Second-hand machinery for sale (2,359)

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 181756, travel distance X-axis: 560 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 600 mm, controller model: Mazatrol 640M, number of slots in tool magazine: 40, Machine is delivered EXW - free on truck. TECHNICAL DETAILS X-axis travel: 560 mm Dobjwgdnxju Tic Aout Y-axis travel: 630 mm Z-axis travel: 600 mm Distance from pallet to spindle center: 80 – 710 mm Distance from pallet center to spindle nose: 70 – 670 mm Table Pallet size: 400 mm x 400 mm Pallet load (uniform): 400 kg Pallet surface: M16 × P2 Indexing time: 1.3 s / 90° Feed Rapid traverse: 60,000 mm/min Feed rate: 1 – 60,000 mm/min Tool changer Tool holder: CAT No. 40 Tool magazine capacity: 40 tools Max. tool diameter / length / weight: 95 mm / 360 mm / 12 kg Tool diameter with free adjacent tool position: 150 mm Tool change time (chip-to-chip): 2.2 s Change method: random/shortest path Pallet change time: 5 s Number of pallets: 2 Coolant Coolant pump: 0.75 kW Coolant tank volume: 500 l MACHINE DETAILS Footprint (L × W): 2,435 × 4,244 mm Machine height: 2,794 mm Machine weight: 11,400 kg Connected load: 66 kVA EQUIPMENT - Rotating pallet changer (5 sec. pallet change time) - 2 pallets - Chip conveyor - Manuals High-speed spindle (under test) Speed range: 35 – 15,000 rpm Spindle gearbox: 1 Motor power (15 min. / continuous): 30 kW / 22 kW Tool holder: 7/24 taper No. 40 High-torque spindle (tested) Speed range: 35 – 12,000 rpm Spindle gear: 1 Motor power (15 min. / continuous): 22 kW / 15 kW Tool holder: 7/24 taper No. 40

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, grinding width: 1,350 mm, TECHNICAL DETAILS Grinding width: max. 1,350 mm Belt change side: left Grinding units Number of sanding units: 3 (1x cross belt, 2x sanding pads) Sanding pad segment width: electronic / 25 mm Unit power ratings Cross belt power: 15 kW Combination unit power: 12.5/15 kW Djbswfhgvou Tic Aout Shoe unit power: 15 kW EQUIPMENT - Vacuum table - Sanding belt blow-off device - Linked pressure bar - Cleaning brush - Bütfering application control

Condition: ready for operation (used), Year of construction: 2007, operating hours: 30,692 h, Functionality: fully functional, machine/vehicle number: L2202520, turning length: 305 mm, turning diameter: 320 mm, bar diameter: 51 mm, TECHNICAL DETAILS Working area Max. cutting diameter: 320 mm Max. turning stroke: 510 mm Max. turned length: 305 mm Bar capacity: 51 mm Drive Motor power: 11 kW Control system Control system: Fanuc i-Series Debu Ticjwgltco Asut Turret Number of tool positions: 12 MACHINE DETAILS Machine weight: 3,500 kg Rated power: 23.68 kVA

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 231-26, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table width: 950 mm, table length: 1,200 mm, rotational speed (max.): 10,000 rpm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Siemens Sinumerik 840 D X-axis travel: 400 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Spindle Spindle speed per spindle: 10,000 rpm Tool holder: HSK 63 Tool changer per spindle: 10-station Table Clamping area: 1,200 × 950 mm MACHINE DETAILS Dimensions: 5.0 x 4.0 x 2.8 m Dusbu Tijwd Sd Nsc Ajt Weight: 8.5 t Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 63 A Connected load: 41 kVA EQUIPMENT - Coolant system from KNOLL - Chip conveyor from KNOLL - Machine vises not included. Transportation on a standard truck is possible.

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, sheet thickness (max.): 6 mm, cutting length (max.): 220 mm, cutting force: 250 t, No reserve price - guaranteed sale to the highest bidder! Djbuewf It Ao Tic Aout TECHNICAL DETAILS Sheet thickness: 6 mm Pressure: 250 t Blade length: 220 mm Stroke length: 24 - 26 mm Ram stroke: max. 32 mm MACHINE DETAILS Machine weight: 1,600 kg

