5 - 15 mm Back width: 18 - 100 mm Cover flap, all sides: 12 - 17 mm Spine format from roll material Width: 6 - 80 mm Thickness: 0.3 - 0.5 mm Spine from magazine Width S: min. 6 mm Width S: max. 80 mm Thickness: 1 - 3 mm Spine trimming for roll material: approx. 2.5 mm per side Cutting deviation between individual units: max. 0.2 mm Spine roll dimensions Outer diameter: max. 500 mm Core diameter: 50, 75, 100 mm Format range for machines with rotary board cutter Single-piece board cutting Height: min. 105 - 410 mm Width B1: 150 - 700 mm Width B2: 170 - 720 mm Width S1: 6 - 80 mm Dcedsy Ixw Repfx Anfsg Board and spine pass through rotary board cutter Height: 105 - 410 mm Width: 170 - 720 mm Width: 6 - 80 mm MACHINE DETAILS Processable materials Coated paper Paper-laminated plastics Paper-laminated fabrics Uncoated paper Note: The machine can also be optionally provided EXW. In that case, costs for disassembly and loading will not be incurred.

Condition: used, Year of construction: 2015, Europrogetti EP175 ref 2979 Dedpfx Anjy Hxvwefscg Automatic rigid box manufacturing line Year – 2015 Complete line available soon, straight from production. Minimum box size: 50 × 30 × 12 mm Maximum box size: 600 × 415 × 185 mm Minimum wrapper format: 123 × 88 mm Maximum wrapper format: 900 × 720 mm Wrapper grammage: 80–300 g/m² Board thickness: 0.7–3.0 mm Paper stacking height: 350 mm Board stacking height: 970 mm Installed power: 11.8 kW Air consumption: 580 Nl/min Machine dimensions: 7.59 × 4.39 × 3.82 m Machine weight: 6000 kg

Condition: good (used), Karl Krause Large Bookbinding Press with Tapping Block The machine is fully operational and ready for operation. Dcjdey Hglyepfx Anfeg Manufactured by Karl Krause, Germany. The press has a tapping block that increases the pressing force. Pressure: 5 tons Plate dimensions: 550 x 490 mm

Condition: good (used), Renz Punch 500 Perforator This device is in very good condition. New model with adjustable controls. Electric drive, foot pedal control. The set includes a 3:1 perforation tool, a 4x4mm hole, and a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 500 mm Device designed for continuous operation and heavy loads Djdpfsy Hgltjx Anfscg Foot pedal-operated operation Perforation of up to 40 sheets (4 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a suspension slot Available with QSA slots (quick format change by disabling selected needles without removing the slot) Available with two-piece slots – one tool allows for perforation of both books without a suspension slot and calendars with a suspension slot (in this case, perforation without a suspension slot up to 465 mm) 3-phase powered Weight: 120 kg

Condition: good (used), Tranklein BRM 500 Book block rounding machine The machine is in very good condition, fully serviced and ready to use. Model with electric book thickness adjustment. Technical specifications: Maximum working size: 500mm Maximum book thickness: 120mm Speed: 300 cycles/h Dcodpfsy Hglmex Anfjg Power supply: 400V Weight: 300kg Easy to use, quick to set up.

Condition: good (used), Schmedt PräLeg HHS 1805 Case in machine This machine is in very good condition. Manufactured by Schmedt, Germany. The machine suspends book blocks into pre-cut hardcovers. Two gluers with smooth glue thickness adjustment. The machine comes with full documentation and a CE certificate. Dodpfxoy Hglgo Anfscg Format: Block height: 80–340 mm Block width: 110–450 mm Block thickness: 2–80 mm Capacity: approximately 200–300 pcs/h Power supply: 230V + compressed air. Weight: 300 kg

Condition: good (used), Hang 150 Double-Head Riveter for Binders Manufacturer: Hang Germany Machine has been overhauled and is ready to use. The machine is used for riveting all types of ring mechanisms. Two riveting heads with adjustable spacing. Cardboard thickness: 0.2-4mm Throat depth: 310mm Head spacing: adjustable from 35-440mm Djdpfxey Hglao Anfecg Cycle time: 0.5s Weight: 570kg Power supply: 380V The cycle is initiated by a foot pedal.

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press The machine is ready to operate. Dcjdpfoy E Ey Tex Anfeg The press has a built-in hydraulic unit. Four stations. Irreplaceable in bookbinding for the production of books, pads, etc.

Condition: good (used), Karl Tranklein PS1200 Bookbinding Shears Made in Germany. Very good condition. Cutting length approx. 1200 mm Ideal for bookbinding board, corrugated cardboard, leather, and canvas. Dsdpoy Ehngjfx Anfjcg Front cutting stop with millimeter scale. Two additional sliding stops on the table. Feet-operated material clamp. High knives, in very good condition. Weighs over 400 kg

Condition: good (used), 4-station bookbinding press for gluing blocks MURO 4 x 5000 A4/HAD Dedpfjy Ehnajx Anfecg Solid construction, waterproof board, and galvanized components. The machine is in perfect condition. Technical specifications: Format: 350x320x550 (W/D/H) Number of stations: 4 Power supply: 230V Maximum power consumption: 4kW Weight: 102kg High clamping force, flywheels with a comfortable grip. Electric drying with two power levels: 2 and 4kW Each press can be tilted up to 45′ The structure is mounted on wheels for easy movement.

Condition: good (used), Schmedt PraForm HHS 20 Book Press Djdpfx Ansy Ehm Nofecg Book press with groove burner. Very good condition. The machine came from a school. Manufactured by Schmedt, Germany. Technical specifications: Maximum format: 350 x 380 x 110 mm Weight: 250 kg Power supply: 380V Flexible temperature control.

