Emmegi, Ciemme Grafite Elektra 550 in a very good condition.
The saw ran with us from 2002 - 2006 in the one-shift operation, afterwards
only 3-4 times a month. Maintained throughout.
The cutting range is from 22,5° to 157,5°.
Short cut
Byqil3z8mt
Oversize cut
Double cut possible
Bar cut / clocking for corner angles
work piece width:600 mm
workpiece height:300 mm
drill diameter:10 - 40 mm
number of drill axes:3
Measurement saw band:6175 x 41 x 1,3 mm
cutting speed:15 - 100 m/min
The Kaltenbach KBS 620 DG-KD 615 saw-drill line consists of a horizontal band saw Kaltenbach KBS 620 DG and a 3-axis CNC beam drilling line type Kaltenbach KD 615. This drill saw line is best suited for the economic sawing, drilling, center-marking and threading of profiles and flat steel bars in medium-sized steel construction an...
cutting length: min./max. bei 90° 330/5000 mm
disk of circular saw-Ø: 450/500 mm
min. cutting length at 90°: 330 mm
Jj2tjwgoy
space needed: 6760 x 1590 x 1700 mm
weight: 1550 kg
Double miter saw Rapid Model DGL 220 for cutting aluminum, wood and plastic profiles with automatic positioning of the saw heads.
Cutting length max - 7000 mm
Swivel range continuously motorized 20 ° to 135 °
Cutting height at 90 ° - 340 mm
Pdxqd
Cutting height at 45 ° - 360 mm
Cutting width 170 mm
Saw blade diameter 2 x 500 mm
Saw blade speed 2800 / min
Reinforced motor power 2 x 3 kW
Saw feed speed adjustable with oil brake
Spraying device
2 vertical clamps + 2 horizontal clamps and...
cutting length 4000mm
Saw blade diameter 450mm
Ztzvn0uz
Position detection of the movable aggregate via direct measuring system with magnetic tape
2 HM saw blades
Pneumatic full protection hoods over the cutting area
Two horizontal and vertical clamping devices with low pressure safety device
Profile support roller conveyor
Cuts with saw blades ø 450 mm in the mitre range from 22°30' (external) to 90°
Manual profile support
Pre-equipment for automatic start of chip extraction device MG4
incl. th...
Metal Double Miter Saw IRONCUT/MDS350
The metal double miter saw MDS350 enables the fast processing of steel profiles. The steel is cut precisely on both sides with a 370 mm saw blade. Infinitely variable feed rates enable an optimal cutting result with a minimal cycle time.
Why Choose WEGOMA?
- Strong frequency-controlled motors
- Infinitely variable feed
- Automatic positioning and tilting of the saw units
- Safety fence and light strip included in the standard scope of delivery
- Automated ...
Sold is a double mitre saw taken out of the current plastic production.
Manufacturer: Elumatec
Model: DG 204
Electrical connection: 400V at 50 HZ
Saw blade diameter: 550mm
Compressed air connection: 8 bar
Speed: 2800 1/min
traverse path: 6m
cutting angle: 45° + 90° degrees
All data without guarantee under reservation.
Byhaaqcogg
Sale without guarantee and warranty
work piece width:600 mm
workpiece height:300 mm
drill diameter:10 - 40 mm
number of drill axes:3
Measurement saw band:6175 x 41 x 1,3 mm
cutting speed:15 - 90 m/min
The Kaltenbach bandsaw KBS 620 DG year 2001 and beam drilling machine Kaltenbach APS 615 year 2000 is a combination as saw-drill line with transport system.
The band saw is equipped with an inclined cutting device and is suitable for sawing steel construction profiles.
The saw band dimension of the KBS 620 DG is 6175 x 41 x 1,3 mm,...
cutting length: 5000 mm
disk of circular saw-Ø: je nach Bedarf 420 - 500 mm
space needed: 6400 x 1400 x 1700 mm
weight: ca. 1600 kg
Tf3stl
Cutting saw for wood, aluminium and plastic profiles, double mitre saw for special angles from 20 to 135 degrees stepless motorized
A video of the running machine can be sent on request.