Condition: excellent (used), Year of construction: 2018, operating hours: 25,200 h, Functionality: fully functional, machine/vehicle number: 530021, No reserve price - guaranteed sale at the highest bid! Dobjwhllzeu Tic Aout TECHNICAL DETAILS Maximum build volume: 490 × 390 × 200 mm Maximum number of materials per part: 82 Support material: SUP705 / SUP706 (soluble) Horizontal layer thickness: 16 μm Resolution and accuracy X-axis resolution: 600 dpi Y-axis resolution: 600 dpi Z-axis resolution: 1,600 dpi Resolutions by print mode Digital materials: 30 μm High quality: 16 μm High speed: 30 μm Software and compatibility Software: Objet Studio™, compatible with GrabCAD Print Workstation compatibility: Windows 7 / Windows 8 MACHINE DETAILS Device dimensions: 1,400 × 1,260 × 1,100 mm Device weight: 430 kg Material cabinet size: 330 × 1,170 × 640 mm Material cabinet weight: 76 kg Operating environment and power supply Temperature range: 18 to 25 °C Humidity: 30–70% (non-condensing) Power requirement: 110 to 240 VAC, 50/60 Hz, 1.5 kW, single-phase EQUIPMENT - LAN network connection TCP/IP - CE/FCC approval Machine has been regularly serviced by the manufacturer

Condition: reconditioned (used), Year of construction: 1995, operating hours: 64,000 h, Functionality: fully functional, power: 551 kW (749.15 HP), No reserve price - guaranteed sale to the highest bidder! Engine was rebuilt in 2017. TECHNICAL DETAILS Engine power: 551 kW Concrete garage / container dimensions (L x W x H): 9,000 x 3,000 x 4,000 mm MACHINE DETAILS Operating hours: approx. 64,000 h Engine overhaul: carried out in 2017 at 48,500 h Turbocharger overhaul: carried out at 60,000 h Dusbuswgc A Io Tic Aot EQUIPMENT - Concrete garage with silencer - Additional oil cooler

Year of construction: 2020, Condition: like new (used), Functionality: fully functional, TECHNICAL DETAILS Measuring distance: 1 m (system on a 0.8 m table, microphone at a height of 1.6 m) Control: Touchscreen Dsbu Tewh Rx Hjic Aeut Flow and injection Max. flow rate: 350 mL/min Max. injection range: up to 100 g Speed and acceleration Loading speed (setpoint): 500 rpm Loading acceleration: 28 g Elution speed (setpoint): 1,200 rpm Elution acceleration: 163 g Speed range: 100 – 2,000 rpm Acceleration range: 1 – 452 g MACHINE DETAILS Dimensions (W x D x H): 570 x 520 x 460 mm Weight: 115 kg EQUIPMENT In addition to the CPC 1000 PRO, the system includes: - PLC 2500 UV-1 - QUAT GRAD, 3/16 (PLCA 2500) - AUTO INJ VLV W/TBNG KIT PLCA 2250/2500 - Sample loop, 50 ml PLCA, 1/8" - External injection pump (50-300 mL/MIN) - DAD-4WL, 190-840 NM, PLCA - Rack funnel, 16 outlets, PLCA - AUTO BKFLSH VLV W/TBNG KIT PLCA 2250/250

Condition: used, Year of construction: 2006, Deckel Maho DMC-635V Vertical Machining Centre with Heidenhain iTNC 530 Control, Table Size 785 x 555mm, 20 Tool ATC, ACAT40 Spindle Taper, Spindle Speed Max 8000 U/min, Renishaw NC4 Tool Setting System with Renishaw TRS1 Eye, Manual. S/No. 1540501589A (2006) Location: This lot is located in Birmingham, UK. All/Any tooling is being offered as specifically described. Duobuowhwi Sj Tic Ajt

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, machine/vehicle number: V4AY3601, feed length X-axis: 200 mm, feed length Z-axis: 400 mm, controller model: Sinumerik 828 D, Equipment: chip conveyor, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Control: Siemens Sinumerik 828 D Z-axis travel: approx. 400 mm X-axis travel: approx. 200 mm MACHINE DETAILS Dimensions: 4,000 x 2,400 x 2,300 mm Weight: 5 t Operating voltage: 3 × 400 V Frequency: 50–60 Hz Rated current: 46 A EQUIPMENT Duebu Ticewd R R Is Aet - C-axis included - Chip conveyor included - Conveyor and loading system from EWAB

