Gear motor 0.12 kW

ASUG VEM GWWN 1052 KMR 56 K 4

Condition: used, Year of construction: 1996, functionality: fully functional, cutting height (max.): 120 mm, cutting width (max.): 350 mm, Multiblade + trimmer CML mod J 350 RT Ce kW 37 Dcsdpfxevlxbxs Apbjn

Condition: new, capacity 90 degrees: round 500 mm capacity 90 degrees: square 420 mm 600x400 saw band length 5320x34x1,1 mm band speed 15 - 100 m/min table height 805 mm total power requirement 3,0 kW Djdpfx Ajupxupspbjcn weight of the machine ca. 1,45 t dimensions of the machine ca. 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload super fast (front loading) • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Minimum cutting range from around 10 mm Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, power: 8.75 kW (11.90 HP), pressing force: 25 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 360 mm, clearance between the columns: 800 mm, total length: 16,500 mm, total width: 10,500 mm, total height: 27,500 mm, overall weight: 2,200 kg, die cushion stroke: 160 mm, Hydraulic press PYE 25 S1M with ejector. Year of manufacture: 1987. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 25 tons. Working pressure: 16 MPa. Upper table: 450 x 360 mm. Lower table: 630 x 500 mm. Clearance: 800 mm. Cylinder stroke: 500 mm. Djdpfx Apstzwxdobecn Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Lower ejector force: 10 tons. Lower ejector stroke: 160 mm. Power requirement: 8.75 kW. Weight: 2200 kg. Height: 2750 mm, Length: 1650 mm, Width: 1050 mm. Very good technical condition. The machine has undergone a complete overhaul. Machine can be inspected and tested under power.

Condition: good (used), Robland planer thicknesser Dedpfx Aovyhmgepbecn 3 Tersa knives 1 thicknesser feed speed thicknesser processing height 230mm soundproofing combs in the table table length 140cm the machine is efficient and ready to work

Condition: new, DescriptionWork table made of heavily ribbed gray cast iron and base frame made of welded steel guarantee torsional rigidity and vibration-free operationUnique in this performance class: Format sliding carriage made of anodized aluminum for highest cutting precisionCutting plane directly on the saw bladeSwiveling saw blade from 90° - 45Trimming frame with aluminum crosscut fence and adjustable fence jaw for panels and large workpiecesMilling protection hood for profilingTwo independent motors for each working unitTECHNICAL DATADimensions and weightsWeight (net) approx. 190 kgSuction connectionSuction port diameter 120 mmSuction port diameter saw blade guard 60 mmElectrical dataSupply voltage 400 VMains frequency 50 HzNominal operating mode drive motor S6Duty cycle drive motor 40Power of drive motor 2 x 1.8 kWSliding carriage and tableLength of sliding table 1140 mmFormat sliding carriage width 201 mmHeight of format sliding carriage 70 mmtable length 1040 mmtable width 224 mmMilling spindlespindle mandrel diameter 30 mmuseful length of spindle 75 mmspindle speeds 5000/7500 min?¹Milling tool diameter l diameter max. 160 mmtool diameter max. tenon milling 200 mmCircular saw unittrimming length 1200 mmCutting width with rip fence 700 mmMax. Trimming width to the left of the saw blade 1200 mmSaw blade inclination 90 - 45Max. Cutting height 90° 75 mmMax. cutting height Cutting height 45°60 mmMax. Saw blade projection 90° 67 mmMax. saw blade Saw blade projection 45°40 mmDiameter (main) saw blade 250 mmSpeed (main) saw blade 4000 min?¹EquipmentAnodized aluminum sliding carriageTrimming frame with angle-adjustable crosscut fence with a folding stop and degree scaleSaw parallel stopEccentric clampTable wideningTrimming fence with wooden fence jawsManual height adjustment of the spindleSaw blade height adjustment manualsaw blade tilt adjustment manual&nbsp, Dedsvwfqwjpfx Apbscn

Condition: good (used), Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller, power regulator -Manufacturer: Gefran, power controller power regulator -Type: GTF-25-480 -Number: 5x power controllers available -Price: per piece Dsdpjubfyhsfx Apbjcn -Dimensions: 150/60/H135 mm -Weight: 0.9 kg/pc.

