Screw compressor GA30VSD+FF

Atlas Copco GA30VSD+FF

Condition: excellent (used), Year of construction: 2011, MANUFACTURER: ATLAS COPCO MODEL: GA30VSDFF S/N: API431056 YEAR: 2011 POWER (kW): 30 CAPACITY (m3/min): 5.58 PRESSURE (bar): 12.80 Rbjdpfjylyz Dsx Aaasw OPERATING HOURS (DOC/TOTAL): 33,313 FREQUENCY INVERTER: yes INTEGRATED DRYER: yes HEAT EXCHANGER: no COOLING (AIR/WATER): air

Condition: used, Year of construction: 2000, cutting width 92 cm feeding depth 92 cm feeding high max. 12 cm Rbsdpfxex Dc Txe Aaasw serial no. 72739

Condition: excellent (used), Year of construction: 2006, MANUFACTURER: ATLAS COPCO MODEL: GA30VSDFF SERIAL NO.: API422341 Rbjdpfx Aasyifb Isajw YEAR: 2006 POWER (kW): 30 CAPACITY (m³/min): 4.58 PRESSURE (bar): 12.80

Condition: excellent (used), Year of construction: 2016, MANUFACTURER: ATLAS COPCO MODEL: GA30VSDFF PLUS S/N: API830397 Year: 2016 Power (kW): 30 Output (m3/min): 5.84 Pressure (bar): 12.75 Operating hours (documented/total): Rbjdpfx Asyh Ugkjaaow Frequency inverter: yes Built-in dryer: yes, R410a 1.1kg

Condition: excellent (used), Year of construction: 2003, Technical data: Cutting width: 115 cm Electronic control Hydraulic clamp Safety light barriers Solid and stable construction Complete set of tools and documentation Rjdpfx Asxtwyfoaaebw

Year of construction: 2012, condition: excellent (used), Agfa C95 washout station -good condition Rsdpfsirnmcex Aaaebw

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm Rbjdpfx Aaohzbipjajw - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Redpfx Aaexdc Uvsasbw

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, STC-Ref:G-022-7695 Heidelberg SM-52-2 ,Year: 2012 ,Impressions: approx. 27 Mio. format: 370x520 mm, 2 colors equipped: - Minus-version - powder sprayer Mediprint - Technotrans alpha cooling, metering unit - Alcolor Automatic film dampening - Autoplate: semi-automatic plate change system - Cptronic Rjdpfx Asyv E Hheaajbw - ink-roller wash device managed from console - wash device for impression cylinders - blanket wash-up device - electronical double sheet control - chromed cylinders --> available: 04/2026

Condition: used, Imprinting Unit Numbering- & Perforation Unit Heidelberg PM / SM 52 N&P Rsdjx Uz Tzjpfx Aaasbw Eindruckwerk mit Nummerier- & Perforiereinrichtung / Imprinting Unit Numbering- & Perforation Unit Heidelberg PM / SM 52 N&P Year 2001 - SN. 361748 Eindruckwerk / Imprinting Unit Nummerierwelle mit 4 Sitzringen / Numbering shaft with 4 mounting rings 2 Perforierarme / 2 Perforating arm 2 Nummerierwerke / 2 Numbering boxes 1 Schaltkurve links und rechts / 1 cam left and right Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test