Second-hand machinery for sale (2,399)

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 150204, table length: 2,000 mm, table width: 1,000 mm, pressing force: 100 t, ram stroke: 300 mm, Automatic punching press with automation TECHNICAL DETAILS Total pressing force: 100 t Stroke: 300 mm Adjustment: 125 mm Stroke at bottom, adjustment at top: 600 mm Number of strokes: 10 - 50 min-¹ Control system: Siemens S7 Dimensions Distance between the uprights L-R: 2,020 mm Distance between the uprights at the side: 620 mm Table clamping surface: approx. 2,000 x 1,000 mm Ram clamping surface: approx. 2,000 x 900 mm Opening in the table: 1,700 x 300 mm Table height above floor: 1,200 mm MACHINE DETAILS Power requirement: 39 kW Height above floor: approx. 4,400 mm Fpebou Unmqou Ugp Ijg Dimensions (L x W x H): 5,166 x 2,500 x 4,400 mm Machine weight: approx. 38 t EQUIPMENT - Electrical overload protection - Two-hand operation - Schleicher straightener: width 650 mm, max. thickness 2.0 mm - Wanzke decoiler: max. load 6 t - Helmerding feed: width 600 mm, thickness 0.6 - 6.0 mm

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: C7004367, Year of construction: 2019, operating hours: 1,706 h, load capacity: 3,800 kg, lifting height: 13,800 mm, arm reach: 8,600 mm, Equipment: sideshift, TECHNICAL DETAILS Lifting height: max. 13.80 m Reach: max. 8.60 m Load capacity: max. 3,800 kg Load capacity at full reach: max. 800 kg Drive and engine Engine: diesel (Kubota engine) Drive: 4x4 all-wheel drive Steering: all-wheel steering Tires Tires (VR/VL, HR/HL): approx. 75% Type: off-road tires MACHINE DETAILS Transport dimensions (L x W): 5.24 x 2.22 m Clearance height: 2.44 m Own weight: 8,900 kg Operating hours: 1,706 h (as of January 20, 2025) Previous owner: first owner Visual condition: good Technical condition: good Place of use: inside, outside, Terrain Fpjbjvr Tdzju Ugp Ieg Maintenance and inspections Last service: 11/2024 Last UVV inspection: 11/2024 UVV valid until: 11/2025 Condition: Without UVV-relevant defects EQUIPMENT - Tow bar - Heating - 4x4x4 drive - Kubota engine - Quick coupler - Level control - Supports - Merlo sideshift - All-wheel steering - Cab with heating

Condition: good (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 107.33.99.021, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: iTNC 426 / 430, table width: 590 mm, table length: 1,050 mm, TECHNICAL DETAILS Machine type: 3-axis machining center Manufacturer: MIKRON Type: VCP 800 Fpebueu Dnc Hj Ugp Iog Control: HEIDENHAIN iTNC 426 / 430 Serial number: 107.33.99.021 Year of manufacture: 2000 Axes and table Number of axes total: 3 Number of spindles: 1 Table length: 1,050 mm Table width: 590 mm Number of T-slots: 8 Distance between T-slots: 63 mm T-slot width: 14 H7 mm Max. Workpiece weight on the table: 400 kg Longitudinal travel (X-axis): 800 mm Transverse travel (Y-axis): 450 mm Vertical travel (Z-axis): 450 mm Tool changer Type: TC 30 Tool diameter max.: 90 mm Diameter with free secondary positions: 110 mm Maximum tool length: 250 mm Maximum tool weight: 6 kg Tool change time: 5 seconds Average chip-to-chip time: 7 seconds Tool holder: HSK-A 63 DIN 69893 Spindle speed Speed infinitely variable from: 100 rpm to: 20,000 rpm Feed speed: 1,500 mm/min Rapid traverse: 22 m/min Connections and power Compressed air connection: 6-7 bar Electrical connection: 400 V, 50 Hz, 3-phase Total power requirement: 40 kW Noise level: 75 dB(A) Dimensions and weight Machine weight approx.: 6,500 kg Dimensions (L x W x H): 3,160 mm x 2,240 mm x 2,645 mm EQUIPMENT Coolant system 120 l Paper filter system Renishaw workpiece probe Tool breakage control Chip conveyor Electronic handwheel Lighting Machine can be viewed assembled and, after consultation, can be energized for inspection.

