Gme S.L.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: MAX5, overall weight: 6,850 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine. • Tool magazine capacity: 30 tools Kdodpjy Tw R Hsfx Agnjl • Spindle hours: approx. 7,800 h • Machine weight: approx. 6,850 kg • Total power requirement: approx. 28 kVA • Internal coolant system Additional equipment • Chip conveyor Software Features Adaptipath: Trochoidal milling for higher removal rates, controlled engagement, and residual material detectionDialog / NC Mix: Allows mixing of Dialog and NC programsNCPP (Industry Standard Software): • ISNC extended NC mode for FANUC compatibility (FANUC 0) • Parameter and MACRO programming • Subprogram technology for NC modeUlti-Motion: • Dynamic Lookahead (up to 10,000 blocks) • Improved surface quality via "Motion Control Technology" • Reduced cycle times and machine wearStandard Features: • Simulation graphics • Pocket milling with islands • Synchronous tapping (without compensation chuck) Hardware Components & Accessories • Cooling & Chips: • High-pressure coolant system (Through-Spindle Coolant) at 20 bar (Emulsion type) • Spindle cooler • Standard coolant system with spray gun • Chip conveyor and flushing system for chip removal • Chip splash guard cabin • Tooling: Integrated hydraulic tool clamping system • Workspace: • LED machine light • Signal light for operating status Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, overall weight: 6,850 kg, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2013 and features X-Travel of 1067 mm, Y-Travel of 610 mm, and Z-Travel of 610 mm, with a tool holder SK40. If you are looking to get high quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information. Kdjdpfey Tw Ryjx Agnsl • Spindle hours: approx. 12,603 h • Total power requirement: approx. 28 kVA Additional equipment • Chip conveyor • Internal coolant system Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,502 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 6,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis KONDIA A10 vertical machining centre was manufactured in 2011. It features a travel of 1000 mm on the X-axis, 500 mm on the Y-axis, and 500 mm on the Z-axis. The machine is equipped with a spindle speed of 8000 rpm and a tool capacity of 24 slots. If you are looking to get high-quality machining capabilities, consider the KONDIA A10 machine we have for sale. Contact us for further details. Kedpfx Ajy Twd Tjgnjdl - Travel X-Axis: 1000 mm- Travel Y-Axis: 500 mm- Travel Z-Axis: 500 mm- Rapid Traverse: 20 m/min- Spindle Speed: 8000 rpm - Tool Capacity: 24 slots- CNC Control: Heidenhain iTNC 530- TE Electronic Unit Type: TE 520B- Control On Hours: 17849 h- Machine On Hours: 11292 h- Program Run Hours: 2726 h- Spindle Run Time: 2502 h- Total Power Installed: 37 kW- Year of Manufacture: 2011- Machine Weight: 6000 kg- Voltage / Frequency: 400 V / 50 Hz- Air Pressure: 6 bar- Scope of Delivery: touch probe

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table width: 620 mm, table length: 700 mm, number of slots in tool magazine: 24, Equipment: documentation/manual, MIKRON VCE 600PRO VERTICAL MACHINING CENTER, MANUFACTURED IN 2011 EQUIPPED WITH HEIDENHAIN iTNC 530 ELECTRONIC HANDWHEEL TRAVELS: X 600, Y 500, Z 540 MM TABLE SURFACE: 700 x 620 MM 24-TOOL RANDOM TOOL CHANGER SPINDLE AT 10,000 RPM, 18 KW SPINDLE COOLING DUAL CHIP CONVEYOR LINEAR SCALES INTERNAL COOLING AT 18 BAR TOOL MEASURING PROBE Kjdpfxoy Tvr Nj Agnsdl

Condition: like new (used), Year of construction: 2019, operating hours: 2,352 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: 31i-B, workpiece weight (max.): 700 kg, table width: 500 mm, table length: 1,000 mm, table load: 700 kg, rotational speed (max.): 20,000 rpm, spindle speed (max.): 20,000 rpm, operating hours of spindle: 2,352 h, coolant supply: 30 bar, spindle motor power: 22,000 W, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, DOOSAN NX 5500 II VERTICAL MACHINING CENTER YEAR OF MANUFACTURE: 2019 CNC FANUC 31i-B SPINDLE: 20,000 RPM, 22KW, HSK-A63 TRAVEL: X 900, Y 550, Z 500 MM RANDOM TOOL CHANGER: 30 TOOLS, TOOL-TO-TOOL CHANGE TIME: 1.6 S DUAL CHIP CONVEYOR ELECTRONIC HANDWHEEL INTERNAL COOLANT SYSTEM: 30 BARS LASER PROBE FOR TOOL MEASUREMENT: RENISHAW NC4 PROBE FOR WORKPIECE MEASUREMENT: RENISHAW OMP60 WEIGHT: 9000 KG Kodpfx Aey Tvbksgnedl

