Second-hand machinery for sale (2,399)

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 01160011581, turning diameter over cross slide: 420 mm, turning length: 635 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 25 rpm, tool mount: 30 mm, TECHNICAL DETAILS Control: Heidenhain EP 4290 TP Swing diameter over bed: 570 mm Swing diameter over face guide: 420 mm Face travel: 220 mm Longitudinal travel: 635 mm Dujlim Isufi D Ee Aret Tool holder (DIN 69880): 30 mm Spindle speed: 25 - 5000 rpm Main spindle drive at 100% ED: 21 kW Torque: 240 Nm Tool turret: 12 positions, 6 of which are driven MACHINE DETAILS Dimensions without chip conveyor: 3210 x 1750 x 1750 mm Weight without chip conveyor: 5300 kg EQUIPMENT - Automatic sliding hood - Chip conveyor - Extraction unit - Measuring arm

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 8FBEK18T-10385, Year of construction: 2016, operating hours: 19,769 h, load capacity: 1,800 kg, lifting height: 3,300 mm, fuel type: electric, mast type: duplex, construction height: 2,150 mm, Full functionality according to FEM-4.004 Maintained & tested battery with min. 95 % capacity Serviceable tires with at least 70 % tread depth Forks and lifting chains with a maximum wear limit of 40% Driver's seat and seat belt as good as new New paintwork in original colors and original stickers TECHNICAL DETAILS Drive type: Electric Lifting capacity: 1,800 kg Lifting height: 3,300 mm Load center of gravity: 500 mm Mast type: Duplex Fork length: 1000 mm MACHINE DETAILS Operating hours: 19,768 h Length: 1,850 mm Overall width: 1,000 mm Overall height: 2,150 mm Front tires: solid rubber Rear tires: Solid rubber Tare weight: 2,475 kg + 790 kg battery Battery voltage: 48 V Battery year of construction: 2020 (stock battery, few cycles) Battery capacity test: 99% Battery: 625 Ah EQUIPMENT - Sideshifter Duelimst Di Ayo I Arot

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 10363, Year of construction: 2018, load capacity: 1,750 kg, lifting height: 5,000 mm, fuel type: gas, mast type: triplex, construction height: 2,200 mm, tested and reconditioned according to FEM-4.004 (UVV) specifications. TECHNICAL DETAILS Drive type: GAS/LPG Lifting capacity: 1,750 kg Lifting height: 5,000 mm Load center of gravity: 500 mm Mast type: Triplex Lifting height: 5,000 mm Fork length: 1,200 mm MACHINE DETAILS Operating hours: 14,195 h Overall height: 2,200 mm Dead weight: approx. 3,070 kg Front tires: solid rubber Rear tires: Solid rubber Dujlist Dam Nem I Arjt EQUIPMENT - Sideshift - Special equipment: Free lift

Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: FN587504, Year of construction: 2018, operating hours: 8,085 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: gas, mast type: triplex, construction height: 2,200 mm, Full functionality according to FEM-4.004 Serviceable tires with at least 70 % tread depth Forks and lifting chains with a maximum wear limit of 30% Driver's seat and seat belt as good as new New paintwork in original colors and with original stickers TECHNICAL DETAILS Drive type: Gas Lifting capacity: 2,500 kg Lifting height: 4,700 mm Load center of gravity: 500 mm Mast type: Triplex Fork length: 1,150 mm Dolimet Dah Hj I Areut MACHINE DETAILS Operating hours: 8,085 h Overall height: 2,200 mm Dead weight: 4,111 kg Front tires: Solid rubber - non-marking Rear tires: Solid rubber - non-marking EQUIPMENT - Sideshift - Load protection grille - Front work lights - Rear rotating warning light

Year of construction: 2016, operating hours: 11,480 h, Condition: excellent (used), Functionality: fully functional, fuel type: gas, machine/vehicle number: FN524842, Conversion to sideshift or other attachments possible. - repaired and tested according to FEM4.004: UVV inspection up to date - workshop tested - optically professionally refurbished, as good as new - charger included TECHNICAL DETAILS type of drive: gas Duolim Iji Hlrmo Aret load capacity: 4500 kg load center: 500mm Operating hours: 11480 h Mast type: Duplex Lifting height: 3500 mm Fork length: 2000 mm MACHINE DETAILS overall height: 2500 mm dead weight: 6845kg Driving power: 59,0 kW EQUIPMENT Attachments: sideshift Special equipment: working lights front & rear , StVZO Front tires: Solid rubber Rear tires: Solid rubber