Condition: good (used), Schmedt PraForm HHS 2100 Book Press Book press with groove cutter. Manufactured by Schmedt, Germany. Technical specifications: Maximum format: 400 x 520 x 100 mm Weight: 250 kg Power supply: 380V + compressed air. Dodpfx Ajy Ehmponfscg

Condition: good (used), Karl Tranklein EK-100 Corner Cutter Made in Germany. Very good condition. This is a professional, production-grade corner rounding machine. Sturdy cast iron construction and strong pressure ensure precise operation. Replaceable blades. Adjustable margins. One set of blades included. Stack height: 100mm Weight: 130kg Cycles per minute: 50 cycles/min Power supply: 400V Dcedpfx Ansy Ehmiofsg Waste is collected in containers. This is the model currently in production.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 759103-BDM20, Equipment: compressor, documentation/manual, Machine for Producing Hard Covers • Manufacturer: HÖRAUF (China) Djdpfsy Ec Nxox Anfecg • Model: Classic Casemaker BDM20 • Year of manufacture: 2016 • Total production: 7,731,151 covers • Machine price: €85,000.00 The machine is in excellent condition and has been regularly maintained. Photos and a video of the machine are attached.

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 12.30 315/2, working width: 1,000 mm, Equipment: documentation/manual, Tünkers Laminating Machine Type Vorwärts 1100 Fully automatic, both carrier sheet and cover sheet are processed automatically. Suitable for a wide range of applications: corrugated board, cardboard, semi-board, fabrics, films Dodsy D D A Djpfx Anfecg Max. format 1000x1400 mm Min. format 200x280 mm Carrier material weight approx. 250 g/m² – approx. 5 mm Cover material weight approx. 80 g/m² – approx. 800 g/m² Up to 2,000 laminating cycles per hour Documentation & circuit diagrams available. Incoterm FCA Oberhasli, Incoterms® 2020 – loaded on truck The machine is in operation and can be inspected.

Condition: new, This is a brand new binder, supplied in crate. The SpeedBind range of perfect binders meets the growing demand for professionally bound documents and books where quality presentation, quick turnaround, and ease of operation are essential. This SpeedBind 420 Pro offers the ability to produce A3/A4 Landscape/A4/A5 & A6 perfect bound books and documents. Key Features Colour touchscreen control for fast setup Adjustable spine clamping pressure and time Milling and notching spine preparation Combined spine and side gluing system Dcsdpfsy Dr Hdex Anfjg Single glue tank for EVA adhesives Integrated paper dust extractor Fast warm-up time Output: up to 375–450 cycles per hour Padding mode for pad production Control System Operation is via an intuitive colour touchscreen control panel. All settings — including operation mode, glue temperature, clamp pressure, clamping time, and speed — are managed from the touchscreen. Setup is completed within seconds, ensuring consistent results across varying book sizes. Minimal operator training is required. Spine Preparation Spine preparation is performed using an extra-durable milling and notching disc equipped with: 20 milling teeth 2 notching blades Before glue application, the book block passes over the disc to break down paper fibres on the spine. This process allows superior glue penetration, improving binding strength and durability. Glue System The SpeedBind features a single glue tank for both spine and side gluing. Designed for modern high-strength EVA glues, it eliminates the need for separate adhesives, simplifying operation and maintenance. A tail structure stabilizes the glue layer on the spine before the book block meets the cover. Excess glue is removed automatically, ensuring precise application and clean, professional finishes. Clamping System The adjustable clamping station allows fine control of: Clamp pressure – prevents over- or under-clamping Clamping time – adjustable for different paper and cover materials This ensures a perfectly squared spine and consistently high-quality binding results. Dust Extraction An integrated paper dust extraction system is included as standard. During milling and notching, paper dust is collected in a cloth bag, reducing internal buildup and maintaining clean, reliable performance. Padding Mode In addition to book binding, the SpeedBind includes a padding mode for producing pads and similar products, increasing production flexibility. Specifications Manufacturer Glendale Model SpeedBind 420 Pro Condition New Stock Number 114909 Mode of operation Manual, automatic & fast Max spine length 420mm Sheet capacity 2-60mm Production speeds 375-450 per hour Control panel 7" Colour Touchscreen Milling & notching 20 milling teeth and 2 notching blades Side Glue Yes Adjustable clamp pressure Yes Adjustable clamp time Yes Warm up time 25 minutes Dust extractor Included Electrical requirements 220-240v 50Hz Weight 285kg Dimensions L1600mm x D590mm x H1100mm

Condition: new, Year of construction: 2025, Case Maker with Robotic Hand – High Efficiency Book Cover Machine Djdpfx Anoy Dqx Ssfecg We are offering a high-quality case making machine designed for the production of book covers, notebooks, and similar hardcover products. Equipped with a robotic hand, this machine ensures precision, consistency, and efficient handling during the production process. It is suitable for working with a wide range of materials, including gray board, MDF, wooden boards, mirror board, as well as various cover materials such as art paper, specialty metallic papers (gold/silver), fabric, and velvet. Ideal for print shops, binderies, and packaging manufacturers looking to improve productivity and product quality. Working speed: 15-28 pcs/min Max hardcover size: 460x300mm Min Hardcover size: 55x60mm Case Thickness range: 1-12mm Cover Thickness range: 100 -250 g/m2 Case materials range: Gray board, wooden board. mdf, mirror board Cover materials range: Art paper, Silver/gold paper, Fabric, Velvet Machine dimension: 1150x1500x1700mm Machine weight: 650kg