Second-hand machinery for sale (2,404)

Condition: good (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 551739, feed length X-axis: 384 mm, feed length Y-axis: 317 mm, feed length Z-axis: 217 mm, grinding wheel diameter: 203 mm, rotational speed (max.): 10,000 rpm, Tool grinder with grinding wheel changer and Fanuc automation FastLoad FastLoad loading system Special feature: Fully contained in the machine casing Area of application: Automation solution for low production volumes Djln E S Hsv Ednqevscg Access: Operator access from the front of the machine Grip set: One set for the entire diameter range Space requirement: Does not increase the machine footprint TECHNICAL DETAILS Peak power grinding spindle: 9.5 kW Directly driven grinding spindle: yes Speed: 10,000 rpm Number of numerically controlled axes: 5 Grinding wheel diameter: 203.5 mm Grinding wheel changer: 2 slots Axes X-axis: 384 mm Y-axis: 317 mm Z-axis: 217 mm C-axis: 230° A-axis: 360° A-axis rotation: 600 rpm Tool handling Suitable tool diameter: Ø2 - 20 mm Tool length range: 30 - 150 mm Charging time: 20 seconds Number of tools Ø2 mm: 153 Number of tools Ø12 mm: 36 Measurement and tool control Measuring probe mounted on the grinding head: yes Measurement of the tool profile: directly on the machine without removing the tool MACHINE DETAILS Machine base made of polymer concrete: yes Installation dimensions: 1,930 x 2,190 x 2,015 mm Machine weight: 4,500 kg Connected load: 14.5 kVA EQUIPMENT - Measuring probe on the grinding head - Possibility of direct tool profile measurement - Machine base made of polymer concrete

Condition: like new (used), Year of construction: 2019, operating hours: 720 h, Functionality: fully functional, machine/vehicle number: D4D194801, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 720 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Maximum faceplate diameter: 200 mm Maximum chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed settings: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Dceln Ejv Iqm Se S Hvjg Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 720 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set with parting tool (3 x standard, 1 x parting)

Condition: ready for operation (used), Year of construction: 1998, operating hours: 19,162 h, Functionality: fully functional, machine/vehicle number: 1108 000002 3, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 90 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-travel: 600 mm Y-travel: 525 mm Z-travel: 500 mm Control system: HEIDENHAIN Head swivels: ±90° Work table Table clamping area: 1,000 x 543 mm Table load: max. 350 kg Spindle Spindle mount: SK 40 Standard: DIN 69871 Spindle speeds (infinitely variable): 20 - 12,000 rpm Feeds and rapid traverse Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X-axis: 18 m/min Rapid traverse Y-axis: 18 m/min Rapid traverse Z-axis: 15 m/min Djln E Sov Exhxj Hvocg MACHINE DETAILS Total power requirement: 26 kVA Machine weight: approx. 4.2 t Machine dimensions (L x W x H): 2.95 x 2.1 x 2.26 m Coolant system: yes On time: 24,220 h Spindle hours: 19,162 h Any visible vices, tool holders and chucks are not part of the scope of delivery!

Condition: ready for operation (used), Year of construction: 2006, operating hours: 9,442 h, Functionality: fully functional, machine/vehicle number: 29110004034, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Control: Siemens 810D Powerline Table surface: 1,250 x 600 mm X-axis travel: 1,040 mm Y-axis travel: 600 mm Dsln E S Hswa Tmwevocg Z-axis travel: 500 mm Spindle & tool holder Tool holder: SK 40 Spindle speeds: 1 - 12,000 rpm Spindle drive: 13 kW / 19 kW (100% / 40% ED) Tool changer: 30 positions MACHINE DETAILS Spindle hours: 9,442 h On-time: 32,189 h EQUIPMENT - Linear drive in the X-axis for more precise movements - Bed flushing to clean the work area - Spiral chip conveyor for efficient chip disposal - Direct position measuring system for precise Position determination - Temperature compensation of the Z-axis via temperature sensor with active cooling unit - Blown air from outside via two pipes for chip removal

