Disc harrow

Amazone Ceus 5000-2TX

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 6 h, load capacity: 3,400 kg, lifting height: 8,860 mm, fuel type: diesel, mast type: telescopic, construction height: 2,485 mm, empty load weight: 8,500 kg, total length: 5,440 mm, drive type: Diesel, construction width: 2,240 mm, Telescopic forklift rigid Mast type: Telescopic Technical condition: New Front tires size: 460/70 r 24 michelin xcml Guedpfx Ajw Ir Insb Uok Rear tires size: 460/70 r 24 michelin xcml

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Gjdpfxjfg E Hps Ab Usuk Price on request.

Condition: used, Year of construction: 2023, Mounted wedge ring roller KWM 3001-600 Machine no. KW00059843 Set of bearings for / roller - Mounted compact disc harrow - Disc carrier field for Catros Hydraulic / working depth adjustment LED lighting for the road for rigid machines / disc Guedpfsr Ty N Eex Ab Usk

Year of construction: 2007, condition: good (used), functionality: fully functional, machine/vehicle number: 1785-6201, Single-screw extruder Gujdpfsu Itqdex Ab Uek

Condition: used, Year of construction: 2019, front tire size: 600/70R34, rear tire size: 710/70R42, Equipment: compressed air brake, Radar sensor Vario-Terminal 10.4 inch roof hatch / VarioGuide Variotronic VarioGuide device control / GSM Variodoc Pro Super Comfort seat controller / Hydr. pump 152 l/min / / Gedpfxor Ty N Nj Ab Usuk

Condition: used, Year of construction: 2024, Rear section Primera DMC 4200 l 1-fold conveyor section Single-shoot distributor heads / f. 16 rows Long loading board for rear section Drawbar with folding support foot / lower linkage attachment Cat. 3 braked axle with parking brake / dual-circuit air brake system Gujdeuhnwvspfx Ab Ujk

Condition: good (used), functionality: fully functional, empty load weight: 7,200 kg, maximum load weight: 30,800 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 09/2017, loading space length: 9,800 mm, loading space width: 4,500 mm, loading space volume: 48 m³, suspension: air, tire size: 315.80 r 22.5, color: blue, Year of construction: 2017, Equipment: ABS, sem tecnokar, year 2017, 48m3 aluminum tipping tank with 10 tires, 3 disc axles with 1st liftable and 3rd steerable, ebs, electric sliding discover cover, stainless steel chests, alloy wheels, watertight flag overhead hatch, excellent condition, INTERDRIVE SRL-PARMA CONCESSIONARY Godpfx Astvplcjb Ujuk

Condition: good (used), functionality: fully functional, empty load weight: 7,900 kg, maximum load weight: 30,100 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 09/2007, loading space length: 10,000 mm, loading space width: 2,450 mm, loading space height: 2,200 mm, loading space volume: 60 m³, suspension: air, tire size: 385.65 r 22.5, color: silver, Year of construction: 2007, Equipment: ABS, Smr 60m3 aluminum tecnokar tank tipper, rear with sealed overhead door, front vibro motor, 3 disc axles with 1st liftable and steerable, hydraulic couplings, uncover cover with manual handling cloth, stainless steel box, air suspension, year 2007, overhauled until 30.11.2024-CONCESSIONARY INTERDRRIVE SRL-PARMA Gujdpfxjtpm Tme Ab Uok

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Gujdpswki Apsfx Ab Uok Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed Guodpfxefgyigj Ab Ujk vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.