High-pressure pump unit

Uraca Plungerpumpe KD 606

Condition: new, Year of construction: 2022, overall weight: 1,100 kg, total length: 1,330 mm, total width: 1,090 mm, total height: 780 mm, pressure: 600 bar, water consumption per time unit: 43 l/min, water pressure: 600 bar, Equipment: documentation/manual, Sugino high pressure plunger pump not Uraca , Hammelmann , Woma Sugino high pressure plunger pump Type JPGP-66046 Model JCP170PS-140 D26 Water pressure 60 MPa Water pressure 600 bar Flow rate 43 L/min Weight 1100kg Kjdpfjr A Dm Ijx Ah Uefa The set includes a set of gaskets and consumables for the pump

Year of construction: 1996, condition: good (used), machine/vehicle number: 96.01112.1496, Stationary high pressure pump unit Hammelmann HDP 112 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Working pressure: 300 bar Delivery rate: 153 l/min. Drive speed: 1500 rpm. Drive power: 90 kW with VEM motor 90 kW 3~motor, IP55, with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: ca. 2300x1000x1400 mm weight: approx. 1500 kg Year of manufacture: 1996 Kfsdpshtnnijfx Ah Uja Condition: in good used condition.

Condition: used, 5tSWF Krantechnik GmbH Kedpfedc A R Tex Ah Uefa

Condition: excellent (used), Kaeser Omega 83 P blower stage, fully refurbished, 12-month warranty, HB 1300 Kfodponcd Apefx Ah Uea

Year of construction: 1970, condition: not inspected (used), Offered here is a balancing machine from the company Trebel. The machine has a solid steel protective hood. For rebuilding, because the control cabinet is missing! Kfjdpfx Ahshikdws Uea Technical data: Manufacturer: Trebel Type: FC4c-xn Year of manufacture: 1970/74 Normal weight range up to 400kg Max. permissible load per block: 200kg

Year of construction: 2022, condition: as good as new (ex-display), Manipulator with hydraulic height adjustment, face plate with clamping slots and manual remote control. Height (face plate horizontal): approx. 532 - 1.132mm Lifting distance/lifting time (hydraulic): approx. s = 600mm, t = 20s Swivel range of face plate: approx. +-300°. Height (Pl.-sch.vertical axis): approx. 709mm Dimensions face plate: Ø1.200mm x 40mm, 6x clamping slots Speed of the main axle: approx. 2.0 rpm (other Torque main axis of rotation: approx. 7,500 Nm Face plate speed: approx. 2.5 rpm Face plate torque: approx. 1,500 Nm Kfodpfofw Ah Rsx Ah Uoa

Condition: like new (used), Year of construction: 2014, operating hours: 15,000 h, Atlas Copco compressor stage after refurbishment. Kfsdpsmzbdwjfx Ah Uea

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. turning diameter max : 1400 mm face plate : 1250 mm Automatic turret head spindle speed : 3,5-180 rpm Kjdovi Hryjpfx Ah Usfa feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Further data see data sheet Machine documentation available . Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition .

Condition: used, Year of construction: 1965, honing diameter 80 mm Kfodpfot Hwupox Ah Uoa stroke 280 mm throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of honing machines available. Please let us know what you need.

Condition: ready for operation (used), functionality: limited functionality, disc diameter: 525 mm, Weight approx. 1,900 kg Dimensions (LxWxH) approx. 1,800x1,500x2,200 mm Working disc diameter 525 mm Largest disc ring width 175 mm Largest workpiece dimension 170 mm Speed of the working disc 45/70/90/140 rpm Main drive performance 4.0 kW Connection 400V/50Hz Emergency stop switch Conventional control with control panel Full-fledged lapping machine, conventional control Kjdpoh Invrefx Ah Ujfa