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 1020 x 510 x 510mm, Table 1200 x 450mm, Spindle speed 8,000rpm, Spindle taper BT40, Kdsdjy Tka Ujpfx Agnel Spindle Motor 11kW, Fanuc Oi-MC Control, 24 Station ATC, Coolant, Low Volt light, swarf conveyor

Condition: good (used), Year of construction: 2012, functionality: fully functional, Posmill C 1000, Year of manufacture: 2012, Control system: Fanuc Oi 100, Travel range X/Y/Z: 1000/530/630 mm, Kdsdpfx Asy Thw Dsgnsl Tool changer: 30-position, BT 40, Spindle speed: up to 10,000 rpm, Table size: 1150 x 560 mm, Maximum table load: 700 kg, Hexagon infrared measuring probe, Hexagon infrared tool measuring system, IKZ: 20 bar.

Condition: good (used), Year of construction: 1997, Ready for demonstration under power. ++++ SPECIAL PRICE €5,900 ++++ Wemas VZ 1000, Kdodpoy Thlbjfx Agnel Year of manufacture 1997, Heidenhain TNC 407 control, Travel X/Y/Z 1016/610/660 mm, 4th axis, 20-position tool changer, SK 40 tool holder, Spindle speed up to 6,000 rpm, Table size 1300 x 600 mm, Coolant system, High-pressure coolant (IKZ) defective, Operating hours 43,000.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 9,675 h, functionality: fully functional, controller model: U100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, number of axes: 3, An optional tool package worth €10,000 can be purchased for €3,500! TECHNICAL DETAILS X-axis travel: 1,050 mm Y-axis travel: 560 mm Z-axis travel: 460 mm Main spindle: 12,000 rpm MACHINE DETAILS Control system: U100M Axes: 3 Tool changer (ATC): 32 SK40 Cutting time: 9,675 h EQUIPMENT Documentation/Manual Speed infinitely adjustable Chip conveyor Coolant system Kdedpfsy S S Nnox Agnsl Preparation for A-axis (4th axis)

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: PC-Fusion-CNC 640M, total height: 2,651 mm, total width: 2,825 mm, table load: 800 kg, overall weight: 6,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 24, tool weight: 8,000 g, product length (max.): 2,915 mm, number of axes: 3, This 3-axis Mazak VTC 200 B was manufactured in 2001. It features an impressive X-axis travel of 1120 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1460 x 510 mm and a maximum table load of 800 kg. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 200 B vertical machining centre we have for sale. Contact us for further details. • Machining capacity: Kdjdpoy S Sw Ssfx Agnel • Milling (S45 JIS): 416 cm³/min • Drilling (S45 JIS): 25 mm • Tapping (S45 JIS): M24 x P3 • Table: • Size: 1460 × 510 mm • T-slots: 5 • T-slot pitch: 100 mm • T-slot width: 18 mm • Table height: 750 mm • Spindle: • Spindle nose to table: Max 690 mm / Min 180 mm • Spindle center to column: 530 mm • Spindle motor: • 10 min: 15 kW • 30 min: 11 kW • Continuous: 7.5 kW • Max torque: 98 Nm • Rapid traverse: • X: 30 m/min • Z: 30 m/min • Cutting feed rate: • X: 8 m/min • Z: 8 m/min • Tool changer: • Tool type: CAT40 • Max tool Ø with adjacent tool: 80 mm • Max tool Ø without adjacent tool: 110 mm • Max tool length: 350 mm • Tool change time (chip-to-chip): 4.7 s • Coolant system: • Tank: 300 L • Pressure: 0.5 kg/cm² • Flow: 20 L/min • Electrical data: • Installed power: 22.7 kVA • Air supply: • Pressure: 5 kg/cm² • Consumption: 140 L/min • Standard equipment: • Full enclosure • Through spindle coolant • Automatic tool length measurement • Adaptive feed control • Tool life monitoring • Tool breakage detection • RS-232C interface • PCMCIA interface • 3.5" floppy disk reader • CE compliant machine • Side chip conveyor preparation • Note: Machine is prepared for a side chip conveyor (conveyor not included) Technical Specification Taper Size ISO 40

