Fertilizer spreader

Amazone ZA-TS 4200 Hydro Ultra Profis

Condition: used, Year of construction: 2023, Main window right/left with Auto TS roll guard L tell device / swivel, factory-fitted Inclination sensor f Weighing system elect. / Profis weighing system built-in parts f ZA basic units LED / Rear lighting manual Dpcxlf

Condition: used, Year of construction: 2013, In accordance with our "General and interpreted terms and conditions" without any guarantee & warranty, we can offer you the following vehicle today without obligation until completion, subject to errors, typing errors & prior sale: Amazone fertilizer spreader Type ZA-M 4200 Ultra Profis Hydro production 2013 little used very good condition Dqlbuh payload 4.200 kg basic weight 743 kg Price : ¤ 11.000,00 ( net ) All information without any guarantee & warranty. Our ? General and interpreted terms and conditions? The place of jurisdiction for both parties up to a value in dispute of ¤ 5,000.00 is the Ludwigslust Local Court, for values in dispute exceeding this, the Schwerin Regional Court. Errors, typing errors & prior sale reserved.

Condition: used, Year of construction: 2023, Spreading vane set TS30 right ISOBUS operator terminal AmaTron4 ArgusTwin for / ZA-TS WindControl for ZA-TS Hydro GPS-Switch basic for AmaTron4 SpreaderConnect / for ZA-TS Drive Hydro left with AutoTS Drive Hydro right with AutoTS / main disc left Dpg39N

Condition: used, Year of construction: 2024, ArgusTwin + WindControl Spreader Connect Hydro drive left and right with / AutoTS and FlowControl Profis Pro main screen left and right with AutoTS / Rolling and parking device s Tilt sensor EasyCheck mats, 16 pieces / Device control unit Pdvoaluuxx

Condition: used, Year of construction: 2023, Operation Spreading vane set TS20 left + right Hydro drive left + right with Auto TS / and FlowControl Main disk left + right with AutoTS Pipe protection bracket Rolling and parking device swiveling Working light Tilt sensor f Weighing system / 16 pcs EasyCheck- Blxxtip2Fs

Condition: used, Year of construction: 2024, Manual operation Spreading vane set TS20 left Spreading vane set TS20 / right Hydro drive left with AutoTS and FlowControl ProfiSPro Hydro drive / right with AutoTS and FlowControl ProfiSPro Main disc left with AutoTS / main disc rec Dlpvoufs

Condition: used, Year of construction: 2018, approx. 5000 ha Spreading disks TS 30 / Gxb0Yci

Condition: used, Year of construction: 2024,

Condition: used, Year of construction: 2024, Basic hopper / ZA-V Easy spreader unit / warning sign foiling / 910 mm PTO shaft / with friction clutch / S 1400 hopper extension, welded / factory-fitted / S mud flap / LED lighting to rear / Easy operating computer Czyg79K8Ig

Condition: used, Year of construction: 2024, manual operation Spreading disk set V-Set 2 Control computer AmaSpread 2 / signal cable 7-pin Boundary spreading syst. Limiter V+, right Pipe protection bracket S Rolling and / parking device pivoting Inclination sensor for weighing system Empty sensors / Profis- Bngro3N987L

Condition: used, Year of construction: 2004, Trailed sprayer 30 meters 9 boom sections Raven parallel drive system CR 7 9 / boom section control Amatron + Smartswitch / Bo9Hmkmx30

Condition: used, Year of construction: 2023, 3-way unit Boundary spreading system Limiter V Pipe protection bracket L Mechanical / position indicator Spreader ZA-V hopper extension S 2000 Built-in parts for / ZA basic units PTO shaft with friction clutch Strainer L and ladders / LED lighting to the rear Dpdkpb

Condition: used, Year of construction: 2023, Spreading disc set V-Set 1 3-way unit Boundary spreading unit Limiter V / pipe protection bracket S Rolling device pluggable Spreading unit ZA-V Hopper attachment S / 2000 PTO shaft with friction clutch Built-in parts for ZA basic units Mud flap S / LED lighting Bnr9Fw0Jg3

Condition: used, Year of construction: 2024, ISOBUS-Terminal AmaTron4 GPS-Switch basic f. AmaTron 4 Boundary spreading system / Limiter V+ right Pipe guard bracket Rolling and parking device, pivoting / Inclination sensor f. weighing system Weighing system Empty indicator sensors ProfiS weighing system Installation parts / for ZA-Grundger W8Itob23

