Double girder overhead traveling crane

ABUS ZLK

Condition: used, Year of construction: 1984, weight max. 20 t clamping width 15065 mm stroke / mm ABUS electric wire rope hoist type: GM5200H6 - 161.41.103.D Span width: 15065mm Rope - nominal diameter: 14.0 mm Rope length: 47.95 metre Construction: Special electric hoist rope SKZ 8-P Surface of wires: galvanised Construction: low tension Type of lay / direction of lay: cross lay / right hand lay Nominal strength of single wires: 2160 N/mm² Calculated breaking load: 240.0 KN Minimum breaking load: 209.5 KN Number of load-bearing wires in the outer strands: 152 Djdsudditepfx Ag Teup Trolley Year of manufacture: 2007 Trolley track: 1600mm Trolley weight: 1260kg Number of wheels: 4 pieces Running wheel diameter: 200mm Running wheel rotation: 52mm Operation: Floor operation via push-button switch Control: Electric Cross travel trolley Speed: 5.0/20.0 m/min Power: 14 /.65kW Duty cycle: 20/ 30 %ED Protection class: IP 55 Brake: Disc brake Lifting gear Speed: 4.00 / .66 m/min Power: 15.10 / 2.40 kW Duty cycle: 30/20%ED Protection class: IP 55 Brake:Disc brake

Condition: used, Tool presetter EZSET EZ400 Djdpsuhb Stefx Ag Teup

Condition: good (used), Year of construction: 1984, Overhead crane, crane, trolley, crane running gear, crane travel gear, girder travel gear, head girder for bridge cranes, ceiling crane head girder, head girder for single-girder bridge crane, head girder for double-girder bridge crane, double-girder traveling crane -Manufacturer: ABUS, 1 set of end plates for double girder overhead traveling crane -Type: ZLK Dedpovt Rapsfx Ag Tsup -Drive motor: ABUS 0.12/0.55 kW -Carrier rollers: Ø 200 mm / groove width 60 mm -Dimensions: see photo technical drawing -Transport dimensions: 2970/855/H720 mm -Weight: 640 kg

Condition: excellent (used), Year of construction: 2008, overall weight: 120,000 kg, main lifting speed: 3 mm/min, working height: 10,000 mm, Double hoist 60 + 60 Ton Lifting class H2 Freqence vario speeds Hoist ABUS GM 7600U6 FEM Group 1Am Ikusi remote (TM70 2.13) Little used / Under power / Direct availebel Dsdpfx Agexmf R Sj Tjup Span: 31820mm Lift height: 10000mm Capacity Kg: 120000 Lifting speed:0,50 - 3,30 M/Min Hoist trolley:5/20 M/Min Crane driving:1/20 M/Min Length: 31820mm Width: 4500mm Height: 2300mm Weight: 86000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1972, condition: used, machine/vehicle number: 51512/72, pression: 75 t throat: 300 mm Dedpsb Tdquefx Ag Tsup table size: 620 x 800 mm clearance hole in the die: 225 x 325 mm table adjustment: 175 mm tappet area: 180 x 475 mm tappet adjustment: 80 mm stroke adjustment: 16 - 140 mm number of strokes: 90 /min engine: 380 V, 3 kW space needed: 1700 x 1200 x 2500 mm weight: 3,3 t

Condition: like new (used), Year of construction: 2021, operating hours: 637 h, functionality: fully functional, Carbide circular saw sharpener from 80 to 840mm. Like new, only 637 operating hours. Simultaneous mounting of back and face grinding wheels. Sharpens all tooth profiles. Mist extraction system. Training and delivery available. Duedpfsyi Akcox Ag Tjp

