Pallet wrapper turntable stretching

ATLANTA - 25mm flacher Drehteller SYNTHESI - 200% Vorreckung

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min Bedpeykucmofx Aaaelf F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Condition: excellent (used), Year of construction: 1988, manufacturer: LÖDIGE year of construction: 1988 type: FKM 4200 D Bledsrywvdepfx Aaaef e-engine: 75 kW Siemens

Year of construction: 2018, condition: ready for operation (used), Max. output: 1400 bottle/h, PET can lid format set: 100/127mm, can diameter: 147.4/182mm, pitch diameter: 530, operational hours counter: ca. 500h, with documentation. Bjdji A Iykopfx Aaaelf

Condition: used, Year of construction: 2017, Overview  This semi-automatic new glass pusher was built in 2017 by the German manufacturer Alwid. The machine is professionally stored and can be viewed in person at any time. Technical details Semi-automatic new glass pusher with interchangeable gripper units 4 heads: adjustable depending on the layer pattern ALWID FEEDING TABLE + ALWID DEPALLETIZER Bljdpfx Aevtpc Aeaasf

Condition: used, Year of construction: 2013, Overview Complete filling line from the food sector made by the German manufacturer Breitner (2013). It was previously used for filling liquid cheese products and sealed with press on and screw closure. Further more spray pumps with rising pipes can be handled. Due to various additional features, such as a laminar flow system and special attention to hygienic design, a cleanroom classification is achieved. Machines: Pos. 1 Bottle unscrambler Breitner BFC 8002 (2013) Pos. 2 Filling machine Breitner MDL 2086 (2013) Pos. 3 Rotary capping machine Breitner SRT 5044 (2013) Conveyor systems: several conveyors included. All conveyors: Chain width: 82,5 mm Belt housing: stainless steel AISI 304 Belt guide: plastic c-profile, 2-fold and stainless steel rods Chain material: Delrin steel The unclosed bottles are protected of falling dirt by a roof made of plexiglas over the conveyor.  Bottle formats: Our service: send us your requirements and we will check the possibility of processing your bottle format. Cap formats: Screw caps, press-on caps, spray pumps with riser pipes   Our service: send us your requirements and we will check the possibility of processing your cap format. Capacity: Unscrambler: max. 6.000/h Filling machine: max. 5.000/h Rotary capping: max. 5.000/h The output depends on the container and cap geometries and the filling product.    1. Bottle Unscrambler BREITNER BFC 8002 Operation: continuous from supply bin Bin volume / drum Ø: 1.4 m³ / 1500 mm Working height: 900 mm, left → right Material / Housing: AISI 304 stainless steel + plexiglass Safety: door switches, overload protection Power / Air: 3 × 400 V, 4 kW / 400 Nl/min at 6 bar Container size: round Ø ≤100 mm × 250 mm, larger on request Feature: blow-cleaning station with ionized air and dust extraction 2. Filling Machine BREITNER MDL 2086 Filling: mass flow, 8 stations (expandable to 12) Filling range: 100 – 2000 ml/g, up to 5,000 bottles/h Working height / direction: 900 mm, left → right Product-contact parts: AISI 316, food-grade hoses, VITON seals Tank / Pressure: 100 L, 5 bar Power / Air: 3 × 400 V, 4 kW / 150 Nl/min at 6 bar Container size: H 50–350 mm, Ø/width 50–80 mm, various shapes CIP cleaning: 8 cleaning cups, automatic spray & drain, multi-step program Extras: laminar flow, remote maintenance, additional filling valves, swiveling tray, heating system 3. Rotary Capping Machine BREITNER SRT 5044 Operation: continuous rotary, 4 capping stations Output: up to 5,000 containers/h Container size: Ø ≤100 mm, H ≤300 mm Working height / direction: 900 mm, left → right Drive / Tools: servo motor, 0,3-3,5 Nm; BREITNER capping tools Power / Air: 3 × 400 V, 4 kW / 100 Nl/min at 6 bar Control: B&R controller, touchscreen, 200 format memories, password-protected Safety & inspection: door switches, overload, “No bottle – no closure,” optical cap check, reject system Extras: servo vertical movement, torque monitoring, fan-based cap feed, vibratory sorter VIB 8001, cap supply SFB 8001 Bjdpfoxqzmwsx Aaaolf

Condition: used, Year of construction: 1998, operating pressure: 100 bar, overall weight: 590 kg, rotational speed (max.): 600 rpm, power: 30 kW (40.79 HP), URACA high-pressure pump unit Type: RS606E/100 URACA 3-plunger pump KD606 Flow rate: 138 l/min with 30 kW electric motor Blsdpfx Aov Hqpqeaaef

Condition: used, Length 3500 mm Stainless steel structure Complete with   - Side guides   - Support feet   - N° 2 adjustable speed motors   Bledpsx Iv Tpofx Aaajf - Chains width 82.6 mm   - Motorized device with idle rolls for round bottle sliding

Condition: good (used), WAM mixer, paddle mixer Manufacturer: WAM Type: WBHX1200M/0CK Completely constructed from stainless steel Motor power: 15 kW Mixing shaft speed: 111 rpm Equipped with a completely new drive system (electric motor, gearbox, belt drive, shaft coupling, stainless steel motor base) Fitted with a new pneumatic actuator for discharge flap opening Various electrical components present (excluding control cabinet) Mixing capacity: liters Bsdpjxnkghsfx Aaaslf See our other listings VMA Wekerom

Condition: good (used), Year of construction: 2008, functionality: fully functional, A fully automatic round capper from ALWID is offered of the type FAVORIT 4SK The details of the machine: - Stainless steel design (frame, paneling, etc.) - Fully automatic cap sorting and cap feed - 4 screwing heads with magnetic coupling and torque setting - The machine is suitable for line integration - Output: 2,000 - 8,000 bottles / h - Bottle height: 90 - 300mm - Suitable for plastic screw caps (three formats available) Bledpjtlttfjfx Aaajf The machine was used to process glass and plastic bottles with plastic screw caps. The machine is currently not in use and can be viewed at the production site in Thuringia by arrangement. The machine layout including dimensions is attached as a PDF document.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Manufacturer: PFM Model: Zenith Inox Year: 2002 Blodoxapzzjpfx Aaaof Output: approx. 50 pcs/min Electrical power: 4.5 kW Weight: 680 kg Optional: Piston filler with heated tank for processed cheese Condition: good, fully functional