Second-hand machinery for sale (2,394)

Year of construction: 2003, Condition: good (used), Functionality: fully functional, screw diameter: 27 mm, TECHNICAL DETAILS Capacity: 10 – 40 kg/h Screw and Barrel Technology Design: Synchronous Cjlqsv U Da Sj Unblsrb Screw center distance: 23 mm Screw diameter: 2 × Ø27.0 mm Kneading disc and kneading block diameter: 27.0 mm Screw material: 1.2379 Cylinder diameter: 27.2 H8 Cylinder material: 1.8550 nitrided, nitriding layer 0.5–0.6 mm Screw length: 40 D Screw torque: 2 × 100 Nm Screw speed: max. 500 rpm Drive Drive type: DC shunt motor Drive power: 10.5 kW Motor speed: max. 2,690 rpm Gear ratio: i = 5.38 Power transmission: Clutch Heating and cooling system Number of heating zones: 11 Heating capacity: 9.85 kW Number of cooling zones: 9 Cooling type: ZIK (Intensive Cylinder Cooling) Filling zone cooling: Water Filling zone cooling water consumption: 30 l/h Process parameters Melt pressure: max. 300 bar Melt temperature: max. 350 °C Injection height: 1,050 mm Dimensions and weight Weight: approx. 950 kg Length: 2,630 mm EQUIPMENT - Segmented screws and barrels - Synchronized technology - Degassing

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,600 mm, spindle speed (max.): 4,000 rpm, table length: 6,000 mm, TECHNICAL DETAILS Control: HEIDENHAIN X travel: 4,500 mm Y travel: 1,200 mm Z travel: 1,600 mm Movement and feed rates Feed rate: 5,000 mm/min Rapid traverse X/Y/Z: 15 m/min Crslq Unswa Au Djbljb Table Table clamping area (L x W): 6,000 x 1,000 mm Distance from table to spindle nose with vertical milling spindle: 870 mm Spindle and tool Tool holder: SK 50 Spindle speeds: 67 – 4,000 rpm EQUIPMENT - Accessories - Tools - Holders

Condition: used, IMI Type 1500 Stainless Steel Pasteurizer Crolq Unjwakr Rsblob Please Note: These lots are located in Preganziol, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 55,176 h, Functionality: fully functional, machine/vehicle number: A0230 A1231, laser power: 6,000 W, sheet thickness aluminum (max.): 15 mm, sheet thickness steel (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Travel X / Y / Z: 3,000 / 1,500 / 115 mm Workpiece weight: 900 kg Crjlq Unewck Idsblob Speed parallel/simultaneous: 200 / 300 m/min Control: Siemens Sinumerik 840 D Accuracy Minimum travel: 0.001 mm Positioning error: ± 0.1 mm Positioning spread: ± 0.03 mm Laser Model: TruFlow 6000 Power: 300 - 6,000 W Wavelength: 10.6 µm Beam mode: TEM01 Scanning frequency: 0.01 - 10 kHz Gases: CO2 / N2 / He Sheet thicknesses Mild steel: 25 mm Stainless steel: 25 mm Aluminum: 15 mm MACHINE DETAILS Dimensions: 11.25 x 4.6 x 2.4 m Weight: 12 t Power consumption: 37 - 76 kW Connected load: 109 kVA Beam on-time: 24,314 h Laser on-time: 55,176 h CO2 consumption: 1 l/h N2 consumption: 6 l/h He consumption: 13 l/h Cutting gas consumption: 500 - 2,000 l/h

Condition: excellent (used), Year of construction: 2020, Functionality: not functional, machine/vehicle number: 222100410, milling height: 150 mm, spindle diameter: 280 mm, milling length: 400 mm, milling spindle speed (max.): 2,800 rpm, No reserve price - guaranteed sale at the highest bid! For milling transom and door profiles made of aluminum and PVC TECHNICAL DETAILS Milling height: max. 150 mm Cslqjwaa Sys Unblerb Milling depth: max. 110 mm Milling length: max. 400 mm Profile height: max. 200 mm Milling cutter diameter: max. 280 mm Material stop swivel range: up to 60° to the right and left Drive Milling motor: 2.5 kW Speed: 2,800 rpm MACHINE DETAILS Maintenance has been performed by the manufacturer

