Second-hand machinery for sale (2,359)

Condition: new, Year of construction: 2018, Functionality: fully functional, conveying length: 158,000 mm, construction width: 6,000 mm, product height (max.): 450 mm, product height (min.): 50 mm, product length (max.): 800 mm, product length (min.): 300 mm, product width (max.): 600 mm, product width (min.): 200 mm, System only run in test mode No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS System: based on Interroll Crossbelt Sorter Horizontal ST 6160 – 6189 Transport length: 158 m Width: 6 m Infeed throughput: 2 x 2,500 transport units/hour Gross transport capacity: 7,270 carts/h Net transport capacity: 6,000 parts/h (with 3% double-shell and 85% efficiency) Transport speed: approx. 1.5 m/s Conveyed goods Suitable for: piece goods and tray transport / boxes and polybags Minimum dimensions (L x W x H): 300 x 200 x 50 mm Maximum dimensions (L x W x H): 800 x 600 x 450 mm Weight: 0.2 - 35 kg Carriage dimensions (L x W): 560 x 800 mm Carriage pitch: 726 mm Position of goods on sorter carriage: crosswise/longitudinally Height of top edge of sorter carriage: 800 mm above platform Sorter Curve radius: 3,000 mm Drive Drive type: bevel gear motor with frequency converter (SEW with Movifit) Number of drive motors: 3 Motor power: 4 x 2.2 kW Voltage: 400 V Cross belt carriage drive: Mechanical Infeeds Number of infeed lines: 2 Components per infeed line: 2 transfer belts (0.75 kW) / 4 takeover belts (0.75 kW) / 1 belt merge (1.1 kW) End points Number of end points: 20 end points (12 end points available) Width of end points on the sorter: 2,250 to 2,400 mm Flaps per end point: 4 pieces Dslitsvt Am Ijdp Sout MACHINE DETAILS Sorter height: 800 mm (top cross belt to bottom support foot) above platform/steel construction Temperature range: +5 °C to +45 °C Maximum humidity: 90% (non-condensing) Noise level: max. 72 dB(A) Compressed air supply Consumption: 10 m³/h at 6 bar Note: Compressor for compressed air supply not included in delivery EQUIPMENT - 4 x Sorter_Curve_R3000 - 4 x Sorter_Route_1000 - 2 x Sorter_Route_4813 - 2 x Sorter_Route_5290 - 20 x Sorter_Route_5800 - 2 x Sorter_Feed_1830 - 2 x Sorter_Feed_5200 - 12 x sorter_spiral slide - 12 x sorter_roller belts - 12 x sorter_sorting tables - no control included

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Bar processing center with 2 angle heads, tools and accessories HIGHLIGHTS - Adjustment of the rotary angle head for 0° / 90° / 180° / 270° - Processing of profiles from the front, rear and front with 2 tools - Power-Torque milling spindle - increased torque in lower speed ranges TECHNICAL DETAILS Travel X / Y / Z: 3850 / 350 / 280 mm Max. Machining length with/without end face machining: 3650 / 3750 mm Control: E 550 Spindle speed: infinitely variable up to 21,000 rpm Cutter diameter: up to 63 mm Disk cutter diameter: up to 200 mm Duelitdetrxu Tjp Sst Spindle holder: HSK F 63 Spindle drive: 6 kW Tool change: automatic, 4 places plus angle head Rapid traverse X / Y / Z: 50 / 30 / 30 m/min MACHINE DETAILS Dimensions: 4600 x 3230 x 2420 mm Weight: 1.7 tons EQUIPMENT - Tool holder: 3 pieces - Tool measuring device - Drill chuck - Rotation angle head - Safety device light barrier - Automatic clamp displacement - Program detects collision

