Used pumps for sale (186)

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: C115101, Four CSF Inox (Italy) hygienic centrifugal pumps, year 2021, professionally decommissioned from an INEOS production facility by qualified engineers. In service for under 12 months — excellent, near-new condition. Four pumps available across three models: Dolhcozmt Ufecqqocn 1 x CS 32-110-2-1/BD — 0.75 kW, 1–12 m³/h at 1.6 bar, 1.5" tri-clamp 2 x CS 32-145-2-1.5/BD — 1.1 kW, 1–13 m³/h at 2 bar, 1.5" tri-clamp 1 x CS 50-175-2-10/BD — 7.5 kW, 1–54 m³/h at 4.1 bar, 2.5" inlet / 2" outlet tri-clamp All units: 316L stainless steel, 6-vane open impeller, EHEDG/3A hygienic design. ATEX pump II 3G Ex h IIB T4...T3 Gc with Orange1 Ex db IIC T4 Gb flameproof motors, IP66, inverter duty. Suitable for solvent, fragrance, cosmetics, food, beverage and pharmaceutical duties in hazardous areas. Available individually or as a set. Tracht Ltd supplies hygienic and sanitary process equipment. Viewings by appointment; collection and delivery can be arranged. Sold EXW Manchester, UK. Price on request. Please send an enquiry for individual quotes or a package price for the full set — we respond quickly.

Year of construction: 2013, condition: excellent (used), Scheugenpflug DOS P016 Piston Dispenser Piston dispensing system DOS P for a wide range of requirements The piston dispensing systems from Scheugenpflug operate according to the principle of volumetric dispensing, meaning that the dispensed material volume is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting compound via the corresponding material feed system. When a two-component medium is used, the volume of the two cylinders simultaneously determines the ratio of the resin and hardener components to each other. The dispensing pistons push the two components simultaneously through separate channels towards the outlet valve, where they first mix into a homogeneous reactive medium in the static mixing tube. Dcslhccqozc Nplsqsn The DOS P016 / TCA piston dispensing systems are highly precise volumetric dispensing systems designed for processing 1K and 2K materials and cover a wide range of requirements. Precisely dimensioned dispensing cylinders enable the dispensing of reproducible material volumes. In the case of 2K materials, the parallel emptying of both cylinders into the common mixing tube creates a consistently constant mixing ratio at all times, thus ensuring the highest process reliability. At the same time, pressure-, moisture-, or shear-sensitive potting compounds can also be handled gently without any fear of material changes. Users also benefit from simple and fast maintenance, high uptime, and significantly reduced maintenance costs. With optional features such as valve monitoring, mixing tube heating, or dispensing head heating, these systems can be flexibly adapted to the respective application. Your advantages No dependence of dispensing accuracy on temperature, pressure, or viscosity Consistently constant mixing ratio at all times due to parallel emptying of the dispensing cylinders Wide range of applications (in terms of materials and applications) Important functions Simultaneous extrusion of the cylinders by a common drive mechanism enables a homogeneous mixing ratio Sensor-based monitoring of the inlet and outlet valves as well as the cylinder filling level Temperature control of the material via mixing tube heating (optional) Dispensing needle monitoring with camera (optional) Product data General Materials: 1K and 2K Viscosity: From liquid to highly viscous Fillers: Filled and/or abrasive media Operating principle: Volumetric dispensing Properties Constant mixing ratio for 2K Independent of temperature, material feed pressure, and viscosity of the casting resin Exactly reproducible and highly precise results Highest process reliability Application Potting, sealing, bonding, application of thermally conductive materials, encapsulation (Glob Top) DOS P016 Max. volume/shot 2K at ratio 1:1 1K: 0.06/17 ml 2K: 0.1/32 ml Dispensing speed max. 1 [ml/s]: 2 Dispensing accuracy at max. stroke [%]: < 0.5 Heatable up to max. 2 [°C]: 80 Outlets: 1K: 1-4, 6, 8 2K: 1-4 Weight: 14 kg Dimensions (W x H x D) 290 x 350 x 230 mm Video on how it works "Everything from one source: We will gladly offer you suitable bank financing for your project." More dispensers - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: 100166696, AHLSTAR pump APP43-300 S Centrifugal pump with mounting frame, motor not included. Djloxg Nxaohccqqscn

