Second-hand machinery for sale (2,359)

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 2009-0030, bending angle: 180 °, pipe diameter: 51 mm, pipe length: 4,500 mm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Primary application: Production of titanium tubes (2 inch). Dslrawju Tqpljdzsut Tube properties Dimensions: 2" (50.8 × 0.71 mm) Material: Titanium Ti - P99002 (welded tube, not for hydraulic applications) Bending ratio: 1.5 x D (1.0 x D technically feasible) Tube retraction length: 4500 mm Bending properties Operation: In one plane or as rotary draw bending of tubes and profiles. Bending angle: max. 180° + springback (with overbending of 20-30° due to springback of the titanium). Axes and control Bending axis CNC axis with bending angle: 0 - 180° + springback Accuracy: ±0.1° Bending speed:

Condition: new, Year of construction: 2021, Functionality: fully functional, No minimum price - guaranteed sale at the highest bid! Duelsuigpyorawdzst Use: Machine for the production and packaging of moist wipes such as hygiene wipes, cleaning wipes, disinfectant wipes. Production process: Folding and cutting of the wipes, moistening with one or more different liquids, Packaging process: Packaging the wet wipe in a 3- or 4-side sealed bag. TECHNICAL DETAILS Control: SIEMENS PLC and touch monitor Bag sizes: L(50-145) x W(50-110) mm Suitable films: laminated composite films, heat-sealable Suitable cloth material: dry nonwovens (airlaid, spunlaid) Maximum folds: 10 vertical, 4 horizontal Cloth size (unfolded): L(40-220) x W(30-240) mm Wet wipe grammage: 30-80 g/m² Roll diameter of non-woven fabric: max. 1,000 mm Roll diameter film: max. 350 mm Filling range liquid: 0-10 ml Accuracy: ± 0.5 ml Machine cycle rate in idle mode: 110 cycles/minute MACHINE DETAILS Power: 5 kW Voltage: 220V, single-phase Machine dimensions: 3,200 x 2,400 x 1,800 mm EQUIPMENT - Perforating tool - Dosing pump - Tear-notch tool - 2 character sets for cold and hot stamping (14 characters each) - Outfeed belt (1.2 m)

Condition: used, Functionality: fully functional, Year of construction: 2016, operating hours: 6,490 h, load capacity: 3,000 kg, lifting height: 4,900 mm, fuel type: gas, mast type: triplex, construction height: 2,350 mm, TECHNICAL DETAILS Djlrawetwpmgedzeut Load capacity: 3000 kg Load center of gravity: 500 Lifting height: 4900 mm Free lift: 1680 mm Length: 2700 mm Overall width: 1200 mm Overall height: 2350 mm Dead weight: 5170 kg Mast type: Triplex Fork length: 2400 mm Front tires type: Superelastic Front tires size: 28x9-15 non-marking Rear tires Type: Superelastic Rear tires Size: 6.50-10 non-marking

Year of construction: 2007, operating hours: 16,500 h, Condition: good (used), Functionality: fully functional, machine/vehicle number: NH631GF0405, LPP System (Linear Pallet Pool) automation system with 12 pallets only 16,500 spindle hours Dujlrjmfrtwjawdzet TECHNICAL DETAILS travel X / Y / Z: 1050 x 900 x 980 mm B-axis: 360 Control: MSX-701 Maps 3 speed: 8000 rpm tool holder: BT 50 number of tool places: 140 number of pallets: 12 table clamping surface: 630 x 630 mm table load: 1500 kg MACHINE DETAILS dimensions: 3,37 x 5,97 x 3,41 m weight: 19 t total power requirement: 64,7 kVA spindle hours: 16.500 Switch-on time: 127.000