Condition: excellent (used), Year of construction: 2000, operating hours: 49,274 h, Functionality: fully functional, machine/vehicle number: 247, turning length: 80 mm, spindle speed (max.): 12,000 rpm, feed length X-axis: 35 mm, feed length Y-axis: 37 mm, feed length Z-axis: 75 mm, bar diameter: 12 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Mitsubishi TX-8i Turning length: 80 mm Fjbu Ugsvrz E Hjp Iopg Main spindle Technology: belt spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12.7 mm Travel path in Z1: 75 mm Workpiece clamping: collet chuck Counter spindle Technology: belt spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel path in X3/Z4: 222 mm / 139 mm Rapid traverse in X3/Z4: 30 m/min Workpiece clamping: collet chuck Tool carrier I (X/Y) Technology: turret with 6 stations (total drive) Tool holder: Ø 25 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Travel path in X1/Y1: 35 mm / 37.5 mm Rapid traverse in X1/Y1: 15 m/min Front attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch spacing: 32 mm Tool drive: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel path in X3/Z3: 222 mm / 139 mm Rapid traverse in X3/Z3: 30 m/min Rear attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch spacing: 32 mm MACHINE DETAILS Dimensions: 1,450 x 950 x 1,480 mm Weight: 1,600 kg Connected load: 16 kW Installation dimensions: 7,943 x 1,430 x 1,480 mm Control switch-on time: 96,171 h Switch-on time: 100,147 h Production time: 45,983 h Spindle 1: 49,274 h Spindle 2: 47,771 h Spindle 5: 15,297 h EQUIPMENT - Chip management: Chip conveyor - Coolant management: KSS pump - Raw material feed: Bar loader, FMB minimag 3200 - Finished part removal: Workpiece removal device (pipe) - Emulsion mist extraction: Interface mechanically prepared - Tool holder: Various rigid and driven holders

Year of construction: 2002, Condition: used, Functionality: fully functional, machine/vehicle number: J20M0036, Wire EDM machine with automatic wire threading (AT) TECHNICAL DETAILS x-way: 500 mm y-way: 350 mm z-way: 300 mm amps: 50 A table length: 780 mm table width: 630 mm table feed: 1 - 1.300 mm/min Febjnh R Nkeu Ugp Ijpg wire feed: 15,00 m/min Control: W21F AP-2 workpiece size: 1050 x 800 x 295 mm workpiece weight: max. 800 kg MACHINE DETAILS total power requirement: 12,00 kW machine weight: approx. 4,50 t space requirement: approx. 3.00 x 3.50 x 2.50 m

Condition: like new (used), Year of construction: 2018, operating hours: 1,646 h, Functionality: fully functional, machine/vehicle number: GN4240001, Cylindrical grinding machine in special design and with automation SPECIAL VERSION - Tailstock as counter spindle with C-axis 0.001° (synchronized with workpiece spindle - optional) - Center taper MT no. 4 - Stroke 25 mm (with CNC position control) AUTOMATION - Fanuc industrial robot, model M-10iA 10M with force sensor and Schunk gripper - Rotating robot table - Robot connected to the machine (ready for work) TECHNICAL DETAILS Distance between chuck and counter spindle: 300 mm (special version) Center distance: 400 mm (without chuck) Center height: 210 mm (radius) External grinding diameter with / without tailstock: Ø 300 / 400 mm Control: Fanuc 0I-TF Grinding spindle Grinding wheel dimensions: Ø 405 x 50 - 75 mm Motor: 5.5 kW Speed: 1783 rpm Workpiece spindle Workpiece chuck: Hainbuch Spanntop mini size 52 Motor: 2.7 kW Spindle speed: 10 - 300 rpm C-axis: 0.001° Rotation angle: -30° / +90° (manual) AUTOMATION Robot: Fanuc M-10iA 10M Number of axes: 6 Payload: 10 kg Reach: 1422 mm Mass: 130 kg Equipment: Force sensor, Schunk gripper MACHINE DETAILS Switch-on time: 3914 h Grinding time: 1646 h EQUIPMENT - Grinding sensor (Marposs) - Balancing system (Marposs) - Measuring probe for checking linear dimensions and the other for checking cylindrical dimensions - in progress (Marposs) - Steady rest for grinding (Arobotech) - Power clamping cylinder for workpiece spindle - pneumatic Fpebujtr A Rhe Ugp Ijg - Cooling unit with filter system - Grinding mist extraction