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Dodpfxovyuqfs Apbjcn

Condition: new, Year of construction: 2024, power: 1.2 kW (1.63 HP), SCHORR HIGH LIFT TRUCK ELECTRIC PRO 1500KG LOAD CAPACITY 5M LIFTING HEIGHT RR15HH450E FREE LIFT Powerful professional tool with a load capacity of up to 1500 kg Reaches a lifting height of 5m ✅ Free lift: mast only extends from the height of the mast - ideal for low ceiling heights ✅ Robust triplex mast & solid chassis ✅ Charger included in the scope of delivery ✅ Including powerful 24V 200Ah lead batteries ✅ Digital energy level display & hour meter ✅ Small turning radius of only 1575mm - ideal for narrow working areas EQUIPMENT / FEATURES Robust and high-quality design Thanks to its robust and stable design, the pallet truck guarantees high stability and durability. With a load capacity of 1500 kg, this high lift pallet truck is a real powerhouse and offers the necessary strength to lift heavy loads effortlessly up to 5 m. Free lift function: With its free lift, the high lift pallet truck is also particularly suitable for warehouses and rooms with low ceiling & clearance heights. The triplex mast only extends from the height of the mast (1570 mm) and therefore enables safe and effective working in confined spaces. A real all-rounder in combination with the lifting height of 5m. Charger included: The built-in 24V lead battery with a capacity of 200Ah ensures a long running time. To charge the electric pallet truck, you can simply connect it to a conventional 230V socket using the charger included in the scope of delivery. Dcsdpfxsqwdlte Apbsn Easy handling: The pallet truck is easy to operate and has a high-quality control unit, which is waterproof and can therefore also be used in damp or cool rooms for short periods. In addition, the control instruments such as the battery charge indicator, the emergency switch and the keys are centrally located and therefore in the operator's direct field of vision. Thanks to its small turning radius of just 1575 mm, the electric pallet truck is particularly maneuverable and flexible to use. Various drive programs: Thanks to the various travel programs, the SCHORR high lift pallet truck is extremely flexible and adapts perfectly to the needs of its users. In addition to the normal transport speed of approx. 5.8 km/h, it also has a "creep mode". This mode enables slow and precise movement in order to maneuver even in the narrowest aisles and shelves. Technical data Manufacturer (abbreviation): SCHORR Manufacturer's type designation: RR15HHE free lift Load capacity: 1.5t Model: 500E Tare weight incl. batteries: 1155kg Drive: Electric Tires: Polyurethane Basic dimensions Overall length: 1975mm Overall width: 820mm Length including fork crown: 905mm Stroke: 5000mm Free lift: 1740mm Height of mast retracted: 2214mm Height mast extended: 5510mm Fork dimensions DIN ISO 2331: 60mm x 170mm x 1150mm Fork outer spacing: 570mm Aisle width with pallet: 800x1200 lengthwise 2450mm Turning radius: 1575mm Speed Travel speed with/without load: 5.8km/h / 6.0km/h Lifting speed with/without load: 0.09m/s / 0.16m/s Lowering speed with/without load: 0.15m/s / 0.16m/s Max. Gradeability with/without load: 6% / 15% Would you prefer to finance or lease the device? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you!

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a new HAGER HDE-59 BIG lathe with a center distance of 1,000 mm. The exhibition machine is in its original condition, so you have the full guarantee. Technical data - Motor 2.2 kW / 3 HP / 400 V - Speed levels: 100-450 rpm 300-1,100 rpm 750-2,700 rpm - Center height 250 mm - Center width 1,000 mm - Hand rest 350 mm - Direction of rotation switch - Spindle M33 x 3.5 mm with ASR (Euro) run-off safety groove - Spindle and tailstock cone MK3 - Hollow spindle D = 20 mm - Main spindle with 4 bearings - Quill travel 150 mm (with scale) Dsdpfotpnddsx Apbocn - Total length 1,780 mm - Weight 235 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: wood turning machine, lathe, lathe, turning, turning knife, wood turning, turning, machine, Hager Reference: R-A0117

Condition: good (used), Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 20 m Dcodpfxexbx R Ij Apbon -Number: 3x steel cable available -Price: per piece -Transport dimensions: Ø 440 x 110 mm / Ø 430 x 95 mm -Weight: 10.7 kg / 11 kg