Condition: ready for operation (used), Year of construction: 2000, operating hours: 48,743 h, Functionality: fully functional, machine/vehicle number: 28830006172, The machine is equipped with a chain magazine, pallet turntable and loading station. MAINTENANCE - Motor and pump for the hydraulic system replaced - Replaced the hoses - LI module replaced in the control cabinet - Drum on the Knoll system replaced TECHNICAL DETAILS X-travel: 600 mm Y-travel: 560 mm Z-travel: 560 mm B-axis: 360° Control: SINUMERIK 840D powerline Djlraetrdrnjwdzjut Infinitely variable speed: 0 - 8000 rpm Tool magazine: Chain magazine Number of tool positions: 90 / max. 450 kg Circular pallet storage: "compact" Rotation speed PSA axis: 3 rpm Positioning time 1 x 90°: 3 s Pallet change time: 6 s Number of storage locations: 4 Pallet size: 400 x 500 mm Loading height: 1100 mm Load with 1/2 loaded pallets: max. 350/600 kg/pallet Maximum workpiece weight with one-sided load: 350 kg Workpiece height: 770 mm Torque 100 % / 40 % ED: max. 124 / 191 Nm Motor power 100 % / 40 % ED: max. 13 / 20 kW Feed rate: 60,000 mm/min Rapid traverse: 60 m/min Set-up mode: 2,000 mm/min Feed force X,Z / Y: 9600 / 8000 N Position measuring system Resolution: 0.001 mm (position tolerance according to VDU DGQ 3441) MACHINE DETAILS Machine dimensions L x W x H: 4.5 x 2.4 x 2.4 m Installation area: 7 x 5 m Transport weight incl. cladding: 3,400 kg Transport dimensions DMC 60 H L x W x H: 2.9 x 2.0 x 2.4 m Connected load DMC 60: 80 kVA EQUIPMENT - Chip conveyor - Technical documents and installation plan available

Condition: excellent (used), Year of construction: 1972, Functionality: fully functional, Machine is ready for immediate use! TECHNICAL DETAILS Dslrawotyygcedzjut Number of thread rolls: 2 Thread rolling pressure: 24 t Shaft diameter: 69.85 mm Roller mounting length: 200 mm Rollable material: 5 - 75 mm Rollable pitch: 8 mm MACHINE DETAILS Weight: 3000 kg Dimension: 2120 x 900 x 1450 mm

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, machine/vehicle number: SI 2624, TECHNICAL DETAILS Construction volume: 250 x 250 x 325 mm (height incl. construction platform) Coating travel distance: 550 mm Dujlraetwbctswdzjt Travel speed: 40 - 500 mm/s Coating speed: process-dependent Resistance temperature sensor: PT-100 4-wire sensor Electronic temperature controller: with error curve linearization, sensor break detection Max. Heating power: 950 W at 230 V Operating temperature: 35 - 200 °C, depending on the type of metal powder Oxygen content in the process chamber during operation: < 0.1 % Max. Argon consumption: 3 m³ at the start of the build process Average argon consumption during build operation: approx. 0.6 m³/h Emission sound pressure level of the machine:

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, temperature: 630 °C, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Equipment type: Glass heating furnace for deep processing Application: Homogeneous heating and subsequent cooling of flat glass Djlrev U Rh Ajawdzeut Suitable glass: Clear float glass Temperature: 630 °C Power supply Supply voltage: 380 V Power supply: 3-phase, 5-wire AC Total installed power: 250 kW Total weight: 10 t System structure Components: Computer, control cabinet, power control cabinet, loading table, heating section, coating section, cooling section, unloading table Process flow 1. Glass loading: The flat glass is placed on the loading table and transported to the heating section. 2. Heating: In the heating section, the glass is evenly heated to high temperatures. 3. Coating: After heating, a special coating is applied in the coating section. 4. Annealing: In the cooling section, the glass is cooled evenly and slowly to reduce stress. 5. Glass unloading: The processed glass is transported to the unloading table and removed. EQUIPMENT - Computer - Control cabinet - Power control cabinet - Loading table - Heating section - Coating section - Cooling section - Unloading table