Positioning control PCE 5000 with colour screen, for single cuts and program cuts, profile data and cutting data records can be stored.
The machine is equipped with many extras.
cutting length approx. 5100mm with software stop overlength by reaching around
Software stop for short parts
Swivel range from 20 degre...
cutting length 5200mm
Saw blade diameter 350mm
The Twin Ferro is a double mitre saw with frontal movable saw blades for sawing steel and stainless steel profiles. By using servo - motors it is possible to position both sawing units at right angles to 45°, 90°, + 135° and on all vertical mitres with a precision of 240 intermediate positions per degree.
The movement of the sawing unit is automatic and electronically controlled on guides that guarantee the machine high dimensional accuracy and stab...
Double mitre saw
Manufacturer: Haffner
Type: DGS 189
Year of manufacture: 1989
cutting length: 3.930 mm
Bw3qvkoei9
cutting height: approx. 100 mm
Power: 2 x 2,2 kW
speed: 2.800 rpm
Saw blade diameter: 300 mm
Tiltable: yes
Tiltable: yes
Clamping: Pleumatic cylinder
Cutting range round / square 90°: 255 mm / 210 x 210 mm
Cutting range flat 90°: 310 x 210 mm
Cutting range round / square 45°R: 220 mm / 210 x 210 mm
Cutting range flat 45°R: 220 x 200 mm
Cutting range round / square 45°L: 230 mm / 200 x 200 mm
Cutting range flat 45°L: 230 x 200 mm
Cutting range round / square 60°R: 135 mm / 135 x 135 mm
Cutting range flat 60°R: 135 x 135 mm
working height: 930 mm
saw blade dimensions: 2750 x 27 x 0,9 mm
cutting speeds: 35 / 70 m/min
Coolant pump: 100 W
Motor ou...
work piece width:600 mm
workpiece height:300 mm
drill diameter:10 - 40 mm
number of drill axes:3
Measurement saw band:6175 x 41 x 1,3 mm
cutting speed:15 - 100 m/min
The Kaltenbach KBS 620 DG-KD 615 saw-drill line consists of a horizontal band saw Kaltenbach KBS 620 DG and a 3-axis CNC beam drilling line type Kaltenbach KD 615. This drill saw line is best suited for the economic sawing, drilling, center-marking and threading of profiles and flat steel bars in medium-sized steel construction an...
GEMINI - II A
Iyjeni9p
Semi-automatic, digital twin-head cutting-off machine, 2x blade Ø 400 mm, twin-cutting
APPLICATION:
For cutting aluminium, plastics and wooden profiles
MAIN FEATURES:
- Hydro-pneumatic cutting
- Safe cuts thanks to the fitting of a cover.
- Manual positioning at all stages between -45° and +45°
- 0°, 15°, 22.5°, 30°, 45° right and left fixed angles - quick manual adjustment
- Automatic positioning of cutting length
- PLC control system
- Possibility of storing dimensions
...
The solid cast construction with integrated turn table ensures optimal profile support for cutting to length with angular accuracy
Continuous pivoting range adjustment of the saw heads from 0° to 45° to the left and right. This makes external and internal dimension cuts possible
Vertical and horizontal pneumatic material clamping units ensures optimal profile fixation
Equipped with saw blades as standard
Equipped with digital display E 111 as standard
Pulsed coolant system
Cutting length varia...
- please also see the attached brochure -
Double mitre saw with 3 controllable axes with automatically moving sawing unit and electronic control of all mitres from 45° (inside) to 15° (outside) with an accuracy of 280 intermediate positions per degree.
cutting length 5000mm
Saw blade diameter 550mm
incl.
Gfd0bwin
optional clamping devices
moving roller conveyor
Software for overlength and underlength cutting, cross-cut, wedge cut
Driver for connection to external calculation programs
Preparation...