Condition: excellent (used), Year of construction: 2020, operating hours: 537 h, Functionality: fully functional, turning length: 1,450 mm, turning diameter: 425 mm, spindle speed (max.): 3,250 rpm, travel distance X-axis: 307 mm, travel distance Y-axis: 60 mm, travel distance Z-axis: 1,240 mm, controller model: DMG MORI SLIMline® Multi-Touch Steuerung, Equipment: documentation/manual, 2-axis universal lathe with C-axis and Y-axis and driven tools TECHNICAL DETAILS Control: Siemens SLIMline multi-touch Swing diameter over bed: 700 mm Djljv D Hnqjn E S Hvscg Swing diameter over slide: 370 mm Max. turning diameter: 425 mm Recommended turning diameter: 320 mm X-axis: 307.5 mm Y-axis: ±60 mm Z1-axis: 1240 mm Spindle distance between main and counter spindle: 1450 mm Main spindle Spindle type: SMW BB-D 255/A2-8" Spindle nose: A2-8" Max. speed: 3,250 rpm Clamping diameter: 255 mm Drive power (40/100%): 33 / 22 kW Torque (40/100%): 630 / 420 Nm Turret Number of tools: 12 Number of driven tools: 12 Holder diameter: 40 mm Tool holder: VDI 40 Number of BT tool positions: 6 Index time 30°: 0.46 s Speed: 4,000 rpm Power: 5.44 kW Torque: 20 Nm Tailstock Type: hydraulic Travel path: 1,200 mm Force: 12 kN Position accuracy: 0.2 mm Centering point size: MK 5 Rapid traverse: 4 m/min Rapid traverse & accuracy Rapid traverse X/Z axis: 30 m/min Rapid traverse Y axis: 22.5 m/min Accuracy X / Y / Z: 10 µm Accuracy C: 10 arc seconds MACHINE DETAILS Connection power: 60 kVA Operating hours: 2,822 h Spindle hours: 537 h Hydraulics Tank: 17 l Pressure: 55 bar Cooling Chip conveyor: 245 l Pump power: 0.85 kW Pump flow: 20 l/min EQUIPMENT - Through hole: D 82 mm - Chip conveyor - Hydraulic hollow clamping cylinder system for up to Ø80 mm bars - Hydraulic tailstock with pedal control - Electronic handwheel - Set with hard and soft clamping jaws - Collets  - Manual tool measuring probe - DMG Mori Io Tconnector - Documentation Machine has slight transport damage on the side panel on the left (see pictures)