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 66586, grinding length: 650 mm, grinding width: 323 mm, grinding height: 450 mm, table length: 600 mm, table load: 420 kg, table width: 400 mm, TECHNICAL DETAILS X-axis: 600 mm Z-axis: 450 mm Y-axis: 323 mm Magnetic clamping plate Type: Electro-permanent magnetic clamping plate Size: 600 x 400 mm Table load: 420 kg Area of application: High-precision machining Features: Electronic demagnetization and holding force coding Pole pitch: 18 mm (transverse parallel pole) Air hole set: 2 x 3 holes, central locking device Dressing system Type: Hydraulic straight dresser Automatic: Automatic dressing with compensation of the dressing amount, grinding wheel wear, intermediate dressing and grinding head reset MACHINE DETAILS Duolitjvw Su Aedp Set Installation dimensions: 4,350 x 3,700 x 2,300 mm Machine dimensions: 3,425 x 2,263 mm Weight: 3,200 kg Connection power: 9.5 kVA EQUIPMENT - Microcomputer control group for magnetic clamping plate - Electro-permanent magnetic clamping plate (600 x 400 mm) with demagnetization and holding force coding - Belt filter machine SBF 30 Complete with 150 l tank, pump, supply lines, fittings and 1 roll of filter fleece - Replacement disk flange (Ø 127 mm). - Automatic dressing with hydraulic dresser

Year of construction: 2019, operating hours: 5,500 h, Condition: excellent (used), Functionality: fully functional, Plant to be picked up by 05/26-23 - one bid obligates timely dismantling & pickup. TECHNICAL DETAILS: Max. Workpiece size: 1050 x 820 x 300 mm Max. workpiece weight: 1.000 kg Duslitdok H D Haep Sst Travel: 600 x 400 mm Wire diameter: 0,1 - 0,3 mm Machine weight: 3.000 Kg Control: Fanuc 31i -WB installation dimensions: 2.440 x 2.680 mm Machine hours: 5.500 Betr.

Condition: good (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 511527, turning length: 400 mm, turning diameter: 200 mm, controller manufacturer: Index, controller model: C200-4, number of slots in tool magazine: 28, TECHNICAL DETAILS Turning diameter: 200 mm turning length: 400 mm Control: C 200-4 Index Main spindle: Usable bar diameter: 60 mm Spindle diameter in front bearing: 100 mm Dolitdst Dm Nqjp Seut Tool turret: Number of turrets: 2 Turret (x-fold): 2 x 14 pos MACHINE DETAILS Weight machine + cabinet: 4280 + 390 kg Operating voltage: 400 V, 50 Hz EQUIPMENT High-pressure cooling with conditioning system Various tool holders and accessories (see pictures) WITHOUT TOOL CABINET AND WITHOUT TOOL BENCH.

Condition: ready for operation (used), Functionality: fully functional, grinding length: 630 mm, grinding width: 250 mm, grinding height: 300 mm, grinding wheel width: 46 mm, disc diameter: 220 mm, No reserve price - guaranteed knockdown to the highest bidder at the end of the auction! TECHNICAL DETAILS Sanding length: 630 mm sanding width: 250 mm Workpiece height: 300 mm Table size: 2050 x 340 mm Magnetic plate size: 600 x 250 mm Table feed range: 0.005 - 0.045 mm/stroke Grinding spindle infeed: 0.001 - 0.045 mm/stroke Grinding wheel dimensions: Ø 220 x 46 mm MACHINE DETAILS Operating voltage: 3 x 380 V, 50 Hz Rated current: 20 A Control voltage: 220 V Magnetic disk voltage: 110 V Duolitotzluyodp Set

