15 units of Atlas Copco GA90 available from stock!

Atlas Copco GA90

Condition: refurbished (used), Year of construction: 2006, power: 90 kW (122.37 HP), fuel type: electric, type of cooling: air, We offer this refurbished Atlas Copco GA90 rotary screw compressor, year 2006. The compressor was imported from Europe and has not been operated in Ukraine. Comprehensive repairs have been carried out, including replacement of the screw block bearings and gearbox (multiplier) bearings, shaft seal replacement and bushing, replacement of the flexible coupling for torque transmission, replacement of the electric motor bearings, as well as replacement of all filters and oil. A new inlet valve with a new solenoid valve has been fitted. The thermostatic valve has been overhauled with a new repair kit, as well as the minimum pressure valve, oil-stop valve, check valve with repair kits replaced, and the condensation drain valve has also been serviced. A new Elektronikon compressor control unit has been installed. The hydraulic hoses have been replaced and the oil system has been cleaned. Dodpfoyxy Dasx Aaajcf Delivery across Europe can be arranged.

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Dcjdpfx Asxdc Uveaajf

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, overall weight: 1,654 kg, Equipment: refrigerant dryer, type plate available, Atlas Copco air compressor, model: GA90VSDFF, oil-injected screw compressor with frequency converter (VSD), with dryer, pressure: 12.7 bar, air flow: 293.1 L/s, motor: 3508 rpm, year: 2016, weight: 1654 kg. Shipping throughout Europe not included, VAT not included. Reference: 1167 Dodpsyxpz Usfx Aaaocf

Condition: good (used), Year of construction: 2012, MANUFACTURER: ATLASCOPCO MODEL: GA90FF S/N: API613191 YEAR: 2012 POWER (kW): 90 Dcsdsyll Ddopfx Aaasf CAPACITY (m3/min): 16.21 PRESSURE (bar): 10 HOURS (DOC/TOTAL): 59581 FREQUENCY INVERTER: no BUILT-IN DRYER: yes HEAT EXCHANGER: no COOLING (AIR/WATER): air

Condition: used, Year of construction: 2007, Double-spindle machining center in 5-axis design (on both sides) Travel x/ y/ z = 600/ 600(975) / 500 mm Number of spindles 2 Spindle distance 600 mm Rapid traverse 45 m/min Spindle speed up to 17,500 rpm Drive power 38 kW Tool magazine 2 x 72 tool positions HSK 63 tool holder CNC control Siemens 840D 1 x tool breakage control 2 x clamping bridge support H75 mm 2 x clamping bridges 5th axis Knoll coolant system, 70 bar Dcodpfx Astgu Ixeaasf 1 x chip conveyor KB1000 1 x drill head indexing 2 x tool planning system control 2 x A/U axis torsion compensation upgrade kit

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: API628950, Technical characteristics: Core Specifications Attribute Motor Power Max Operating Pressure Free Air Delivery (FAD) Cooling Type Noise Level Drive Type Integrated Dryer Voltage Dimensions (L×W×H) Dedpsxx Snbjfx Aaajcf Weight Performance & Features Elektronikon® Touch Controller: Advanced microprocessor for monitoring, control, and remote access. RDX Synthetic Oil: Long-life lubrication for reduced maintenance. Energy Efficiency: Specific power as low as 18.9 kW/100 CFM, depending on load. Integrated Refrigerated Dryer: Ensures clean, dry air with minimal pressure drop. Oil-Water Separator: Built-in for environmental compliance and air purity. Reliability & Maintenance IP55-rated motor: Dust and water-resistant for harsh environments. No-loss condensate drain: Prevents compressed air waste and reduces downtime. Sound-insulated bodywork: Minimizes noise and vibration Machine status: WORKING

Year of construction: 2008, condition: ready for operation (used), Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible. Dcjdpoxmkc Tjfx Aaasf

Condition: good (used), Year of construction: 1989, machine/vehicle number: AN-No.: 89.04.019 A, 5 pieces Jakob Müller Frick AG NF 42 in 5x 4/42mm with Müdata, Mütrans, without gate, super clean from Germany 2nd hand NF42 in 4/42mm from 1988-1990 Dcoder I Am Hepfx Aaaef AN. No.: 88.04.017 H ex.Alge, Müdata, 16 stocks very clean 7.000 Euro AN. No.: 88.04.169 D ex.Alge, Müdata, 16 stocks very clean 7.000 Euro No. 213 AN. No.: 89.04.019 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro No. 223 AN. No.: 89.04.046 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro AN. No.: 90.00.066 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: API628950, Technical characteristics: Core Specifications Attribute Value Motor Power 90 kW (approx. 125 hp) Max Operating Pressure 8.6 bar to 13 bar (125–188 psi) Free Air Delivery (FAD) ~565–588 CFM; 125 psi Cooling Type Air-cooled Noise Level ~74 dB(A) Drive Type Direct drive Integrated Dryer Yes (Full Feature “FF” version) Voltage 400V / 50Hz or 460V / 60Hz Dimensions (L×W×H) ~2179 × 1300 × 1968 mm Dedpeyam Tcjfx Aaajcf Weight ~1500 kg Performance & Features - Elektronikon® Touch Controller: Advanced microprocessor for monitoring, control, and remote access. - RDX Synthetic Oil: Long-life lubrication for reduced maintenance. - Energy Efficiency: Specific power as low as 18.9 kW/100 CFM, depending on load. - Integrated Refrigerated Dryer: Ensures clean, dry air with minimal pressure drop. - Oil-Water Separator: Built-in for environmental compliance and air purity. Reliability & Maintenance - IP55-rated motor: Dust and water-resistant for harsh environments. - No-loss condensate drain: Prevents compressed air waste and reduces downtime. - Sound-insulated bodywork: Minimizes noise and vibration. Machine status: WORKING