Condition: ready for operation (used), Year of construction: 2013, operating hours: 10,088 h, Functionality: fully functional, working width: 900 mm, workpiece height (max.): 100 mm, grinding belt length: 1,900 mm, grinding belt width: 930 mm, Deburring machine with 3 units and wet separator TECHNICAL DETAILS Working width: 900 mm Workpiece height: 100 mm Grinding belt and feed Grinding belt dimensions: 930 × 1,900 mm Feed speed: 2.5 – 14 m/min Unit speeds 1st unit, 2-speeds: 11 and 22 m/s 2nd unit, 2-speeds: 11 and 22 m/s 3rd unit: 18 m/s MACHINE DETAILS Dimensions (L × W × H): 2,300 × 1,500 × 2,300 mm Machine weight: 3,000 kg Operating hours: 10,088 h Duobswf Iqhsu Tic Ast EQUIPMENT - W sanding belt unit - B brush unit for finishing sanding and light edge rounding - Roller unit (W) - Integrated extraction system W 2000 series wet scrubber with 3.0 kW power available; year of manufacture: 2021 Special sludge container available ATEX Zone 2

Year of construction: 2022, Condition: used, Turbochef Eco Catering Oven, Cook Chamber Sizes 180 x 318 x 267mm, Cook Chamber Volume 15.3 Litre, Smart Menu System on Touch Screen Control, USB Data input Socket. S/No. ECOUKD00928 (2022) Location: This lot is located in Birmingham, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Dusbu Tiowhwg Dec Aot

Condition: good (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: R6CQ2401, turning diameter over cross slide: 360 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Siemens Sinumerik 840 D X-axis travel: 210 mm Z-axis travel: 610 mm Z-axis in rotary axis – resolution: 0.001° Spindle Spindle size: 65 mm diameter Outer spindle diameter of front bearing: 100 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 360 mm Distances and workpiece sizes Distance between main spindle and tailstock: 805 mm Distance between main spindle and counter spindle: 716 mm Max. workpiece size with tailstock: 200 × 520 mm diameter Counter spindle / tailstock Internal taper of counter spindle/tailstock: MK4 Tailstock travel: 500 mm Max. clamping force: 8,000 Nm Duobu Ticowd R Nwo Ajt Feed and Rapid traverse Feed force X/Z-axis: 5,000–7,000 Nm Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 24 m/min Rapid traverse: 100 rpm Tool carrier Tool turret: 12-station Tool holder: VDI 30 Driven stations: 12 Speed range of driven tools: 0–4,000 rpm MACHINE DETAILS Dimensions: 4.0 x 2.5 x 2.5 m Weight: 6 t Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 29 A EQUIPMENT - SCHUNK three-jaw chuck with 220 mm diameter - Tailstock included - Machine can be transported on a standard truck

Condition: ready for operation (used), Year of construction: 1995, Functionality: fully functional, back gauge: 1,000 mm, sheet thickness (max.): 6 mm, cutting length (max.): 3,050 mm, cutting angle (max.): 2 °, TECHNICAL DETAILS Sheet width: 3,050 mm Sheet thickness: 6 mm Cutting angle: 2°30' - 0°30' Backgauge: 1,000 mm Power and hydraulics Strokes per minute: 11–24 Dujbu Tijwf Imijc Aot Oil capacity: 155 l MACHINE DETAILS Overall length: 3,700 mm Overall width: 2,500 mm Overall height: 1,900 mm Machine weight: 6,500 kg EQUIPMENT - Angle stop included - 3 front support arms included - Foot switch included

Condition: used, Perfect Fry PFA 720/1 Electric Fully Automatic Ventless Fryer, Capacity 11 Litre, Oil Drain Tap, Fire Suppression System (Integral), Can Cook Up to 1.3kg Per Cycle, Self Venting, Replacable Hepa-Style Air Filtration. S/No. 021622PK Duebuowhwdis Tic Aot Location: This lot is located in Birmingham, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 300-01, spindle speed (max.): 12,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 425 mm, number of slots in tool magazine: 108, swivel angle B-axis (max.): 101 °, TECHNICAL DETAILS Control system: Siemens Sinumerik 840 D X-axis travel: 550 mm Y-axis travel: 320 mm Z-axis travel: 425 mm B1 swivel axis: 101° BT axis: 0 – 180° V-axis within work area: -40 to -496 mm V-axis outside work area: up to 570 mm Z-axis (rotary axis): approx. 450 mm Spindle data Main spindle speed: 12,000 rpm Turning spindle: 4,000 rpm C-axis: 6,500 rpm A-axis: 4,500 rpm Driven tool speed: 4,500 rpm Tool holder Main spindle tool holder: HSKA 63 Turret tool holder: Capto 4 Tool holder diameter: 63 mm Tool magazine Tool turret: 12-station with driven tools Tool changer: 32-station Additional magazine: 64-station MACHINE DETAILS Operating voltage: 400 V Frequency: 50 – 60 Hz Rated current: 125 A Connected load: 70 kVA Dimensions and weight Installation dimensions (L x W x H): 8,565 x 5,150 x 2,750 mm Total weight: 18,000 kg EQUIPMENT - Coolant system - Breuning Simag bar loader, built in 2014 - Tool measuring system - Internal cooling system with 70 bar internal cooling - Driven safety door Dujbuswd R Exj Tic Aot - Technical documentation - Manual - Continuously adjustable speed - Transport on a standard truck possible