Condition: used, Functionality: fully functional, Year of construction: 2016, operating hours: 13,890 h, load capacity: 3,000 kg, lifting height: 4,450 mm, fuel type: diesel, mast type: standard, construction height: 3,100 mm, fuel: diesel, TECHNICAL DETAILS Load capacity: 3000kg Load center: 700 Lifting height: 4540mm Free lift: 620mm Length: 4500mm Overall width: 2150mm Overall height: 3100mm Dead weight: 7510kg Mast type: Standard Fork length: 1370mm Front tires type: Air Duelotwn Sborawdzot Front tires size: 27x10-12 Rear tires Type: Air Rear tires size: 27x10-12

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 010060, operating hours: 3,902 h, load capacity: 10,000 kg, lifting height: 5,300 mm, load center: 600 mm, mast type: standard, mast height: 3,536 mm, Equipment: sideshift, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Tires: 10.00-20 Dimensions Lifting height: 5,310 mm + forks Mast height: 3,630 mm Forks: 150 x 70 2,500 mm Load capacity and equipment Load capacity: 10,000 kg with load center of gravity 600 mm Mast: Standard Equipment: Standard, sideshift, fork positioner Drive system Engine: Diesel Perkins Duoljuzf Nxjrawdzet Operating hours: 3,902 h Transmission: ZF Machine weight Machine weight: 13,500 kg EQUIPMENT Sideshift Fork positioner

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, edge thickness (max.): 5 mm, product height (max.): 60 mm, product height (min.): 8 mm, product length (min.): 140 mm, product width (min.): 70 mm, TECHNICAL DETAILS Control panel: LCD display with keypad Edge thickness: 0.4 - 5 mm Workpiece height: 8 - 60 mm Minimum workpiece width: 70 mm Minimum workpiece length: 140 mm Milling and processing units Joining unit: With 2 counter-rotating diamond cutters Edge feed: For roll and strip material Glue application: With glue roller and glue unit Pre-cutting: From the roll Printing unit: Available Cutting unit: With pulling cut Flush and radius milling unit: Available Corner rounding unit: For front edges Unit adjustment: Manual Radius scraper unit: Available Surface scraper: Available Polishing unit: Available Feed & extraction Feed speed: 11 m/min Extraction connection: 120 mm + 2 x 80 mm MACHINE DETAILS Length x width x height: 4,550 x 1,550 x 1,100 mm Weight: approx. 990 kg EQUIPMENT - Joining unit with 2 counter-rotating diamond cutters - Edge feed for roll and strip material - Glue roller and glue unit - Pre-cutting from the roll - Printing unit - Cutting unit with pulling cutting cut - Flush and radius milling unit - Corner rounding unit for front edges - Manual unit adjustment - Radius scraper unit Dujlsvzygberawdzst - Surface scraper - Polishing unit - Extendable workpiece support