Condition: good (used), Year of construction: 2011, operating hours: 15,971 h, Functionality: fully functional, laser power: 4,000 W, laser hours: 15,971 h, overall weight: 22,500 kg, sheet thickness (max.): 8 mm, Application by the end of 2024 - submission of bids obliges timely collection. Machine including special equipment and automation TECHNICAL DETAILS Working area: 2500 x 1250 mm Laser: TruFlow 4000 Laser power: 4000 W Punching Max. sheet thickness: 8 mm Max. Workpiece weight: 200 kg Max. Punching diameter: 76.2 mm Liner arm magazine: 22 tool positions with 3 clamping claws Punching force: 220 kN Parts flap: 500 x 500 mm Control system Control type: Rexroth IndraMotion MTX Positioning accuracy: 0.1 mm Operating data Operating hours: 80,968 / 81,053 / 15,971 h MACHINE DETAILS Length: 8070 mm (basic machine) Width: 8550 mm (basic machine) Height: 2730 mm (basic machine) Weight: 22,500 kg (basic machine) EQUIPMENT - Standard - Adjustment device with programmable hold-down device - Foot switch for closing clamps - Ball tables - 2 good parts containers - Chip container - Transport and assembly device - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - Liftable laser cutting support - LensLine - High-frequency excitation - Cooling unit - Laser control TASC 4 - Electro-hydraulic punching head - Tool length compensation - Adjustable hold-down force - Spray lubrication punch - Bulge detection - Level monitoring Thread forming and tool lubrication - Laser cutting head with 170 mm focal length - Universal cutting head quick-change device, UTI with bus connection - ControlLine - USB interface and RJ45 network connection - CE marking - Dual-beam light barriers - Protection against stray radiation - Compact dust extraction system EQUIPMENT - extended - TruFlow 4000 including LensLine - Active die - Spray lubrication die - MultiTool function - Thread forming function - Marking function - Engraving function - Rolling technology function - Adaptive stroke calibration Djln E Ssu Rbg Ee Hvscg - StripLine - Repositioning cylinder - Vibration-damped installation - Chip conveyor with container - Table extension - Special thin sheet machining - Brush tables - Blow-out device for small parts AUTOMATION SheetMaster 2500 x 1250 mm - Suction cup frame with 36 suction cups (y-axis = 400 mm) - Movable suction cup bars (v-axis = 120 mm) - Peeling suction cups - Suction cup plate module - Vacuum sensor system - Central lubrication - Sheet thickness gauge for double sheet control - Automatic clamp closing SheetMaster Loading and unloading parallel to production time Peeling system Unloading monitoring GripMaster 2500 x 1250 mm - Residual skeleton grippers with sensors - Residual skeleton pallet can be tilted ToolMaster with 40 stations Main time parallel set-up Trolley systems (2500 x 1250 mm on rails) Loading/unloading double trolley incl. storage interface Including 1 set of set-up cassettes with die plates (21 pieces)

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 700275, punching force: 18 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,030 mm, travel distance Y-axis: 1,275 mm, punching diameter: 76 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Maximum sheet thickness: 6 mm Punching pressure: 18 t Maximum punching diameter: 76 mm Table load: max. 75 kg Travel path - x: 1,275 mm Travel path - y: 2,030 mm Control Control type: CNC MACHINE DETAILS Connection value: 17 kVA Mains voltage: 400 V Machine weight: approx. 10 t EQUIPMENT Dcoln Ejvtckas S Hvsg - Documentation available

Condition: like new (used), Year of construction: 2021, operating hours: 470 h, Functionality: fully functional, machine/vehicle number: D4D210301, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 460 spindle hours. TECHNICAL DETAILS Dcsln E Sev Iqlzs Hvsg Center distance: 700 mm Center height: 170 mm Swing over bed: 340 mm Swing over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed levels: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck (soft jaws, internally and externally stepped) - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set (3 x standard, 1 x parting-off)

Condition: ready for operation (used), Year of construction: 1998, operating hours: 17,785 h, Functionality: fully functional, machine/vehicle number: 1108 000006 3, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 90 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-travel: 600 mm Y-travel: 525 mm Z-travel: 500 mm Control system: HEIDENHAIN Head swivels: ±90° Work table Table clamping area: 1,000 x 543 mm Table load: max. 350 kg Spindle Dcolsv Exgzen E S Hvsg Spindle mount: SK 40 Standard: DIN 69871 Spindle speeds (infinitely variable): 20 - 12,000 rpm Feeds and rapid traverse Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X-axis: 18 m/min Rapid traverse Y-axis: 18 m/min Rapid traverse Z-axis: 15 m/min MACHINE DETAILS Total power requirement: 26 kVA Machine weight: approx. 4.2 t Machine dimensions (L x W x H): 2.95 x 2.1 x 2.26 m Coolant system: yes On time: 18,534 h Spindle hours: 17,785 h Any visible vices, tool holders and chucks are not part of the scope of delivery!