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 1159547, travel distance X-axis: 3,683 mm, travel distance Y-axis: 2,159 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 8,100 rpm, number of slots in tool magazine: 20, Machining center with extended Z-axis and magazine size as well as steel table and other additional equipment No reserve price - guaranteed sale at the highest bid! Bidding obliges you to pick up the machine on time by January 31, 2025! TECHNICAL DETAILS X-axis: 3,683 mm Y-axis: 2,159 mm Z-axis: 610 mm - extended Distance spindle nose - machine table (max.): 343 mm Spindle nose to table (min.): 64 mm Spindle Max. rated power: 11.2 kW Max. speed: 8,100 rpm Max. torque: 65.0 Nm at 1,500 rpm Drive system: Direct Speed, Belt Drive Cone: CT or BT 40 Table Length: 3,708 mm Width: 1,829 mm Thickness: 25 mm Material: Steel - extended! Max. load capacity on table (evenly distributed): 2,722 kg Duelitovpf Imsdp Sst Space between columns: 2,184 mm Hole pitch: M12 thread Feed rates Max. feed for cutting: 20.3 m/min Rapid traverse X: 20.3 m/min Rapid traverse Y: 53.3 m/min Rapid traverse Z: 27.9 m/min Axis drives Max. thrust force X: 11,210 N Max. thrust force Y: 4,537 N Max. thrust force Z: 9,119 N Tool changer Type: Carousel Load capacity: 20 tools - extended Max. tool diameter (full): 89 mm Max. tool weight: 5.4 kg MACHINE DETAILS Coolant tank capacity: 360 l Compressed air connection: 113 l/min at 6.9 bar Min. air pressure: 5.5 bar Dimensions - Shipping Pallet: 575 cm x 348 cm x 295 cm Export box: 575 cm x 348 cm x 303 cm Weight: 10,887 kg EQUIPMENT - WIPS-R_GR-712 Intuitive wireless measuring probe system, Renishaw, including macros - CS-GR_GR-712 Cooling system with 360 liter coolant tank and 0.6 kV pump - HSM_GR-712 High-speed machining - C_GR-712 Portable control panel RTAP-3_GR-712 Cable drilling

Condition: reconditioned (used), Year of construction: 1986, Functionality: fully functional, machine/vehicle number: 12473, travel distance X-axis: 2,995 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 795 mm, spindle speed (max.): 2,000 rpm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 2,995 mm Y-axis travel: 800 mm Z-axis travel: 795 mm Table size: 2,995 × 800 mm Number of T-slots: 5 Coolant tank: 300 L Spindle Tool holder: SK50 Spindle speed: max. 2,000 rpm Feed Max. feed rate: 5,000 mm/min Max. rapid traverse: 6,000 mm/min MACHINE DETAILS Dolitdjv R Dxmjp Sjut Installation dimensions: 8,000 × 3,500 × 3,000 mm EQUIPMENT - CNC control retrofitted by NCT - Horizontal and vertical machining possible

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 350 mm, workpiece weight (max.): 280 kg, TECHNICAL DETAILS X-axis: 400 mm Y-axis: 500 mm Z-axis: 350 mm Workpiece weight: max. 280 kg Table data size: 855 x 680 mm Control software: U-Soft Solid ultra Control: Dr. Schneider Duelitdpjvw Skwe Sot MACHINE DETAILS Total weight: 400 kg Dimensions (L x D x H): 1,100 x 1,100 x 2,000 mm

Condition: good (used), Year of construction: 2010, machine/vehicle number: 16179_30, Consumer powder packaging - gas-tight block bottom bag packaging line including: Rovema SBS 250 bag machine with labeler and sealing strip supply - output 2450 bags/hour (in 725 bag format). Equipped with a controlled atmosphere system (N2). Bag dimensions 135x65 (roll width 425). Dslitdsu U Nbijp Ssut

Condition: ready for operation (used), Year of construction: 1989, Functionality: fully functional, machine/vehicle number: 557, grinding length: 1,200 mm, grinding width: 450 mm, grinding height: 450 mm, grinding wheel diameter: 400 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Grinding area: approx. 450 x 1,200 mm Magnetic plate dimensions: approx. 420 x 1,200 mm Grinding height: 450 mm Component height: 370 mm Grinding wheel Diameter: up to max. 400 mm Bore: 127 mm Width: max. 100 mm Drive Spindle power: 17 kW (according to type plate) Duolitdpjvr Tm No Set Additional: incl. cooling water system A 10-ton hall crane can be used for loading.