Condition: ready for operation (used), Year of construction: 1996, operating hours: 92,992 h, Functionality: fully functional, pressing force: 160 t, stroke distance: 400 mm, controller model: Cybelec VisiTouch 19, surfacing fence length: 3,550 mm, Complete overhaul in 2024 Duobujwfhm Ao Tic Aet TECHNICAL DETAILS Pressure: 160 t Bending length: 3550 mm Stroke: 400 mm Control: Cybelec VisiTouch 19 MACHINE DETAILS Weight: 15,400 kg Dimensions: 4,600 x 2,600 x 3,200 mm EQUIPMENT - Backgauge X, R, Z1, Z2, X1 - 2 front bending aids - Fiessler AKAS safety light barrier - Motorized CNC crowning - Pneumatic die shifting - 2 front table supports - Hydraulic punch clamping - Hydraulic die clamping

Condition: used, Year of construction: 2023, OAV Max 330 Edgebander. S/No. 23040002EB3N3 (2023). Country of Origin: Taiwan Dobu Ticewhnkyo Aeut Please Note: This lot is located in Birmingham, UK. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2004, operating hours: 5,012 h, Functionality: limited functionality, machine/vehicle number: 15115221654, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, spindle speed (max.): 6,300 rpm, number of slots in tool magazine: 100, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 90 °, swivel angle C-axis (max.): 360 °, Note: Minor relay error. TECHNICAL DETAILS X-axis travel: 2,200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Rapid traverse X-axis rapid traverse: 100 m/min Y-axis rapid traverse: 50 m/min Z-axis rapid traverse: 50 m/min Djbswd N D Tou Tic Aout Feed rate X-axis feed rate: 20 m/min Y-axis feed rate: 20 m/min Z-axis feed rate: 20 m/min Table Table length: 2,600 mm Table width: 560 mm T-slots: 6 x 18H7 Table load: 2,200 kg Spindle Spindle speed: 20 - 6,300 rpm Spindle torque: 350 Nm Spindle power: 14,000 W Tool holder: 40 mm (SK 40 DIN69871 A) Max. tool weight: 6,000 g Tool magazine Number of magazine positions: 100 Rotary and swivel axes Rotary table diameter (C-axis): 500 mm Max. rotation speed (C-axis): 10 rpm Rotation range (C-axis): 360° (hydraulically clamped) Swivel range of swivel spindle (B-axis): +90° to -90° Tilt-action of swivel spindle (B-axis): 2.5° Accuracy Position tolerance (X, Y, Z): 0.010 mm Resolution: 0.001 mm Control system Control system manufacturer: SIEMENS Control system model: Sinumerik 840D MACHINE DETAILS Spindle hours: 5,012 h On-time: 17,969 h Connected load: 60 kVA Total length: 6,800 mm Total width: 3,900 mm Total height: 2,750 mm Total weight: 16,000 kg Transport dimensions: 2.78 x 4.47 x 2.56 m Transport weight: 14 t EQUIPMENT - Chip conveyor - Continuously adjustable speed - Technical documentation and manual - Hydraulically clamped rotary axis - Tilting spindle with 2.5° indexing

Condition: used, Year of construction: 2012, XYZ SLX425X 1,250 CNC Lathe. S/No. L522 (2012) with Prototrak SLX Control. Country of Origin: United Kingdom Duebuswhn Swj Tic Aet Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: AH0366, turning diameter: 310 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 740 mm, bar diameter: 65 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 230 mm Z-axis travel: 740 mm Turning range Swing diameter over bed: 425 mm Max. turning diameter: 310 mm Center distance: approx. 600 mm Spindle Spindle speed: max. 4,500 rpm Spindle bore: 65 mm Spindle head diameter: 100 mm Max. chuck diameter: 250 mm Max. permissible chuck jaw weight: 1.25 kg Spindle bearing diameter: 120 mm Debujwd Nyzo Tic Ajut Rapid traverse Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 24 m/min Tool carrier Turret stations: 6 Tool holder: DIN 69880 / 30 mm Speed of rotating tools: max. 6,000 rpm MACHINE DETAILS Overall length: 5,000 mm Overall width: 1,500 mm Overall height: 1,800 mm Total weight: 4,700 kg EQUIPMENT - LNS Quickload Servo V3 bar loader, built in 2007 - Technical documentation available - VDI 30 tool holders and machine tools shown are not included in delivery - Machine without tailstock