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, rotational speed (max.): 24,000 rpm, TECHNICAL DETAILS Make: PASO Machine type: HSC milling machine Year of manufacture: 2004 Condition: Very good (last used for milling graphite electrodes, incl. dust extraction and filter system) Control system Type: Heidenhain iTNC 530 Manual control unit: Heidenhain HR 410 Operating terminal: Rollbar Working area X-axis: 700 mm Y-axis: 440 mm Z-axis: 400 mm Drive system System: Indramat Milling spindle Type: IMT HSK 32 Power: 9 kW Speed: max. 24,000 rpm Converter Type: S&M 21.80 Recooler Type: Chilly 25 Tool changer Type: Drum Capacity: 16-fold Cooling system System: Minimum spray cooling system (Indutec) Number of nozzles: 1 Coolant volume: 1 l Dividing head Manufacturer: Wittenstein Type: Alpha TP10 Suction unit Type: Volume extraction with suction cup OTHER The machine can be inspected under power. Last used for milling graphite electrodes, incl. dust extraction and filter system Control system and all air hoses were replaced in 2022 for over €10,000 (invoice available) Fobu Ugpou R S Hie Ispg

Condition: good (used), Year of construction: 2012, Functionality: fully functional, turning length: 160 mm, turning diameter: 140 mm, spindle bore: 42 mm, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Control system: Mitsubishi Main spindle: with hydraulic brake and C axis Machining diameter: max. 140 mm (chuck) / 42 mm (bar) Fjbust Sd Tco Ugp Ijpg Workpiece length: max. 160 mm Spindle clearance for bar machining: 42 mm Collet size: 173 E/ Spindle speed: max. 6,000 rpm Main drive power: 7.5 KW /11kW Travel X / Y / Z: 225 / 385 / 235 mm Travel Z1: 350 / 460 mm Rapid traverse in all axes: 20 m/min Driven tools: 11 tools, main spindle side Collet size: ER 20 Axial tools: 7 pieces Radial tools: 4 pieces Fixed tools: 16 pieces Shank size for external machining: 8 pieces / 20 x 20 mm Shank diameter for internal machining: 8 pieces / 25 mm MACHINE DETAILS Dimensions L X W X H: 3000 x 2100 x 1800 mm Weight: approx. 4,000 kg EQUIPMENT - Collets: Main spindle 20 pieces each Main spindle / counter spindle 20 pieces. - Drilling quills - Chip conveyor - Parts conveyor belt - Signal lamp

Condition: good (used), Year of construction: 2001, operating hours: 13,305 h, Functionality: fully functional, machine/vehicle number: 212.30.73.101, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, table width: 530 mm, table length: 850 mm, TECHNICAL DETAILS Switch-on time: 93,951 hours Operating time: 41,735 hours Spindle running time: 13,305 hours Total number of axes: 3 Control: Heidenhain iTNC 530 Table and axes Table length: 850 mm Table width: 530 mm Number of T-slots: 6 Distance between T-slots: 63 mm T-slot width: 14 mm Centering hole diameter: 30 mm Max. Workpiece weight on the table: 400 kg Longitudinal travel (X-axis): 600 mm Transverse travel (Y-axis): 450 mm Vertical travel (Z-axis): 450 mm Tool changer Number of tools: 30 Tool diameter max.: 90 mm Diameter with free secondary positions: 110 mm Maximum tool length: 250 mm Maximum tool weight: 6 kg Tool change time: 5 seconds Average chip-to-chip time: 7 seconds Tool holder: ISO 40 DIN 69871 Pull stud: DIN 69872 Form B Spindle speed Speed infinitely variable from: 50 rpm to: 12,000 rpm Work feed: 15 m/min Rapid traverse: 22 m/min Max. Feed force: 5,000 N Connections Compressed air connection: 6 bar Electrical connection: 400 V, 50 Hz, 3-phase Spindle power: 12 / 16 kW Total power requirement: 15 kW Noise level: 75 dB(A) Machine weight approx.: 6,500 kg Machine dimensions Fpjbusu Dncas Ugp Isg Length: 2,500 mm Width: 1,600 mm Height: 2,600 mm EQUIPMENT Water cooler Electronic handwheel Lighting Machine can be viewed assembled and, after consultation, can be energized for inspection.