Condition: good (used), Year of construction: 2005, operating hours: 13,917 h, Functionality: fully functional, machine/vehicle number: 11590000083, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, Bidding obliges the buyer to pick up the machine on time by the end of February. The machine can be viewed under operating conditions until February 6, 2025.  TECHNICAL DETAILS x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm Control type: Heidenhain iTNC 530 Spindle Max. spindle speed: 12,000 rpm Tool holder: SK40 Tool changer Available: yes Tool positions: 32 MACHINE DETAILS Space requirement: 25 m² Loading dimensions (L x W x H): 3.2 x 2.3 x 2.7 m Weight: 9.6 t Operating hours (as of week 45/2023): 45,746 h Spindle hours (as of week 45/2023): 13,917 h EQUIPMENT - Chip conveyor - External coolant system Duslimevu A S Ho I Arot - 50 x SK40 tool holders

Condition: ready for operation (used), Functionality: fully functional, maximum load weight: 120 kg, operation weight: 3,500 kg, Year of construction: 2022, operating hours: 66 h, arm reach: 7,300 mm, working height: 12,500 mm, Equipment: crane, TECHNICAL DETAILS Service weight: 3,500 kg Max. load capacity: 120 kg Duslevy Et Rjim I Arot Tires: all-season tires Load weight: 120 kg Range: 7.3 m Radius: 360° Working height: 12.5 m Height of basket bottom edge: 10.5 m Brand of basket: Klubb MACHINE DETAILS Operating hours: 66 h Weight: 3500 kg Vehicle height - mobile: 3.4 m Vehicle length - mobile: 6.8 m EQUIPMENT - 220V connection in the work basket - Reinforced suspension

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, workpiece height (max.): 40 mm, working width: 200 mm, working length: 3,200 mm, TECHNICAL DETAILS Machinable length: 200 - 3,200 mm Machinable width: 40 - 200 mm Workpiece height: max. 130 mm Depth with maximum mortise Ø 320 mm: 105 mm Tenoning carriage speed: 0 - 100 m/min Profiling speed: 3 - 15 m/min Tenoning 1st cross-cut saw: Power: 5.5 HP (4 kW) Saw Ø: 400 mm 2nd tenon cutter Counter bearing: 50 x 620 mm Power: 15 HP (11.3 kW) Maximum tool Ø: 320 mm Axle stroke: 575 mm Automatic splinter guard: Available 3rd tenoning cutter Counter bearing: 50 x 620 mm Power: 15 HP (11.3 kW) Maximum tool Ø: 320 mm Axle stroke: 575 mm Automatic splinter guard: Available Vertical positioning: With continuous axis 4th digital angle adjustment bracket: Available 5. right router (profiling) Shaft: 50 x 320 mm Power: 10 HP (7.5 kW) Tool Ø: 130 / 240 mm Axis stroke: 280 mm Double direction of rotation: Available Positioning: Vertical and horizontal with continuous axis Intervention (calibration): Time-delayed against vibrations 6. right router (profiling) Shaft: 50 x 320 mm Power: 10 HP (7.5 kW) Tool Ø: 130 / 240 mm Axis stroke: 280 mm Positioning: Vertical and horizontal with continuous axis 7. right router (profiling) Shaft: 50 x 320 mm Power: 10 HP (7.5 kW) Tool Ø: 130 / 240 mm Positioning: Vertical and horizontal with continuous axis Duelim I Ajvit E Heret 8th restoration group Positioning: Vertical and horizontal with continuous axis Device: For pulling out the lock 9. lower horizontal shaft (groove) Positioning: Vertical and horizontal with continuous axis Power: 88.5 HP (66.4 kW) 10. digital guidance: available 11. return of the parts: To the operator