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 81066, travel distance X-axis: 305 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 330 mm, workpiece weight (max.): 60 kg, table width: 254 mm, table length: 254 mm, rotational speed (max.): 8,000 rpm, number of slots in tool magazine: 24, Equipment: documentation/manual, No reserve price - guaranteed sale at the highest bid! Djljvvktnjrawdzeut TECHNICAL DETAILS Work surface: 254 x 254 mm Table holes: M14 x 8 pieces Table indexing (4th axis): 0.001° Max. pallet load: 60 kg Max. tool loading capacity: 350 x 400 mm Travel paths X-axis: 305 mm Y-axis: 305 mm Z-axis: 330 mm B-axis: 0.001° - 360,000° Distance table top edge - spindle center: 60 - 365 mm Distance table center line - spindle head: 60 - 390 mm Spindle Spindle cone: NST No. 30 Speed: 80 - 8,000 rpm Drive: 1-stage C.O.G. Belt drive (no V-belt/no slippage) Cooling: IKZ Feed Rapid traverse (X, Y, Z axis): 40,000 mm/min B-axis feed: 8,000°/min (22.2 rpm) Milling feed (X, Y, Z): 0 - 15,000 mm/min Delay at this rapid traverse: 0.012 s Tools Tool storage: 24 Tool changing method: direct control (fixed holder location-AI2VW) Tool holder: MAS BT30 Max. tool dimensions (d x l): Ø 50 x 200 mm Max. tool weight: 2 kg Tool changing time: 1.2 s Chip-to-chip time: 3.0 s Motor Spindle motor (30 min./continuous operation): AC 3.7/2.2 kW Motor for tool changer: AC 400 V Motor for cooling system: AC 1,210 W Lubrication: Grease lubrication Mains connection: 8 kVA MACHINE DETAILS Machine height: 2,284 mm Floor area: 1,650 x 2,850 mm Machine weight: 4,090 kg Operating hours: No recording possible, used since 1999 in a mix of one to three shift operation No extraction is supplied and the system is currently prepared for a minimum quantity lubrication AM4000 from Knoll.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 28,384 h, Functionality: fully functional, machine/vehicle number: 15594, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, swivel angle A-axis (min.): -90 °, swivel angle A-axis (max.): 20 °, TECHNICAL DETAILS Control: Heidenhain iTNC 530 X-axis: 600 mm Y-axis: 450 mm Z-axis: 450 mm A-axis rotation range: +20° / -90° C-axis rotation range: 360° Rotary table diameter: 280 mm Spindle data Spindle mount: HSK A 63 Tool changer: 30 positions Feeds and speed Feed range: 1 - 30,000 mm/min Rapid traverse speed: 35 m/min MACHINE DETAILS Machine weight: approx. 6,500 kg Duelrasvytgfewdzst Control switch-on time: 64,299 h Machine switch-on time: 61,676 h Program run: 29,320 h Spindle hours: 28,384 h Drive hours: 37,893 hours

Condition: ready for operation (used), Year of construction: 1993, Functionality: fully functional, workpiece weight (max.): 1,000 kg, working width: 2,000 mm, plate height: 5 mm, TECHNICAL DETAILS Inlet and outlet roller transport system for material lengths: 2.5 – 14 m Inlet dimensions: 2,100 × 600 mm Machinable panel width: 2,000 mm Panel thickness: min. 5 mm Transport weight: max. 1,000 kg Blast unit Number of turbines: 6 C-380 turbines Turbine power: 11 kW per turbine Automatic adjustment: for the 4 outer turbines Dujljv U Raljrawdzet Throughput speed for BSa 2 12: 1 – 1.5 m/min Abrasive system Abrasive type: round, low-carbon lead shot or cut wire shot Abrasive hopper with screw conveyor: 2.2 kW Screw conveyor: available Bucket elevator with gear motor: 5.5 kW Belt monitoring sensor: Available Cleaning unit Brush system with air blast system: Available Automatic brush height adjustment: Available EQUIPMENT - Brush system with air blast system - Automatic brush height adjustment - Automatic adjustment of the outer turbines - Screw conveyor - Bucket elevator with belt monitoring

Condition: used, Functionality: fully functional, Year of construction: 2013, operating hours: 20,410 h, load capacity: 5,000 kg, lifting height: 4,050 mm, fuel type: diesel, mast type: standard, construction height: 2,370 mm, fuel: diesel, TECHNICAL DETAILS Length: 3050 mm width: 1450 mm Forklift height: 2370 mm Mast height: 2730 mm Lifting height: 4050 mm Fork carriage width: 1350 mm Load capacity: 5000 kg / LSP: 600 mm Mast: Standard; sideshift, Fork positioner: 400 / 1300 mm Tires: SE; front 3.00-15; SE rear 2.50-15 Delrawdstwn Ivjzsut MACHINE DETAILS Engine: Diesel VW Weight: 7250 kg EQUIPMENT Cabin Heating

