Used Abus Zlk for sale (102)

Condition: good (used), Year of construction: 1984, Overhead crane, crane, trolley, crane running gear, crane travel gear, girder travel gear, head girder for bridge cranes, ceiling crane head girder, head girder for single-girder bridge crane, head girder for double-girder bridge crane, double-girder traveling crane -Manufacturer: ABUS, 1 set of end plates for double girder overhead traveling crane -Type: ZLK Hjdpjvt Rapofx Afwjfb -Drive motor: ABUS 0.12/0.55 kW -Carrier rollers: Ø 200 mm / groove width 60 mm -Dimensions: see photo technical drawing -Transport dimensions: 2970/855/H720 mm -Weight: 640 kg

Condition: excellent (used), Year of construction: 2008, overall weight: 120,000 kg, main lifting speed: 3 mm/min, working height: 10,000 mm, Double hoist 60 + 60 Ton Lifting class H2 Freqence vario speeds Hoist ABUS GM 7600U6 FEM Group 1Am Ikusi remote (TM70 2.13) Hfjdpfx Ajxmf R Sefwob Little used / Under power / Direct availebel Span: 31820mm Lift height: 10000mm Capacity Kg: 120000 Lifting speed:0,50 - 3,30 M/Min Hoist trolley:5/20 M/Min Crane driving:1/20 M/Min Length: 31820mm Width: 4500mm Height: 2300mm Weight: 86000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 18 / 405156 / 1, overall weight: 7,490 kg, total width: 16,480 mm, load capacity: 14,000 kg, DGUV certified until: 12/2025, lifting height: 6,000 mm, Equipment: documentation/manual, ABUS overhead travelling crane with radio control, 14,000 kg Double-girder overhead crane H8 Hfodpfx Asxywwqofwsb Double-girder crane ABUS 14.0 t Year of manufacture: 2007 / Radio control retrofit in 2022 Span: 16,480 mm Further data available in the documents attached.

Year of construction: 1984, condition: used, weight max. 20 t clamping width 15065 mm stroke / mm ABUS electric wire rope hoist type: GM5200H6 - 161.41.103.D Span width: 15065mm Rope - nominal diameter: 14.0 mm Rope length: 47.95 metre Construction: Special electric hoist rope SKZ 8-P Surface of wires: galvanised Construction: low tension Type of lay / direction of lay: cross lay / right hand lay Nominal strength of single wires: 2160 N/mm² Calculated breaking load: 240.0 KN Minimum breaking load: 209.5 KN Number of load-bearing wires in the outer strands: 152 Trolley Year of manufacture: 2007 Trolley track: 1600mm Trolley weight: 1260kg Number of wheels: 4 pieces Running wheel diameter: 200mm Running wheel rotation: 52mm Operation: Floor operation via push-button switch Control: Electric Cross travel trolley Speed: 5.0/20.0 m/min Power: 14 /.65kW Duty cycle: 20/ 30 %ED Protection class: IP 55 Brake: Disc brake Lifting gear Speed: 4.00 / .66 m/min Power: 15.10 / 2.40 kW Duty cycle: 30/20%ED Protection class: IP 55 Hedpfxjuddito Afwofb Brake:Disc brake

Condition: used, total height: 2,000 mm, total length: 18,500 mm, total width: 2,000 mm, Empty weight: 4.000 kg Price: On request Overhead crane Abus Lifting capacity: 6300kg Hfedpfxewh Niqj Afwjb Lifting height: 7500mm Span: 19000mm Total crane weight: +/- 4000kg Be disassembled and prepared for transport by us. - Documentation available: No - CE certificate present: No - Transport dimensions: 18500mm x 2000mm x 2000mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2020, weight max. 0,5 t stroke 500 mm height of hook 1750 mm Hjdpfx Ajx U Ayiofwjfb

Condition: good (used), Year of construction: 1991, Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Abus, electric chain hoist -Type: GM Load capacity 250 kg -Main stroke: 10.0 m/min -Fine stroke: 2.5 m/min Hfodjx Tdwgjpfx Afwjb -Chain length: 3 m -Transport dimensions: 550/340/H350 mm -Weight: 33 kg

Condition: used, functionality: fully functional, load capacity: 160 kg, -KOM 3174- Offered here is a lot of Abus portal crane components in a modular system, consisting of various rail lengths ranging from 2300 mm to 6800 mm. The portal crane can be operated automatically along the vertical axis and manually along the horizontal axis. Additionally, an electric chain hoist type GM1 is included in the crane system package, with lifting speeds of either 2 or 8 m/min. Example photos of an installed portal crane from this lot can be found in the listing images. The frame in which the rails can be suspended is not included in the sale. The following rail lengths are available: - 2x approx. 6800mm - 8x approx. 6000mm Hfjdpfox U Da Rjx Afwsb - 2x approx. 4500mm - 9x approx. 2600mm - 2x approx. 2300mm Furthermore, 11 connecting pieces and two main switches for configuring the portal crane are included.