Condition: good (used), Year of construction: 1999, Functionality: fully functional, travel distance X-axis: 1,200 mm, controller manufacturer: Heidenhain TNC 426, rotational speed (max.): 16,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 30, TECHNICAL DETAILS X-axis: 1,200 mm Y-axis: 900 mm Z-axis: 500 mm Djlistzlpkstdp Sjut Speed range: 16,000 rpm Control: Heidenhain TNC 426 MACHINE DETAILS Tool holder: SK 40 Tool places: 30 Table size: 1,400 x 900 mm Space requirement (LxWxH): 4.5 x 5.5 m Machine weight: 12,000 kg EQUIPMENT Chip conveyor Internal cooling (IKZ) Coolant system Coolant tank 300 L

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, machine/vehicle number: 5820387, punching force: 30 t, sheet thickness steel (max.): 8 mm, working range: 3,000 mm, travel distance X-axis: 2,500 mm, CNC punching machine with fully automatic loading system TECHNICAL DETAILS Control: CNC AMADAN 04 P-C Automation & Safety Loading system: LKI L III 250 automatic loader Unloading system: PR III automatic unloader Sorting: Automatic part sorting on pallets possible Noise protection: Noise protection hood Safety equipment: SICK photoelectric sensors, original safety fences Processing capacity Punching force: 30 t Max. material thickness (steel): 8 mm Working area: 3,000 mm X-axis travel: 2,500 mm Table system Table type: Brush table for quiet operation and scratch-free processing Repositioning: Automatic sheet repositioning Tool lubrication: Air Blow automatic lubrication Punching Pneumatic punches: 2 pieces MACHINE DETAILS Power supply: Three-phase Overall length: 15,000 mm Total width: 5,000 mm Total height: 2,000 mm Punching machine weight: 16 t Loader weight: 2.3 t EQUIPMENT - Automatic loader LKI L III 250, built in 2011 - Automatic unloader PR III - Noise protection hood - SICK photoelectric sensors - Original safety fences - Brush table - Automatic sheet repositioning - Air blow lubrication - Two pneumatic punches Further technical details according to the manufacturer - without guarantee Ram stroke: 31.9 mm Max. hole diameter: 114.3 mm Punching frequency (X/Y direction) Stroke length: 8.0 mm – Pitch: 25.4 mm – Stroke frequency: 300 / 375 strokes/min Stroke length: 4.5 mm – Pitch: 25.4 mm – Stroke rate: 375 / 375 strokes/min Stroke length: 4.5 mm – Pitch: 2.0 mm – Stroke rate: 600 / 600 strokes/min Tool turret Tool type: Amada Thick Turret Turret speed: 25 rpm Turret capacity: 58 stations (4 of which are auto-indexable) Accuracies Duelitdjwc S R Hsp Set Punching accuracy: ± 0.10 mm Positioning accuracy: ± 0.025 mm Repeat accuracy: ± 0.025 mm

Condition: good (used), Year of construction: 2002, Functionality: fully functional, spindle speed (max.): 8,000 rpm, No reserve price - guaranteed sale to the highest bidder! Dslov R Direitdp Sout Spindle speed: 8000 rpm Specifications according to manufacturer - without guarantee: X-axis: 610 mm Y-axis: 560 mm Z-axis: 510 mm Max. workpiece weight: 300 kg Tool positions: 20 Spindle taper: CAT 40

Condition: excellent (used), Year of construction: 2019, operating hours: 11,832 h, Functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 38, swivel angle A-axis (min.): -139 °, swivel angle A-axis (max.): 91 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Linear acceleration X-Y-Z: 6 m/s² Linear feed force X-Y-Z: 7,000 N Max. jaw width: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 pieces Chip-to-chip time: approx. 6 s Tool length: max. 300 mm Tool diameter with adjacent position occupied: Ø 80 mm Tool diameter without adjacent position occupied: Ø 125 mm Tool weight: max. 8 kg Magazine load: max. 152 kg Swivel rotary table Clamping surface: Ø 650 x 540 mm Swivel range: +91° / -139° Drive type C-axis: worm Speed of swivel axis A: 25 rpm Speed of rotary axis C: 30 rpm Table load one-sided drive: 600 kg Accuracy according to ISO 230-2 Deviation (A in X-Y-Z axis): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Coolant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Mains connection (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filter: police filter, paper belt filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: minimum quantity grease lubrication MACHINE DETAILS Control switch-on time: 20,178 h Machine switch-on time: 19,094 h Spindle time: 11,832 h Weight: approx. 9.5 t Mains connection Voltage: 400 V / 50/60 Hz Dujlitjvw Sdqedp Sot Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip flushing gun - Emulsion mist extraction - Scraper belt conveyor - Blow-off device - Blowing air through the center of the spindle - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical heat compensation from Heidenhain. - Electrical manual control module from Heidenhain.