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 22852-P5C3C5, sheet thickness (max.): 80 mm, table height: 750 mm, working width: 2,000 mm, working length: 6,000 mm, TECHNICAL DETAILS Cutting width (X): 2,000 mm Cutting length (Y): 6,000 mm Cutting height (Z): 220 mm Distance between torches: 100 mm Table height: 750 mm Speed & axes Maximum speed: 30 m/min Machine axes: X, Y, Z Positioning accuracy: ±0.01 mm Repeatability: ± 0.05 mm Plasma cutting unit Power: 63 kW Operating voltage: 210 V Torch height control: Available Puncture capacity mild steel (argon): 50 mm Puncture capacity mild steel (oxygen): 45 mm Puncture capacity stainless steel/aluminium: 38 mm Cutting capacity mild steel: 80 mm Cutting capacity stainless steel: 75 mm Cutting capacity aluminium: 50 mm MACHINES DETAILS Weight of the machine: 8,150 kg Overall width: 3,300 mm Overall length: 7,350 mm Overall height: 2,560 mm Operating voltage: 415 V Cslq Unjvyif Dobljrb

Year of construction: 2015, operating hours: 3,500 h, Condition: ready for operation (used), Functionality: fully functional, controller manufacturer: Siemens, TECHNICAL DETAILS Processable materials: PE, PP, PS, ABS + fillers Capacity: 50 – 200 kg/h Screws and barrels Crjlq Unbjv Uqf Islob Screw diameter: 2 × Ø 33.0 mm Length-to-diameter ratio (L/D): 54:1 Screw speed: max. 1,200 rpm Max. continuous operating temperature: 350 °C MACHINE DETAILS Motor power: 64.0 kW EQUIPMENT - Co-rotating screw conveyor - 2 × atmospheric degassing - 2 × side feeders - Segmented screws and barrels

Condition: used, Year of construction: 2021, machine/vehicle number: 306.11.006.21, 3 vacuum pumps BECKER VTLF2-250/0-79, year of manufacture: 2021, control panel, approx. 7 tools Colq Uov Tv Hbenbljrb

Condition: used, Functionality: fully functional, mileage: 202,038 km, power: 80 kW (108.77 HP), fuel type: diesel, Year of construction: 2008, Description: Crslqjvz Tc Ns Unblob Meiller three-way tipper, make: Volkswagen, type: Crafter 2.5 TDI, displacement: 2,461 cc, power: 80 kW (109 hp), mileage: 202,038, diesel, manual transmission, 3 seats, first registered: 06/2008, gross vehicle weight: 3,500 kg, braked towing capacity: 2,000 kg, weight: 2,600 kg, payload: 900 kg, MOT: new, second-hand, anti-lock braking system, traction control, electronic stability program, power steering, central locking with remote control, power windows, trailer hitch, 3 seats, tie-down eyes, center armrest, seat and steering wheel height adjustment, radio, airbag, bed dimensions: length: 3.37 m, width: 2.10 m

Condition: ready for operation (used), Year of construction: 2011, operating hours: 49,485 h, Functionality: fully functional, machine/vehicle number: A0270 A2061, laser power: 5,000 W, sheet thickness aluminum (max.): 12 mm, sheet thickness steel (max.): 25 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Travel X / Y / Z: 6,000 / 2,000 / 115 mm Workpiece weight: 2,800 kg Speed parallel/simultaneous: 200 / 300 m/min Control: Siemens Sinumerik 840 D Accuracy Minimum travel: 0.001 mm Positioning error: ± 0.1 mm Positioning variation: ± 0.03 mm Laser Cutting head: with CoolLine Model: TruFlow 5000 Power: 250 - 5,000 W Wavelength: 10.6 µm Beam mode: TEM01 Scanning frequency: 0.01 - 10 kHz Gases: CO2 / N2 / He Sheet thicknesses Mild steel: 25 mm Stainless steel: 20 mm Aluminum: 12 mm MACHINE DETAILS Dimensions: 16.95 x 5.55 x 2.55 m Weight: 16 t Crolqjwckyas Unblsb Power consumption: 33 - 72 kW Connected load: 109 kVA Beam on-time: 26,620 h Laser on-time: 49,485 h Compressed air connection: 7 - 10 bar Nitrogen connection: 30 bar Oxygen connection: 20 bar