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 18,000 rpm, swivel angle B-axis (min.): -60 °, swivel angle B-axis (max.): 120 °, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 400 mm Z-axis: 510 mm Control: HEIDENHAIN iTNC 530 table Table diameter: 400 mm Number and width of T-slots: 4 x 12 mm, 90° Rotation 4th axis: 360°, through-rotation Inclination 5th axis: +120° to -60° Spindle Distance between spindle nose and table: 120 - 630 mm Spindle speed: max. 18-000 rpm tools Automatic tool changer: 40 tools Tool holder: Big Plus 40 taper Wash gun: yes Portable handwheel: Type HR-410 Work feeds Djlimoukfnle I Arout Rapid traverse (X, Y): 36 m/min Rapid traverse (Z): 36 m/min MACHINE DETAILS Base area: 2,820 x 3,800 mm Maximum height: 3,142 mm Net weight (40 tools): 7,000 kg Equipment - Linear scales on each axis - Coolant supply: 20 bar - Chip conveyor - Measuring device for workpiece and tool - Kinematics function

Condition: ready for operation (used), Year of construction: 1972, Functionality: fully functional, turning diameter over cross slide: 620 mm, spindle bore: 85 mm, center width: 5,000 mm, spindle speed (max.): 1,800 rpm, TECHNICAL DETAILS Speed range: 9 – 1,800 rpm Motor power: 15 kW Spindle bore: 85 mm Chuck diameter: 500 mm Working area Turnover over bed: 620 mm Turnover over support: 320 mm Center distance: 5,000 mm Dolievurinem I Arjut MACHINE DETAILS Machine weight: approx. 10 t EQUIPMENT - 2 axes digital display - Face plate - 2 lynettes - Steel holder - Rapid traverse - 3 lattice boxes Accessories

Condition: good (used), Year of construction: 2005, Functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 60 rpm, TECHNICAL DETAILS Travel X/Y/Z axes: 500 x 350 x 500 mm Duelimovuqxbo I Arst Max. workpiece dimensions (width x depth x height): 880 x 680 x 350 mm Max. workpiece weight: 800 kg Workpiece area Work tank type: Automatic lowering tank Internal tank dimensions: 1,090 x 730 x 490 mm Bath height: 0 - 390 mm Machine table Clamping surface: Grid plate with 50 mm hole grid Programmed brake position: yes Dimensions: 800 x 600 Integrated C-axis Indexing and rotation: Interpolation with X, Y and Z as well as spiral machining Speed: 60 rpm Max. working current: 72 A Electrode changer Automatic: integrated Electrode weight: 100 kg Generator Type: AGIE IPG "Intelligent Power Generation" Best surface roughness Ra: 0.1 µm Dielectric unit Loading volume: 620 l Filter quality: 4 cartridges with 8 filter elements Cooling system: water/air heat exchanger Temperature control: ± 1 °C automatic MACHINE DETAILS System dimensions: 2,855 x 2,135 x 2,965 mm Distance floor - clamping height: 884 mm Net weight: approx. 3,900 kg Gross weight: approx. 5,500 kg Cooling System: water/air cooler for generator, control and dielectric Norms and guidelines Standards: Directive 89/336/CEE Electromagnetic compatibility

Condition: good (used), Year of construction: 1999, operating hours: 9,188 h, Functionality: fully functional, machine/vehicle number: 1092 000010 3, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 6,000 rpm, The bid obliges the buyer to pick up the machine on time on March 4, 2025! TECHNICAL DETAILS Control: MillPlus X-axis: 800 mm Y-axis: 650 mm Z-axis: 550 mm Spindle speed: 6,000 rpm Tool holder: SK 40 Operating hours: 50,819 h Spindle hours: 9,188 h MACHINE DETAILS Machine weight: approx. 5,500 kg Djljvxrazjim I Arjut Floor space: 3,500 x 2,500 mm Cooling lubricant: KSS