Condition: excellent (used), Year of construction: 2015, operating hours: 6,609 h, Functionality: fully functional, machine/vehicle number: SL600Q-A0256, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 320 mm, workpiece height (max.): 340 mm, workpiece width (max.): 800 mm, workpiece length (max.): 570 mm, TECHNICAL DETAILS Workpiece dimensions flushing: 800 mm x 570 mm x 340 mm Workpiece dimensions submerged: 800 mm x 570 mm x 280 mm Maximum workpiece weight: 1,000 kg Work table dimensions: 1,050 mm x 850 mm X-axis: 600 mm Y-axis: 400 mm Z-axis: 320 mm UV-axis: 120 mm x 120 mm Maximum cone angle: ±25° (for workpiece thickness 130 mm) Wire diameter: 0.1 - 0.3 mm Maximum wire speed: 420 mm/s Duslitdpovw Ag Aj Set Wire tension: 3 - 23 N Weight of wire spool: 8 kg Processing method: flushing, submerged Table height: 995 mm Dielectric tank External dimensions (W x D): 825 mm x 2,400 mm Weight (empty): 500 kg Tank capacity: 850 l Filtration method: 3 replaceable paper filters Ion exchanger: Ion exchange resin (18 liter type) MACHINE DETAILS Without accessories: 2,635 mm x 2,865 mm x 2,300 mm With accessories: 3,920 mm x 4,215 mm Machine weight: 4,500 kg Transport dimensions: 2,635 x 2,865 x 2,200 mm Operating hours: 67,181 h Cutting time: 6,609 h Air pressure: 0.5 MPa Air flow: 30 NL/min Power consumption: 13 kVA EQUIPMENT - Wire chopper (L-Cut) - Taper Flex 3D Optional extension: Solidworks and DemaCut can be purchased for an additional EUR 5,000.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 4,197 h, Functionality: fully functional, saw blade diameter: 850 mm, saw blade bore: 10 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Dolitdsv R Epgsp Sout Saw blade diameter (without loader): 80 – 850 mm Saw blade diameter (with loader): 250 – 450 mm Bore diameter (from): 10 mm Saw blade magazine: up to 40 pieces Control and Software Control: Industrial PC with Siemens standard PLC Software: For all tooth shapes, including special profiles Grinding process sequence Step 1: After starting, the vacuum gripper removes the top saw blade from magazine 1. It is transferred to the Woodtronic NC4 and the cover is opened. Step 2: The loader returns. The Woodtronic NC4 is closed and the grinding program starts. The loader removes the spacer ring from magazine 1 and transfers it to magazine 2. Waiting position. Step 3: After the grinding process and the Woodtronic is opened, the loader removes the ground saw blade and transfers it to magazine 2. Process repetition Steps 1 to 3 are repeated until the grinding process is complete. Pre-programming possible: Grinding continues uninterrupted, even while programming the next magazine. The Woodtronic NC4 can be pre-programmed during the day and grinds automatically at night. Measurable with WALTER Saw Check: Rake angles, clearance angles, diameter, number of teeth Tooth shape: manual entry required EQUIPMENT - Automatic loader - Walter Saw Check - Measuring device for carbide circular saw blades