Condition: excellent (used), SCA air-powered piston pump SCA PPK57-200P8-R-E Max. temperature: 100 °C Material pressure: 350 bar Doljwxw U Aehccqqocn Capacity: 200 l Dimensions: 1050 x 650 x 2000 mm You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), PUMP AND VALVE ASSEMBLY FROM A WOOD TREATMENT AUTOCLAVE For sale, a complete pump assembly originating from an industrial wood treatment plant using an autoclave. The set was used in a vacuum-pressure wood treatment plant. The assembly includes, among other things: - a large industrial pump with an electric motor, - an additional vertical pump, - process tanks, - an extensive piping system, - flanged valves, - pneumatically controlled valves, - automation and control elements, - sensors and measuring equipment, - a steel support frame. The entire assembly is a component of the technological installation of the autoclave for wood treatment. This type of system is used to carry out the individual stages of the impregnation process, including vacuum creation, transport of the impregnating agent, and the pressure phase. In industrial impregnation plants, separate vacuum pumps, pressure pumps, and circulation/transfer pumps are used. The components bear markings indicating the manufacturers of the individual parts, including Sulzer and Actreg/Actreg Valves. Used, industrial condition. Visible signs of use, wear on the paint coating, and localized surface corrosion. Dcolhccsz Hrnboqqen Sold as seen in the photos. Individual components are not sold separately – the offer applies to the entire assembly shown. Inspection is possible on-site before purchase. Due to its size and weight, collection is required or transport must be arranged by the buyer.

Year of construction: 2024, condition: used, Audoli & Bertola / Gruppo Aturia VHL 382/2 Industrial Vertical Pump with ABB 110 kW Motor Heavy-duty industrial vertical pump manufactured by Audoli & Bertola, a division of Gruppo Aturia S.p.A., complete with a large ABB electric motor. The pump's nameplate indicates a manufacturing date of 11/2024. Pump specifications: Manufacturer: Audoli & Bertola Division: Gruppo Aturia S.p.A. Type: VHL 382/2 Capacity: 317 m³/h Head: 28 m Speed: 1450 rpm Power: 110 kW Year: 11/2024 CE marked Configuration: Vertical industrial pump Large flanged connections ABB electric motor: Manufacturer: ABB Type: M3BP 315SMA 4 V1 Power: 110 kW Dcolhcjz Di Nwecqqon Year: 2003 Frequency: 50 Hz Speed: approx. 1486–1488 rpm Protection class: IP55 Insulation class: F Duty: S1 Product code: 3GBP312210-BDG Vertical mounting configuration The pump is offered as a complete assembly with the ABB 110 kW electric motor, as shown in the pictures. Condition: Used industrial surplus Location: Rotterdam, The Netherlands The equipment is available from stock and can be inspected before purchase. This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for further information or to submit an offer.

Condition: good (used), SCA pneumatically driven piston pump Max. temperature: 100 °C Material pressure: 350 bar Dimensions: H x W x D 2400 x 1200 x 800 mm Dcslowxw R Rjhccqqsn You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: SNDE106744, input voltage: 400 V, input frequency: 50 Hz, Vacuum casting system was used to cast epoxy resin into plastic housings Dcslsvnrz Dshccqqsn

Condition: used, Used Flowserve type 600LNN975 centrifugal pump. Unit is rated 4,250 m3/hr at 33.5m head, 595 rpm. Unit rated 16 bar maximum pressure at -15 to 25 deg.c. temperature. Casing is carbon steel (A216 Gr. WCB), shaft is carbon steel (EN10083-C35E) and impeller is austenitic stainless steel casting alloy(A743 Gr. CF-8M). Unit driven by ABB electric motor rated 1000kW, 593rpm. Unit is mounted on mild steel frame. Dcolhccqezbuggoqon Additional information available upon request.