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 0-201-08-7963, TECHNICAL DETAILS Traversing speed in X-direction: Max. 60 m/min. Traversing speed in Y-direction: Max. 60 m/min. Travel speed in Z direction: Max. 30 m/min. Workpiece length X-direction: max. 3440 mm with single loading Workpiece length Y-direction: max. 3710 mm for milling with tool diameter 25 mm Workpiece thickness: max. 300 mm incl. clamping device Z-axis for main spindle travel: 800 mm & second Z-axis for drilling head Vacuum pumps: 4 pcs. Clamping table grid Raster groove exit tables: 2 pcs. Duelrawott R E Nedzst Working height of grid table: 850 mm Grid dimension: 30 mm Groove width: 7 mm Groove depth: 7 mm Distance between vacuum holes: 120 mm EQUIPMENT 5-axis main spindle 15 KW " DRIVE 5+" with vibration sensor Unit interface DRIVE 5+ Disk changer 18-FACH Drilling head 17 spindles horizontal + saw 0/90° Pick-up space for saw blade 350 mm Climbing conveyor Chip and offcut disposal Power Control PC 85 with PLC control Software: Windows XP operating system, WOODWOP-PAKET AV-PC Feeding portal HOMAG Profi TBA370/40/16 Turning and alignment station

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, workpiece length (max.): 6,175 mm, workpiece width (max.): 1,550 mm, workpiece height (max.): 300 mm, spindle speed (max.): 24,000 rpm, Provision: FCA - loading equipment must be provided by the buyer - can be borrowed from Homag TECHNICAL DETAILS Workpiece lengths: max. 6,000 mm (single), max. 2,375 mm (pendulum) Workpiece lengths for workpiece Ø 25 mm: max. 6,175 mm (single), max. 2,550 mm (pendulum) Front workpiece width: max. 1,150 mm (all units) Workpiece width at the front for routing with 25 mm diameter: max. 1,220 mm Front workpiece width for gluing: max. 1,220 mm Workpiece width at the rear: max. 1,400 mm (all units) Workpiece width at the rear for routing with 25 mm diameter: max. 1,550 mm Rear workpiece width for gluing: max. 1,475 mm Rear workpiece width with standard flush trimming and gluing: max. 1,500 mm Workpiece thickness: max. 300 mm including clamping device (router) Workpiece thickness with standard clamp: max. 60 mm Workpiece thickness: min. 12 mm (chamfer milling) Workpiece thickness: min. 16 mm (radius milling or min. 2 x radius + 10 mm) Spindle and tool changer Main spindle: 15 kW, HSK F63 Spindle speed: 24,000 rpm C-axis: with unit interface Plate changer: 18-position, D = 130 mm Tool weight: max. 6 kg Tool weight incl. holder for units: max. 10 kg Drilling head Spindles: 30 (V20 / H10 / S360° "MPU") Duslrou Sz Nysawdzst Drill head motor: 2.7 kW, frequency-controlled Speed: max. 7,500 1/min Vertical spindles: 20, high-speed, arranged in a U-shape (3 rows with 11, 3 and 6 spindles) Horizontal spindles: 10, arranged in pairs (4 pairs with 32 mm pitch, 1 pair 320 mm apart) Sawing and routing Grooving and cutting saw: saw blade Ø max. 200 mm Attachment milling spindle for drilling head: 6 kW (for S6 operation) FLEX-5 FLEX-5 sawing, milling and drilling unit: for tool changer C-axis extension for FLEX-5 unit: Coupling element for C-axis Gluing unit POWER EDGE gluing unit: For gluing edge material to straight workpiece edges Edge height: max. 105 mm (gluing unit BAZ222/322) Workpiece thickness during edging: max. 100 mm Further units Flush trimming unit: for tool changer Combined flush trimming and scraper unit: WD 100 mm Combination snipping and corner rounding unit: traced Lock case trimming unit: 2 spindles, D = 16/20 mm EQUIPMENT - with gluing unit - with FLEX-5 unit - Chip conveyor belt: for B200/52-72 - LED position indicator: Console 1,300-1,600 mm - LED position indicator for precise workpiece handling - Extended workpiece processing options thanks to flexible unit system - without tools The technical data and descriptions are taken from a copy of the order confirmation at the time. Data is for information only and is not binding.

