Screw compressor

Atlas Copco 45FF

Condition: ready for operation (used), Year of construction: 2006, MAKE: ATLAS COPCO MODEL: GA45 FF Serial no.: API591201 Year: 2006 Power (kW): 45 Output (m3/min): 7.28 Pressure (bar): 7.8 Operating hours (load/total): 8054/20214 Ndodpfx Asy Aux Teh Sjc Frequency inverter: no Built-in dryer: yes Heat exchanger: no Cooling (air/water): air Mounted on tank: no Connection: 2'

Condition: ready for operation (used), Year of construction: 2008, A screw compressor Atlas Copco with integrated refrigerated dryer including a 500l compressed air receiver is offered. Motor power: 22kW (30hp), Volume flow: 3.84m³/min (64l/s), max. operating pressure: 12.8bar, Operating hours: 29897h, Refrigerant dryer: R134a, 0.95kg. The compressor was serviced annually without interruption by a qualified specialist company. Documentation available. Inspection possible by appointment. Ndjdpfx Ahozh Nizs Ssc

Condition: excellent (used), Brand: CORREA Model: CF-22 PLUS Cnc: HEINDENHAIN 530 Table dimensions : 2.000 x 700 mm Number of slot: 5 Slot dimensions: 22 mm Axis travels (X,Y,Z) : 2.000 x 800 x 800 mm Nodpfsyxr Azox Ah Sjdc Head type : Universal manual Tool camping : Hydraulic Taper : ISO 50 (DIN 69871) Speed range : 4.000 rpm Spinale power : 22 kw Rapid feeds : 12.000 mm/min Maximum weight on table : 4.000 kg Machine dimensions : 6.605 x 3.315 x 2.730 mm Machine weight : 10 tn Machine equipped with : Fairing Chip conveyor Electronica handwheel

Year of construction: 1999, condition: used, Max. drilling diameter in steel, strength 600MPa: 50mm, max. drilling diameter in cast iron, strength 250MPa: 60mm, max. boring diameter (with guide) in steel, 600MPa: 200mm, max. thread in steel, 600MPa: M50x1.5, max. thread in cast iron, 250MPa: M60x2, spindle reach: 320-1250mm, pitch circle of holes: 1208-3039mm, distance from spindle axis to base plate: 320-1380mm, max. arm height adjustment: 750mm, max. drill carriage travel on arm: 930mm, arm swivel range: +/-180°, spindle head diameter: 75h6, spindle diameter at front bearing: 55mm, length: 2900mm, width: 1120mm, height: 3271mm, weight: 4.2t, with documentation. An on-site inspection is possible. Ndsdszuzzispfx Ah Soc

Condition: excellent (used), Year of construction: 2014, operating hours: 4,293 h, MANUFACTURER ATLAS COPCO MODEL GA30FF S/N API325798 YEAR 2014 POWER (kW) 30 OUTPUT (m3/min) 5.4 PRESSURE (bar) 7.25 HOURS (DOC/TOTAL) 4293 FREQUENCY INVERTER no Nsdpfjylwlmjx Ah Sodc INTEGRATED DRYER yes, R134a 0.54kg HEAT EXCHANGER no COOLING (AIR/WATER) air ON RECEIVER TANK no

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, spindle speed (max.): 3,150 rpm, table width: 630 mm, table load: 3,000 kg, table length: 1,700 mm, mount diameter: 50 mm, total height: 2,300 mm, total width: 2,300 mm, total length: 4,700 mm, rotational speed (max.): 3,150 rpm, overall weight: 6,000 kg, 2013 Overhauled by REIDEN SWISS New regrinded Nedjzvfiaepfx Ah Ssdc New iTNC530 New Hr410 Handwheel New CE-Safety  New Milling head gears and bearing New LS186C Glas scales New Blum TC60 3D taster Geomtrical DIN 8615 ! Overhauling cost CHF 250k X-Axis: 1300mm Y-Axis: 630mm Z-Axis: 630mm Table Length: 1700mm Table Width: 630mm Table load: 3000 Power on spindle:16kW Spindle speeds: 3150Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Length: 4700mm Width: 2300mm Height: 2300mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1994, tool diameter: 60 mm, spindle mount: MK 5, rotational speed (max.): 1,460 rpm, total width: 1,100 mm, total length: 2,300 mm, total height: 2,400 mm, table width: 580 mm, table length: 1,400 mm, overall weight: 2,700 kg, Arm Length: 1200mm Max. drill Ø cast: 60mm Max. tap Ø: 40M Max. drill Ø steel: 50mm Stroke pinole: 110mm Max. distance spindle - table:1165mm Min. distance spindle - table:300mm Floor / table area: 1400 x 580mm Speeds / ranges: 1460Rpm Spindle Taper: 5ISO/Bt/Mk Length: 2300mm Ndedpfx Ahszvfn Ne Sec Width: 1100mm Height: 2400mm Weight: 2700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, total height: 2,700 mm, total width: 3,000 mm, total length: 5,300 mm, Year of manufacture: 1992 Colour: White Empty weight: 11.000 kg Price: On request - Year: 1992 - Serial number: 9220212 - Drive system: Conventional - Bed milling machine model: Movable table - Number of axes [pcs]: 3 - X-axis travel [mm]: 3200 - Y-axis travel [mm]: 1000 - Z-axis travel [mm]: 1000 - B-axis rotation [°]: 360 - C-axis rotation [°]: 360 - Table length [mm]: 3500 - Table width [mm]: 800 - Tool holder: ISO50 - Main spindle power [kW]: 15 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2000 - Max. workpiece weight [kg]: 4000 - Options: Digital readout - └ Type of digital readout: Sony 3-A - Transport dimensions: 5300mm x 3000mm x 2700mm (l x w x h) Ndjdpfxozwn Ege Ah Soc - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2019, operating hours: 43,002 h, functionality: fully functional, power: 26 kW (35.35 HP), volume flow: 294 m³/h, pressure (max.): 12.75 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Atlas Copco GA26VSD+FF screw compressor Inverter and dryer integrated Nedpfoz Nh Svex Ah Sodc 26 kW 12.75 bar 4.90 m3/min Year of manufacture: 2019 Operating hours: 43,002 h

Condition: excellent (used), Year of construction: 2013, ATLAS COPCO GA30+ screw compressor, machine after service Technical specifications: Capacity: 4.94 m³/min; 30 kW motor; Maximum pressure: 10 bar; Year: 2013 Hours: 10,814h!!! Price: 19,500 net 23,985 gross The compressor is fully operational, ready for work, with warranty. We provide service. Nedpfew Nh H Aox Ah Ssdc Below is a link to a video.