Condition: used, Used Flowserve type 350LNN725 centrifugal pump. Unit is rated 1,800 m3/hr at 37.4m head, 740 rpm. Unit rated 14.9 bar maximum pressure at -30 to 25 deg.c. temperature. Casing is cast austenitic stainless steel (ASTM A744 Gr, CF-8M), shaft is stainless steel (EN 10088 X2CrNiMo17-12-2) and impeller is cast austenitic stainless steel (ASTM A744 Gr, CF-8M). Unit driven by ABB electric motor rated 315kW, 744rpm. Unit is mounted on mild steel frame. Dcelhszbugteccqqsn

Condition: good (used), KSB Etaline GN Pump Inline pumps and three-phase standard motor with a motor-mounted frequency inverter for stepless speed control. Applications: Heating systems Air conditioning systems Cooling circuits Domestic water systems Water supply Industrial circulation systems Medium: Liquids that do not chemically or mechanically attack the pump materials. Operating data: 1450 rpm Design: Block pump in an inline design, with a speed-controlled standard motor; the pump and motor shafts are rigidly connected. Bearings: Deep groove ball bearings, grease-lubricated. Shaft seal: Uncooled and maintenance-free mechanical seal according to EN 12 756. Drive: Surface-cooled three-phase standard motor with a motor-mounted frequency inverter and radio interference filter according to DIN EN. Pump series: Etaline Material combination: Gray cast iron Standard motor and stub shaft Frame size designation: 65 Nominal size of suction/discharge nozzle: 160 Item condition: used Dcelhccqoivd Dkoqen

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 358143, Hydra-Cell G10XKSGSFEMB diaphragm high pressure pump with 4 kW motor, build in inverter, manual control unit (on/off and speed), external cooling and 34,5-69 bar over pressure valve. Possible to switch to different control modes and ramps through DIP switches. Model: G10 X: Standard high-pressure performance K: Kel-Cell version S: 316L pump head G: Vition/FKM Diaphragm and O-ring S: 316L valve seat F: 316L valves Dolhccqjzv Ibfeqecn E: Elgiloy valve springs M: Kynar/PVDF valve spring retainer B: 10W30 motor oil 30,6 liter/min (1,8 m3/h) at 1450 RPM. 69 bar (1000 psi) at 1450 RPM and 103 bar (1500 psi) at 790 RPM. Max inter pressure of 17 bar and 121 degree celcius maximum fluid temperature. Able to handle solid particles up to 500 microns (0,5 mm) It has a crack in the back left mounting foot (see picture)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Refrigerant pump station, complete with a control cabinet, pumps, and connecting fittings. The entire unit is mounted on a steel platform. Available for sale as a complete set or in individual components. Pumps with a capacity of 60 m3/hour are also available separately. Dcolezu R S Dohccqqsn

Condition: excellent (used), KSB ETB050032200 Volute casing pump Dcjlhex Ai N Reccqqjn Etabloc single stage volute casing pump in closed coupled design, with KSB pump drive and frequency inverter, brand new in box, with manuals, see plates for full spec

