Screw compressor 3.2-6.9 m³/min (defective)

Atlas Copco GA18VSD FF

Condition: used, functionality: unexamined, Compressed Air System Atlas Copco Consisting of: Compressor GA18 Plus, year of manufacture 2007 Compressor GA11VSD+FF, year of manufacture 2017 Control unit ES 6 Incl. 1000 l air receiver GA11VSD+FF, year 2017, operating hours: approx. 20,000 GA18 PLUS, year 2007, operating hours: approx. 58,000 Gjdpsvx Nmfsfx Abujbh Buyer is responsible for professional dismantling. Forklift is provided.

Condition: used, mileage: 24,538 km, power: 120 kW (163.15 HP), first registration: 08/2020, fuel type: diesel, overall weight: 3,050 kg, next inspection (TÜV): 08/2022, color: white, emission class: euro6, Equipment: ABS, air conditioning, had accident, navigation system, soot filter, * Vehicle No.: - 73 * Euro 6 green emissions sticker * Extra long panel van * Automatic climate control * Navigation system with display Gbsdelxlmbjpfx Abush * Reversing camera * Front and rear parking sensors * Cruise control * Multifunction steering wheel * Heated driver's seat * 6-speed manual transmission * 3 seats * Partition wall * Load compartment lining on floor and walls * Electric front windows * Central locking system * Airbag * ABS * ASR (traction control) * German vehicle, single ownership * Original mileage * !! Vehicle is operational and located on our premises !! ---- -> Please note that viewings are only possible by prior appointment. Thank you for your understanding. -> Sale is only to traders or for export. The above data, photos, and equipment list are for general vehicle identification purposes only and do not constitute a guaranteed feature in the sense of contract law! All information/equipment details are WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! The equipment list does not form part of the contract and must be individually verified by each interested party on site prior to purchase. Subsequent complaints will not be accepted.

Condition: excellent (used), Year of construction: 2004, ATLAS COPCO GA18VSDFF screw compressor, machine with frequency inverter and air dryer, after service. Technical specifications: Capacity: 3.35 m3/min; Motor power: 18.5 kW; Max. pressure: 12.80 bar; Year: 2004; Gbsdpfx Aoyfpbgsbuoh Operating hours: 12,831 h; Price: 17,500 net / 21,525 gross The compressor is fully operational, ready for work, with warranty. Service provided. Link to video below.

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Gedpfx Abju Rptyoujbh Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Condition: new, - Semi-automatic - Hydraulic - Infinitely adjustable band saw speed - Double miter - Hydraulic clamping of the miter setting - Hydraulically adjustable sawing pressure - Fully hydraulic material clamping - Hydraulically adjustable clamping pressure - Cooling system - Automatic switch-off - Automatic switch-off of the machine at open cover, torn belt, reduced belt tension Gbodovkkl Tepfx Abujh - Emergency stop - Documentation - 400V

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, type of input current: AC, Equipment: documentation/manual, TAMGLASS / GLASTON HTF ProE – 2448-ADS-R 2400 x 4800 mm, 3 – 19 mm, Right – Left Glass tempering furnace (for Low-E glass) Year: 2006 Gsdpfx Abextf Dfsujbh Noise reduction cabin included 160 kW compressor for 3 mm glass included In good condition.

Condition: used, Year of construction: 2019, turning diameter 400 mm turning length 584 mm greates pass round over bed 750 mm control Siemens 828 D Shop Turn spindle passage 81 mm spindle speed: 3500 U/min spindle motor 18,5/22 kW Gjdpfx Aeww Nazobuebh max. torque on the spindle 410 Nm no. of tools in turret 1 12 BMT 65 driven stations 12 BMT 65 speed of driven tools 5000 U/min drive milling spindle MK 5 kW y-axis +/- 60 mm rapid traverse 30/30/10 m/min tail stock MK 5 range L-W-H 4,6 x 1,9 x 2,1 mm weight of the machine ca. 6,65 t CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck Kitagawa Ø 250 mm - Chip conveyor - partscatcher with box into door - signal lamp - 2 +2 driven toolholder - some fixed toolholder - boxway system - tool measuring - programmable tailstock - coolant 23 bar - bigger coolant tank 225 ltr. - double cartridge filter - coolant gun - two steps coolant pressure

Year of construction: 2022, condition: as good as new (ex-display), Manipulator with hydraulic height adjustment, face plate with clamping slots and manual remote control. Height (face plate horizontal): approx. 532 - 1.132mm Lifting distance/lifting time (hydraulic): approx. s = 600mm, t = 20s Swivel range of face plate: approx. +-300°. Height (Pl.-sch.vertical axis): approx. 709mm Dimensions face plate: Ø1.200mm x 40mm, 6x clamping slots Speed of the main axle: approx. 2.0 rpm (other Torque main axis of rotation: approx. 7,500 Nm Face plate speed: approx. 2.5 rpm Face plate torque: approx. 1,500 Nm Gbsdpfefw Ah Rsx Abush

Condition: new, 1 brand new universal milling head, HURON system Make: EMENA Model: V 0, ISO 40, standard version Technical specifications: - Taper: ISO 40 - Outreach: 270 mm - Rated drive power: 5 HP - Max. speed: 1800 rpm - Weight: approx. 32 kg Gbodpebpmv Sofx Abush Design: Standard version, with adapter plate / mounting flange, head side finished, machine side unfinished, for subsequent installation on conventional, NC, or CNC milling machines or any type of boring mill, HURON system Option: - Adapter plate, head side finished, machine side with machining allowance - Raised version Delivery time: approx. 3 months after receipt of order and payment Images are similar! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A4 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 430 Sawing capacity flat 90 430 x 430 mm Feed range 0 - 600 mm Multi-feed range 0 - 9999 mm Min, saw length 35 mm Gedpfju R R Avox Abujbh Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4800 mm width 2200 mm Height 2200 mm weight 5200 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.