Condition: good (used), Year of construction: 2018, Functionality: fully functional, working height: 1,115 mm, workpiece weight (max.): 400 kg, worktable width: 1,200 mm, worktable length: 750 mm, Set of 5 assembly tables! New price is €160,000 No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Dueljvwcidorawdzjt per table Dimensions (WxDxH): 1,200 x 750 x 2,478 mm Working height: 815 - 1,115 mm Material: aluminum profiles Flexible feet: 4 pieces Fixation: 4 aluminum plates for fixing the assistance system in height and depth Worktop: 1 melamine-coated chipboard with PVC edge banding, 1,200 x 600 x 25 mm, attached to mounting brackets Lifting columns: electrically height-adjustable Load: max. 400 kg Lift: 300 mm Control: incl. hand switch and control EQUIPMENT per table - Ulixes Assistant A600 work assistance system - Ulixes Assistant A500 work assistance system

Year of construction: 2006, operating hours: 109,000 h, Condition: excellent (used), Functionality: fully functional, Horizontal machining center with 6-fold pallet station Machine has run only in aluminum - new spindle in 2020 TECHNICAL DETAILS X-axis: 700 mm Y-axis: 800 mm Z-axis: 800 mm NC rotary table, B-axis 0.001 spindle speed: max. 18000 rpm control: SIEMENS 840D Shopmill clamping area: 500 x 500 mm table load: max. 800 kg workpiece diameter: max. 800mm workpiece height: max. 900mm tool holder: HSK 63 tool changer: 180 positions spindle power: max. 30 kW torque: 5.000 Nm Holding torque: 5.000 Nm rapid traverse/feed rate: 60 m/min Feed force in X/Y/Z: 10 kN EQUIPMENT - chip conveyor - Pallet station 6 pallets - Automatic tool measurement 3 D wireless probe M+H - Coolant system with paper belt filter - IKZ system with belt filter, 40 bar Duolremfrgnjawdzjt 30 tool pockets in the magazine are defective.

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, measuring range X-axis: 2,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,500 mm, TECHNICAL DETAILS Effective measuring range: approx. 2,200 x 1,200 x 1,500 mm Measurement uncertainty: from 25 + 15 x L/1,000 µm Probe: Zeiss RDS with Renishaw TP20 Drive & Control Dolrev Naw Asawdzout Drive technology: DC motors with friction wheel Control: Zeiss C99 Operation: Handset with controller Machine is sold without a PC and without software

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2004, operating hours: 14,911 h, load capacity: 8,000 kg, lifting height: 4,000 mm, fuel type: electric, mast type: standard, construction height: 4,000 mm, fuel: electricity, TECHNICAL DETAILS Lifting height: 4,000 mm Fork carriage width: 2,000 mm Load capacity: 8,000 kg Load center of gravity: 600 mm Fork positioner: 425 / 1 960 mm Forks: 150 x 65 x 1 400 mm Motor: Electric Mast: Standard Battery: 80 V; 1 550 Ah; 2015 MACHINE DETAILS Tires: SE 8.25-15 Dolrastwc Hmswdzeut Dimensions: 4,000 x 2,050 x 2,860 mm Mast height: 3,150 mm Weight: 12,174 kg EQUIPMENT - Sideshift - Cabin - Heater

Year of construction: 1998, Condition: excellent (used), Functionality: fully functional, TECHNICAL DETAILS x-way: 720 mm y-way: 630 mm z-way: 630 mm control: OKUMA OSP 7000 pallet size: 500 x 500 mm spindle speed: 10 - 5000 rpm tool holder: 10-fold pallet station tool holder: MAS BT 50 tool places: 200 pieces Dolrask R Tp Ujwdzout EQUIPMENT - tool breakage probe - Renishaw probe - High pressure coolant system - Coolant mist extraction system - Spindle load and torque monitoring - Thread milling - Chip conveyor The scope of delivery is not shown in the pictures but in the description text.