Condition: good (used), Year of construction: 1985, Functionality: fully functional, machine/vehicle number: 5019-03, center height: 325 mm, grinding length: 1,600 mm, grinding wheel diameter: 450 mm, spindle speed (max.): 2,770 rpm, grinding spindle speed: 650 rpm, pivoting range: 90 °, Machine with comprehensive accessories! Condition: Very good, works with very high precision - general overhaul in 2001 No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Sinumerik 840D Center distance: 1,600 mm Center height: 325 mm Longitudinal slide Table speed max.: 0.06 to 10,000 mm/min Automatic travel: 0.001 to 1,750 mm Max. inclination of the table: 8° Cross slide Swivel range: ± 45° Grinding depth (plunge grinding): 200 mm Travel speed: 0.06 to 10,000 mm/min Grinding headstock Type: S50-12 Grinding wheel dimensions: 450 mm x 80 mm x 203 mm Drive: 7.5 kW Speeds: 1,240 to 2,770 rpm (8 Steps) Swivel range: 0 to 210° Workpiece headstock Swivel range: 0 to 90° Speed range: 15 to 650 rpm (freely programmable) Drive power: 2.2 kW MACHINE DETAILS Total connected load: 22 kW Machine weight: 7 t Dusliovrzu Istdp Set EQUIPMENT - Internal grinding device - Full enclosure - Extraction system - Cooling unit Submitting a bid obliges you to pick up the machine on time by March 1st, 2025!

Condition: good (used), Year of construction: 2008, Functionality: fully functional, grinding width: 1,300 mm, grinding height: 80 mm, grinding belt length: 3,250 mm, grinding belt width: 1,350 mm, TECHNICAL DETAILS Width: max. 1,300 mm Thickness: 3 - 30 mm Function: sanding and finishing of solid wood Feed: 80 m/min Work table and transport Work table: fixed height Vacuum carpet: yes Drive carpet: yes Working level: yes Height: fixed for processing in line Number of working units: 8 Operating unit 1 Unit: roller Roller diameter: 250 mm Operating unit 2 Unit: roller, rubber Roller diameter: 400 mm Sanding belt width: 1350 mm Sanding belt length: 3250 mm Operating unit 3 Unit: roller, rubber Roller diameter: 400 mm Operating unit 4 Unit: tampon Tampon: vertical Operating unit 5 Unit: tampon Tampon: vertical Operating unit 6 Unit: brush Position: top Operating unit 7 Unit: blowing devices Operating unit 8 Deliov Ebb Iotdp Seut Unit: blowing devices CE marking: yes Total installed power: 260 kW

Condition: good (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 662172, feed length X-axis: 600 mm, feed length Y-axis: 450 mm, feed length Z-axis: 450 mm, spindle speed (max.): 6,300 rpm, number of slots in tool magazine: 30, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm Control type: CNC 532 Feed range / rapid traverse Feed in X, Y, and Z axes: 1 - 6,000 mm/min Rapid traverse in X and Z axes: 6 m/min Rapid traverse in Y axis: 6 m/min Duolitjv Ryamsdp Sst 2-axis NC table Clamping surface: Ø 320 mm Center bore: Ø 30 H7 mm Number/spacing of T-slots: 5/63-14 H7 mm Rapid traverse for swiveling/rotating: 16/40 rpm Swivel range: ± 105° Rotation range: n x 360° Max. table load: 100 kg Main Drive Three-phase motor power: 10.0 kW Switching speeds: 2 Work spindles & tools Tool holder: SK 40 Number of tools: 30 (universal) Speed range: continuously variable from 20 - 6,300 rpm Vertical quill stroke: 80 mm MACHINE DETAILS Machine weight: approx. 3,600 kg Machine start-up time: 1193:27:30 Spindle time: 193:02:52 EQUIPMENT - Universal tool changer - Direct position measuring system - Automatic vertical milling head activation - Internal coolant supply & cooling unit - Chip conveyor - Tool breakage detection - Infrared measuring probe