Condition: ready for operation (used), Year of construction: 2006, operating hours: 20,000 h, Functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 60, 5-axis machining center with rotary table (C-axis) and swivel head (B-axis) TECHNICAL DETAILS X-travel: 760 mm Y-travel: 560 mm Z-travel: 560 mm Control: Siemens 840 D Powerline Tool holder: SK 40 Number of tool positions in the magazine: 60 Spindle speed: 0-12,000 rpm Pallet size: 630 x 500 mm Infinitely variable feed: 20-15,000 mm/min Rapid traverse: 50 m/min Crjlq Unbov T U U Rjljb MACHINE DETAILS Machine weight: approx. 12 t Space required: approx. 5.2 x 4.5 x 2.45 m Connected load: 64.2 kVA Total power requirement: 26 kW EQUIPMENT - Rotary table - Swiveling head - Pallet changer with 2 pallets - Tool changer with 60 positions

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 103342, travel distance X-axis: 850 mm, travel distance Z-axis: 315 mm, spindle speed (max.): 3,400 rpm, turning diameter: 340 mm, TECHNICAL DETAILS Turning diameter: 340 mm Swing diameter: 420 mm Turning height: 315 mm X-travel: 850 mm Z-travel: 315 mm Control: Siemens 840 DSL Celqjv T U T Ho Unblerb Spindle Spindle speeds (infinitely variable): 0 - 3,400 rpm Main motor power: 37 (48) kW Feed Feed range in X-direction: 0 - 45 m/min Feed range in Z-direction: 0 - 30 m/min Tool Tool system: 12-station turret head Tool drive power: 19 kW Tool speeds: 0 - 6,000 rpm MACHINE DETAILS Total power requirement: 60 kW Machine weight: approx. 12 t Space requirement: approx. 3.7 x 3.1 x 3.3 m EQUIPMENT - CNC vertical lathe - Automatic workpiece feed

Condition: used, Year of construction: 2018, EOS M100 DMLS Additive Manufacturing Machine (2018) Laser thickness : 15 30 ?m Production speed : 1 9 cm3/h (depending on material) Laser system : Fibre laser 200 W (cw) Max scan speed : 7 m/s Focus diameter : approx 75 ?m Connected loads : power consumption max. 1.5 kW Power supply 1/N/PE AC 230 V, 16 A Inert gas supply : 1 gas connection provided / Nitrogen or Argon Inert gas consumption : approx. 0.6 0.8 l/min Machine dimensions : 820 x 1839 x 1410 mm (W x H x D) Handling station dimensions : 729 x 1392 x 628 mm (W x H x D) Cjlq Uswa S Igenblorb Machine weight : 700 kg approx. Handling station weight : 100 kg Operating conditions : 15 30C Materials available : Stainless Steel 316L , Stainless Steel 17-4PH, Maraging Steel M300, Aluminum AlSi10Mg, Nickel 718, Titanium Ti6Al4V ELI Grade 23, Titanium CPTi Grade 2, Bronze CuSn, remanium star CL (CoCrW), rematitan CL (Ti6Al4V ELI)

Condition: used, Year of construction: 2021, operating hours: 19,074 h, machine/vehicle number: 2001406, Consisting of: Granule dosing system, gravimetric batch dosing system with integrated feeding system, 1 monitoring system, 4 single-screw extruders PERFORM-EX, year of construction: 2021, 1x diameter Ø: approx. 120 mm, L/D 30 (C), max. capacity: approx. 650 kg/h, 1x diameter Ø: approx. 80 mm L/D 34 (B), max. capacity: approx. 400 kg/h, 2x diameter Ø: approx. 55 mm L/D 34 (A-D), max. capacity: approx. 150 kg/h, each with infrared heating resistors and AC motors, pressure and temperature transducers, manual hydraulic screen changers, 1 extruder support structure, 1 feed block, 1 flat extrusion head CLOEREN/USA REFLEX, 1 two-chamber vacuum box, 1 Cast chill roll unit, year of manufacture: 2021, cylinder diameter Ø: approx. 1,400 mm, trigger roll Ø: approx. 300 mm with AC motorization, rotary couplings and rubber cleaning roll, 2 BIGMOUTH edge trim suction devices, with mill and transport device for re-feeding at the extruder Ø: approx. 120 mm, 1 IR-NDC thickness gauge with video, product coding and self-diagnosis unit, 2 3-axis automatic winders ALLSPEDY IV-SIMM/ALLSPEEDY IV, year of manufacture: 2020, serial no.: 190260612/190260613, 1 lateral sliding device, 1 pulling section, year of manufacture: 2021, serial no.: 1902606.11, 1 central line control station with HMI, max. Usable film width: approx. 6 x 500 mm, min. and max. film thickness: approx. 8-35 µg, total gross capacity: approx. 1,350 kg/h, with automated film packaging and conveying unit with vacuum lifter, machine protective housing Crslsv Tv H Ijq Unbleb

