Second-hand machinery for sale (2,404)

Condition: used, Year of construction: 2008, operating hours: 13,000 h, Functionality: fully functional, Pfeiffer Vacuum GmbH Turbomolecular pump with electronic drive unit, ProfibusDP gateway and accessories, PM P03 020 GA, TPH 2101 P + TIC 250 Model Turbomolecular Pump: PMP03020G, TPH2101P Model Gateway: TIC250 Dsln Ucdjncd S Ueqecg Turbo molecular pump: Serial number: 14219214 YoM: 2008 Nominal connection size inlet: DN 250 ISO-K Nominal connection size outlet: DN 40 ISO-KF Flood connection: G1/8" Rated speed: 31.500/min (525Hz) Pumping speed N2: 1.900l/s Max. Prevacuum pressure N2: 1,5mbar Max. Prevacuum pressure He: 1,0mbar Max. Prevacuum pressure H2: 0,5mbar Oil: PM 016 144-T Note on condition: 1. statements on the operation hour time is about 13,000h with about 1,600 start-up and shut-down. 2. process gases: nitrogen and argon 3. process dusts: chromium nitrite and steel 100Cr6 4. the pump was stored fully functional in 2018 and externally cleaned.

Condition: used, 1 guillotine shear, Schechtl type MSB 300/NC, year 1982, serial no. 7119, max. sheet thickness 2.5 mm, working width approx. 2,500 mm Djljwg D Rgsn Ucdqjcg

Condition: used, Max. load capacity: 6300 kg, span: approx. 20,000 mm, with electric trolley, bottle hook and floor control Djln Ucjwact Tedqjcg

Year of construction: 2001, Condition: used, Functionality: fully functional, Industrie- & Anlagenbau - Bad Königshofen Continuous plant / Hardening furnace → Consisting of the process stages: Hardening, post-treatment and temperingYear of construction: 2001General: 2001-2023 production-accompanying exchange of wear ilability over the year 90Control system: S5Current plant technology: Pusher-type furnace (made of cast steel)Output during quenching and tempering max. 300 kg/h Output during carbonitriding max. 100 kg /hThe plant consists of the 7 main components: Continuous annealing furnace, quenching bath, oil storage tank, de-oiling and washing station; manipulator, continuous tempering furnace, control cabinet / ctionality of the continuous annealing line: - the plant is capable of quenching and tempering and carbonitriding on oil bath basis- process temperatures up to 930°C- Base or safety gas: (for O2 closure) nitrogen/methanol (as carbon donor) is used- process gas: natural gas or ammonia but convertible to propane- the curing area is heated with natural gas- the tempering furnace is powered by electricity- the round wire link belt has a width of 765mm (1.4864 Nb)1. continuous annealing furnace: - Model: DOBGS 7.5 1 50-10-0 (intermittently conveying, protective gas-tight outer shell, indirectly heated with recu - radiant tube burners.- Outer dimensions: Continuous furnace L x W x H = 7.85 x 2.10 x 2.25 m → annealing zone length 5.0 m; conveyor belt width: 765 mm.- Temperature: max. 980 °C +/- 5 K- Total heating power: 210 kW - by means of 14 Noxmat - steel tube burners manufacturer ALD with a radiant tube diameter of 150 mm.- temperature control zones: 3 heating and control zones (i.e. zone1 - 6 x 15 = 90 kW; zone2 - 4 x 15 = 60 kW; zone3 - 4 x 15 = 60 kW)- Protective gas supply / control: 3 x each nitrogen, methanol, natural gas, ammonia air- Throughput speed: adjustable via frequency converter 2 to 7 m/h- Furnace time: approx. 75 min at 4m/h; adjustable from 38 to 135 min; holding time 50 min at 4m /h- Transport equipment: Round wire link belt made of 1.4864 with 18 mm lamellar edge- Inert gas consumption: inert gas: nitrogen approx. 3 m3/h; methanol 3 l/h, natural gas 500-2000 l/h, ammonia 200-300 l/h, air 500 l/h- Lining: is lined with fireclay, ceiling with thermal insulation wool, condition: in need of repair- Electrical connected load approx. 10 kW - Total weight approx. 15.800 kg2. quenching bath model KAB 11,1: - suitable for quenching with oil- Structure: electrically driven circular conveyor, level difference detector, lifting platform, basket turning device, bath heating, bath circulation, water cooling and draining station.- External dimensions: L x W x H = 2.80 x 2.50 x 2.00 [m]; drop height in quenching oil = 1.0 [m]. - Total weight with oil: approx. 16,000 [kg].- Connected load heating: 48 kW- oil cooler HK4 - make Hering 2 x 2,2 kW- incl. level - difference detector model NDM 100-03. oil reservoir model B12,5: - Suitable for holding the oil from the quenching bath with pump and support frame for centrifuge system.- External dimensions: L x W x H = 4.20 x 2.50 x 1.55 m; max. filling height 1.40 m; max. volume 12.88 m34. de-oiling and washing station: - consisting of 1x centrifuge AZ 500 manufacturer WMV, 1 x washing machine WA 500, 1 x centrifuge AZ 500 H for drying. - 8 cylindrical transport containers according to drawing 300 /864 /96 - drum height 500mm- connected load: ca 15 kW5. manipulator model MBM 63/1 - (500): - consisting of a mechanical cross s Doln Uop Ecn Aocdqscg

