ZR75VSDFF screw compressor

Atlas Copco ZR75VSDFF

Condition: ready for operation (used), Sertom brand calender, hydraulic, length 25000 mm with invitation, 2 lower rollers 300 mm, upper roller 318 mm, thickness 14 mm. 22 Kw rotation, 5.5 kw movements, 2.5 kw bunk. Overall dimensions: 600x190x210(h)cm Weight: 15,500 kg Gbsdpfsnr Npysx Abdog

Condition: excellent (used), Year of construction: 2016, 1 used rapid steam generator ----- Manufacturer: CERTUSS Type: Universal TC Capacity: 700 kg/h Maximum heat output: 459 kW Operating pressure: 10 bar Water capacity: 103.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2016 Equipped with a Certuss gas burner, gas control system, control cabinet with touch control, mounted on the boiler body, Gjdpfjwhxh Ajx Abdobg and the existing coarse and fine fittings

Year of construction: 1995, condition: good (used), MULTIVAC R-530 ID.NO. 2843 Gjdpfsu Ivwasx Abdsbg Multivac R-530 thermoformer machine with updated control system, Built-in vacuum pump & associated vacuum cleaner for waste plastic. Foil width 422 mm 4-part tool dimensions 220 x 182 mm Max depth 145 mm. Dimensions 670 x 105 cm Height 200 cm.

Condition: excellent (used), functionality: fully functional, overall weight: 1,830 kg, Year of construction: 2011, Air compressor Brand Atlas Copco Model GA75VSD FF Godpfx Aov Nw A Ajbdjbg Year of manufacture: 2011 Maximum working pressure (MAWP): 12.8 bar / 185 psi / 1.28 MPa Capacity: 14.68 m³/min Voltage: 400 V Frequency: 50 Hz Motor power: 75 kW / 100 HP Rotation speed: 2975 rpm Weight 1830 kg Dimensions 2300x1100x2000 mm Air dryer Atlas Copco Type: ID 245 Year of manufacture: 2011 Voltage: 380/400 V, 50 Hz Power 1.93 kW Weight: 150 kg Maximum air pressure: 13 bar Refrigerant: R410A Maximum refrigerant pressure: 42 bar Refrigerant temperature range: 1°C to 61°C Minimum refrigerant pressure: 1.2 bar

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, power: 160 kW (217.54 HP), input voltage: 380 V, warranty duration: 12 months, year of last overhaul: 2023, Equipment: documentation/manual, 1 pellet press make: Buhler DPAB inner diameter die 660 mm tread die 138 mm Gbedperah Evsfx Abdsg Press is equipped with 1 motor 160 KW . Press door is made of Stainless steel with overload valve in door. 2 Roll press with 2 rolls on the press overhauled in dimple or racked version Press is complete with die lifting device and tools The press is completely overhauled and equipped with new bearings and wear parts such as front and rear sliders die washer etc. Also new V-belts Also, all safety devices will be observed and appropriate switches on Friction protection , door switch and inspection hatches will be fitted.

Year of construction: 2011, condition: good (used), 1 used, well-preserved welding rotators, tank turning rolls designed for a load of 300 tonnes, consisting of 1 driven unit 1 idler unit with the following technical data: Type : PR 3000 SB total load : 300t Load per unit : 150t Roller diameter/width : 850 x 250 mm; Roller material : steel Roller centre height : 778 mm from lower edge of machine frame Rotation speed : 65-1,230 mm/min continuously adjustable Gbjdjfn Hmzepfx Abdjg Support diameter : 1.000-9.000m electrics : switch cabinet permanently attached to the machine frame of the drive unit Control : wired remote control Supply voltage : 380/400 V, 3Ph, 50 Hz The system is also available for hire (trial hire)

Condition: excellent (used), Year of construction: 1990, the machine in perfect condition very good machine This is a combo machine pelletizer and sandblasting machine (two in one) very low operation hours Gbedpfx Abshmi Ucsdeg

Condition: good (used), Year of construction: 1992, machine/vehicle number: 145 K, Offer 24018 Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drill spindle holder MK 3 - Drill spindle stroke 150 mm - 9 drill spindle speeds 104 - 1400 rpm - 2 feeds 0.1 / 0.2 mm/rev - throat depth 290 mm - max distance table - drill spindle 780 mm Gbedpfx Aeu At Thsbdjg - Table with 2 T-slots 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 1.1 / 1.3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - right - left rotation - Coolant device - Quick-action drill chuck 1-13 - lighting

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: API621725, For sale: Atlas COPCO ZR 132 compressor with filters, 125 KW Gbjdpfxjwrm T Is Abdeg

Year of construction: 2025, condition: new, In order to empty of fruit and vegetables of wood or plastic boxes in a washing machine, on a sorting conveyor or a bain-marie. The outlet amount from the box can be regulated about an infinitely variable hydraulic tilting equipment. The filling of the bin tipper is possible by means of heave stacker or hand elevating platform truck. Standard implementation: Lifting force: up to 550 kg / box Impulse engine power / elektr. Connection: 2. 2 kW/; 240 V, 3 phases, 60 hertz Weight: 350 kg Gsdpfocl Tx Dsx Abdjbg Mass: 1680x1420x1255mm Sputum width: 500 mm Duration wheel process: 15sec.