Condition: good (used), Year of construction: 2004, operating hours: 6,400 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: TNC 520, table width: 600 mm, table length: 1,200 mm, rotational speed (max.): 10,000 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 24, Vertical BAZ machining center, Maho DMC 103V - NEW SPINDLE Year of manufacture: 2004 Control system: Heidenhain 530 TNC Operating hours: approx. 6,700 hours Technical data: Spindle speed: 1 - 10,000 rpm Drive power: 13 kW Tool holder: SK 40 Number of magazine positions: 24 Travel distances: X-axis: 1,000 mm Y-axis: 600 mm Ksdpfxey S Rlbo Agnsdl Z-axis: 600 mm Direct linear encoder in all axes Table size: 1200x600 mm Accessories: Coolant system Preparation for 3D probe

Condition: excellent (used), DAEWOO MYNX 500 VERTICAL CNC MACHINING CENTER Kjdpfxsy S Alto Agnedl Brand: Daewoo Model: MYNX 500 Type: 3-axis vertical machining center Numerical control: FANUC Series 21-M FEATURES: – Vertical CNC machining center – 3 axes – Complete machine – Number of operating hours: 11,764 h – Table: 1,000 x 500 mm

Condition: used, Year of construction: 2008, 2008 Hardinge Bridgeport XV710 CNC Vertical Machining Centre With Siemens 810D Control Kdodpfx Agsy Sygujnol Table Dimension 760 x 420mm (3 'T' Slots). 'T'-Slot Dimension 16mm. Maximum Table Load Approx 450kg. Axis Travel 'X'=711mm, 'Y'=457mm, 'Z'=457mm. Spindle Nose To Table Min/Max 150-580mm. Rapid Traverse 'X'=36m/min, 'Y'=36m/min, 'Z'=36m/min. Maximum Cutting Feedrate 12,000mm/min. Maximum Spindle Speed 10,000rpm (10HP Motor). Spindle Taper ISO 40 BIG-Plus. 20 Position ATC. S/No. 080011WM (2008). With Coolant System, Renishaw NC4 Laser Tool Presetter, Filtermist FX4000 Mist Extraction Unit, Signal Tower, Lubrication Grease (Direct Drive). & Handwheel. Weight 3,900kg.

Condition: excellent (used), Year of construction: 2013, 2013 Quaser MF400 5 Axis CNC Vertical Machining Centre with Tilting Rotary Table with Siemens 828D CNC Control Kdodpfx Agjy Sya Uenol Tilting Rotary (Trunnion) Table Dimension Ø320mm (4 'T' Slots). Maximum Swing Ø400mm. Maximum Table Load 100Kg. Axis Travel 'X'=410mm, 'Y'=610mm, 'Z'=510mm, 'A'=+30/-120Deg, 'C'=360deg. Rapid traverse 'X/Y'=36 m/min, 'Z'=25m/min. MAximum Cutting Feedrate 20m/min. Maximum Spindle Speed 15,000rpm (Motor 15/20HP). Spindle Taper BT40. ATC Capacity 30 Tools. Maximum Tool Ø76mm (Ø125mm non Adjacent Tools), Maximum Tool Length 280mm. S/No. (TBC) (2013) With Through Spindle Coolant, Filtermist FX6002 Mist Extraction Unit, Renishaw Spindle Probe Interface, Hand Wheel & Signal Tower. Note: Tooling & Work Holding Not Included.