Condition: as good as new (ex-display), Year of construction: 2023, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Control system: Control: Fanuc 0i-MFplus with Manual Guide i Travel paths: X-axis travel: 1,000 mm Fobu Ugpju N I S Ss Iepg Y-axis travel: 520 mm Z-axis travel: 610 mm Spindle: Spindle speed: 12,000 rpm (with direct drive) Tool changer: Tool changer positions: 32 Tool holder: SK 40 Cooling and handling systems: Coolant through the spindle: 20 bar Hinged belt chip conveyor: Yes Coolant and air gun: Yes Bed flushing: Yes

Year of construction: 2002, Condition: used, Functionality: fully functional, Horizontal machining center with double chain magazine. TECHNICAL DETAILS x-way: 600 mm y-way: 560 mm z-way: 560 mm control: Siemens Sinumerik 840D B - axis: 360 x 0,001 ° spindle speed - stepless: 8.000 rpm feed X/Y/Z/ axis: 1 - 60.000 mm/min feed B axis: 9.250 °/min rapid traverse X/Y/Z: 60.00 m/min feed force X/Z: 9.600 N Feed force Y: 8,000 N drive power 40 % ED: 20,00 KW driving power 100% ED: 13,00 kW Tool holder: SK40 Torque at 40% / 100% ED: 191 / 124 Nm Pallet size: 2x 400 x 500 mm workpiece weight: max. 600 kg tool magazine: 180 tool diameter: 90 mm tool diameter with 2 free places: 160 mm tool length: max. 350 mm Tool weight: max. 3.50 / 12.00 kg MACHINE DETAILS total power requirement: 65,00 kW Fpsbenh Rn Asu Ugp Ieg machine weight: approx. 16,00 t space requirement: approx. 9.00 x 4.50 x 3.50 m EQUIPMENT Coolant system with IKZ Double chain magazine with 180 places Chip conveyor BLUM tool laser measurement electronic handwheel

Condition: good (used), Year of construction: 2007, operating hours: 25,000 h, Functionality: fully functional, TECHNICAL DETAILS Turning diameter: max. 465 mm turning length: 1050 mm Rotation diameter: 680 mm Chuck diameter: 325 mm x-path: 300 mm z-path: 1,050 mm C-axis: 360° Control: Heidenhain Plus IT Speed range: max. 3,500 rpm Drive power: 33 kW Torque: max. 630 Nm Spindle bearing diameter: 120 mm Spindle bore: 100 mm Max. Bar diameter: 90 mm Tailstock travel: 850 mm Quill stroke: 150 mm Tailstock holder: MK 5 Rapid traverse X / Z: 30 m/min Fobuett Du Ne Ugp Ispg Number of tool positions: 12 positions Tool holder: VDI 40 Driven tool stations: 12 Speed of driven tools: max. 4,000 rpm Drive power of driven stations: 8.4 kW Torque: max. 20 Nm MACHINE DETAILS Total power requirement: 50 kVA Machine weight: 9,000 kg Space requirement: 6.5 x 3.0 x 2.2 m Spindle hours: 25,000 h

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, TECHNICAL DETAILS Press: Tecnopress KZP 40 Fjbuoul Sras Ugp Iopg Robot: ABB Robotics IRB4400 M97A Oven: Westofen WESTOMAT 90S MC Lubricator: Wollin PSM-324

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 1,000 h, Functionality: fully functional, machine/vehicle number: P16-5426-001, CONSTRUCTION - Degreasing zone - Finish zone - Filter system - Eurosorb circuit with mixer (powder container) - Electrical system with control panel - Pneumatics TECHNICAL DETAILS Material to be cleaned: sheet steel belts, perforated, various hole patterns Dimensions of the material / belt width: max. 1,250 mm Sheet thickness: 0.5 - 5 mm Cleaning speed: max. 10 m/min Degree of oiling: lightly oiled (< 0.5 g/m²) Coil surface: cold-rolled, clean Coils endless: Coil to coil is joined on the customer side without thickening MACHINE DETAILS Dimensions: approx. 3,300 x 2,000 x 2,000 mm (without filter and electrical engineering, without conveyor technology) Compressed air: > 6 bar dry and de-oiled, approx. 11 m³/min Febuetwn Nme Ugp Iepg Power: 400 V / 50 Hz; ~20kW Screed: Concrete for 10 N/mm² Flatness: on target circle 5.0 m ± 5 mm Noise level: ≤ 80 dB(A)