Condition: new, Wilo Dry-Running Pump IPN50/180-7.5/2 AT, DN50 PN 16, Art. 307833 /2120882 Wilo Dry-Running Pump IPN50/180-7.5/2 AT, DN50 PN 16, 7.5 kW Dcsloivdz Nshccqqsn Max. 140 °C 2900 RPM Art. 307833 /2120882 The data listed below is identical to our previous model. Order Information Manufacturer Wilo Product Designation CronoLine-IL 50/180-7.5/2 Net Weight approx. 106 kg Article Number 2120882 Operating Data Conveyed Medium Water Medium Temperature T -20 °C Ambient Temperature T -15 °C Maximum Operating Pressure PN 16 bar Design Note 16 bar up to 120°C, 13 bar up to 140°C Minimum Efficiency Index (MEI) Hydraulic Data Minimum Efficiency Index (MEI) Max. Operating Pressure p 16 bar Maximum Operating Pressure PN 16 bar Min. Medium Temperature Tmin -20 °C Max. Medium Temperature Tmax 140 °C Max. Ambient Temperature Tmax 40 °C Design Note 16 bar up to 120°C, 13 bar up to 140°C Motor Data Mains Connection 3~400 V, 50 Hz Voltage Tolerance ±10 % Motor Efficiency Class IE3 Motor Rated Power P2 7.50 kW Rated Current IN 13.30 A Rated Speed n 2900 1/min Power Factor cos φ Motor Efficiency ηM 50% 88.9% Motor Efficiency ηM 75% 90.3% Motor Efficiency ηM 100% 90.1% Motor Winding up to 3 kW - Motor Winding from 4 kW - Insulation Class F Motor Protection Type IP55 Motor Protection No Materials Pump Housing 5.1301/EN-GJL-250 KTL-coated Impeller EN-GJL-200 (GG-20) Cast Iron Shaft Stainless Steel Mechanical Seal AQ1EGG Lantern 5.1301/EN-GJL-250 KTL-coated Condition: "New". Pumps from stock. Some are without the original box. May have dirt or storage marks/small dents. Unused, they appear good at the bores. There are no mounting marks. See pictures. Shipping with special/package/freight shipping. P4 More articles – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 2017, condition: good (used), Manufacturer: PCM Type: M 6C12S Dolhceztvpfscqqscn Year of manufacture: 01/2017 (used sparingly for molasses) Includes: Control cabinet + one piece of hose The designation Mod. M 6C12S-IND refers to a specific model variant of an eccentric screw pump (Progressive Cavity Pump) from the EcoMoineau™ M or C series by the manufacturer PCM. In industrial practice, the code is usually broken down as follows: Mod. M: Design or series (often a horizontal monoblock/industrial design). 6C12S: Specification of the hydraulic pump element (rotor/stator). The “6” usually indicates the flow rate per 100 revolutions (in liters) or the size, “C” indicates the geometry, and “12S” indicates the maximum operating pressure (up to 12 bar) for the corresponding number of stages. IND: Stands for Industrial (industrial design for demanding continuous use in wastewater treatment plants, the chemical industry, or the processing industry – as opposed to the food or hygiene variants of the manufacturer). Technical core components & performance, flow rate & pressure: When used with thin fluids (such as water at 0 bar), it achieves a flow rate of up to 4 m³/h and is designed for a maximum system pressure of up to 12 bar. Operating principle: A stainless steel rotor rotates eccentrically in a flexible elastomer stator. This creates moving cavities that transport the medium with low pulsation and gently (also ideal for viscous, abrasive or chunky media). Spare parts: Common spare parts, such as stators, are available in different elastomers (e.g. NBR (nitrile), EPDM, Viton or CSM/Hypalon) in order to optimally adapt them to the respective medium. Offer is valid without warranty.

Year of construction: 2022, condition: used, Uplifter mini crane MC 285-3 CWME, lifting capacity 2,820 kg at a radius of 1,400 mm. Maximum lifting height: 8,700 mm. Maximum working radius: 8,200 mm (at a load of approx. 150 kg). Equipped with assembly jib and transport cart UPT 200. Less than 100 operating hours. Storage location: at customer site. Delsytrd Tjhccqqscn