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: A 0204/6707, workpiece height (max.): 40 mm, workpiece length (max.): 2,500 mm, workpiece width (max.): 600 mm, TECHNICAL DETAILS Workpiece length: 120 - 2,500 mm Workpiece width: 50 - 600 mm Workpiece thickness: 12 - 40 mm Control: KOCH Numeric with Windows 2000 Sawing station Sawing station part length: up to 560 mm Saw guide: in measuring rail Measuring stop: tear-free cuts Thickness measurement: bar encoder Separate Z-adjustment: for manual and machine operation Frequency converter: for saw motor Saw blade take-off: available Horizontal drilling station Djlrawdsvcm Uuszout Drilling spindles: 5 spindles per side Dowel tool: 1 x type 3B for dowels 10 x 40 mm Dowel spacing: 7-14 mm Electronic glue monitoring: KOCH ELC Vertical drilling station Empty station: between horizontal and vertical processing Top support: 1 x with 2 guide tracks Vertical drilling support: 1 piece, NC in X + 2 x Y + Z Vertical drilling support: 2 separately adjustable drilling spindles in Y Drilling head: 28 drilling spindles (14 spindles each for X and Y) Suction and clamping shoes: 2 pieces Horizontal drilling spindles: 2 pieces for longitudinal drilling on the front and rear side Grooving head: 0°/90° swiveling Carrier: with linear guides for center support Workpiece center support: (automatically lowerable) with NC adjustment in X Workpiece support Workpiece stop: for processing strips Workpiece width: max. 140 mm Clamping of strips: via back gauge MACHINE DETAILS Height: 2,300 mm Length: 5,600 mm Width: 6,000 mm Basic equipment - NC width adjustment - 1 support with NC axis in Y on each side - 1 horizontal drilling station with 1 drilling spindle per side - 1 doweling tool with ELC glue monitoring per side - 1 vibratory conveyor with control mirror per side - Central axis with 1:1 glue pump - 2 NC height adjusters (Z-axis) - Belt infeed with NC-adjustable belt pulley - Workpiece transport with toothed belt and spring-loaded cams - Central lubrication - Telephone modem for remote diagnosis

Condition: good (used), Year of construction: 2007, Functionality: fully functional, turning diameter over cross slide: 762 mm, turning length: 864 mm, turning diameter: 432 mm, spindle bore: 76 mm, spindle speed (max.): 3,400 rpm, spindle speed (min.): 30 rpm, TECHNICAL DETAILS Duolrsul Uvhsawdzot Turning diameter over cross slide: 762 mm Turning length: 864 mm Turning diameter: 432 mm Tool turret: 12-position, VDI40 Spindle bore: 76 mm Spindle speed: max. 3,400 rpm Spindle speed: min. 30 rpm MACHINE DETAILS Total height: 1,900 mm Total length: 2,200 mm Total width: 3,300 mm EQUIPMENT Tool probe Chip conveyor

Condition: excellent (used), Year of construction: 1997, Functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 1,000 mm, controller model: Dea Standardsteuerung B3, TECHNICAL DETAILS X-axis travel: 1,200 mm Y-axis travel: 2,000 mm Duelrajv Nanuswdzet Z-axis travel: 1,000 mm Length measurement uncertainty: E = [2.7 + 5L/1,000] µm (ISO 10360) Control, probe & software Control: DEA B3 Probe system: Renishaw PH10MQ with TP200 Software: PCDMIS CAD++ (V2019) Computer Manufacturer: Hewlett Packard Elite 8000 Operating system: Windows 10 Pro Monitors: 2x TFT