Condition: refurbished (used), Year of construction: 2016, Functionality: fully functional, machine/vehicle number: 403/FL06, punching force: 28 t, laser power: 2,000 W, laser wavelength: 1,070 nm, punching diameter: 105 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness steel (max.): 15 mm, table length: 3,100 mm, table height: 900 mm, table width: 4,250 mm, No reserve price - guaranteed sale at the highest bid! Machine was overhauled by Boschert in 2022! TECHNICAL DETAILS Punching force: approx. 2 x 280 kN (28 t) Punching throat: approx. 1,750 mm Max. punching diameter: 105 mm (any shape within 105 mm) Max. sheet thickness: 6 mm (clamp opening) Max. stroke height: 90 mm (continuously programmable) Thread cutting: M3 - M12 Slide stroke: 160 mm Stroke rate (for sheet thickness 2 mm) Travel path 0.1 mm: 280 strokes/min (385 with fast hydraulics) Travel path 2.0 mm: 200 strokes/min (275 with fast hydraulics) Travel path 25.0 mm: 125 strokes/min (175 with fast hydraulics) Table dimensions Table width left + right: 4,250 mm / 3,250 mm Table depth: 3,100 mm Table height: 900 mm Laser source Model: XFocus 2000 Max. connected load: 7 kVA (100% duty cycle) Operating temperature: 5 - 40 °C (store frost-free) Air humidity: 10–95% Storage temperature: -40 - 75 °C (without water) Laser protection class: Class 4 according to DIN EN 60825-1 Sheet thicknesses Mild steel (maximum): 15 mm Mild steel (recommended): 0.5 - 10 mm Alloyed steel (maximum): 8 mm Alloyed steel (recommended): 0.3 - 6 mm Aluminum (maximum): 6 mm Aluminum (recommended): 0.3 - 4 mm Djlim Ijvwbrwe Arout Fiber laser Output power: 2,000 W Wavelength: 1,070 nm (± 10 nm) Modulation rate: 5 kHz Pilot laser power: < 1.0 mW Optical fiber: fiber cross-section 100 µm Cooler Max. connected load: 9 kVA Number of cooling circuits: 2 Design point: 33 °C Air volume: 4,000 m³/h Temperature range (operation): 10 - 40 °C (store frost-free) Storage temperature: -40 - 64 °C (without water) Coolant: DI water Pressure: max. 2 bar Flow rate: laser cooling circuit 28 l/min, head circuit 2 l/min Coolant water temperature: laser 21 °C (± 1 K), head 25 °C (± 1 K) Cooling capacity: 5.5 kW Dimensions (L x W x H): 626 x 807 x 1,362 mm Mass: 340 kg (without water filling) MACHINE DETAILS Overall width: 6,500 mm Overall depth: 5,000 mm Overall height: 2,100 mm Drive power: 20 kVA (25 kVA with fast hydraulics) Machine weight: 16,200 kg Hydraulic oil filling: 115 l (160 l with fast hydraulics) Laser dimensions (L x W x H): 1,250 x 810 x 1,500 mm Laser mass: approx. 300 kg

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, feed length Y-axis: 200 mm, feed length Z-axis: 335 mm, travel distance X-axis: 400 mm, spindle speed (max.): 1,890 rpm, TECHNICAL DETAILS Drilling and milling head Milling head swivel range: ± 90° Drilling and milling capacity Cutter head size max.: 100 mm Drilling capacity steel (S235JR): 30 mm Continuous drilling capacity steel (S235JR): 26 mm Shank cutter size max.: 25 mm Electrical data Drive motor power: 2.2 kW Supply voltage: 400 V Mains frequency: 50 Hz Horizontal milling table Length: 750 mm Width: 320 mm Distance vertical spindle - horizontal milling table min.: 75 mm Distance vertical spindle - horizontal milling table max.: 410 mm T-slot size: 14 mm Number of T-slots: 5 T-slot distance: 63 mm Distance horizontal spindle - horizontal milling table min.: 70 mm Dslimou Nh Dnj I Arsut Distance horizontal spindle - horizontal milling table max.: 400 mm Max. load capacity: 285 kg Vertical milling table Length: 830 mm Width: 250 mm T-slot size: 14 mm Number of T-slots: 2 T-slot spacing: 63 mm Coolant system Coolant pump Drive power: 95 W Travel (manual) X-axis: 400 mm Y-axis: 200 mm Z-axis: 335 mm Travel (automatic) X-axis: approx. 310 mm Y-axis: approx. 160 mm Z-axis: 295 mm Vertical spindle Projection: 100 mm Spindle holder: ISO 40 DIN 2080 Speed range: 50 - 1,890 min-¹ Number of speed ranges: 12 steps Tightening bar: M 16 Quill stroke: 120 mm Max. load: 1,100 Nm Feed speeds X-axis: 10 - 600 mm/min Y-axis: 10 - 600 mm/min Z-axis: 10 - 600 mm/min Electrical connection Total connected load: 4 kW Motor(s) Rapid traverse X-axis Drive motor power: 0.375 kW Rapid traverse Y-axis Drive motor power: 0.375 kW Rapid traverse Z-axis Drive motor power: 0.375 kW Dimensions and weights Length: approx. 1,239 mm Width/depth: approx. 1,168 mm Height: approx. 1,900 mm Weight: approx. 1,400 kg EQUIPMENT With digital 3-axis position display DP 700 from NEWALL, inverter drive of the feed axes, control panel with integrated joystick for feed settings, electric feed limit switch-off, ball screw in all axes, central control panel with digital position and speed display, solid cross table with 5 T-slots, coolant device, machine lamp, manual central lubrication.