Year of construction: 2004, condition: used, functionality: fully functional, used peristaltic pump, make: Delasco Paris, model: PCM JZ 237, year of manufacture 2004. This pump is in our warehouse in Oradea, mounted on stainless steel frame. Delhsz D U Uljccqqocn Technical date. the JZ237 model offers the following standard performance parameters: Pump Type: Low-pressure peristaltic / Slurry pump Maximum Flow Rate: 300 to 600 liters per hour or 7,6 m3/hours Maximum Pressure: 1.5 bar Engine 400 V with power 1,5 kW direct-drive electric motor mounted on a steel base frame. Attached you have the pictures. This pump was making the liquid (milk and other liquids) transfers into a diary factory. This pump is sold with the pipes. Price 2.690 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 1998, operating hours: 88 h, condition: excellent (used), Selling water pump, - BBA B156 TW GMC. - 1998 year of construction. - 11KW/ 1460 rpm motor. - Worked 88 mth. - Capacity 180 m3/h. - Perfect condition/ like new. Dcslhccevgbayoqqen

Year of construction: 2014, condition: new, Flowserve DURCO Mark 3 ISO Centrifugal Process Pump – Complete Unit For sale: 2x Flowserve DURCO Mark 3 ISO centrifugal process pumps, complete with WEG electric motor and Flowserve mechanical seal support system. Pump specifications: Manufacturer: Flowserve / DURCO Series: Mark 3 ISO Model: 3K125-80-315RV Equipment No.: P-401 A Design pressure: 16 barg Design temperature: 70°C Material: Ductile Iron / EN-GJS-400-15 Year of manufacture: 2014 Manufactured in Newark, Nottingham, England Electric motor: Manufacturer: WEG Dcelhccjz A Avhjqqon Power: 11 kW Frequency: 50 / 60 Hz Speed: approx. 1465 rpm at 50 Hz Protection class: IP55 Efficiency class: IE3 Ex-rated motor Flowserve seal support system: Flowserve seal reservoir Barrier fluid system ASME VIII Div. 1 Year built: 2013 Complete pump unit mounted on a common steel base frame. Condition: Surplus industrial equipment Quantity available: 2 units Availability: Immediately available Location: Rotterdam, The Netherlands Worldwide shipping can be arranged.

Condition: used, Abel Piston Diaphragm High-Pressure Pump as Feed Pump, used Model: TH-G332-200/2 Features: including drive unit Dcjlhcsy Exqlscqqjn Description: Robust and high-performance industrial piston diaphragm pump. This unit is ideally suited for demanding conveying tasks such as slurries, suspensions, or abrasive media. Manufacturer: ABEL Year of manufacture: 1993 Flow rate: approx. 30 m³/h Operating pressure: up to 1.5 MPa Motor power: 15–18.5 kW Stroke rate: approx. 50 min⁻¹ Stroke length: 150 mm Equipment: Electric motor with drive unit, - Pulsation damper / pressure vessel - Piping & valves - Lubrication unit - Completely mounted on base frame Condition: used, tested (see inspection sticker) Applications: industry, mining and mineral processing, tunneling, chemical, wastewater treatment Availability: immediately ex stock, inspection by appointment possible

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Dolhccezzwbleqqecn Capacity: 8 liters/s. Year of construction: 2021 - Rarely used Flanges DN40 Voltage: 230 V mono (see technical details on photos)

Condition: used, Year of construction: 2015, machine/vehicle number: B96628619P11545, volume flow: 90 m³/h, operating pressure: 25 bar, power: 7.5 kW (10.20 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 2,900 rpm, protection type (IP code): IP55, Used pump from a well-maintained system. Dcolszb Ib Dehccqqen

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Capacity: 8 liters/s. Dslhszzwbrjccqqecn Flanges DN40 Voltage: 230 V mono (see technical details on photos) Year of construction: 2021 - Rarely used

Condition: used, NMNE 40 872 317 Dolhcezzah Uocqqscn NMNE 40EA596 376 Stainless steel pump housing with screw Hygiene version with bearing housing Stator NEMO LASI S65l d11027327001 Motor 7.5 kW, 1425 rpm / 250 rpm Inlet DN50 (± 400mm) Outlet connection DN 30 (± 400mm) Dimensions: (L x W x H): ± 2.400 x 500 x 600 mm