Condition: used, Year of construction: 2007, Haas TL-2CE CNC Lathe. S/No. 3080208 (2007) with Haas CNC Control, 300mm 3 Jaw Chuck, Tailstock. Country of Origin: U.S.A Duobu Ticswhn Rye Aot Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: S10-1622378FKBCH, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 20, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 660 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table Table length: 762 mm Table width: 406 mm Table load: 682 kg Table clamping area (L × W): 762 × 406 mm T-slots (DIN 650): 3 × 18 H8 × 100 mm Distance spindle nose to table: 102 – 610 mm Spindle Debu Tjwd Nwyoic Asut Max. spindle speed: 12,000 rpm Spindle power: max. 11 kW Spindle torque: max. 61 Nm Tool holder: 40 mm Speed control: infinitely variable Feed and rapid traverse Rapid traverse X-axis: 24 m/min Rapid traverse Y-axis: 24 m/min Rapid traverse Z-axis: 24 m/min Tool magazine Magazine positions: 20 Tool holders (SK40): not included Tool diameter: 89 mm Tool length: 250 mm Tool weight: 7 kg Accuracy Positioning accuracy (Pmax.): 0.01 mm Repeat accuracy (Ps): 0.005 mm Control system Control system manufacturer: HURCO MACHINE DETAILS Connected load: 15 kVA Operating voltage: 400 V, 50 Hz Weight: 2.85 t Footprint without internal cooling: 3.4 x 3.2 m Machine dimensions: 2.1 x 1.8 x 2.6 m Transport dimensions: 1.96 x 2.3 x 2.39 m EQUIPMENT - Continuously variable speed Adjustable - Digital technical documentation can be accessed via the control system - Without mounted machine vices and the tool holder and tool mounted in the spindle

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 2685, workpiece length (max.): 300 mm, workpiece diameter (max.): 15 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. diameter to be processed: 15 mm Min. diameter: depends on the part Max. part length: approx. 300 mm Min. part length: depends on the part MACHINE DETAILS Control voltage: 24 V Connection voltage: 400 V, 50 Hz Dimensions and weight Total weight: 2,500 kg Total length: 5,000 mm Total width: 3,000 mm Total height: 2,100 mm EQUIPMENT - Hydraulic feed - Gear saw unit - Rotary indexing table with 20 positions - Bar feeder - Technical documentation Dusbu Tswd Nlweic Aot - Manual

Condition: refurbished (used), Year of construction: 2017, operating hours: 428 h, Functionality: fully functional, machine/vehicle number: 428, drilling depth: 400 mm, spindle speed (max.): 23,700 rpm, drill diameter: 6 mm, number of spindles: 1, workpiece length (max.): 450 mm, No reserve price - guaranteed sale to the highest bidder! Machine has only 428 operating hours! TECHNICAL DETAILS Control: SFT TBS 200 Drilling method: Single-lip drilling Number of spindles: 1 Drilling diameter in steel: 1 – 6 mm Drilling depth with plunge spindle: 120 mm Drilling depth with sealed housing only: 400 mm Sealed housing with one-piece steady rest: 350 mm Max. workpiece length: 450 mm Max. rapid traverse: 4,000 mm/min Spindle drive Power at 2,810 rpm: 2 kW Power at 7,880 rpm: 3.5 kW Power at 23,700 rpm: 1.5 kW Frequency range: 100 – 800 Hz Tailstock Debjwd Ni Aeu Tic Ajut Motor power: 0.75 kW Spindle speed: 500 rpm Max. clamping stroke: 60 mm Pre-slide drive Type: Ball screw spindle 25 × 5 mm with servo motor Drill bushing holder and chip ejector Drill bushing holder: permanently mounted on the machine bed Components: BOTEK drill bushing holder and sealing housing Chip ejection: downwards into the chip container MACHINE DETAILS Dimensions: 2.7 x 3.05 x 1.7 m Weight: 2.5 t Operating hours: 248 h Operating voltage: 400 V Frequency: 50 Hz Connected load: 14 kW Coolant system Tank volume: approx. 500 l Filtration: integrated paper belt filter Coolant pump: single-piece with frequency converter Flow rate: approx. 5 – 12 l/min Max. coolant pressure: 160 bar EQUIPMENT - Hydraulically adjustable tailstock - Manual tailstock adjustment for different tool positions Workpiece lengths - Drill bushing holders and sealing housings from BOTEK - Chip ejection directly into a collection container - Integrated coolant system with paper belt filter - Includes deep-hole drill bit and technical documentation Transportation possible by standard truck