Optimum Optisaw SD 500
Double mitre metal band saw
with swivelling saw bow
Art. no. 3292380
length approx. 2122 mm
width/depth approx. 1046 mm
Height approx. 1497 mm
Bq2grblqhy
Weight approx. 522 kg
Electrical data
Motor power coolant pump 100 W
Total connected load 3.8 kW
Supply voltage 400 V
Mains frequency 50 Hz
Machine data
Saw band speed(s) 35 / 70 m/min
Saw band length 3770 mm
Saw band width 34 mm
Saw band thickness 1,1 mm
Cutting angle 45 - -60 °
Feed Hydraulic via lowering cylinder
Lifti...
* Mitre left 60° + right 45
* hydraulic vice
* Material button (reduction of the cycle time)
* Additional function: Move saw frame at standstill via lift/lower switch
* solid vice, cutting pressure feed regulator
* Amperemeter = display for optimum cutting settings and saw blade wear
* Machine base frame with automatic cooling system and removable chip tray
Cxpbffv
technical data:
* Cutting speed 37+74 m/min
* Motor 400V 50Hz 1,1 / 1,3 kW
* saw blade dimensions 2965x27x0,9mm
* Weight 310 kg
cutt...
Engine type:
automatic aluminium double mitre sawing machine,
Control: Beckhoff P10-L with digital display,
max. cutting length for double cut: 4000 mm,
Saw blade Ø: 500 mm,
Cutting height: max. 230 mm,
Cutting width: max. 150 mm,
Drive: 2 x 2.2 kW,
Remark:,
Mitre cuts up to 45° adjustment el./pneum..,
J9nvzb
el./pneum. material clamping vertically and horizontally,
Coolant system,
Roller conveyor 4400 mm,
Weight: 1000 kg,
Double mitre saw
Image
Technical data
Article number: MA917
Manufacturer: Elu
Type: DG 79
Year of construction: 1981
Machine number: 27184
Weight [kg]: ca. 550
Power supply: 380V / 2x2KW
Gear [RPM]: 2100/3800
Saw blade diameter: 330
Cutting range: 0-45 ° / 4500 mm length
Length stop: adjustable by hand
3whvjh8d
Accessories: Pneumatic clamping
for aluminium and plastic profiles
Saegeblatt-Ø 350 mm
Cutting length 4000 mm
Cutting areas:
Flat profiles straight cuts 180 x 80 mm
mitered 120 x 80 mm
Angle 180 x 80 mm straight cuts
mitered 120 x 90 mm
Pipes straight cutting Ø 110 mm
mitered Ø 110 mm
Solid material ø 80 mm
Blade RPM 1700/3400 RPM
Engine power 1.8 / 2.6 kw
Lxxbmzdc
1450 / 2860 RPM
Weight approx. 900 kg
Cutting length 5,350 mm
Saw blade diameter maximum 325 mm,
swivel range: 90° - 45° pneumatic
with hydropneumatic saw feed
vertical workpiece clamping
Nnmrj7az
automatic positioning control
traversing speed approx. 20m/min
roller conveyor moving with the right sawing unit
2 HSS circular saw blades 325 mm diameter
software for overlength and underlength cuts and cycle cuts
6500 mm jaw feed
Remaining piece flap
strip deviation control
Micronizer
SLE 600
Extension version M330 3M
Vertical roller VR-M
H8mnl8f
Remaining piece remover
DSTV interface
-Saw blade size 300 mm
-Blade rotation speed 2800 RPM
-Section - 90 ° 160 x 20 mm
-100 x 80 mm
-at 45 ° 100 x 40 mm
-Adjustable miter vise
-Drive 380 V / 1,5 kW - space requirement approx. B H 400 x 1400 X 700 mm
-Weight 80 kg
-with:-vert. -Vice - machine stand
-Feed roller 2000 mm
-Evacuation roller conveyor with degree stop-analog display via Handwheel movable 3100 mm
Eqp2xk32
GEMINI IV SA
Semi-automatic, digital twin-head cutting-off saw, 2 x blade Ø 450 mm
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to the cover with safety sensor
- Manual positioning on all steps between 45° and 90°
- Batch processing and precision cutting
- Programming process and large memory
- Automatic calculation of the cutting length
- PLC control system
- Cutting capacity of 4000mm and 6000mm profiles with built-in...
