Second-hand machinery for sale (2,398)

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, grinding width: 1,350 mm, TECHNICAL DETAILS Grinding width: max. 1,350 mm Belt change side: left Grinding units Number of sanding units: 3 (1x cross belt, 2x sanding pads) Sanding pad segment width: electronic / 25 mm Unit power ratings Cross belt power: 15 kW Combination unit power: 12.5/15 kW Shoe unit power: 15 kW EQUIPMENT - Vacuum table - Sanding belt blow-off device - Linked pressure bar Cgsbvowfhgvsdrlfjt - Cleaning brush - Bütfering application control

Condition: new, Year of construction: 2024, Functionality: fully functional, load capacity: 3,000 kg, faceplate diameter: 1,020 mm, welding current (max.): 600 A, swivel angle A-axis (max.): 135 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Load capacity: 3,000 kg Center of gravity distance / Eccentricity: 150 mm / 150 mm Maximum tilt angle: 135° Tilt speed: 60 s Rotation speed: 0.033 – 0.66 rpm Dimensions of faceplate Height of top edge of faceplate (horizontal): 797 – 1,820 mm Height of faceplate rotation axis (vertical): 850 – 1,650 mm Diameter of faceplate: 1,020 mm Grooves on faceplate: 4 × 18 mm Operation Handheld remote control: Robust industrial handheld remote control with all operating functions MACHINE DETAILS Weight: 1,800 kg Installation dimensions: 2,100 × 1,300 × 1,050 mm Electrical Specifications Max. welding current: 600 A Input voltage: 380 – 400 V / 3 Ph / 50 – 60 Hz Dimensions as per sketch Total height (maximum): ~2072 mm Maximum height of the center of the axis: ~1472 mm Minimum height of the center of the axis: 650 mm Distance from floor to table top edge: 797 mm Distance from table top edge to center of the axis: 147 mm Rear foot height: 100 mm Outer diameter of rotary table: Ø1200 mm Pitch circle diameter (PCD): Ø489 mm Number of mounting holes: 4 x M16 thread Angle segments on rotary table: 120°, 45° EQUIPMENT Cgobvdewbqmdjrlfjt - Industrial handheld remote control

Condition: ready for operation (used), Year of construction: 2007, operating hours: 30,692 h, Functionality: fully functional, machine/vehicle number: L2202520, turning length: 305 mm, turning diameter: 320 mm, bar diameter: 51 mm, TECHNICAL DETAILS Cgebvdrowgltcjlfot Working area Max. cutting diameter: 320 mm Max. turning stroke: 510 mm Max. turned length: 305 mm Bar capacity: 51 mm Drive Motor power: 11 kW Control system Control system: Fanuc i-Series Turret Number of tool positions: 12 MACHINE DETAILS Machine weight: 3,500 kg Rated power: 23.68 kVA

Condition: used, 1 guillotine shear, Schechtl type MSB 300/NC, year 1982, serial no. 7119, max. sheet thickness 2.5 mm, working width approx. 2,500 mm Cgobvdrljwg D Rgofot

Condition: good (used), Year of construction: 2011, Total hours: 38,001 h. Cjbswduklovdrlfogt

Condition: used, Year of construction: 2008, operating hours: 13,000 h, Functionality: fully functional, Pfeiffer Vacuum GmbH Turbomolecular pump with electronic drive unit, ProfibusDP gateway and accessories, PM P03 020 GA, TPH 2101 P + TIC 250 Cjbvdoncd S Ujrlfogt Model Turbomolecular Pump: PMP03020G, TPH2101P Model Gateway: TIC250 Turbo molecular pump: Serial number: 14219214 YoM: 2008 Nominal connection size inlet: DN 250 ISO-K Nominal connection size outlet: DN 40 ISO-KF Flood connection: G1/8" Rated speed: 31.500/min (525Hz) Pumping speed N2: 1.900l/s Max. Prevacuum pressure N2: 1,5mbar Max. Prevacuum pressure He: 1,0mbar Max. Prevacuum pressure H2: 0,5mbar Oil: PM 016 144-T Note on condition: 1. statements on the operation hour time is about 13,000h with about 1,600 start-up and shut-down. 2. process gases: nitrogen and argon 3. process dusts: chromium nitrite and steel 100Cr6 4. the pump was stored fully functional in 2018 and externally cleaned.