Condition: good (used), Year of construction: 2010, operating hours: 720 h, Functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 3,000 mm, Reserve price removed - guaranteed acceptance to the highest bidder.  TECHNICAL DETAILS Travel path X: 2,000 mm Dolevuzxlsn E S Hvecg Travel path Y: 3,000 mm EQUIPMENT - High frequency spindle - 2 x Kuka KR 210 R2700-2 / reach 2,700 mm Nominal load capacity: 210 kg / Year of manufacture 2001 + 2002 - Enclosure

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, measuring range X-axis: 800 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Measuring range: 800 x 1,000 x 700 mm Limit of length measurement uncertainty: E₀ = 2.8 + L/250 µm Condition: newly painted, desk shape with new worktop and current color design Control and operating elements CNC control: WPC Controller table: 1 piece Hand control panel: HT 400 Touch system: Renishaw PH10 Probe: switching probe Renishaw TP 20 Reference sphere: 1 piece Software and PC system Software: WM | QUARTIS GEO for regular geometry applications (as of 2022-1) CAD interface: WM I QUARTIS STEP import interface (as of 2022-1) Dcjlnsvupv Eo E S Hveg Software dongle: 1 x Metrokey PC system: WIN 10 Monitor: 24 ’’ TFT

Condition: good (used), Year of construction: 2008, operating hours: 59,000 h, Functionality: fully functional, punching force: 18 t, punching diameter: 76 mm, workpiece weight (max.): 150 kg, controller model: Bosch Typ 3, TECHNICAL DETAILS Working area: 2540 x 1270 mm Punching force: 18 t Max. sheet thickness: 6.4 mm Max. workpiece weight: 150 kg Max. punching diameter: 76.2 mm Control: Bosch Type 3 Positioning accuracy: 0.1 mm Speeds X-axis: 90 m/min Y-axis: 60 m/min Simultaneous movement (X/Y): 108 m/min MACHINE DETAILS Machine dimensions (LxWxH): 5500 x 5900 x 2200 mm Machine weight: 11,400 kg EQUIPMENT - stable, easily accessible C-frame - coordinate guide for high-precision machining - linear magazine with 19 tool positions, 2 clamping claws - drives with maintenance-free Three-phase servo motors - Follow-up device with programmable hold-down - Ball tables Dcolnev E N S Us E S Hvog - Part slide 180 x 200 mm - 2 good parts containers - Chip container - Automatic shutdown

Condition: like new (used), Year of construction: 2019, operating hours: 520 h, Functionality: fully functional, machine/vehicle number: F3M194801, feed length X-axis: 300 mm, feed length Y-axis: 200 mm, feed length Z-axis: 350 mm, spindle speed (max.): 2,200 rpm, controller model: Heidenhain ND7000, The machine was used for training purposes and has only approximately 520 spindle hours. TECHNICAL DETAILS Horizontal longitudinal feed (X): 300 mm Horizontal transverse feed (Y): 200 mm Vertical table feed (Z): 350 mm Fixed angle table Clamping surface (L x W): 600 x 200 mm Width/number of T-slots: 12 x 21 mm / 4 pieces Dcelov Iqbcjn E S Hvog Permissible workpiece weight: max. 50 kg Horizontal milling spindle (behind vertical milling head) Tool holder: DIN 2080 SK 30 Mechanical speed settings: 8 Speed range: 80 - 2,200 rpm Distance to table surface: 80 - 430 mm Vertical milling head Tool holder: DIN 2080 SK 30 Quill stroke: 45 mm Pivoting vertical milling head: ± 90° Mechanical speed settings: 8 Speed range: 80 - 2,200 rpm Distance to table surface: 35 - 385 mm MACHINE DETAILS Spindle hours: approx. 520 h Dimensions: 1,410 x 1,150 x 1,550 mm Weight: 500 kg EQUIPMENT - Pivoting vertical milling head ± 90° - Tool radius correction - Vice and collets - Drill chuck and parallel supports