Double mitre saw
Eisele
VMS ALD
BJ 1967
Power 2,2 KW
Clamping - Sawing = Pneumatic
Saw was used in window construction.
Buk20jzzjx
Blades 420mm
Automatic lenght setting and angle
Bwadkbgwjw
The machine was used for cutting aluminum profiles and is functional. More information on request.
Buakb3wuam
Manufacturer: EBG-TECH
Type: BMW N-63
Year: 2008
Max. disk diameter: 300 mm
Ojigv
Overall size: 1900 x 1200 x 2900 mm
Weight: 1750 kg
FOM Industrie Double Head Saw STEEL 35
Budww730i9
350 mm disc
Minimal Lubrication system
Head activation on panel, possible to cut only with left head, right head or both
6 pneumatic clamps
GEMINI V R - disc extension up to 185mm
Fully automatic, digital twin-headed angle saw, blade Ø 550 mm
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Hydropneumatic cutting
- slice function
- Safe cuts thanks to the cover with safety sensor
- Automatic positioning on all degrees between -22.5 ° to + 45 ° with servo system
- Batch processing and precision cutting
- Programming process and large memory
Nvkeh
- Automatic calculation of the cutting length
- Touch con...
Distance between saws at 90°max : 4000 mm
Cutting height at 90° : 200 mm
Cutting with: 130 mm
Vf2zkzs
Power: 5,1 kW
Weigth: 1260 kg
GEMINI VI
Automatic, digital twin-headed, 2x Ø 600 mm automatic angle saw blade
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to the cover with safety sensor
- Automatic positioning on all degrees between -22.5 ° to + 45 ° with servo motion system
- Adjustable disc extension
- Touch control panel
- PLC control system
- Cutting capacity of profiles from 410mm to 5050mm (between heads), max. profile length in loading 8000m...
GEMINI V SA - disc extension up to 185mm
Semi-automatic twin-headed saw blade, blade:2 x Ø 550 mm
APPLICATION:
For cutting aluminium, plastics, wood
MAIN FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to the cover with safety sensor
- High-speed positioning in steps 22.5°, 45° to 90°
- Manual positioning of any intermediate angle within the available span range
- Precision cutting
- Maximum internal angle 90 degrees, maximum external angle -22.5 degrees
APPLICABILITY TO SELECT THE TYPE OF...
GEMINI X (disc extension up to 418mm)
Automatic radial bi-head cutting-off saw,
2x Ø 550 mm blade with large cutting range
APPLICATION:
For cutting aluminium, plastics
MAIN FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to the cover with safety sensor
- Automatic positioning on all steps between 30° and 90° with servo motion system
- Adjustable disc extension
- Touch control panel
- PLC control system
- Cutting capacity of profiles from 450mm to 6000mm (between heads), maximum profile len...
GEMINI IV M - Two-headed manual saw for cutting aluminium, PVC and wood
As standard:
- 2x 450mm disc,
- the conveyor on the moving head on the right,
- the cooling system,
- horizontal clamps
- hydropneumatic cut,
- guards protecting the cutting area with sensor
Vsyzsy
security
- manual angle positioning in the range between 45-90
degrees
- horizontal clamps
- support profile
For a surcharge:
- conveyor on fixed head
- vertical clamps
- chip extraction
The price given is the net price.
12-mo...
Used Double mitre box saws
Completely search Machineseeker and more than 200,000 used machines now.This may be of interest to you
Olympic Games: Machineseeker sponsors Team Germany
Photo gallery: The World's 10 biggest excavators
Sell now on Machineseeker! Over 220,000 inquiries per month
10 valuable tricks for buying used machines online
Morlock Motors official partner of Machineseeker and Truckscout24
How to receive 100% of our e-mails