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 12,000 rpm, swivel angle B-axis (min.): -60 °, swivel angle B-axis (max.): 120 °, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 400 mm Z-axis: 510 mm Control: HEIDENHAIN iTNC 530 table Table diameter: 400 mm Number and width of T-slots: 4 x 12 mm, 90° Rotation 4th axis: 360°, through-rotating Inclination 5th axis: +120° to -60° Spindle Distance between spindle nose and table: 120 - 630 mm Spindle speed: max. 12,000 rpm Dolimsukfm Ue I Arsut tools Automatic tool changer: 40 tools Tool holder: Big Plus 40 taper Wash gun: yes Portable handwheel: Type HR-410 Work feeds Rapid traverse (X, Y): 36 m/min Rapid traverse (Z): 36 m/min MACHINE DETAILS Base area: 2,820 x 3,800 mm Maximum height: 3,142 mm Net weight (40 tools): 7,000 kg Equipment - Linear scales on each axis - Coolant supply: 20 bar - Chip conveyor - Measuring device for workpiece and tool - Kinematics function

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Sheet thickness - max.: 6.4 mm Pressing force: 220 kN Workpiece weight: 150 kg Punching diameter: 76.2 mm X-axis travel: 2,000 mm Y-axis travel: 1,250 mm Positioning speeds Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Simulation positioning speed: 108 m/min Positioning speed rotary axis: 360 °/s Smallest programmable path dimension: 0.01 mm or 0.01° Duolsvura Heim I Arst Tools Tool stations: 15 tools Tool change time: 1.5 - 6.5 s MACHINE DETAILS Machine dimensions: 6,400 x 5,800 x 2,100 mm Machine weight: approx. 11,050 kg

Condition: good (used), Year of construction: 2013, operating hours: 20,791 h, Functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 550 mm, workpiece length (max.): 750 mm, TECHNICAL DETAILS Max. workpiece dimensions width x depth x height: 750 x 550 x 250 mm Max. workpiece weight: 200 kg (submerged), 450 kg (not submerged) Travel paths Travel paths X/Y/Z axes: 350 / 250 / 256 mm Travel paths U/V axes: ±70 mm Max. taper at height: 30° at 100 mm Positioning speeds Manual positioning speed X/Y/Z/U/V axes: 2 m/min Programmable positioning speed X/Y/Z/U/V axes: 3 m/min Remote control Functions: wire drive, work container, measuring cycles Display resolution: 0.0001 mm Jogger: electronic handwheel for X/Y/U/V/Z axes Control console Display: TFT 15" XGA (1024 x 768) Input elements: alphanumeric push buttons, keyboard/mouse Wire threading system Threading height: up to 250 mm Threading nozzle diameter: 2 mm Combined wire guide Wire diameter: standard 0.07 - 0.3 mm (option: 0.05 mm) V-Guide: cylindrical to 2° Toroid guide: 2° - 30° Wire drive Duelovuqtfjim I Arot Wire spool: up to 25 kg Wire tension: 0 - 25 N Wire speed: 0 - 300 m/s Wire guide: semi-automatic Wire disposal: Schopper Work container Access: automatic lowering container Clamping system: clamping support or universal Clamping frame Operating mode: water bath and/or coaxial flushing Height adjustment: 0 - 250 mm automatic Flushing Flushing pressure: 0.2 - 18 bar programmable Flushing combination: coaxial/flushing/extraction Dielectric unit Load volume: 700 l Pre-cleaning: 10 µS/cm Water quality: 4 canisters with 8 filter cartridges Deionization resin: 10 l Water conductivity: 2 µS/cm automatic Cooling system: water/heat exchanger Temperature control: ±1 °C automatic IPG generator Generator: integrated Average working current: 38 A Feed control: servo-controlled/fixed feed Cooling system: air/heat exchanger Max. cutting speed, cylindrical: 300 mm²/min Best roughness Ra: 0.1 µm Average contour deviation Tkm: ± 1 µm (Tf 6 µm) Vision 5 control Control/operator interface: Vision 5 Operating system: Windows XP Operating mode: Multiprocessor Units of measurement: mm/inch Instruction set: absolute/incremental Smallest programmable step: 0.0001 mm Max. instruction length: 15 digits with floating point Max. path correction: 6 mm MACHINE DETAILS Dimensions width x depth x height: 2,095 x 1,950 x 2,247 mm Distance floor - clamping surface: 1,100 mm Net weight: 2,800 kg

