Screw compressor

Atlas Copco GA30

Condition: excellent (used), Year of construction: 2011, MANUFACTURER: ATLAS COPCO MODEL: GA30VSDFF S/N: API431056 YEAR: 2011 POWER (kW): 30 CAPACITY (m3/min): 5.58 PRESSURE (bar): 12.80 OPERATING HOURS (DOC/TOTAL): 33,313 Nedpfeylyz Dsx Aacsku FREQUENCY INVERTER: yes INTEGRATED DRYER: yes HEAT EXCHANGER: no COOLING (AIR/WATER): air

Condition: new, Filter cloths for all filter presses in all sizes and qualities, short delivery times, ask us Location is 58762 Altena Nkodjg Azmmopfx Aaceu

Condition: excellent (used), Year of construction: 2014, operating hours: 4,293 h, MANUFACTURER ATLAS COPCO MODEL GA30FF S/N API325798 YEAR 2014 POWER (kW) 30 OUTPUT (m3/min) 5.4 PRESSURE (bar) 7.25 HOURS (DOC/TOTAL) 4293 FREQUENCY INVERTER no INTEGRATED DRYER yes, R134a 0.54kg HEAT EXCHANGER no COOLING (AIR/WATER) air ON RECEIVER TANK no Nkodpfx Ajylwlmsacsu

Condition: used, Year of construction: 1998, operating hours: 30,559 h, functionality: fully functional, overall weight: 825 kg, power: 30 kW (40.79 HP), fuel type: electric, volume flow: 312 m³/h, operating pressure: 8 bar, pressure (max.): 8.5 bar, noise level: 70 dB, Equipment: documentation/manual, refrigerant dryer, type plate available, ❇️ Atlas Copco GA30 FF Screw Compressor – 30 kW, 8.5 bar, Excellent Maintenance For sale is a used but exceptionally well-maintained industrial screw compressor from the premium manufacturer Atlas Copco, model GA30 FF with integrated refrigeration dryer. The unit was built in 03/1998, has received regular servicing, and was in reliable operation until February 2022. ⸻ ❇️ Technical Data • Model: GA30 FF (with integrated refrigerant dryer) Njdpfxeykk Raj Aacjku • Year of manufacture: March 1998 • Motor power: 30 kW (approx. 40 HP) • Max. operating pressure: 8.5 bar (factory specification) • Free air delivery (FAD): approx. 5.2 m³/min (≈ 312 m³/h) • Connection: 400 V / 50 Hz / 3~ (5-pin) • Fuse protection: 3 × 63 A • Operating hours (at last service): 30,559 h • Weight: approx. 800–850 kg ⸻ ❇️ Maintenance & Condition The compressor was last professionally serviced by DF Druckluft-Fachhandel GmbH on 14.02.2022 with the following parts replaced: • Oil plug • Solenoid valve • Intake regulator kit Since then, the unit has not been operated. It was immediately prepared for decommissioning after servicing and is therefore in ready-to-operate condition. The compressor was stored dry and protected indoors. ⸻ ❇️ Features & Equipment • FF model: integrated refrigeration dryer for dry compressed air – ideal for sensitive applications such as spray painting or control air technology • Elektronikon® controller – user-friendly control panel with operating data storage • Sound insulation enclosure (industrial version) • Steel housing – transportable by pallet truck or forklift ⸻ ✅ Ideal for Workshops · Production facilities · Metal and woodworking · Tire services · Sandblasting · and much more ⸻ ❇️ Location & Loading • Location: 71083 Herrenberg (near Stuttgart) • On-site loading assistance available (forklift on site) • Inspection by arrangement is welcome ⸻ ❇️ Price & Contact Price: €3,490 (final price) No VAT will be charged according to §19 UStG. ———— ‼️ Please also check my other listings. It’s worth it! Viewing and collection in 71083 Herrenberg. ⚠️ Shipping (by freight forwarding) or delivery possible at buyer’s expense.