Condition: new, Year of construction: 2022, Functionality: fully functional, Generator, make: WF HUAZHONG, type: HZ75GF, 75 kW, new, unused, year of manufacture: 2022, size: 2.25 x 1.00 x 1.40 m, weight: 1,060 kg, 4-cylinder, water-cooled diesel engine, engine type: R4105AZD, each with 2 x 16 amp sockets (blue) and 2 x 32 amp sockets (red) Crjlqev Hamxo Unbleb

Condition: ready for operation (used), Year of construction: 2008, operating hours: 42,130 h, Functionality: fully functional, machine/vehicle number: A0270 A2021, laser power: 6,000 W, sheet thickness aluminum (max.): 15 mm, sheet thickness steel (max.): 25 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Travel X / Y / Z: 6,000 / 2,000 / 115 mm Workpiece weight: 2,800 kg Speed parallel/simultaneous: 200 / 300 m/min Control: Siemens Sinumerik 840 D Accuracy Minimum travel: 0.001 mm Positioning error: ± 0.1 mm Positioning spread: ± 0.03 mm Laser Model: TruFlow 6000 Power: 300 - 6,000 W Wavelength: 10.6 µm Beam mode: TEM01 Scanning frequency: 0.01 - 10 kHz Gases: CO2 / N2 / He Crolqswckt Hj Unblob Sheet thicknesses Mild steel: 25 mm Stainless steel: 25 mm Aluminum: 15 mm MACHINE DETAILS Dimensions: 16.95 x 5.55 x 2.55 m Weight: 16 t Power consumption: 43 - 89 kW Connected load: 109 kVA Beam on-time: 21,660 h Laser on-time: 42,130 h Compressed air connection: 7 - 10 bar Nitrogen connection: 30 bar Oxygen connection: 20 bar

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, product width (max.): 350 mm, product height (min.): 210 mm, product height (max.): 500 mm, product width (min.): 148 mm, paper weight (min.): 60 g/m², paper weight (max.): 350 g/m², No reserve price - guaranteed sale at the highest bid! OVERVIEW - VAC-60a Gathering Tower - VAC-60c Gathering Tower - HOF-30 Stacker Drop Table Stitchliner 5500 Saddle Stitcher - ACF-30 Gathering and Folding Unit - SPF-30 Saddle Stitcher - HTS-30 Three-Side Trimmer TECHNICAL DETAILS Gathering Towers Model: VAC-60a / VAC-60c Technology: Touch & Work Crelq Uewcf D Hjnbljb Type: Vacuum and Air Blower Gathering Tower Number of Stations: 6 Error Prevention: Misfeed, Double Feed, and Jam Detection Job Memory: 9 Memory Locations for Repeat Jobs Programs: Double Cycle (Non-Stop Operation), Interposer (1- and 2-Up), Booklet Program, Block Program, Selective Gathering Expandability: Up to 6 towers (36 stations) Format Range: Max. 148 - 500 × 120 - 350 mm Paper weight: 40 - 350 g/m² Loading capacity per station: 130 mm Production speed: up to 9,500 sets/h Power supply: 230 V; 50/60 Hz – 1.86 kW Dimensions (W × D × H): 842 × 652 × 1,961 mm Collating Towers Model: Horizon VAC-60Hc Function: Double-sided collating Use: Towers can be used separately Weight per tower: 310 kg Stack lowering table Model: Horizon HOF-30 Function: Non-stop operation despite misfeed and double feed detection Gathering system Model: Horizon Stitchliner 5500 Components: ACF-30 + SPF-30 + HTS-30 (Collating & Folding + Saddle Stitcher + Three-Side Trimmer) Format setting: Fully automatic Format templates: DIN formats and standard fold types Job memory: 200 memory locations for repeat jobs Stitching system Stitching options: Saddle stitch, block stitch, Corner stitching Stapling heads: 2 (optionally expandable to 4) Ring eyelet stitching: possible with ring eyelet stitching heads Staple spacing: 60 - 150 mm Stapling thickness: max. 5 mm (3 mm with ring eyelet) Processing Infeed format: 210 - 500 × 148 - 350 mm Paper weight: 60 - 350 g/m² Processing thickness: 8 - 200 pages Speed: max. 5,500 cycles/h Trimming Untrimmed format: 140 - 350 × 103 - 250 mm Trimmed format: 120 - 312 × 95 - 230 mm Space requirements and weight Installation area: min. 5,709 × 3,240 mm Stitchliner weight: 2,120 kg Power supply: 400 V / 50 Hz Part of the video shows a Horizon ST40, which was replaced with a HOF 30.

