Floor conveyor for rim painting line

AFOTEC

Condition: as good as new (ex-display), Year of construction: 2026, SRF master figure left 2 m suction arm Scope of application Low smoke and dust Sporadic usage Use Little run the extractor hood Pgodpfxodqzbrj Adlok required Flexible by additional hose connection rear Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Push handle and cable holder Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3 Additional filter two prefilter basic data suction capacity Max 950 m ³/h diameter extraction arm Ø 150 mm length extraction arm 2 m diameter suction connection Ø 150 mm electrical connection 230 V / 50 Hz motor 1,1 kW sound pressure level 72 dB(A) dimensions (W x D x H) 705 x 655 x 900 m m weight approx. 71 kg

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg Pjdpfx Ajhp S Tredlegk - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: new, Cardan type conveyors are trolley models consisting of 4 bearing groups moving in a closed rail. These types of conveyors are indispensable on lines with their vibration-free movement, automatic lubrication feature and good appearance. Cardan type drive unit is overhead caterpillar type or lateral gearing torque safe. Pitches between the chain hangers are 400 mm and its multiples. Through central lubrication unit on the system, chain bearings automatically perform lubrication process as desired time interval. Pgedpfx Adjdy Eytjljk Torque limiter is used in order to protect the conveyor system when the drive units are compressed and forced. The bearings mounted on the chain are capable of operating at 250°C. The conveyor chain tensioning system can be performed as spring or screwed. The cardan conveyor rail is particularly bent from the sheet. In long-line conveyor systems, more than one drive unit is used and in such systems, a synchronous operation is provided between the drive units. There are three types as Light Type - Medium Type - Heavy Type based on the need. • Cardan type conveyor is based on moving the cardan chain in three axes on the cardan rail. • Cardan Type Drive unit as: Top caterpillar type or Side gear with torque safe system. • The pitches between chain hangers are 400 mm and its multiples. • Thanks to the central lubrication unit on the system, the chain bearings automatically lubricate at the desired time interval. • Torque limiter is used to protect the system from jamming and forcing of the drive units to protect the conveyor system. • The bearings mounted on the chain are capable of operating at 250 degrees. • Conveyor chain tensioning system is made with spring or screw. • Cardan conveyor rail is specially bent from sheet metal. • In long line conveyor systems, more than one drive unit is used, in such systems a synchronized operation is provided between the drive units. • There are three types according to the needs.

Condition: good (used), Year of construction: 2007, operating hours: 9,600 h, functionality: fully functional, Kaeser SK21 screw compressor from 2007 in excellently maintained condition. Pedpfox H Ulujx Adljgk Maintenance kit (oil separator cartridge, replacement filter, air filter, and oil) is included. Maintenance records and compressor logbook are available. Power: 11 kW Pressure: 8 bar Load hours: approx. 9,600 h #8442

Condition: excellent (used), Year of construction: 1995, Various scribing and straightening plates, different sizes: 2000x7000x300 mm 1500x3000x205 mm Pgedoyh A Aajpfx Adljk 1500x3000x255 mm 2000x4000x100 mm 2000x4000x150 mm 2320x4675x460 mm 2400x4000x400 mm 2000x3000x300 mm 1500x3005x260 mm 2000x7000x300 mm 150x6000x210 mm 1500x3000x200 mm 1500x3000x200 mm 1500x3010x200 mm 1000x2000x150 mm Available individually.

Condition: good (used), Year of construction: 2013, Powered roller conveyor, 5.95 m, width 64 cm, Transnorm – used - Podpfxswxvrto Adlegk Price ex-location (net): €395! Manufacturer: Transnorm Year of manufacture: 2013 Element length: approx. 5.95 m Element width: approx. 68 cm Roller length: approx. 64 cm Roller diameter: approx. 4 cm Condition: good Available: immediately Location: warehouse Frankenberg / Saxony Powered roller conveyor, 3.80 m, width 64 cm, Transnorm – used - Price ex-location (net): €295! Manufacturer: Transnorm Year of manufacture: 2013 Element length: approx. 3.80 m Element width: approx. 68 cm Roller length: approx. 64 cm Roller diameter: approx. 4 cm Condition: good Available: immediately Location: warehouse Frankenberg / Saxony Unfortunately, the conveyors were not photographed – the roller conveyor can be seen at the back of the picture.