Oil-injected rotary screw compressor with integrated refrigerant dryer ATLAS COPCO GA15 FF

ATLAS COPCO GA15 FF

Condition: excellent (used), Year of construction: 2016, operating hours: 37,866 h, functionality: fully functional, Screw compressor GA15VSD+FF, 15 kW with 13 bar and 2.51 m3/min. Integrated dryer and frequency converter. New compressor unit in 2022. Itodpjx Irt Sofx Ah Ujr

Year of construction: 2006, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator -Electric start -Power: 3.8 kVA 50 Hz -petrol engine -only: 95 operating hours -2x Schuko: 230 Volt, 1 socket slightly damaged -Dimensions of unit: 580/530/H615 mm Itjdpfx Asflmm Seh Ujr -Weight: 79 kg

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Itodpfx Asxdc Uvsh Ujr

Year of construction: 2000, condition: ready for operation (used), Operating pressure: 7.75bar, air volume flow: 40.4l/s, power: 15kW, speed: 3000rpm, machine weight: approx. 450kg. On-site inspection is possible. Iedjwfg Hhepfx Ah Ujtr

Condition: good (used), HURON MU4 milling machine Table surface 1450 x 460 5 x 16 mm T-slots Longitudinal travel 1300 mm Transverse travel 700 mm Vertical travel 500 mm SA40 spindle Itjdou Hifzepfx Ah Uor 27 spindle speeds 30 to 2,066 rpm Rapid traverse 2,800 mm/min Weight capacity 1500kg Max. head clearance 530 Spindle motor 8.8 Kw Feed motor 3.5 HP Cooling by electro-pump 1.6 HP Overall dimensions: L x W x H 2,000 x 2,000 Approximate weight 4 Tons

Condition: like new (used), Year of construction: 2013, Grafisk Maskinfabrik Rewinder/Slitter Iedpfx Ahsipvhnj Uetr

Year of construction: 2001, operating hours: 123 h, condition: ready for operation (used), machine/vehicle number: 123, Metal silo for storage of woodchips, etc. Technical description: Iedpfx Asftdv Ueh Uotr silo DM: 5m Height: 8 m with outfeeding unit (screw conveyor connection to output) Cappacity: 42 m3 With outfeeding transport screw conveyor to the top of the silo building. Already dismountled, visit possible by appointment at our warehouse H-2013 Pomáz/Hungary.

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25      Working hours: 47.000 only         Machine was regularily maintained       Machine equipped with:            Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request Itjdsrkgy Ujpfx Ah Usr

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 302827, Federhenn rod-profile machining center (drilling and milling) SBZ 100G - TO BE SOLD IN LINE WITH 1 SCHIRMER NC-SAW 1000-G4 YEAR 2014 (COMPLETE LINE) SEE SCHIRMER ADVERTISMENT....!! NC feeder device with gripper max 200 m/min - max profiles 3500 mm.. The gripper can be adjusted pneumatically in 2 axes for adaptation to different profile geometries. Machining station designed as a G-module with 2 servo axes in Y and Z direction. Prepared for accommodating up to 14 processing units for complete processing of PVC, frame, post and frame profiles - outfeeder with table 2500x1500 mm.. PC-control C 6140, display, software SBZ 100G, PLC+NC. Modem remote diagnosis. Loading magazine with 9 places (9 profiles 3500 mm) designed for frame profiles max 127 mm width. Barcode scanner - Horizontal belt conveyor with 9 transport beams that can be adjusted continuously. 18 m/min - 3000 x 2400 mm - units: screw unit, 2 x drilling unit for dowel or post holes, 2 x drilling unit for fixing holes 16,750 rpm, 2 x additional processing (marking the closing part), drilling unit for front door fittings (opens inwards), drilling unit for olive hole drilling (3 sp), milling unit lock case. 2 pcs milling unit for milling and drilling drain slots and ventilation holes. 1 ditto obliquely arranged. 1 swivel device (MD and AD window systems. Milling unit for milling PZ and handle hole pattern Iedownpa Nopfx Ah Uetr

Condition: used, Year of construction: 2001, functionality: fully functional, Year: 2001 - technically efficient, ready to work (directly from the client) - corner cleaning machine SV 494 CNC - for-head welding machine AKS 6110 - turning station - cooling station Iedpfx Aetr Duksh Uetr - flash limitation: 0.2 - 2 mm