Condition: good (used), Year of construction: 2005, Functionality: fully functional, travel distance X-axis: 4,250 mm, travel distance Y-axis: 1,500 mm, number of spindles: 25, number of slots in tool magazine: 26, TECHNICAL DETAILS Type of machining: drilling, milling Working areas and axes Working area X-axis: 4,250 mm Working area Y-axis: 1,500 mm Stroke X-axis: 5,050 mm Stroke Y-axis: 2,150 mm Number of working areas: 2, vacuum console supports Working level with rods with suction elements: yes Number of rods with suction elements: 10 Movement speed Movement speed X-axis: 80 m/min Movement speed Y-axis: 60 m/min Movement speed Z-axis: 20 m/min Spindles and tool positions Main spindle power: 11 kW Number of controlled axes: 4 axes Dslitdev Ea I Hjp Sjut Number of drilling spindles: 25 Number of tool positions: 26 Vacuum system Vacuum pump: yes Number of pumps: 2 Individual capacity: 100 m³/h Drilling unit Unit: top Spindles for vertical drilling: 25 Milling unit Unit: top Number of controlled axes: 4 Motor power: 11 kW Speed: 24,000 rpm Blade unit Unit: top Blade unit: yes Unit: fixed for making channels in the X direction Max. tool diameter: 100 mm Speed: 7,500 rpm Tool magazines Tool magazine 1 Number of positions: 8 Tool: positioned on the operating head Tool magazine 2 Number of positions: 18 Tool: positioned at the rear of the machine Control Control system: WINDOWS XP Software for programming the machine: WOODWOP Safety systems Barcode label reader: yes Safety standard CE marking: yes Protection grilles attached to the machine: yes Safety system: front safety carpets Electrical Performance Total installed power: 25 kW EQUIPMENT WINDOWS XP control system WOODWOP software Barcode label reader CE marking Protective grille Note: Tools not included

Condition: good (used), Year of construction: 2008, Functionality: fully functional, feed rate X-axis: 20 m/min, edge thickness (max.): 12 mm, product height (max.): 60 mm, TECHNICAL DETAILS Joining milling: yes Multifunctional unit: yes Max. speed of advance: 20 m/min Panel height: 60 mm Assembled units in the format cutting part Unit: corrections Automatic intervention after time: yes Motor power: 3 kW Speed: 11,500 rpm Additional systems Lamps for heating the edge: yes Magazine for the coil: yes Glue basin for hot glue: yes Press roller conveyor edge: yes Number of press rollers: 6 Assembled units in the edge processing part Unit 1: head processing Model manufacturer: 08.415 Number of motors: 2 Motor power: 0.66 kW Speed: 12,000 rpm Unit 2: edge milling Model manufacturer: 08.055 Number of motors: 2 Engine power: 1 kW Speed: 12,000 rpm Dolisv Eaqhstdp Sout Unit 3: Multifunctional unit Manufacturer model: 08.342 Number of motors: 2 Engine power: 0.66 kW Speed: 12,000 rpm Unit 4: Edge scraper Manufacturer model: 08.519 Unit 5: Glue scraper Manufacturer model: 08.50 Unit 6: Brush unit Manufacturer model: 08.612 Number of motors: 2 Engine power: 0.25 kW Speed: 1,500 rpm Control system: ICOS OPEN CE marking: yes