Condition: used, System: used piston diaphragm pump / pump Type: HMD-G-50-500 Nsdpfx Aajdkdi Tocoku Flow rate: 40.0 m3/h Pressure: 1,6 MPa

Condition: excellent (used), Year of construction: 2006, MANUFACTURER: ATLAS COPCO MODEL: GA30VSDFF SERIAL NO.: API422341 YEAR: 2006 POWER (kW): 30 CAPACITY (m³/min): 4.58 PRESSURE (bar): 12.80 Njdpfx Aeyifb Ioaceku

Condition: excellent (used), Year of construction: 2016, MANUFACTURER: ATLAS COPCO MODEL: GA30VSDFF PLUS S/N: API830397 Year: 2016 Power (kW): 30 Output (m3/min): 5.84 Pressure (bar): 12.75 Nedoyh Ugkepfx Aacjku Operating hours (documented/total): Frequency inverter: yes Built-in dryer: yes, R410a 1.1kg

Condition: excellent (used), Year of construction: 2006, sieve 6 mm engine 2x90 kW ca. 660 mm Capacity ca. 3.000 - 5.000 kg/h Number of press rollers 2 Nkedsyi Ht Ijpfx Aacju Münch RMP 660 pellet press for producing wood pellets and biomass pellets from sawdust, wood chips, and other organic waste materials. The machine is suitable for industrial pellet production with high pressing performance and consistent pellet quality. Ideal for wood processors, sawmills, and biomass companies.

Year of construction: 1994, condition: ready for operation (used), A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible. Nsdpsx Ih D Tofx Aaceku

Condition: ready for operation (used), An inspection is possible. Nkodpfx Aaon D Hbnjcju

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions Nsdou Rptyopfx Aaceku

Condition: good (used), Year of construction: 2008, MANUFACTURER: ATLASCOPCO MODEL: GA30 PLUS Serial Number: API595399 Year: 2008 Power (kW): 30 Capacity (m3/min): 4.8 Pressure (bar): 10 Operating hours (documented/total): Frequency inverter: no Built-in dryer: no Nkjdpfjyhn R Sjx Aacsu Heat exchanger: no Cooling (air/water): air

Condition: good (used), Year of construction: 2002, machine/vehicle number: AII271328, overall weight: 560 kg, volume flow: 297 m³/h, pressure (max.): 7.5 bar, Equipment: refrigerant dryer, type plate available, ATLAS COPCO GA30FF Njdpfjvr D N Ujx Aacoku Technical data : S/N :AII271328 YEAR: 2002 CAPACITY (kW): 30 OUTPUT (m3/min): 4.95 CIS (bar): 7.5 INVERTER: no BUILT-IN DRYER: yes EXCHANGER :no COOLED (AIR/WATER): air ON TANK :no

Condition: used, Year of construction: 2009, x-travel 1.800 mm y-travel 700 mm z-travel 700 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 25 / 35 kW max. Torque 130 / 87 Nm tool taper HSK A63 DIN 69893 swivellable B: +/- 100 ° table surface area 2.100 x 700 mm max. table load 1.500 kg number of T-slots 7 table diameter 750 mm max. table load 500 kg number of T-slots 7 rotatable C: 360 ° number of toolpositions 30 pos. tool taper HSK A63 DIN 69893 max. tool weight 6,0 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm change-time chip to chip 7,6 sec rapid traverse ( X / Y / Z ) 40 m/min Accelaration 4 m/s² feed speeds max. 40.000 mm/min Feed force ( X / Y / Z ) 8 kN total power requirement 70 kVA weight of the machine ca. 13,0 t Nkjdpfxoyhhtgj Aacou dimensions of the machine ca. 7,0 x 6,2 x 2,8 m 5-Axis CNC - Travel Column Milling Machine DECKEL MAHO - DMF 180 New Design - Swivel-Head (B-Axis) - integrated rotary-table - internal coolant system - Operating-Hours: Spindle-Runtime: ca. 10.000h

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Screw Compressor Manufacturer: Atlas Copco Model: GA30 VSD Year of manufacture: 2013 Stepless speed control Operating hours: approx. 46,980 h Power: 30 kW Nkedjx U D Smepfx Aacou Air flow: 5.58 m³/min Weight: 530 kg Max pressure: 13 bar