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 570 023 4, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, table width: 500 mm, table length: 700 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 710 mm Y-axis travel: 520 mm Z-axis travel: 520 mm Work table length: 700 mm Work table width: 500 mm Spindle Spindle speed (min.): 20 rpm Spindle speed (max.): 12,000 rpm Spindle motor power: 25,000 W Rapid traverse speed & feed rate X-axis rapid traverse: 30 m/min Y-axis rapid traverse: 30 m/min Z-axis rapid traverse: 30 m/min X-axis feed rate: 10 m/min Y-axis feed rate: 10 m/min Z-axis feed rate: 10 m/min MACHINE DETAILS Total height: 3,300 mm Total length: 4,600 mm Total width: 5,500 mm Total weight: 6,000 kg Input voltage: 400 V Dcsln Eov Exdmo S Hvog Type of input current: three-phase Any vices, tool holders and chucks shown are not part of the scope of delivery!

Condition: excellent (used), Year of construction: 2017, operating hours: 9,380 h, Functionality: fully functional, machine/vehicle number: 4455, travel distance X-axis: 3,740 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 480 mm, spindle speed (max.): 60,000 rpm, Reserve price removed - guaranteed to go to the highest bidder. TECHNICAL DETAILS X-travel: 3740 mm Y-travel: 2800 mm Dcsln E Sevuztio Hvog Z-travel: 480 mm Control: Siemens Sinumerik ONE - HMI Operate user interface, WIN 10 Spindle speed: 60,000 rpm Spindle axis manufacturer: GMN Extraction: Ruwac Zone 22 Extraction hood: rigid or height-adjustable EQUIPMENT - 1 Kuka KR 420 R3300 robot / reach 3326 mm, nominal payload 420 kg - 1 Kuka KR 200 L140-2comp robot / reach 2800 mm, nominal payload 140 kg - 1 Kuka KR 140-3comp robot / reach 2400 mm, nominal payload 140 kg - Conveyor belt for transporting the scrap metal - Chip conveyor belt

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, measuring range X-axis: 650 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 500 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Measuring range: 650 x 1,000 x 500 mm Limit of length measurement uncertainty: E₀ = 2.8 + L/250 µm Condition: newly painted, desk shape with new worktop and current color design Control and operating elements CNC control: WPC Controller table: 1 piece Hand control panel: HT 400 Touch system: Renishaw PH10 Dcolnovupvls E S Hvog Probe: switching probe Renishaw TP 20 Reference sphere: 1 piece Software and PC system Software: WM | QUARTIS GEO for regular geometry applications (as of 2022-1) CAD interface: WM I QUARTIS STEP import interface (as of 2022-1) Software dongle: 1 x Metrokey PC system: WIN 10 Monitor: 24 ’’ TFT

Condition: ready for operation (used), Year of construction: 2004, operating hours: 21,321 h, Functionality: fully functional, machine/vehicle number: 0418490010, working width: 1,650 mm, workpiece height (max.): 920 mm, TECHNICAL DETAILS Workpiece thickness: 0.6 - 150 mm Working width: 1650 mm Deln E S Hjv E Ny Ssvecg Workpiece height: 920 mm Grinding belt & drive Grinding belt width: 1670 mm Grinding belt length: 2620 mm Aggregates & performance 1st aggregate: 18.5 kW (grinding belt drive, 1 speed) 2nd aggregate: 15 kW (grinding belt drive, 1 speed) 3rd aggregate: 11 kW (disc brush - round brush) 4th aggregate: disc brush - round brush MACHINE DETAILS Weight: 7,200 kg Total connected load: 63 kW

Condition: like new (used), Year of construction: 2016, operating hours: 290 h, Functionality: fully functional, machine/vehicle number: F1F 161101, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, rotational speed (max.): 14,000 rpm, Milling machine including engraving spindle and 4th axis, as well as automation setup! The machine was used for training purposes and has only approximately 290 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive: Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Dcsln E Sev Ip Izo Hvog Max. tool weight: 1 kg Max. tool diameter with/without changer: Ø 40 / 60 mm Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Total weight including tool changer: 220 kg Spindle hours: 290 h EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic handwheel - Swivel table with keyboard extension - Pneumatic vise 72 mm - 4th axis with three-jaw chuck - Engraving spindle unit (4:1 ratio) including 6 collets (1/1.5/2/2.4/3/3.2 mm) and union nut - Pneumatic automatic door and clamping device - I/O expansion board, robotics and DNC interface - Comprehensive tool set for operation, operating manual with spare parts list

