saw blade diameter 460 mm
cutting diameter 40- 150 mm
stroke 190 mm
capacity 90 degrees: square 90 x 90 mm
sawblade width 2,25 mm
cutting speed 35- 120 m/min
feed in one step 750 mm
feed - independent 3000 mm
total power requirement 22 kW
weight of the machine ca. 4,5 t
dimensions of the machine ca. 2,3 x 2 x 2 m
disk of circular saw-Ø: 400 mm
cutting area at 90° round: 130 mm
cutting area at 90° square: 200 x 80 bzw. 315 x 40 mm
cutting area in mitre at 45° square: flach/hochkant 180x70/100x60 mm
cutting speed: 19/28 m/min
engine: 380 V, 1,7/2,6 kW
space needed: 1100 x 1050 x 1620 mm
weight: 850 kg
Saegeblatt-: 400 mm
Cutting capacity at 90 round: 110 mm
Cutting capacity at 90 square: 110 x 400 mm
Cutting capacity round mitered at 45: 110 mm
Section mitered at 45 rectangle: 110 x 280 mm
Cutting speed: 16-50 m / min
Drive motor: 380 V, 1.5/2 kW
Space: 1200 x 1200 x 1480 mm
Weight: 1000 kg
Manual angle saw, blade Ø 400 mm
For cutting aluminium, plastics and wood profiles
- Safe cut, double springs
- Horizontal and vertical pneumatic clamps
- 0°, 15°, 22.5°, 30°, 45° right and left fixed angles
- Cuts of any angle between 45° and + 45°
- Impact-resistant cast iron core
- Manual cutting process
- Service ring wrench
- Disc Ø 400 mm
- Cooling system
- Three-phase power supply
OPTIONAL EQUIPMENT (for a surcharge):
- Conveyor K-3000 r...
A Kaltenbach cold circular saw is for sale. The machine was completely disassembled and overhauled from the ground up.
amongst other things
Saw table face turning
Type: KKS 400 H
Saw blade Ø: 400 mm
Engine power: 1.8/2.7 kW
cutting speed: 10/20 13/26 15/30 m/min
feed rate: 0 - 1,000 mm/min
Rapid forward/reverse: 1,550 mm/min
Working range max.: 130 mm
Working range square material: 120 mm
Working area flat material: 305 x 20 mm
saw blade diameter 285 mm
cutting diameter 10- 80 mm
stroke 120 mm
capacity 90 degrees: square 60 x 60 mm
sawblade width 2 mm
total power requirement 15 kW
weight of the machine ca. 3,1 t
dimensions of the machine ca. 1,93 x 1,8 x 1,8 m
disk of circular saw-Ø: 400 mm
cutting area at 90° round: 95 x 240 mm
cutting area in mitre at 45° round: 75 x 180 mm
disk rotations: 10,5 u. 21 upm
engine: 380 V, 2,6/3,2 kW
space needed: 1500 x 1100 x 2150 mm
weight: 630 kg
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this website are subject to change and non-binding!
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not assume liability for the content of linked external websites.