Condition: good (used), Year of construction: 2009, operating hours: 21,000 h, Functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 60, TECHNICAL DETAILS Control: HEIDENHAIN iTNC 530 X travel: 6,000 mm Y travel: 1,200 mm Z travel: 2,000 mm C-axis: 0.001° (preparation) Movement and Dynamics Rapid traverse X/Y/Z: 30 m/min Table Table clamping area (L x W): 7,500 x 1,100 mm Table load: max. 5,000 kg Spindle and Tool Spindle drive power: 60 kW Spindle speeds: 6,000 rpm Tool holder: SK 50 Tool changer: 60 Accuracy Crslqjwakxqj Unblsb Positioning accuracy: ±0.030 mm Repeatability: ±0.010 mm Head and axis options Automatic Universal swivel head: 1° × 1° 4th axis preparation: rotary table EQUIPMENT - Automatic universal swivel head - Accessories - Tools - Mounting fixtures - Preparation for rotary table (4th axis)

Condition: used, Year of construction: 2014, EOS M290 DMLS Additive Manufacturing Machine (2014) Build Volume : 250 x 250 x 325 mm (9.8 x 9.8 x 12.8 in) Laser Type : Yb-fiber laser; 1 x 400 W Presicion Optics : 1 F-theta-lens(es); 1 High-speed scanner(s) Scan Speed : up to 7.0 m/s (23.0 ft/s) Focus Diameter approx. 100 m (0.00394 in) Power Supply : 1 x 32 A Cslq Unbewa S D Islorb Power Consumption : max. 8.5 kW / typical 2.4 kW Compressed Air Supply : 7 Bar; 20 m/h (102 psi; 706 ft/h) Machine Dimensions : 2500 x 1300 x 2190 mm (98.4 x 51.2 x 86.2 in) Recommended Installation Space : min. 4800 x 3600 x 2900 mm (189.0 x 141.7 x 114.2 in) Weight approx. 1250 kg (2756 lbs)

Condition: used, Year of construction: 2020, operating hours: 20,308 h, machine/vehicle number: 1902606, Consisting of: Granule dosing system, gravimetric batch dosing system with integrated feeding system, 1 monitoring system, 7 single-screw extruders PERFORM-EX, year of construction: 2020, 2x diameter Ø: approx. 120 mm, L/D 30 (C-E), max. capacity: approx. 650 kg/h, 1x diameter Ø: approx. 80 mm L/D 34 (D), max. capacity: approx. 400 kg/h, 4x diameter Ø: approx. 65 mm L/D 34 (A-B-F-G), max. capacity: approx. 200 kg/h, each with infrared heating resistors and AC motors, pressure and temperature transducers, manual hydraulic screen changers, 1 extruder support structure, 1 feed block, 1 flat extrusion head CLOEREN/USA REFLEX, 1 Two-chamber vacuum box, 1 Cast chill roll unit, year of manufacture: 2020, cylinder diameter Ø: approx. 1,400 mm, trigger roll Ø: approx. 300 mm with AC motorization, rotary couplings and rubber cleaning roll, 2 BIGMOUTH edge trim suction devices, with mill and transport device for refeeding at the extruder Ø: approx. 120 mm, 1 IR-NDC thickness gauge with video, product coding and self-diagnosis unit, 2 3-axis automatic winders ALLSPEDY IV-SIMM/ALLSPEEDY IV, year of manufacture: 2020, serial no.: 190260612/190260613, 1 lateral sliding device, 1 pulling section, year of manufacture: 2020, serial no.: 1902606.11, 1 central Line control station with HMI, max. usable film width: approx. 6 x 500 mm, min. and max. film thickness: approx. 8-35 µg, total gross capacity: approx. 2,500 kg/h, 1 automated film wrapping and handling unit, consisting of: 1 pallet wrapping unit ITALIAN ROBOT Ambrogio, year of manufacture: 2021, serial no. 884, vacuum conveyor unit, 1 machine protective enclosure Crelev Tv Hzoq Unblob