Condition: ready for operation (used), Year of construction: 2007, operating hours: 97,307 h, Functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection weight: 94 g, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Injection unit - plasticizing cylinder: B Screw diameter: 30 mm L/D ratio: 20 Specific injection pressure: 1,995 bar Displacement volume: 106.0 cm³ Injected part weight (PS): 94 g Max. dosing path: 150 mm Max. nozzle path: 200 mm Nozzle immersion depth (SVO): 40 mm Nozzle contact force: 60 kN Dcsln Eov Exbls S Hveg Installed cylinder heating: 8.3 kW Filling hopper capacity: 35 L Total machine Oil tank capacity: 180 l Pump unit: 22.0 kW Installed total power: 30.3 kW Dry cycle rate according to EUROMAP 6a: 1.92 s - 259 mm Noise level (unpressurized circulation): 57.0 dB (AS) Noise level (power): 71.0 dB (AS) Switch-on time: 97,307 h Cylinder heating: 55,786 h Machine cycles: 3,160,294 Any visible vices, tool holders and chucks are not part of the scope of delivery!

Condition: like new (used), Year of construction: 2020, operating hours: 70 h, Functionality: fully functional, machine/vehicle number: F1F 204605, travel distance X-axis: 190 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 260 mm, spindle speed (max.): 3,500 rpm, table width: 125 mm, table length: 420 mm, Machine is prepared for automation! The machine was used for training purposes and has only approximately 70 spindle hours. TECHNICAL DETAILS X-axis travel: 190 mm Y-axis travel: 140 mm Z-axis travel: 260 mm Usable Z-axis slide travel: 120 / 190 mm Distance from spindle nose to table surface: 77 - 337 mm Control: Heidenhain TNC 426 Mill Milling table Clamping surface (L x W): 420 x 125 mm Max. table load: 10 kg T-slots according to DIN 650: 2 x 11 mm T-slot spacing: 90 mm Milling spindle drive Three-phase asynchronous motor, power: 0.75 kW Speed range (infinitely variable): 150 - 3,500 rpm Max. torque: 3.7 Nm Engraving spindle speed: 14,000 rpm Tool changer Number of tool stations: 8 Max. tool weight: 1 kg Max. tool diameter with/without tool changer: Ø 40 / 60 mm Feed drive Accuracy thanks to 3-phase stepper motors: 0.5 µm Working feed and rapid traverse: 0 - 2 m/min Average position variation: 0.008 mm MACHINE DETAILS Spindle hours: approx. 70 h Footprint (W x D): 960 x 1,000 mm Total height: 980 mm Dcsln E S Hov Ip Aleveg Total weight including tool changer: 220 kg EQUIPMENT - Win3D View simulation - 8-station tool changer with pick-up system and blow-out device - Electronic Handwheel - Swivel table with keyboard extension - I/O expansion board, robotics and DNC interface - Comprehensive tool kit for operation, operating instructions with spare parts list