Condition: like new (used), Year of construction: 2017, operating hours: 1,494 h, functionality: fully functional, Control: DOOSAN-FANUC i Series Table dimensions: 1300 x 570 mm T-slots on the table: 4 x 125 x 18H8 Max. table load: 1000 kg X-travel: 1050 mm Y-travel: 570 mm Z-travel: 510 mm Max. spindle speed: 12000 rpm (Direct drive) Taper: BT40 Rapid traverses X/Y/Z: 36 / 36 / 30 m/min Feed rates: 1 - 15000 mm/min Drive power: 18.5 / 11 kW Power requirement: 400V / 50-60 Hz / 32A Weight: 6500 kg Dimensions LxWxH: 2960 x 2372 x 2800 mm Accessories, Equipments - Chip conveyor - Coolant system - Spindle chiller - RENISHAW tool setter - RENISHAW workpiece probe without touch probe Kdjdpfxsy Smdao Agnjl - Signal tower - 15-20 pcs of BT40 tool holders + pull stud and cutting tools - Transformer The machine was barely used. It produced parts for Jet-Skies (mostly plastic parts). Very nice machine. It is ready to buy. Under power in our showroom in Hungary.

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,100 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 600 mm, controller manufacturer: FANUC, controller model: 18 iMB, total height: 3,100 mm, total width: 2,300 mm, table load: 1,500 kg, overall weight: 7,200 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, product length (max.): 3,100 mm, number of axes: 3, This 3-axis TOYODA FV 1165 was manufactured in 2008. It features a spindle speed of 12,000 rpm and a robust table size of 1300 x 650 mm, with a maximum table load capacity of 1,500 kg. The machine is equipped with a FANUC 18 iMB control and has a tool capacity of 30 tools. If you are looking to get high-quality CNC milling capabilities, consider the TOYODA FV 1165 vertical machining center we have for sale. Contact us for further details. • Application: CNC Milling / Precision Machining • Max torque: 117 Nm • Tool magazine capacity: 30 tools • Tool interface: BT40 Big-Plus Kodpfoy Shb Tjx Agnodl • Table size: 1300 x 650 mm Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 560 mm, controller manufacturer: FANUC, controller model: Oi-MF Plus, total height: 2,700 mm, total width: 2,710 mm, table load: 700 kg, overall weight: 5,800 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 24, tool weight: 8,000 g, product length (max.): 2,900 mm, number of axes: 3, This 3-axis Neway VM-1150S was manufactured in 2019. It features an X-axis travel of 1000 mm, Y-axis travel of 550 mm, and Z-axis travel of 560 mm. The machine includes a robust table size of 1100 x 550 mm and a maximum table load of 700 kg. If you are looking to get high-quality machining capabilities, consider the Neway VM-1150S vertical machining centre we have for sale. Contact us for further details. • Table size: 1100 x 550 mm • Distance spindle nose to table: 120–680 mm • Rapid feed (X/Y/Z): 36 m/min • Coolant through spindle: 20 bar • Tool magazine capacity: 24 positions • Max tool diameter: 80 mm • Max tool length: 300 mm Ksdpfoy Sg A Njx Agnjdl Additional equipment • Chip conveyor • Remote electronic handwheel Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 2005, FOR SALE VERTICAL MACHINING CENTER QUASER MV154P/12 Condition: Used Brand: QUASER Machine Tools, Inc. Model: MV154P/12 Year: July 2005 CNC Controller: FANUC 18i-MB. Spindle speed: 12,000 rpm (Series /12). Origin: Taiwan. Serial number: 51C0391. Machine weight: 6,400 kg. Floor space: 235 cm (Length) x 220 cm (Width). Overall height: 275 cm. Travel (indicative for this model): Approx. 1020 x 530 x 560 mm. Fanuc Reliability: Fanuc 18i-MB system Speed: "P/12" version ideal for tasks requiring high spindle speed and fast dynamics. Kdodpfx Agoy Sgbxjnol

Condition: used, Year of construction: 2012, x-travel 1067 mm y-travel 610 mm z-travel 610 mm Kodoy Sblljpfx Agnsdl control WinMax (max4) weight of the machine ca. 6350 kg

Condition: used, Year of construction: 2008, AWEA BM - 1200 Machining Center CNC control Fanuc Series 0i-MC TRAVELS: X axis travel mm 1200 Y axis travel mm 600 Z axis travel mm 600 Kodpjy R I U Dofx Agnsdl Distance spindle nose/table surface mm 125:725 Distance spindle center/column mm 640 TABLE: Table size mm 1300x600 T-slots (width x number) mm 5x18 Max table load Kg 1200 SPINDLE: Spindle taper ISO 40 Spindle speed rpm 40-8000 Spindle motor power (cont./S6-40%) kW 7.5/11.5 AUTOMATIC TOOL CHANGER: Tool magazine capacity 24 positions Max tool diameter (with adjacent stations full/empty) mm 90/150 Max tool length mm 250 Max tool weight Kg 8 MACHINE WEIGHT & DIMENSIONS: Total required power kVA 25 Approx. machine weight Kg 7500 Approx. overall machine dimensions mm 3400x2200x2320H EQUIPPED WITH: -Through spindle coolant 15 bar with separate tank and filtration system -Chip conveyor YEAR OF FIRST INSTALLATION 2008