Condition: used, This scaffolding is being auctioned online in our industrial auction/machinery auction, Pieger Roof + Wall, which includes roof tiles, gutters, bending machines, tools, roofing accessories, and heavy-duty shelving. You can find these and many other items on our platform. Cgsbvdjwhc Umsrlfst

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: A04-0040, TECHNICAL DETAILS Number of spindles: 9 Additional sanding unit: Yes Multiple processing: 9 spindles allow for comprehensive processing of the wood in a single pass. Surface processing: Sanding unit ensures a smooth and fine surface of the processed wood. Feed rate with sanding: 5-8 m/min Feed rate without sanding: up to 25 m/min Spindle configuration Spindle 1: bottom Spindle 2: right Spindle 3: left Spindle 4: left Spindle 5: left Spindle 6: left Spindle 7: right Spindle 8: top Spindle 9: right Sanding unit: bottom Sanding unit: top MACHINE DETAILS Dimensions: 8,230 x 1,460 x 2,200 Installation dimensions: approx. 9,276 x 2,630 x 3,000 mm EQUIPMENT Various planing heads expand the machine's flexibility and application possibilities. Cjbvdrewhlalelfsgt

Condition: used, Max. load capacity: 6300 kg, span: approx. 20,000 mm, with electric trolley, bottle hook and floor control Cgsbvdrewact Telfot

Condition: used, 1 x 3-axis CNC universal bed milling machine Lagun FBF 1200, manufactured by Lagun, type FBF 1200, year of manufacture 1991, serial no. A12056, control system by Lagun CNC, T-slot clamping table approx. 600 x 1,250 mm, travel distances approx. X: 1,100 mm, Y: 600 mm, Z: 600 mm, swiveling milling head Cobvdrjwg D Raslfegt

Condition: good (used), Functionality: fully functional, Overall height: 245 cm, load capacity: 3,500 kg, fork length approx. 160 cm, dead weight: 4,415 kg, operating hours: 4,845 h, lifting height: 5,530 mm. Electrically adjustable forks, triplex mast, sideshift, Cgjbvdewdukfsrlfst

Year of construction: 2001, Condition: used, Functionality: fully functional, Industrie- & Anlagenbau - Bad Königshofen Continuous plant / Hardening furnace → Consisting of the process stages: Hardening, post-treatment and temperingYear of construction: 2001General: 2001-2023 production-accompanying exchange of wear ilability over the year 90Control system: S5Current plant technology: Pusher-type furnace (made of cast steel)Output during quenching and tempering max. 300 kg/h Output during carbonitriding max. 100 kg /hThe plant consists of the 7 main components: Continuous annealing furnace, quenching bath, oil storage tank, de-oiling and washing station; manipulator, continuous tempering furnace, control cabinet / ctionality of the continuous annealing line: - the plant is capable of quenching and tempering and carbonitriding on oil bath basis- process temperatures up to 930°C- Base or safety gas: (for O2 closure) nitrogen/methanol (as carbon donor) is used- process gas: natural gas or ammonia but convertible to propane- the curing area is heated with natural gas- the tempering furnace is powered by electricity- the round wire link belt has a width of 765mm (1.4864 Nb)1. continuous annealing furnace: - Model: DOBGS 7.5 1 50-10-0 (intermittently conveying, protective gas-tight outer shell, indirectly heated with recu - radiant tube burners.- Outer dimensions: Continuous furnace L x W x H = 7.85 x 2.10 x 2.25 m → annealing zone length 5.0 m; conveyor belt width: 765 mm.- Temperature: max. 980 °C +/- 5 K- Total heating power: 210 kW - by means of 14 Noxmat - steel tube burners manufacturer ALD with a radiant tube diameter of 150 mm.- temperature control zones: 3 heating and control zones (i.e. zone1 - 6 x 15 = 90 kW; zone2 - 4 x 15 = 60 kW; zone3 - 4 x 15 = 60 kW)- Protective gas supply / control: 3 x each nitrogen, methanol, natural gas, ammonia air- Throughput speed: adjustable via frequency converter 2 to 7 m/h- Furnace time: approx. 75 min at 4m/h; adjustable from 38 to 135 min; holding time 50 min at 4m /h- Transport equipment: Round wire link belt made of 1.4864 with 18 mm lamellar edge- Inert gas consumption: inert gas: nitrogen approx. 3 m3/h; methanol 3 l/h, natural gas 500-2000 l/h, ammonia 200-300 l/h, air 500 l/h- Lining: is lined with fireclay, ceiling with thermal insulation wool, condition: in need of repair- Electrical connected load approx. 10 kW - Total weight approx. 15.800 kg2. quenching bath model KAB 11,1: - suitable for quenching with oil- Structure: electrically driven circular conveyor, level difference detector, lifting platform, basket turning device, bath heating, bath circulation, water cooling and draining station.- External dimensions: L x W x H = 2.80 x 2.50 x 2.00 [m]; drop height in quenching oil = 1.0 [m]. - Total weight with oil: approx. 16,000 [kg].- Connected load heating: 48 kW- oil cooler HK4 - make Hering 2 x 2,2 kW- incl. level - difference detector model NDM 100-03. oil reservoir model B12,5: - Suitable for holding the oil from the quenching bath with pump and support frame for centrifuge system.- External dimensions: L x W x H = 4.20 x 2.50 x 1.55 m; max. filling height 1.40 m; max. volume 12.88 m34. de-oiling and washing station: - consisting of 1x centrifuge AZ 500 manufacturer WMV, 1 x washing machine WA 500, 1 x centrifuge AZ 500 H for drying. - 8 cylindrical transport containers according to drawing 300 /864 /96 - drum height 500mm- connected load: ca 15 kW5. manipulator model MBM 63/1 - (500): - consisting of a mechanical cross s Cgjbvdsp Ecn Ajrlfot

Condition: used, Year of construction: 2014, This Schechtl HT 310 press brake is being auctioned online in our industrial auction/machinery auction for Pieger Roof + Wall – roof tiles, gutters, bending machines, tools, roofing accessories, and heavy-duty shelving. Cjbvdewhc T Aerlfegt You can find these and many other items on our platform.