Condition: good (used), Year of construction: 2008, operating hours: 11,667 h, Functionality: fully functional, machine/vehicle number: 5X1005, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 14,000 rpm, swivel angle B-axis (min.): -120 °, swivel angle B-axis (max.): 30 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Commissioning: November 2009 Travel paths X - Y - Z: 1,100 - 610 - 810 mm Dcolsv Ew T Hen E S Hvjg CNC rotary table: 610 mm NC controlled milling head (B-axis): +30° / -120° Spindle Spindle speed: 14,000 rpm Double gripper with tool magazine: 40-way Internal coolant supply: 40 bar with MAHLE filter HEIDENHAIN CollisionMonitoring: yes M & H infrared measuring probe: yes Operating mode: 2 MACHINE DETAILS Spindle running hours: 11,668 h Switch-on time: 31,053 h Control switch-on time: 42,230 h Spindle replacement: March 2017 Weight: 7.5 t Connected load: 75 kVA EQUIPMENT - Central lubrication - Control cabinet - Telescopic covers - Water cooler - Heidenhain scales in all axes - Chip conveyor: hinged belt design in X-axis - Coolant system - Work lamp - Machine cover - Machine manuals - HEIDENHAIN CollisionMonitoring - M & H infrared measuring probe - 40-way tool magazine - Internal coolant supply with 40 bar MAHLE filter - Chip conveyor in hinged belt design Any visible vices, tool holders and chucks are not part of the scope of delivery!

Condition: like new (used), Year of construction: 2011, operating hours: 400 h, Functionality: fully functional, machine/vehicle number: 6BE1AZ2661, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 20, swivel angle A-axis (min.): -100 °, swivel angle A-axis (max.): 100 °, The machine was used for training purposes and has only approximately 400 spindle hours. TECHNICAL DETAILS X-axis: 600 mm Y-axis: 500 mm Z-axis: 500 mm B-axis swivel range: ± 100° A/B-axis speed: 22 / 16 rpm X/Y/Z rapid traverse: 24 m/min Doln E S Hjv Ipnhsvscg Control: Heidenhain TNC 426 Mill Worktable Clamping area: 700 x 520 mm Tolerance: 5 T-slots with 18 mm Load capacity: 500 kg Spindle Speed range: 50 - 12,000 rpm Drive power: 11 kW Tool changer Tool magazine: 20-station Change mechanism: Automatic double-arm quick changer with Tool length adjustment device Tool holder: SK 40 with directional logic (DIN 69871) Tool diameter: 80 / 125 mm Tool length: 250 mm Tool weight: 8 kg MACHINE DETAILS Spindle hours: approx. 400 h Dimensions: 2,040 x 2,445 x 2,920 mm Weight: 4 t Air pressure: 6 bar EQUIPMENT - Win3D View simulation - 5th-axis rotary swivel unit, built in 2013 - Electronic handwheel - Coolant system (internal coolant supply possible) - Comprehensive tool set for operation - Tool cabinet with 66 tool holders - Center-clamp vise and three-jaw chuck - Tool blow-out device - Cover including chip protection door - Leveling elements - 3 pieces

Condition: like new (used), Year of construction: 2016, operating hours: 180 h, Functionality: fully functional, machine/vehicle number: A6D160702, turning diameter: 60 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 60 mm, travel distance Z-axis: 280 mm, turning diameter over bed slide: 130 mm, bar passage: 15 mm, Machine is prepared for automation! The machine was used for training purposes and has only approximately 180 spindle hours. TECHNICAL DETAILS Travel in X / Z: 60 / 280 mm Bar capacity: 15 mm Turning diameter: 60 mm Part length with tailstock: 60 mm Swing diameter over bed: 130 mm Tool cross-section for external machining: 12 x 12 mm Tool cross-section for internal machining: Ø 10 mm Rapid traverse speed: 3 m/min Working feed: 0 - 2 m/min Delov Ipbuen E S Hvscg Max. feed force: 1,000 N Main spindle Max. speed: 300 - 4,200 rpm Spindle connection: EMCO Max. drive power: 1.1 kW Max. torque: 10 Nm Tailstock & turret Quill stroke: 35 mm Number of tool positions: 8 MACHINE DETAILS Spindle hours: 180 h Dimensions (L x W x H): 895 x 745 x 550 mm Machine weight: 150 kg Control: Win NC Siemens Sinumerik Operate EQUIPMENT - EMCO Win 3D-View Simulation - Portable machine control panel - Workbench converted into a machine base with swivel table - Electronic handwheel - Optical tool presetter - Tailstock - Pneumatic chuck - Automatic door - I/O expansion board for robotics and DNC interface