Condition: good (used), Year of construction: 2010, Functionality: fully functional, feed rate X-axis: 20 m/min, edge thickness (max.): 12 mm, product height (max.): 60 mm, product length (min.): 150 mm, product width (min.): 65 mm, TECHNICAL DETAILS Joining milling: yes Multifunctional unit: yes Material and speed information Max. height of the panel: 60 mm Min. length of the panel: 150 mm Min. width of the panel: 65 mm Thickness of the edge: 0.3 - 12 mm Max. feed speed: 20 m/min Pressure by means of: rubberized belt Assembled units in the part of the format cut Unit: corrections Additional systems Lamps for heating the edge: yes Glue basin for polyurethane glue: yes Prefusor for polyurethane glue: yes Doljv Ean Teitdp Seut Pressure roller conveyor edge: yes Number of press rollers: 6 Assembled units in the part of the edge processing Number of units: 6 Unit 1: head processing Model manufacturer: 08.415 Number of motors: 2 Motor power: 0.66 kW Speed: 12,000 rpm Unit 2: router Model manufacturer: 08.0555 Number of motors: 2 Motor power: 1 kW Unit 3: multifunctional unit Model manufacturer: SKF-L Number of motors: 4 Max. processing speed: 20 m/min Motor power: 0.18 + 0.400 kW Speed: 12,000 rpm Unit 4: edge scraper Model manufacturer: 08.519 Unit 5: glue scraper Model manufacturer: 08.521 Unit 6: brushing unit Model manufacturer: 08.617-2 Number of motors: 2 Motor power: 0.18 kW Additional systems Spray unit: yes Control system: WINDOWS Software for programming the machine: ICOS open TS CE marking: yes

Condition: good (used), Year of construction: 2008, Functionality: fully functional, edge thickness (max.): 20 mm, product height (max.): 60 mm, product width (max.): 55 mm, TECHNICAL DETAILS Type of edge applied: thin edge thick edge solid wood Gluing system: EVA Joining milling: yes Multifunctional unit: yes Number of working units: 8 Panel thickness: 12 - 60 mm Panel width: min. 55 mm Edge thickness: 0.3 - 20 mm Speed of advance: 24 m/min Pressure: rubberized belt Panel guide Panel support guide: yes With NC positioning: yes Assembled units in the part of the format cut Unit: corrections Automatic intervention after time: yes Additional systems Lamps for heating the edge: yes Magazine for the coil: yes Number of positions: 2 Glue pot for hot glue: yes Prefusor for hot glue: HOT MELT A34 Press roller conveyor edge: yes Assembled Aggregates in the edge processing section Number of aggregates: 6 Aggregate 1: Head processing Model manufacturer: HL 81 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Aggregate 2: Router Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Aggregate 3: Multifunctional aggregate Model manufacturer: FK 13 Number of motors: 2 Automatic tool change: yes With NC positioning: yes Processing speed: 20 m/min Motor power: 0.4 kW Speed: 12,000 rpm Aggregate 4: Edge scraper Model manufacturer: MN 21 With NC positioning: yes Aggregate 5: Glue scraper Aggregate 6: Brushing aggregate Number of motors: 2 Motor power: 0.18 kW Speed: 14,000 rpm Dslev Eakhjitdp Sjut Additional systems Spray unit: RIEPE LP 163/93 Control system: PC 22 CE marking: yes

Condition: good (used), Year of construction: 2007, Functionality: fully functional, feed rate X-axis: 25 m/min, edge thickness (max.): 3 mm, TECHNICAL DETAILS Jointing milling: yes Multifunctional unit: yes Router unit: yes Drive speed: 25 m/min Pressure by means of: rubberized belt Edge thickness: 0.3 - 3 mm Number of units: 9 Panel guide Panel support guide: yes With NC positioning: yes Panel insertion system at an angle: yes Assembled units in the part of the format cut Unit: corrections Automatic intervention after time: yes Motor power: 3 kW Speed: 9,000 rpm Additional systems Lamps for heating the edge: yes Magazine for the coil: yes Glue pot for hot glue: yes Prefusor for hot glue: yes Press roller conveyor edge: yes Number of press rollers: 7 Dslitdov Eahysp Sout With NC positioning: yes Assembled units in the part of the edge processing Unit 1: Head processing Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Unit 2: Router Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Unit 3: Multifunctional unit Manufacturer model: FF12 Number of motors: 4 Motor power: 0.4 kW Speed: 12,000 rpm Unit 4: Router Number of motors: 1 Automatic intervention after time: yes Motor power: 5 kW Speed: 11,600 rpm Unit 5: Edge scraper Manufacturer model: PN10 Unit 6: Glue scraper Unit 7: Brushing unit Number of motors: 2 Spray unit: yes Control system: PC22 Barcode label reader: yes Safety standard: CE marking