Condition: used, Year of construction: 2023, Hybrid drive with steering ArgusTwin for ZG-TS 01 WindControl for ZG-TS 01 / Spreading unit ZG-TS 01 with FlowControl Spreading vane set TS 30 left / Spreading vane set TS 30 right EasyCheck mats, 16 pieces Roll-up tarpaulin / Work lighting set Typeg Blrfbkjmrfj

Condition: used, Year of construction: 2023, Equipment: compressed air brake, Offset stand 110mm f. ZG-TS Hydraulic drive w. steering Spreader Connect f. / ZG-TS Argus-Twin f. ZG-TS 01 WindControl Spreader unit w. FlowControl / Spreading vane set TS30 li+re EasyCheck Mats, 16 pcs. Roll-up tarpaulin / Work lighting set Stüt 37Xezzob3

Condition: used, Year of construction: 2022, Documentation in German Spr Type plate PTO shaft 910 mm with / friction clutch Container attachment L 3200 swivel mounted ex works Mud flaps L / and ladders LED lighting to the rear for road travel Roll-up tarpaulin L / with manual operation Pdvfuesoe7

Year of construction: 2020, Condition: refurbished (used), Banding machine ATS US 2000 AD Speed: appr. 30 straps per minute Pwuwwi Frame size: 360 mm x 260 mm Tape width: 47 mm * no change from paper to film * no heap-up time * no odor * Computer control with LED status * Roller for long rolls

Condition: good (used), Year of construction: 1995, Functionality: fully functional, cutting length (max.): 4,100 mm, cutting height (max.): 72 mm, cutting width (max.): 293 mm, Selling on behalf of a customer: Panel dividing saw incl. scoring unit Long fence TYPE FPM 2000 / 4200 Year of construction. 1995 Engine power: 8,6KW see type plate Cq32Stb2Xw Max. Cutting height: 72mm Max. Processing width: 2930mm Max. Machining depth: 4100mm Machine is located in Büchlberg near Passau. Machine is still in operation and can also be inspected there.

Year of construction: 1999, Condition: used, hydraulic lockbolt rivet gun, rivet gun, blind rivet gun -hydraulic lockbolt rivet gun -without: storage container -incl.: hydraulic unit and control Hvmbidp -Dimensions: 1230/800/H1300 mm -Weight: 450 kg