Condition: good (used), Year of construction: 2000, operating hours: 50,542 h, Functionality: fully functional, machine/vehicle number: 01160005891, spindle speed (max.): 5,000 rpm, travel distance X-axis: 600 mm, travel distance Z-axis: 212 mm, The bid obliges the buyer to pick up the machine on time on March 4, 2025! TECHNICAL DETAILS Control: Heidenhain X-axis: 600 mm Z-axis: 212 mm Spindle speed: 5,000 rpm Tool holder: VDI Tool magazine positions: 12 MACHINE DETAILS Machine weight: approx. 5,500 kg Floor area: 5,000 x 2,500 mm Connected load: 44 kVA Voltage: 400 V, 50 Hz Dujlisvxq R Ejm I Aret Cooling lubricant: KSS

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 181612, Machine with high torsional rigidity for heavy-duty machining of steel and cast parts TECHNICAL DETAILS Control system: MAZATROL 640M NEXUS Travel X / Y / Z: 800 / 800 / 800 mm Rapid traverse: 60 m/min C-axis rotary table: 3,600,000 positions Spindle speed: 10,000 rpm Distance spindle nose to table: 150 - 950 mm Table size: 500 x 500 mm Load capacity: 1 t Tool length: 500 mm Number of tool positions: 60 Tool holder: SK-50 Tool weight: 30 kg Tool diameter: 125 / 250 mm Tool change time: 3.5 s MACHINE DETAILS Space requirement: approx. 7 x 3 x 3.5 m Weight: 14.6 t Nominal connected load: 76.68 kVA High-pressure cooling IKZ: 70 bar Dolimsufigao I Arsut Chip conveyor: Mayfran Consep 2000

Condition: good (used), Year of construction: 2000, Functionality: fully functional, turning diameter over cross slide: 390 mm, turning length: 1,500 mm, turning diameter: 400 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 35 rpm, number of slots in tool magazine: 40, No reserve price - guaranteed knockdown to the highest bidder at the end of the auction! TECHNICAL DETAILS Control: Mazak Fusion 640 MT Mazak Turning diameter: 400 mm turning length: 1500 mm Turning diameter over bed slide: 390 mm Turning diameter over bed: 610 mm Spindle speed: 35 - 3500 rpm Dslieucty Sjm I Areut Spindle bore: 88 mm Tool holder: KM 63 Tool magazine: 40 positions Chuck: 3 jaws, Kitagawa B -15 (400 mm) MACHINE DETAILS Total power requirement: 48 kW Space requirement: approx. 5.4 x 2.0 x 2.9 m Weight: approx. 9600 kg EQUIPMENT - Chip conveyor - Tailstock

Year of construction: 2013, operating hours: 63,326 h, Condition: used, Functionality: fully functional, Fully automatic MICROFINISH machine for machining camshafts with max. Ø 60 mm and a total length of 700 mm. Year of manufacture 2000/2013 converted to pass bearing machine. TECHNICAL DETAILS workpiece length: 700 mm swing diameter: 60 mm center height: 1050 mm spindle stroke: 42 mm Deljpxl Uhjim I Areut tailstock stroke: 250 mm number of spindles: 1 number of fiducial bearing machining stations: 1 piece Control: CNC Speed: 25 - 250 rpm (infinitely variable) oscillation stroke: 0 - 6,5 mm Oscillation frequency workpiece (axial): 100 - 1000 DH/min MACHINE DETAILS total power requirement: 61 kW machine weight: approx. 9 t (without additional aggregates) space requirement: approx. 4 x 2.5 x 2.4 m