Condition: excellent (used), Year of construction: 2020, operating hours: 60 h, Functionality: fully functional, machine/vehicle number: A6D204605, turning diameter: 60 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 60 mm, travel distance Z-axis: 280 mm, bar passage: 15 mm, The machine was used for training purposes and has only approximately 60 spindle hours. TECHNICAL DETAILS Travel in X / Z: 60 / 280 mm Bar capacity: 15 mm Turning diameter: 60 mm Part length with tailstock: 60 mm Swing diameter over bed: 130 mm Tool cross-section for external machining: 12 x 12 mm Tool cross-section for internal machining: Ø 10 mm Rapid traverse speed: 3 m/min Working feed: 0 - 2 m/min Max. feed force: 1,000 N Main spindle Max. speed: 300 - 4,200 rpm Spindle connection: EMCO Max. drive power: 1.1 kW Max. torque: 10 Nm Tailstock & turret Quill stroke: 35 mm Dcolnev In Nko E S Hvog Number of tool positions: 8 MACHINE DETAILS Spindle hours: approx. 60 h Dimensions (L x W x H): 895 x 745 x 550 mm Machine weight: 150 kg Control: Win NC Siemens Sinumerik Operate EQUIPMENT - EMCO Win 3D-View Simulation - Portable machine control panel - Workbench converted into a machine base with swivel table - Electronic handwheel - Chuck

Condition: like new (used), Year of construction: 2015, operating hours: 272 h, Functionality: fully functional, machine/vehicle number: S4E150081, turning length: 510 mm, turning diameter over cross slide: 300 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 6,300 rpm, turning diameter over bed slide: 430 mm, Machine with C-axis, driven tools, and bar feeder! The machine was used for training purposes and has only 272 spindle hours. TECHNICAL DETAILS Swing diameter over bed: Ø 430 mm Swing diameter over cross slide: Ø 300 mm Max. turning length: 510 mm Control: Siemens Sinumerik Operate Travel range Travel in X: 160 mm Travel in Z: 510 mm C-axis: 360° Main spindle Draw tube inner diameter / spindle bore: Ø 45 mm / Ø 53 mm Speed range: 0 - 6,300 rpm Spindle torque: 78 Nm Spindle bearing (inner diameter): Ø 80 mm Drive power: 8 / 13 kW Dcsln E Sov Imzfs Hvsg Tool changer Number of tool positions: 12 Spindle shank: VDI 30 Tool cross-section for Square tools: 20 x 20 mm Shank diameter for boring bars: Ø 32 mm Number of driven tools: 6 Torque: 16 Nm Drive power: 4 kW Drives Rapid traverse speed X / Z: 24 / 30 m/min Rapid traverse speed C: 250 rpm Feed force in the X-axis: 4,000 N Feed force in the Z-axis: 6,000 N Positioning range Ps (according to VDI 3441) X / Z: 0.003 / 0.003 mm Tailstock Tailstock travel: 510 mm Max. contact force: 6,000 N Internal taper for holding the live center: MK 4 MACHINE DETAILS Spindle hours: 272 h Height of the rotary axis above floor: 1,100 mm Machine height: 1,958 mm Machine footprint (W x D): 2,275 x 1,790 mm Total weight: 3,300 kg Coolant system: 250 l Pump output at 3.5 bar: 0.57 kW Flow rate at 3.5 / 1 bar: 15 / 65 l/min EQUIPMENT - Programmable tailstock - emco LM800 bar loader - Hollow clamping cylinder including draw tube - Machine light - Coolant system - Electronic handwheel - Cleaning gun/Multiflow - Pneumatically automatic parts catcher - Fully automatic machine door - Chip conveyor - Extensive tool set - Three-jaw chuck