Condition: used, 1 x 3-axis CNC universal bed milling machine Lagun FBF 1200, manufactured by Lagun, type FBF 1200, year of manufacture 1991, serial no. A12054, control system by Lagun CNC, T-slot clamping table approx. 600 x 1,250 mm, travel distances approx. X: 1,100 mm, Y: 600 mm, Z: 600 mm, swiveling milling head Cgsbvdswg D N Asrlfot

Year of construction: 2011, Condition: good (used), Roller belt left: 400 cm, roller belt right: 600 cm. Cebvdrjwdui Iolfegt

Condition: used, Year of construction: 2006, This Biegemaster folding machine is being auctioned online in our industrial auction / machinery auction for Pieger Roof + Wall business liquidation – roof tiles, gutters, bending machines, tools, roofing accessories, and heavy-duty shelving. Cgobvswhc R Iodrlfst You can find these and many other items on our platform.

Condition: used, 1 extraction system, Kemper type 91, built approx. 2015, with piping Cgebvdrowg D Nislfet

Condition: good (used), Year of construction: 2007, 400 V, 26 kW, dead weight: 6,150 kg. Control system: Siemens Sinumerik, laser (make: Rofin, type: DC 020, control: Rofin). Chip/material conveyor (make: FB Automazione, serial number: 322-06-12, year of manufacture: 2007), filter system (make: Sideros, type: FL045L00A1, year of manufacture: 2006), hydraulic cooling system. Pipe storage: approx. 660 cm. Cgsbvdewduizsrlfjt

Condition: used, 1 x 3-axis CNC universal bed milling machine Lagun FBF 3250, Lagun type FBF 3250, control system Lagun CNC, T-slot clamping table approx. 700 x 3,250 mm, travel paths approx. X: 3,000 mm, Y: 940 mm, Z: 1,000 mm, swiveling milling head Cjbewg D I Eovdrlfogt

Condition: good (used), Year of construction: 1997, Dead weight: 8,000 kg, pressure: 125 t, bending length: 3,050 mm, stroke approx. 335 mm, CNC control DELEM, Cgobvdjwduiuerlfot

Condition: used, 1 x 3-axis CNC machining center Hurco type VMX 64, serial no. 0-7056, year of manufacture 01, T-slot clamping table approx. 600 x 1,600 mm, travels approx. X: 1,650 mm, Y: 850 mm, Z: 760 mm, control system Hurco, type Ultimax, 2 hydraulic clamping vices, 1 magnetic clamping plate Cjbvdrlewg D Hnjfjgt

Condition: used, 1 center lathe, ZMM Sliven type CU 630, center width approx. 3,000 mm, center height approx. 400 mm, 2-axis digital display from Anilam Wizard Cgobswg D Eqjvdrlfet

Condition: used, 1 x 3-axis CNC machining center Hurco VMX 42, Hurco type VMX 42, serial no. M442-06201072CFA, T-slot clamping table approx. 600 x 1,300 mm, travel X: 1,060 mm, Y: 610 mm, Z: 610 mm, control system Hurco, type Ultimax, with chip conveyor Csbewg D Edjvdrlfjgt

Condition: used, Year of construction: 2004, Soraluce type SP 10000, Heidenhain TNC 426 CNC control, serial no. 8701, year of manufacture 2004, travels approx. X: 8,500 mm, Y: 2,000 mm, Z: 1,200 mm, table size approx. 10,000 x 1,100 mm, total weight approx. 31,500 kg, automatic indexing milling head, 2-stage ZF gearbox, 60-station tool changer, horizontal and vertical tool change, 2 coolant systems, frequency-controlled high-pressure pump, chip conveyor, operator platform, etc. - ATTENTION: Difficult pickup conditions (crane required) Cgjbvdowg D Dterlfjt Prior consultation or attendance at the viewing appointment is therefore strongly recommended.

Condition: used, Year of construction: 2008, Soraluce type FL-8000, year of manufacture 2008, serial no. 7854, Heidenhain CNC control, travels approx. X: 7,500 mm, Y: 1,400 mm, Z: 1,000 mm, table size approx. 8,000 x 2,000 mm, total weight approx. 18,300 kg, 40-station tool changer, max. tool weight 20 kg, automatic indexing milling head, cooling lubricant system 2 with internal cooling lubricant supply, tank volume 500 l + 250 l lifting tank and pump, variable frequency-controlled high-pressure pump, mobile operator platform, chip conveyor, work table field 9,000 x 2,000 x 300 mm, radio measuring touch system M&H 20.41, measuring station TT 140, etc. Cgjbvdjwg D Daerlfst