Condition: reconditioned (used), Year of construction: 2016, travel distance X-axis: 6,500 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,300 mm, feed length X-axis: 10,000 mm, feed length Y-axis: 10,000 mm, feed length Z-axis: 10,000 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, spindle speed (max.): 7,000 rpm, spindle speed (min.): 20 rpm, table length: 8,000 mm, table width: 1,100 mm, RepairFIT by Dornhöfer The difference. Including installation & commissioning! Year of manufacture: 2016 Capacities / Travel distances: Longitudinal (X): 6,500 mm Vertical (Y): 1,800 mm Cross (Z): 1,300 mm Table size: Length: 8,000 mm Width: 1,100 mm Number of T-slots on the table surface: units: 7 Width of T-slots: 22 mm Distance between slots: 140 mm Paintwork: RAL 7021 (black grey) RAL 7035 (light grey) ref F-38 (DanobatGroup Blue) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Type A Dujdpjxvx Amofx Ag Top Main drive: Drive power: 100% duty cycle 43 kW Spindle speed range: Max. spindle speed: 20 – 7,000 rpm Torque: 900 Nm Feeds: X, Y, and Z axis mm/min 2 – 10,000 Max. rapid traverse speed: X, Y, and Z axis 35,000 mm/min Base area SLP8000: (without enclosure) 13.0 x 4.5 m Overall height: approx. 4.4 m Weight: approx. 34,000 kg Heidenhain TNC 640 HSCI Automatic milling head, Diagonal H207 Adapter angle milling head SK50 with Hirth gearing Automatic tool changer, 60 magazine places Chip conveyor Preparation / integration of NC rotary table Adaptive control ACCURA HEADS Coolant system 2 RepairFIT is our proven solution for a profitable entry into our product lines. The machines offered in this line are procured by us through a strict selection process and undergo a thorough inspection (Deep-Dive Check). After intensive cleaning, any identified defects or faults are professionally repaired by our expert service team.

Condition: excellent (used), Year of construction: 2009, CNC control : FANUC 160i - Accessories available. - Fanuc loading robot - Coolant system (Edge 2 tower from ARO-Technologies) - Oil mist separator (ELBARON SA) Travels: X-axis 650 mm Y-axis 300 mm Z-axis 300 mm C-axis swivel angle +150°/ -60° C' axis swivel angle +/- 180° Grinding spindle: Wheel dimensions up to 250 mm Speed 0 - 10,000 rpm. Max. spindle power 26 kW HSK 80 holder Max. Number of disks 6 Workpiece headstock Vmax 180°/s Drive power 1.6 kW ISO 50 mounting Precision (resolution) Resolution linear axes 0.001 mm C-axis 0.001° Dimensions: Length 3100 mm Width 1915 mm height 2190 mm Dujdpfxsr Ha Dvs Ag Tep Weight 8'500 kg

Condition: used, Year of construction: 2021, saw blade diameter: 800 mm, rotational speed (min.): 1,450 rpm, power: 5.5 kW (7.48 HP), Crosscut saw AS Very good, well-maintained condition Saw blade diameter 800mm. Sturdy tubular steel base frame. Powerful saw motors. Pneumatic material clamps (3 vertical). 2-hand safety operation. Dujdpfx Agjd Szf Ns Top Coolant device. Protective hood. Optionally with length measuring system or automatic positioning system. Version as automatic saw-drilling machine or automatic saw-punching machine on request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 11,500 h, machine/vehicle number: 3098, laser hours: 6,900 h, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, power: 10 kW (13.60 HP), year of last overhaul: 2024, working range: 4,020 mm, Equipment: cooling unit, documentation/manual, safety light barrier, MSF Pro 4001.20LB MicroStep CNC cutting system from the MSF Pro series with the following features: • 2D laser cutting head with an IPG YLS 10000 U fiber laser source • Fully automatic shuttle table • Fully automatic HSK 63 drilling spindle • Powerful Donaldson DFPRO 6 filter system with 7.5 kW Technical specifications: Machine designation: MSF Pro 4001.20LB Working area: approx. 4,000 x 2,000 mm Guides: high-precision linear guides Drives: maintenance-free Panasonic AC servo motors Transverse speed: up to 100,000 mm/min Measuring system: IRC 2500 (incremental encoder) Z-axis positioning speed: 18 m/min Z-axis travel range: 150 mm Acceleration Z-axis: 0.75 G Positioning accuracy (Pa*): 0.07 mm according to VDI/DGQ 3441 Repeatability (Ps*): 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% EX-TRABEAM® Pro laser cutting head Cleaning and calibration station (LU3K) Automatic nozzle changer (8 nozzles) Fully automatic drilling spindle Technical specifications: Drilling from/to: Ø 4 mm - Ø 30 mm Threading from/to: M5 - M20 Max. material thickness: up to 25 mm* Duodpfx Aovw Tdljg Tjp Power: 21 kW Revolutions: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Automatic drilling tool measurement Pneumatic hold-down device Brush For removing drilling chips Donaldson® DFPRO 6 Cyclopeel filter system Fan power: 7.5 kW Flow rate: 4,500 m³/h Asper Nesting® | Automatic nesting software With witt Gas Mixer Machine has always been operated under a maintenance and support contract