Condition: used, 1 x 3-axis CNC universal bed milling machine Lagun FBF 1200, manufactured by Lagun, type FBF 1200, year of manufacture 1991, serial no. A12056, control system by Lagun CNC, T-slot clamping table approx. 600 x 1,250 mm, travel distances approx. X: 1,100 mm, Y: 600 mm, Z: 600 mm, swiveling milling head Dcelnewg D Rae Ucdqjg

Year of construction: 1999, Condition: used, machine/vehicle number: 19084, Weight: approx. 3500 kg, max. load capacity: 750 kg, with vacuum beam, span: approx. 20,000 mm, with 15 two-sided storage racks, mostly made by HEGLA, built approx. 1990 - 1995, load capacity: 10 kg per side, mobile shelving, metal, painted, green, with 12 units and electric drive, rail-guided, with stationary loading, built in 2006 Dcjlnowacr Ae Ucdqjg

Condition: used, 1 x 3-axis CNC universal bed milling machine Lagun FBF 1200, manufactured by Lagun, type FBF 1200, year of manufacture 1991, serial no. A12054, control system by Lagun CNC, T-slot clamping table approx. 600 x 1,250 mm, travel distances approx. X: 1,100 mm, Y: 600 mm, Z: 600 mm, swiveling milling head Dceln Ucdewg D N Aoqjg

Condition: used, Year of construction: 2018, machine/vehicle number: GG810S23284, Dead weight: 4340 kg Dcjln Ucdewacr Neqjg

Condition: used, 1 extraction system, Kemper type 91, built approx. 2015, with piping Dcoln Uewg D Nijcdqsg

Condition: used, Consisting of: Air compressor, make BOGE, type: SLF51, year of manufacture 2012, serial no. 5058502, Air compressor, make BOGE, type: SLF75-3, year of manufacture 2015, serial no. 5082768, Air compressor, make BOGE, type: VLEX65, year of manufacture 2012, Compressed air dryer, type: DS120, year of manufacture 2020, Compressed air dryer, make MTA, type: DRY ENERGY, Oil separator, Compressed air storage tank, make LOHENNER, year of manufacture 1991, Capacity: 1500 l, Central control unit, make AIRLEADER and candle filter system Dcelnjwactmj Ucdqjg

Condition: used, 1 x 3-axis CNC universal bed milling machine Lagun FBF 3250, Lagun type FBF 3250, control system Lagun CNC, T-slot clamping table approx. 700 x 3,250 mm, travel paths approx. X: 3,000 mm, Y: 940 mm, Z: 1,000 mm, swiveling milling head Doln Ucowg D I Esdqocg

Condition: used, Year of construction: 2012, machine/vehicle number: E4481040, Table size: approx. 3000x6000 mm, with cutting bridge and control panel Dcsln Ucewacttodqjg

Condition: used, 1 x 3-axis CNC machining center Hurco type VMX 64, serial no. 0-7056, year of manufacture 01, T-slot clamping table approx. 600 x 1,600 mm, travels approx. X: 1,650 mm, Y: 850 mm, Z: 760 mm, control system Hurco, type Ultimax, 2 hydraulic clamping vices, 1 magnetic clamping plate Dslnowg D Hns Ucdqscg

Year of construction: 1996, Condition: used, machine/vehicle number: .251.0359, Size: approx. 2700x5000 mm, max. glass thickness: 30 mm, with thickness measurement and drying zone Dcjln Uswacudscdqjg