Condition: used, Year of construction: 2000, Technical details: lifting capacity: 1,0 t Arm length: ca. 5000 mm height lower edge cantilever arm: 3200 mm cantilever arm length from center column: 4500 mm column diameter: 406 mm Hedpfx Aou Nvmdefwofb rotation: 120° ° crane classification: DIN 15018 H2B3 dimensions L x W x H: Kran: 4,62 x 0,62 x 3,5 m dimensions L x W x H: Ausleger: 7,6 x 0,66 x 0,37 m The slewing pillar crane consists of the following main groups: Pedestal boom (transport dimensions L: 7600mm x W: 660mm x H: 370mm) Hoisting gear: Balkancar type MB 093n, lifting height 4 meters; load chain type 7,2 x 21 double chain; hook/buckle with rope safety, pendant control Type 071/53 Slewing operation manual outreach column to crane hook = 4.000mm height of column = 3.200mm; running width on jib = 180mm Column base flange Ø 700mm; pitch circle Ø 520mm, 12 holes Ø 31mm *

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, overall weight: 8,730 kg, total height: 950 mm, total length: 19,200 mm, total width: 7,080 mm, load capacity: 5,000 kg, main lifting speed: 8 mm/min, fine lifting speed: 13 mm/s, Equipment: documentation/manual, Abus Overhead Crane – Type: double girder – Capacity: 2x 2,500 kg Hedpfex Nw Dfox Afwjfb – Lifting height: 9 m – Year of manufacture: 2006 – FEM / ISO hoist: 3M – Type of hoist: wire rope hoist – Manufacturer: Abus Dimensions – Span: 19,200 mm centre-to-centre – Installation height: 950 mm – Wheel set width: 7,080 mm – Wheelbase: 5,800 mm – Suitable for crane rail: 50×30 mm – Dead weight: 8,730 kg Speeds – Lifting: 8/1.3 m/min – Trolley travel: 20-1 m/min – Crane travel: 60-3 m/min Features – Operation: radio remote control + manual control – Crane logbook available: yes – Electrical diagrams available: yes – Condition: in very neat condition, will be dismantled in working order – Dismantled: no, end of January 2026 – Other details: equipped with weight display – The lower blocks are 4,400 mm apart, ideal for stable truck loading

Condition: ready for operation (used), Abus Jib crane 3 meter / 250 kg Hfsdpfx Afsx Dd Iqowob

Condition: used, Year of construction: 1988, Year ca. 1988 arm length 2000 mm weight max. in kg max. 1000 kg height of hook max. 2000 mm WITHOUT LIFTING DEVICE . +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Hedpfoidrhyex Afwsfb

Condition: good (used), Year of construction: 1999, Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane undercarriage, crane undercarriage, trolley Hsdpfx Afswq Ndaewjfb -Manufacturer: Abus, electric chain hoist without hand control -Type: GM5 load capacity 1000 kg -Main stroke: 6.0 m/min -Fine stroke: 1.5 m/min -Chain length: 3.5 m -Transport dimensions: 570/390/H330 mm -Weight: 46 kg

Condition: excellent (used), Pillar jib crane Make: Abus Load capacity: 500 kg Jib length: 4000 mm Lifting height: 2600 mm Hfjdpex Hfuajfx Afweb Total height: 3550 mm Height of yellow column: 2950 mm Height of extension: 550 mm Base plate: 800 x 800 mm - 40 mm thick Abus chain hoist with 2 speeds 7.2 m/min and 1.8 m/min.

Condition: excellent (used), Year of construction: 2000, overall weight: 2,000 kg, total length: 3,000 mm, Overhead Crane ABUS - VS 2t x 3000 MACH-ID 9306 Hfjdpfsx Dkxiex Afweb Make: ABUS Type: VS 2t x 3000 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, overall weight: 11,560 kg, total height: 1,500 mm, total length: 19,200 mm, total width: 3,920 mm, load capacity: 20,000 kg, main lifting speed: 4 mm/min, fine lifting speed: 66 mm/s, Equipment: documentation/manual, Overhead Crane Abus – Type: double girder – Capacity: 20,000 kg – Lifting height: 10 m – Year of manufacture: 2006 – FEM / ISO hoist: 1Am – Hoist type: wire rope hoist – Manufacturer: Abus Dimensions Hfodpfjx Nwzqsx Afwob – Span: 19,200 mm centre to centre – Installation height: 1,500 mm – Wheelbase width: 3,920 mm incl. buffers – Wheel distance: 2,900 mm – Suitable for crane rail: 50×30 mm – Own weight: 11,560 kg Speeds – Hoisting: 4/0.66 m/min – Cross travel: 20/5 m/min – Long travel: 20/5 m/min Features – Operation: radio remote control + pendant control – Crane manual present: yes – Electrical diagrams present: yes – Condition: in very neat condition, will be dismantled in working order – Dismantled: no, end of January 2026 – Additional features: fitted with load readout