Condition: ready for operation (used), Year of construction: 1995, operating hours: 51,658 h, Functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, TECHNICAL DETAILS Sheet width: 2,500 mm Sheet length: 1,250 mm Dujlimevuq Uvs I Arot Sheet thickness: 8 mm Punching force: 220 kN MACHINE DETAILS Operating hours: 51,658 h Machine weight: approx. 11,050 kg EQUIPMENT - TRUMPF Sheetmaster

Condition: good (used), Year of construction: 2012, Functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, table width: 400 mm, table length: 600 mm, TECHNICAL DETAILS Travel paths of axes X / Y / Z: 400 x 300 x 350 mm Positioning speed of axes X / Y / Z: 6 / 6 / 15 m/min Positioning speed in manual mode of axes X / Y / Z: 2 m/min Acceleration of axis Z: 10.0 m/s² Resolution of axes X / Y / Z: 0.1 µm Laser correction of axes X / Y / Z: linearity / angle / spindle pitch Integrated C-axis Max. electrode weight: 50 kg Rotational speed: 0 -100 g/min Max. mass moment of inertia: 5,000 kg cm² Max. working current: 140 A (in rotation mode) Max. working current: 140 A (static) Positioning accuracy according to ISO 230-2: 0.007° Resolution: 0.0005° Dielectric unit Capacity: 490 l Filter type: 4 cartridges Cooling system: Heat exchanger dielectric / water Temperature control: ±1 °C automatic Generator Generator type: ISPG (Intelligent Speed Power Generator) Pulse current: 80 A Best surface roughness Ra: 0.1 µm IQ module (graphite, copper): integrated Control Operating system: Windows XP Data input: 15" LCD screen, mouse or touchscreen, keyboard and remote control User interface: Vision 5 Work area Clamping plate with hole pattern: Hole spacing 50 mm Distance table - chuck: 170 - 520 mm Distance floor - clamping level: 1,000 mm Max. table size: 600 x 400 mm Max. work basin dimensions: 900 x 630 x 350 mm Workpiece and electrode Max. electrode weight: 50 kg Max. workpiece weight: 800 kg Max. workpiece dimensions: 820 x 580 x 250 mm Bath level: 0–290 mm Compressed air Pressure: 6 - 8 bar Average consumption: 100 ± 10 % m³/h Max. consumption: 270 l/min at a pressure of 6 bar while filling the work tank (duration approx. 40 s) Connection: hose coupling Ø 13 mm Cooling water Temperature: room temperature - 7 °C Quantity: approx. 20 l/min Pressure: 1.5–3 bar Cooling and environment Heat exchanger for control cabinet: integrated Heat exchanger for dielectric: integrated Ambient temperature: recommended 20 °C - 25 °C MACHINES DETAILS Machine dimensions: 2,460 x 1,410 x 2,600 mm Dujlim Ijvuqmfs Arst Dimensions with electrode changer: 2,460 x 2,100 x 2,600 mm Dimensions with pallet changer: 2,460 x 2,630 x 2,600 mm Weight Total weight: 3,830 kg Dielectric weight: 400 kg EQUIPMENT 1 heat exchanger for control cabinet, integrated. 1 heat exchanger for dielectric, integrated.

Condition: good (used), Year of construction: 2001, Functionality: fully functional, pressing force: 225 t, working length: 6,050 mm, TECHNICAL DETAILS Axes controlled: Y1, Y2, X, R, Z1, Z2 Pressure: 225 t Bending length: 6050 mm Control: CYBELEC DNC 1200 PS Dolsvuq Najim I Areut Dimensions: 6,050 x 2,150 x 3,167 mm Total power requirement: 18.5 kW EQUIPMENT - 2 bending aids in front of the machine - 2 support arms in front of the machine - pneumatic tool clamping at the top - crowning, die shifting - foot switch Tool holder: - top: 26 mm EHT - bottom: 55 mm EHT Please note: This machine is an underfloor machine

Condition: ready for operation (used), Year of construction: 1996, Functionality: fully functional, pressing force: 225 t, bending length: 4,100 mm, controller manufacturer: Cybelec, TECHNICAL DETAILS Pressure: max. 225 t Folding length: max. 4,100 mm Stroke: max. 265 mm Total output: 18.5 kW Control: Cybelec Machine weight: approx. 21,500 kg Dslim I Asvuq Ehereut EQUIPMENT - Lower beam crowning for precise bending processes. - 2 manual support arms - 2-hand foot switch