Condition: used, Year of construction: 2021, DMG DMU50 5 Axis CNC Machining Centre (2021) 5 axis Working area Travels X / Y / Z mm 650 / 520 / 475 Main drive Speed range rpm 20 15,000 Drive power (40 / 100 % DC) kW 21 / 16 Torque (40 / 100 % DC) Nm 111 / 85 Crolqjwa S Aqo Unbleb Feed Rapid traverse X / Y / Z m/min 42 Maximum thrust force X / Y / Z kN 4.8 Swivelling rotary table Clamping area mm 630 500 B- / C-axis speed rpm 30* Maximum load kg 300 Swivel range Degrees 35 / +110 Tool magazine with double gripper Storage positions Number 30 / 60 / 120 Maximum tool length mm 300 Maximum tool diameter mm 80 / 130 Tool weight max. kg 8 60 ATC. HSK63. Machine weight / connected values Weight kg 7,480 Operating Hours: 18236,5 hours

Condition: used, Year of construction: 2020, EOS M300-4 DMLS Additive Manufacturing Machine (2020) Build volume : 300 x 300 x 435* mm (11.8 x 11.8 x 17.1 in) Laser type : Yb-fiber laser; 4 x 400 W Precision optics : 4 F-theta-lens(es); 4 High-speed scanner(s) Scan speed: up to 7.0 m/s (23.0 ft/s) Focus diameter: approx. 100 m (0.00394 in) Power supply : 3 x 63 A Power consumption : max. 19.6 kW / typical 16.0 kW Compressed air supply: 7 Bar; 15 m/h (102 psi; 530 ft/h) Flexible dispenser Serial number : P.13.1B.0033 Year : 2019 Transfer station Serial number : P.11.1B0026 Year : 2019 Hydac cooling system Type : RFCS-G3-04500-W-L-R25-7-IW-UL Serial number : 4052929 EOS Sieving unit Crolqjwa Swzo Unbleb Model : CM M Pro Crown pedestrian truck Model : EOS Sirius Serial number : EOS 1603 Year : 2020 Capacity 600kgs

Condition: used, Year of construction: 2017, Alzmetall GS800/5 5 Axis CNC Machining Centre (2017) 5 axis X-Axis 660 mm Y-Axis 800 mm Z-Axis 550 mm Interference circle diameter 800 mm Distance Spindle up to 650 mm Machine-Table Load 500 kgs Maximum rapid travel X/Y/Z at TCP max. 75 m/min Cutting-Tool Interface HSK-A63 Motor-Spindle-Power at CDF 25% max. 16 kW Variable Speed Range max. 10.000 mm-1 Crelewa Sy Aoq Unbljb Motor-Spindle Torque at CDF 25% max. 102 Nm Heidenham touch screen control Wiring diagram : 2865-95-653991 Machine weight 13,000 kgs Resy filtration system Swarf conveyor Erowa pallet changer model RobotEasy Serial number ERE.3048 Year 2017 Weight 1300kgs

Condition: used, Year of construction: 2018, Alzmetall GS600/5-T 5 Axis CNC Machining Centre (2018) X-Axis 460 mm Y-Axis 600 mm Z-Axis 400 mm Interference circle diameter 640 mm Distance Spindle Up to 550 mm Machine-Table Load 500 kg Maximum rapid travel X/Y/Z at TCP max. 75 m/min Cutting-Tool Interface HSK-A63 Motor-Spindle-Power at CDF 25% max. 26 kW Motor-Spindle Torque at CDF 25% max. 116 Nm Wiring diagram : H5774-95-2845 Machine weight 7000 kgs Resy filtration system Crelq Unewa Sycebljb Model: KBF - 452/500 Serial number 18-P02571 Swarf conveyor and Tolley Erowa pallet changer Model :RobotEasy Serial number : ERE 4045 Year 2018 Table size 31.5 inches (800 mm) Tool changer capacity 32 tools

Condition: used, Year of construction: 2022, 5 axis X-Axis 800 mm Y-Axis 800 mm Z-Axis 600 mm Crelqowa Sv Do Unblob Interference circle diameter 1070 mm Distance Spindle Up to 823,5 mm Machine-Table Load 1000 Kg Maximum rapid travel X/Y/Z at TCP max 75 m/min Cutting-Tool Interface HSK-A63 Motor-Spindle-Power at CDF 25% max 50kW Motor-Spindle Torque at CDF 25% max 187 Nm Wiring diagram :H65262-95-2527 Machine weight : 16500 kgs Filtration system Model : MS-syst-00013 Serial number : 1088377 Lahntechnik Chiller unit Model : BL 058-345 Serial number : E-50681 Year 2022 Swarf conveyor and trolley Indunorm pallet changer Year 2023 Serial number ALZ300-003 Weight 2250 kgs