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 220-153710, total height: 3,000 mm, load capacity: 1,000 kg, main lifting speed: 5,000 mm/min, throat depth: 6,500 mm, working height: 3,000 mm, ABUS trolley GM 4 1000.5-2/HF 14 ABUS pillar jib crane VS 457 1000 kg x 6500 mm Crane disassembled but fully operational. Viewing possible by appointment. Hjdsx T T H Depfx Afwefb

Condition: excellent (used), For sale: complete pillar jib crane with a professional ABUS GM3 chain hoist, 500 kg lifting capacity. Sturdy German construction – perfect for lifting and handling machines, moulds, and workpieces in factory halls, workshops, and warehouses. - ABUS GM3 Hoist Specifications: • Capacity: 500 kg • Model: GM3 500.6–111 • Year of manufacture: 1997 • Lifting speeds: 1.5 / 6.0 m/min (two-speed) • Power supply: 3-phase 380–415 V / 50 Hz • Motor: 0.11 / 0.50 kW • Electromagnetic brake • Pendant control station - Jib Crane Specifications: • Total jib length: 300 cm • Working radius: approx. 270 cm • Type: column- / wall-mounted • Steel, rigid construction • Manual slewing • Complete with trolley and cables Hfsdpjw Rddyofx Afwsb ——— - Why choose this unit? • Renowned ABUS brand – one of Europe's leading crane manufacturers • Complete set, ready for installation • Ideal for use with machining centres, lathes, welding stations • 100% industrial-grade setup – not a DIY store toy - The set includes: • ABUS GM3 hoist, 500 kg • Pendant control • 3 m jib arm • Travel trolley • All wiring and accessories as shown in the photos

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor Hfjdpfx Afsfc T Tfoweb -Power: 0.1/0.75 kW -Speed: 12/53 rpm -Voltage: 380 V -Design: B3 -Shaft: Ø 39/50 mm/Ø 35/80 mm -Protection class: IP54/55 -Brake: 1.8 Nm -Quantity: 1 piece -Dimensions: 760/220/H265 mm -Weight: 51 kg

Condition: excellent (used), Year of construction: 2000, overall weight: 1,000 kg, total length: 6,000 mm, Overhead Crane ABUS - VS 1t x 6000 MACH-ID 9307 Make: ABUS Type: VS 1t x 6000 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Hfodsx Dkrvspfx Afwob

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: 220-036700, total height: 4,000 mm, load capacity: 1,000 kg, main lifting speed: 4,000 mm/min, throat depth: 7,000 mm, working height: 4,000 mm, ABUS trolley hoist GM 4 1000.4-2/HF 14 ABUS pillar jib crane VS 457 1000 kg x 7000 mm Crane dismantled, but fully functional. Hfedpfx Afsx T E Srjweb Inspection possible by appointment.

Condition: good (used), Year of construction: 1984, indoor crane, crane, electric wire rope hoist, manual trolley, push trolley, crane trolley, trolley undercarriage, crane undercarriage, crane undercarriage, trolley, carrier undercarriage, overhead track undercarriage -Manufacturer: Abus, crane chassis with electric cable hoist -Cable pull: Type GM1032FD -Load capacity: 3200 kg -Main stroke/fine stroke: 5/0.7 m/min -Hook path: 6.0 m -Roll spacing: 1400 mm, dimensions see photos -Drive: Abus -Accessories: connecting cables, without crane operation Hfodeu I Hpaepfx Afweb -Transport dimensions: 1550/1180/H530 mm -Weight: 512 kg

Condition: excellent (used), Year of construction: 2000, overall weight: 1,000 kg, total length: 4,250 mm, Overhead Crane ABUS - VS 1t x 4250 MACH-ID 9308 Hodpsx Dkqlofx Afwsfb Make: ABUS Type: VS 1t x 4250 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1988, Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Abus, electric chain hoist with driven chassis -Chain hoist: Abus type GM3- Load capacity 500 kg -Main stroke: 6 m/min -Fine stroke: 1.5 m/min Hodpfxsx Ikcrj Afwsfb -Chain length: 3 m -Chassis: Abus -Beam width: max. 260 mm -Dimensions: see photo and technical drawing -Transport dimensions: 520/400/H440 mm -Weight: 41 kg

Condition: excellent (used), Year of construction: 2000, overall weight: 500 kg, total length: 4,250 mm, Overhead Crane ABUS - VS 0,5t x 4250 MACH-ID 9309 Hfjdpfjx Di Txsx Afwsb Make: ABUS Type: VS 0,5t x 4250 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!