Condition: used, 1 center lathe, ZMM Sliven type CU 630, center width approx. 3,000 mm, center height approx. 400 mm, 2-axis digital display from Anilam Wizard Dcoljwg D Eqjn Ucdqeg

Year of construction: 2023, Condition: used, Consisting of: Cleanroom access with 1-door, glazed, with SIEMENS control system and touch panel, as well as enclosure, integrated ceiling crane system, on 2 travel rails, mounted on vertical struts, bolted, with electric chain hoist, ABUS, and manipulator, HEGLA, type: VHG-500H, built in 2023, load capacity: 500 kg, extraction, temperature control, and vacuum traverse, HEGLA, built in 2023, max. load capacity: 250 kg Dcoln Uewacriecdqjg

Condition: used, 1 x 3-axis CNC machining center Hurco VMX 42, Hurco type VMX 42, serial no. M442-06201072CFA, T-slot clamping table approx. 600 x 1,300 mm, travel X: 1,060 mm, Y: 610 mm, Z: 610 mm, control system Hurco, type Ultimax, with chip conveyor Doln Ucswg D Ededqocg

Condition: used, Year of construction: 2000, machine/vehicle number: 2083, Base area: approx. 3000x6000 mm, with cutting bridge, with 2 cutting heads, transfer crushing table, table size: approx. 3000x8000 mm, tilting table for manual loading Dolnewactyj Ucdqscg

Condition: used, Year of construction: 2004, Soraluce type SP 10000, Heidenhain TNC 426 CNC control, serial no. 8701, year of manufacture 2004, travels approx. X: 8,500 mm, Y: 2,000 mm, Z: 1,200 mm, table size approx. 10,000 x 1,100 mm, total weight approx. 31,500 kg, automatic indexing milling head, 2-stage ZF gearbox, 60-station tool changer, horizontal and vertical tool change, 2 coolant systems, frequency-controlled high-pressure pump, chip conveyor, operator platform, etc. Dcsln Ucdowg D Dteqjg - ATTENTION: Difficult pickup conditions (crane required) Prior consultation or attendance at the viewing appointment is therefore strongly recommended.

Condition: used, for laminated and float glass, manufacturer HEGLA, type: PROLAM46, year of manufacture 2010, serial no. 2252, net weight: 6100 kg, working area: approx. 4600 x 4500 mm, with second table half, size: approx. 3000 x 8000 mm, with extension, cutting bridge with 2 cutting heads, control unit with monitor, additional cutting bridge with cutting head Dslswacq Son Ucdqjcg

Condition: used, Year of construction: 2008, Soraluce type FL-8000, year of manufacture 2008, serial no. 7854, Heidenhain CNC control, travels approx. X: 7,500 mm, Y: 1,400 mm, Z: 1,000 mm, table size approx. 8,000 x 2,000 mm, total weight approx. 18,300 kg, 40-station tool changer, max. tool weight 20 kg, automatic indexing milling head, cooling lubricant system 2 with internal cooling lubricant supply, tank volume 500 l + 250 l lifting tank and pump, variable frequency-controlled high-pressure pump, mobile operator platform, chip conveyor, work table field 9,000 x 2,000 x 300 mm, radio measuring touch system M&H 20.41, measuring station TT 140, etc. Djln Uswg D Daocdqecg

Condition: used, Year of construction: 2015, machine/vehicle number: 100000610, Power: 60 kW, with separate control cabinet, control unit, machine weight: approx. 6000 kg Dcjln Ucjwacrcodqog

Condition: used, Year of construction: 2021, machine/vehicle number: 100004857, Power: 13.4 kW, with tool magazine with 18 tool positions and control panel as well as 12 suction cups and 15 tool holders, partially equipped with tools Dcoln Ucdowacrpsqjg

Condition: used, radmobil, approx. 100 pcs., length: 1200 to 1400 mm each, various sizes and colors Dsln Ucjwacuqjdqecg

Condition: used, Year of construction: 2003, machine/vehicle number: 30-1712, Power: 165 kW, consisting of: material feed, ball roller table, vacuum traverse, gantry crane system, grinding unit, turning table, grinding unit, material discharge, gantry drilling unit, type: 2400T, glass washing machine, control unit with control system, made by SIEMENS, separate control cabinet system, made by RITTAL, monitoring monitor and water treatment system, built in 2015. NOTE: Maintenance required. Dolswacrven Ucdqocg