Condition: good (used), Year of construction: 2000, Screw compressor Dedpfx Aovi E Uyeaaocf Manufacturer: Atlas Copco Type: GA 90 Year of construction: 2000 Power: 94 kW Pressure max: 10 bar Speed: 1,487 rpm

Condition: new, functionality: fully functional, Year of construction: 2025, color: black, overall weight: 1,600 kg, empty load weight: 1,600 kg, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,500 mm, machine/vehicle number: Cafe Container Model Imbiss, Office Container | Snack Bar Container | Sales Container | Cafe Container | Model IMBISS | 240cm x 600cm | High-Quality and Flexible Solution Available products can be viewed in our warehouse and picked up directly. Our office and residential containers offer an excellent solution for a wide range of applications. They are characterized by outstanding quality, maximum flexibility, and short delivery times. Technical Details Dimensions: • Width: 240 cm • Length: 600 cm • Height: 250 cm INTERIOR AND EXTERIOR WALLS • The walls are made of C- and U-shaped, seamless, galvanized steel profiles with a thickness of 1.5–2.0 mm. • Exterior cladding: 0.50 mm thick galvanized trapezoidal sheets, coated with a wood grain finish. • Interior cladding: Clad with 12.5 mm thick plasterboard. • Insulation: 50 mm thick rock wool. ROOF CONSTRUCTION • The structure consists of C- and U-shaped, seamless, galvanized steel frames with a material thickness of 1.5–2.0 mm. • Roof covering: 0.50 mm thick, galvanized trapezoidal sheets. • Insulation: 80 mm thick glass wool. •⁠ ⁠Optional: 100mm insulation with PUR, PIR, or rock wool available •⁠ ⁠Floor: 16mm fiber cement board + PVC covering High-quality workmanship for long-term use Features: •⁠ ⁠1 room Dcodpfswg E Nqex Aaaof •⁠ ⁠Plasterboard cladding on plastered wall •⁠ ⁠1 exterior door •⁠ ⁠2 windows with flaps •⁠ ⁠2 interior LED lights •⁠ ⁠2 interior power outlets Colors: •⁠ ⁠Facade color: RAL 7016 •⁠ ⁠Frame color: RAL 7016 •⁠ ⁠Customization: Custom design possible according to customer requirements Stock & Delivery: •⁠ ⁠In-stock items: Same-day shipping •⁠ ⁠Out-of-stock items: Production time 2 to 4 weeks depending on the model •⁠ ⁠Worldwide shipping: We offer professional shipping to all countries to ensure fast and reliable delivery. •⁠ ⁠Custom sizes: Products can be manufactured according to the customer's specific requirements. Showroom address: Im Mannenberg 9a, 53557 Bad Hönningen For further information or customization, please contact us!

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: AIF074692, power: 90 kW (122.37 HP), operating pressure: 9 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The Atlas Copco GA90 FF compressor is a reliable and efficient solution designed to meet demanding industrial requirements. As an oil-lubricated model, it uses oil to ensure optimal performance and enhanced durability. Although this unit is pre-owned, it retains the quality and robustness typical of the Atlas Copco brand. With impressive rated power, the GA90 FF is perfectly suited for industrial applications where a consistent and reliable air supply is essential. Its integrated design facilitates easy installation and maintenance, reducing downtime and increasing productivity. Dcedpsxnz Najfx Aaaof Ideal for those seeking performance and reliability, the GA90 FF remains a top choice for industrial environments that require intensive compressor use.

Condition: excellent (used), Year of construction: 2015, operating hours: 67,310 h, functionality: fully functional, 90 kW at 7.5 bar and 16.87 m3/min. Built in 2015 with approximately 67,310 hours. Dsdpfx Aaswfckcjaecf

Year of construction: 2019, condition: as good as new (ex-display), ex demo HP 3D hardly used plus accessories located near London Djdpjlgwb Sefx Aaaocf

Condition: excellent (used), Year of construction: 2017, operating hours: 28,625 h, functionality: fully functional, Premium screw compressor Atlas Copco GA90+. 90 kW, 8.5 bar with 16.50 m3/min. Only 28,625 operating hours. Dedpfx Aeuqanajaajcf With heat recovery, new compressor oil and new oil filters.