Condition: excellent (used), Vötsch Type: VCL 4200/S Water-cooled climatic test chamber Irradiation device with metal halide radiator Door with window Internal dimensions : Width 2000 mm Height 1000 mm Depth 1150 mm External dimensions : Width 3300 mm Height 2000 mm Depth 1250 mm 2X pipe penetration 125 mm Performance range for temperature tests without irradiation Temperature range - 40°C to +150°C Temperature deviation ± 0.5 K in time, in the supply air to the test room Temperature change rate according to DIN 50 011 Part 12 Heating: approx. 1.0 K/min. Cooling: approx. 1.0 K/min to -30°C Performance range for climatic tests without irradiation Temperature range +10°C to +95°C Temperature constancy ± 1.0 K over time, in the supply air to the test room Humidity range 10 to 95 % r.h. Humidity constancy ± 1 to ± 3 % r.h. over time, in the supply air to the test room Dew point range +5°C to +88°C Irradiation (solar simulation attachment) Irradiation type: 4 pcs. 2 kW metal halide radiators each Irradiance 1000 W/m² ± 5 % in the range 280 to 3000 nm Irradiation uniformity ± 50 W in the guaranteed area Reference plane taking into account the installed lateral reflector plates Test area (W x D) 1700 x 800 mm with distance reference plane - UK irradiation unit of approx. 750 mm or 400 mm above the floor Performance range for temperature tests with irradiation Temperature range -10°C to +100°C Temperature deviation in time ± 1.0 K, in the supply air to the test room Rate of temperature change according to DIN 50 011, part 12 Heating: approx. 1.5 K/min. Cooling: approx. 0.5 K/min. Performance range for climatic tests with irradiation Temperature range + 10°C to + 80°C Temperature deviation ± 1.0 K over time, in the supply air to the test room Humidity range 10 % to 85 % r.h. Humidity deviation ± 1 % to ± 3 % r.h. temporally, in the supply air to the test room Dew point range + 5°C to + 76°C Average temperature and humidity changes If temperature and humidity change simultaneously, the humidity is undefined Temperature change + 90°C to 0°C in 1 h 0 °C to - 40°C in 1 h 0 °C to + 90°C in 1 h Humidity change 0 °C to + 90°C / 80 % r.h. in 1 h + 90°C / 80 % r.h. to 0°C in 1 h, whereby the final dehumidification value is not defined. Average temperature and humidity changes If temperature and humidity change simultaneously, the humidity is undefined Dqn00J Temperature change + 47°C to -30°C in 1 h - 30°C to + 23°C in 1 h + 23°C to + 47°C in 1 h Connections: Nominal voltage 400 V +6/-10 %, 3/N, 50 Hz Rated power 23 kW Nominal current 49 A Cekon 63 A plug Connection cable approx. 3.5 m Fuse protection 63 A, slow-blow on site Installation room Heated, with level floor Heat output to the installation room approx. 7 kW with radiation module switched on Weight approx. 2000 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2004, Netstal Synergy S 4200 K-1700 injection molding machine Year 2003 Used PP/PS materials Hours of operation 77956 CLOSING SYSTEM Closing force (Ton) 420 Space between columns H/Hp. (mm) 713x713 Plate size (H x V) (mm) 1127x1060 Mold height (max.-min.) (mm) 400-750 Space between the platen (mm) min. 400 Opening stroke (max.) (mm) 0-700 Ejection force ( kN) 80.8 Opening stroke (mm) 200 Cores (YES/NO) YES Number of cores 6 Dry cycle / Dry cycle 1.8 INJECTION SYSTEM Auger diameter (mm) 62 Injection weight (Max.) (Material)(g) 719 (PS) Injection volume (cm3) 749 Injection pressure (bar) 2296 Injection speed (cm3/s) 2868 Nozzle force / Nozzle force (Max.) (Ton) 88 Nozzle stroke / Nozzle stroke (Max.) (mm) 248 Plasticizing capacity / plasticizing capacity (g/s) 82 Number of heating zones 6+1 cooling Heating power / heating capacity (kW) 37.8 OTHER DATA Tank capacity (Liters) 445 Kzqci7Civv Weight (kg) 27000 Machine dimensions / Dimensions (DxSxW) 7825x2150x2599

Condition: good (used), Year of construction: 1998, net weight: 670 kg, Vertical panel saw Putsch Meniconi SVP 620 4200 Year of construction 1998 Serial No. 98620183 Max cutting height vertical 2200mm Max cutting height horizontal 2080mm Max cutting width 4200mm Max cutting depth 45mm Engine 3hp Saw blade diameter 250mm B0Bgxyv9 Overall dimensions 5400x1500x2950mm, weight 670kg

Year of construction: 2018, Condition: excellent (used), DTS Stainless Steel Screw Cooler 01.400x600, serial no. 18028/01, year of manufacture 2018, with screw auger delivery and with a heat exchanger DTS Stainless Steel Screw Auger, with Mida Soak chemical injection B9Nug770Ba DTS Stainless Steel Screw Auger Conveyor, with cooling water tank

Condition: excellent (used), Vötsch Type: VC 4200/S Climate test chamber 2500 liters water-cooled Temperature test: Temperature range -40°C to + 180°C Temperature deviation in time: ± 0.3 to ± 1.0 Spatial temperature deviation: ± 1.0 to ± 2.0 Bo2Sqwxp Temperature gradient 2 to 4 Heating speed: 2.0 K/min Cooling rate: 3.0 K/min Climatic tests: Temperature range: +10 °C to +90 °C Temperature deviation over time: ± 0.1 to ± 0.5 Temperature deviation over time: ± 1 to ± 1.5 Temperature gradient 2 to 3 Humidity range: 10% to 98% r.h. Humidity deviation over time: + 1 to 3 % r.h. Dew point range +5 to +89°C Test room dimensions: Width approx. 2000 mm x depth 1150 mm x height 1150 mm External dimensions: Width approx. 3500 mm x depth 1450 mm x height 2100 mm Nominal voltage 3/N/PE AC 400 V ±10%50Hz Rated power 13 kW Nominal current 21 A Refrigerant R-452A Weight approx. 1350 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.