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 12,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 12,000 rpm, Fanuc MXP200 travels 1600x800x800 mm spindle BT40 maximum spindle speed 12,000 rpm tool changer for 30 tools center spindle coolant 20 bar Ksdpfx Agoy R Ddzsnsdl chip conveyor

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN TNC 426 P, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,020 mm Travel Y-axis: 510 mm Travel Z-axis: 500 mm Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 25 m/min Workpiece weight (max.): 900 kg Spindle speed (max.): 10,000 rpm Spindle taper: ISO 40 Spindle power: 19 kW Clamping surface: 1,150 x 490 mm T-slots: 5 at 100 mm pitch Number of tool magazine positions: 30 Tool change time: 3.5 sec Max. tool weight: 6 kg Kodsy R Am Uepfx Agnjdl Max. tool length: 250 mm Max. tool diameter: 80 mm MACHINE DETAILS Control: HEIDENHAIN TNC 426 P EQUIPMENT Chip conveyor Operating manual CE Declaration of Conformity

Condition: ready for operation (used), Year of construction: 2019, operating hours: 6,048 h, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 530 mm, controller manufacturer: HEIDENHAIN, controller model: TNC620, total height: 3,000 mm, total width: 2,600 mm, table width: 540 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,600 W, number of slots in tool magazine: 30, product length (max.): 3,000 mm, number of axes: 3, This 3-axis DOOSAN VM 5400 was manufactured in 2019. It features an impressive X-axis travel of 1020 mm, Y-axis travel of 540 mm, and Z-axis travel of 530 mm. The machine includes a robust table size of 1200 x 540 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VM 5400 vertical machining centre we have for sale. Contact us for further details. • Spindle taper: DIN 69871 • Max. spindle torque: 165.5 N·m • Spindle cooling: VM-series standard • Tool magazine: Side-mounted ATC, cam-type • Machine hours: • Control on time: 13,616 h • Machine on time: 12,530 h • Program run time: 6,963 h • Axis motion time: 5,900 h • Spindle S1 time: 6,048 h Additional equipment • Workpiece probe installed • Tool length measurement probe installed Technical Specification Taper Size ISO 40 Kdodpfey Rrtwsx Agnol

Condition: ready for operation (used), Year of construction: 2007, operating hours: 16,664 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 526, table width: 600 mm, table length: 1,200 mm, table load: 900 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Bridgeport XR 1000 vertical machining centre was manufactured in 2007. It features an X-axis travel of 1000 mm, Y-axis travel of 600 mm, and Z-axis travel of 600 mm. The machine is equipped with a high-speed spindle capable of 12,000 rpm and a side-mounted automatic tool changer with a capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the Bridgeport XR 1000 machine we have for sale. Contact us for further details. • Spindle taper: ISO 40, MAS-BT 40 • Tool setting: Tool length setting probe • Tool changer type: Side-mounted automatic tool changer • Machine condition: Fully functional, excellent running condition • Spindle bearings: Rebuilt in 2023 Technical Specification Kedpfx Agsy Rrgqsnsdl Taper Size ISO 40

Condition: used, Year of construction: 2001, total height: 2,550 mm, total length: 2,850 mm, total width: 2,400 mm, Colour: White Empty weight: 6.500 kg - Year: 2001 - Documentation available: No - CE certificate present: No - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Heidenhain - Control system type: TNC 430 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 500 - Z-axis travel [mm]: 505 - Table length [mm]: 1150 - Table width [mm]: 470 - Tool holder: BT40 - Max. spindle speed [rpm]: 10000 - Options: Tool magazine, Chip collection tray Kodjy Rrdispfx Agnjdl - └ Tool magazine [pcs.]: 24 - Transport dimensions: 2850mm x 2400mm x 2550mm (l x w x h) - Transport weight [kg]: 6500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum