Crane runway system

Abus EHB 110 100 kg 15.000 x 6.500 mm

Year of construction: 1998, condition: excellent (used), 1 x Centrifuge Aryma / Rimann Bwodpfxeigni Ij Aprep 2.5 liters Year of manufacture: 1998 with open basket in excellent optical and technical condition Technical data: Max. capacity: 3 kg / 2.5 liters The machine can be inspected while running at any time.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, total length: 6,000 mm, total width: 2,430 mm, load capacity: 4,000 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, Abus overhead crane – Type: single-girder – Capacity: 4,000 kg – Lifting height: 6 m – Year of manufacture: 2021 – Hoist type: wire rope hoist – FEM/ISO hoist classification: 3m / M6 Dimensions – Span: 6,000 mm (center-to-center) – Installation height: 350 mm – Width of wheel set incl. buffers: 2,430 mm – Wheelbase: 1,900 mm – Weight: 1,310 kg – Suitable for crane rail: 50×30 mm Speeds – Lifting: 0.39 to 4 m/min (variable) – Trolley travel: 1 to 20 m/min (variable) – Crane travel: 1 to 20 m/min (variable) Features – Control: radio control – Crane manual included: yes – Condition: like new, used for only 2 years – Dismantled: early May 2026 Bwsdpfoy A Huasx Aprjp – 6 units available – Steel structure and conductor systems also available (34.5 m)

Year of construction: 2010, condition: like new (used), machine/vehicle number: MBUT134WSK, Technical data: 1x Demag KBK 1 wall slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125ton payload Projection: approx. 2m Weight completely approx. 150kg with steel chain hoist 125Kg chain hoist including bolts, cable drag, chassis, end cap etc. ----- ----- Alternatively, 3m cranes with 125 or 250kg payload are also available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures (example photo) Bodpopwgr Hofx Aprowp Shipping by courier or collection only by appointment

Condition: ready for operation (used), Year of construction: 2025, A relatively new double-girder overhead crane Konecranes is available. Load capacity: 12t. Documentation available. An on-site inspection is possible. Bwedey Anuhspfx Aprsp

Condition: used, Year of construction: 1996, core drilling diameter max. 25 mm bore depth 1000 mm swing diameter mm total power requirement 25 kW weight of the machine ca. 12,5 t dimensions of the machine ca. m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling " Centre " Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 _____ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Bjdpfx Ast Hw Aysprswp Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed motors 27 Nm / 1.000 daN Spindle drive steplessly adjustable 7 kW Total electrical load, approx. 30 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: " Ideal machine for the complete processing of large workpieces like tool a. dies (cooling holes) mould- and dieplates, hydraulicparts etc. by means of deep hole drilling up to 25 x 1.000 mm, face milling up to Ø 60 mm, spiral twist drilling, counterboring and threading up to M 24 x 3 mm. " SIEMENS Continuous Path Control in 4 axes Model 840 D, with process monitoring for coolant pressure, operation data control function, toollife, feed force,Error diagnostics and easy dialogueprogramming directly on the panel, etc. " High Frequency Spindle Make GAMFIOR with stepless speeds " Hydraulically movable drill bush carrier, swivels 90° for holding gun drills (ELB) or picking up regular tools from the tool changer like twist drills, milling tools, taps, etc. " With automatic tool changer made by MIKSCH, Model CTM 40, using a 12-position tool changer, which is mounted on the r.h.side of machine housing, in fixed position, only moving forward and backward for tool changing operation. " Built-on indexing table as B-Axis made by FIBRO Model RTN 400 = 420 x 420 mm, " Extra Rotary Table made by FIBRO with Ø 1.000mm, for indexing 3-144 positions " Built-in coolant device with chip conveyor and various filters. " 2 steady rests. " Completely covered working area with access at the front and at the side. Condition : Very good condition. This is a rare and valuable machine. Under Power Delivery : immediately ex our Stock Payment : Net, after conclusion of contract.

Condition: refurbished (used), Year of construction: 2019, TECHNICAL DETAILS Bedpfew Ekfusx Aprowp Drilling depth: 1,400 mm Full drilling range: 40 mm Spindle speed: 670 - 3,560 rpm Center height over bed: 380 mm Center height over floor: 1,400 mm Table length: 1,200 mm Table width: 1,200 mm Cross table travel: 2 x 400 mm Center height over table: 250 – 600 mm Z-axis Feed rate: 0-7,000 mm/min W-axis - 400 mm Feed rate: 0-7,000 mm/min X-axis - 800 mm Feed rate: 0-2,000 mm/min Y-axis - 350 mm Feed rate: 0-3,000 mm/min Rapid traverse speed: 3.5 m/min Motor nominal speed: 8,000 rpm Motor rated output: 18.5 kW MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Connected load: 40 kW Total length: 6,500 mm Total width: 3,500 mm Total height: 2,900 mm Weight: 8 t EQUIPMENT Manufacturer: Siemens Sinumerik 840 Dsl Including 1,700 l coolant system 20 solid carbide single-lip drills, diameters 6 mm to 20 mm, lengths 1,200 mm to 1,750 mm

Condition: excellent (used), Year of construction: 2020, Vetter P300 PROFI Crane System / Portal Crane Manufacturer / Type Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of Manufacture: 2020 Design: PROFI Crane System / Two-rail portal with crane bridge Load Capacity: 1,600 kg Description Used Vetter PROFI crane system as a two-rail portal with crane bridge. The system is equipped with a Vetter electric chain hoist, traveling trolley / carriage, and existing documentation. Suitable for industrial lifting and assembly work. Technical Data Crane System Span / Crane Bridge: approx. 5,100 mm Support Spacing: approx. 8,420 mm Underhead Clearance / Clear Height: approx. 4,085 mm Overall Height: approx. 4,905 mm Max. Hoist Weight: 85 kg Classification according to EN 15011: HC2 / S2 Operating Voltage: 400 V / 50 Hz Control Voltage: 24 V Hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Load Capacity: 1,600 kg FEM: 2m / M5 Protection Class: IP55 Lifting Speed: 4.00 / 1.00 m/min Power: 1.50 / 0.37 kW Carriage Vetter SiCO-HF Hand Carriage Year of Manufacture: 2020 Variant A Load Capacity according to Nameplate: 2,000 kg Max. Hoist Weight: 150 kg Weight: 17 kg Total weight is approximately between 1,500 and 2,500 kg, depending on the wall thickness of the profiles and foundation plates. Equipment Steel portal / Crane system Crane bridge Electric chain hoist 1.6 t Traveling trolley / Carriage Load hook Control unit Documentation / Documents available Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures System was installed and in operation Inspection and documentation available Scope of Supply Vetter P300 PROFI Crane System Crane bridge / Portal structure Bsdozc I Hvspfx Aprewp Electric chain hoist Traveling trolley / Carriage Existing control system and components Documentation as shown in the pictures Inspection possible by appointment. Scope of supply as shown in the pictures. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2008, operating hours: 39,000 h, functionality: fully functional, drilling depth: 1,800 mm, drill diameter: 30 mm, Manufacturer: SFT Model: TBM 3-1500 Machine type: Deep hole drilling machine with BTA system Drilling diameter: 15 – 30 mm Drilling depth: 1800 mm Chip conveyor: included Control: SFT / PS 100 incl. control cabinet Frequency inverter: included Oil sump: included Coolant tank: 2,500 liters oil Coolant pumps: 3 units, each adjustable to 40 liters, 100 bar Signal beacon: included Tailstock: rotating and adjustable according to drilling length Clamping: hydraulic clamping operation Drill spindle: speed regulation available Paintwork: light grey / blue Loading station: automatic door Machine footprint: 7,000 x 1,200 mm Filter footprint: 3,000 x 800 x 1,250 mm Commissioned: late 2007 Recurring maintenance according to manufacturer’s specifications Bodpsynui Ijfx Aprswp Available: end of March 2026 Operation: 2/3-shift operation

Condition: new, Year of construction: 2013, functionality: fully functional, Dürr RAM Station Double barrel pump Bwsdpfxsu Eqkvo Aprep Pumps and dosing concept MPDK X20: Type L10011525 - Pneumatic gun PVA08/40 - Heatable hose KMHH6007/040 - Electric dosing unit ED150/7 The device is unused!!!

Condition: used, functionality: fully functional, Year of construction: 2021, total height: 4,254 mm, total length: 15,500 mm, total width: 4,400 mm, load capacity: 1,600 kg, Professional crane system P 400 with chain hoist type SIXX 8AF-HF, load capacity: 1600 kg, lifting height 5 m. All technical specifications can be found in the technical documentation (see PDF). An advantage is that the crane can be easily extended thanks to its modular design. IMPORTANT: The crane system comes without travel drives!!!! Bwjdpfjxyhmcjx Aprjp