Condition: good (used), Year of construction: 2003, operating hours: 27,804 h, Functionality: fully functional, machine/vehicle number: 16165, travel distance X-axis: 915 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Machine type: Machining center Manufacturer: HERMLE Type: U 740 Control: HEIDENHAIN iTNC 530 Serial number: 16165 Year of manufacture: 2003 Production times Switch-on time: 86,672 hours Working time: 34,362 hours Spindle running time: 27,804 hours Axes and table Total number of axes: 5 Table length: 900 mm Table width: 500 mm Number of T-slots: 8 Distance between T-slots: 65 mm T-slot width: 14 mm Max. Workpiece weight on the table: 700 kg Longitudinal travel (X-axis): 915 mm Transverse travel (Y-axis): 500 mm Vertical travel (Z-axis): 500 mm Workpiece size max. Length: 900 mm Width: 500 mm Height: 500 mm Tool changer Number of tools: 16 Tool diameter max.: 125 mm Diameter with free secondary positions: 180 mm Maximum tool length: 300 mm Maximum tool weight: 6 kg Milling head Swivel range: -5° to +95° Tool holder: SK 40 Spindle Speed infinitely variable from: 20 rpm to: 12,000 rpm Feed rates Rapid traverse lengthwise: 30 m/min Rapid traverse: 30 m/min Vertical rapid traverse: 20 m/min Connections and power Compressed air connection: 6 bar Electrical connection: 400 V, 50 Hz, 3-phase Spindle power: 32 kW Total power requirement: 26 kVA Noise level: 78 dB(A) Fsbeu Dniteu Ugp Iopg Dimensions and weight Machine weight approx.: 7,300 kg Dimensions (L x W x H): 2,760 mm x 2,390 mm x 2,370 mm EQUIPMENT Three-jaw chuck Ø 200 mm Workpiece probe: HEIDENHAIN TS 640 Dividing head 4th axis: HOFMANN, type RW/NC-160 Rinsing gun RS 232 interface Ethernet interface Control cabinet Air conditioning unit Machine can be inspected assembled and energized for inspection after consultation.

Condition: good (used), Year of construction: 2016, operating hours: 13,701 h, Functionality: fully functional, machine/vehicle number: 276209, turning diameter: 255 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 1,125 mm, swing diameter over bed slide: 660 mm, TECHNICAL DETAILS Chuck size: 10 inch Maximum swing circle: max. 660 mm Standard turning diameter: max. 255 mm Maximum turning diameter: max. 360 mm Largest bar passage: max. Ø 80 mm Distance between spindle nose and turret edge: 59.5 - 1,179.5 mm Maximum weight (bar work): max. 500 kg Maximum weight (chuck work): max. 450 kg Spindle Speed: 35 - 4,000 rpm Shape of spindle nose: JIS A2-8 Spindle bore: Ø 91 mm Acceleration time: 2.3 s Motor power (30-minute power/continuous power): 26/22 kW Maximum torque (15%ED): 465 Nm Tailstock Fsbu Ugpeu Tdi Eo Ijpg Quill type: MT No 4 Movement stroke (tailstock body): max. 1,075 mm Minimum and maximum thrust: min. 1,000 N, max. 5,000 N Tools and turrets Number of tools: 12 pieces Outer chisel tool sizes: max. Ø 25 mm Internal turning tool sizes: max. Ø 40 mm Tool sizes router bits: max. Ø 20 mm Tool sizes end mills: max. Ø 20 mm Tool sizes for milling taps: max. M20 (3/4 UNI) × 2.5 mm Turret Switching time (next/opposite position): 0.23/0.62 s Milling spindle motor power (40%ED/continuous power): 5.5/3.7 kW Milling spindle speed: max. 6,000 rpm Maximum torque of the milling spindle (40%ED): max. 47 Nm Feed axes Rapid traverse X/Z: max. 30/33 m/min Time constant X/Z: 65/80 ms Travel range X: max. 225 [220 + 5] mm Travel range Z: max. 1,125 [1,120 + 5] mm MACHINE DETAILS Spindle center height: 1,020 mm Overall length: 3,385 mm Overall width: 1,720 mm Total height: 1,820 mm Space requirement: 5.82 m² Mass of the machine: 6,050 kg Mass of the machine (with steady rest): 6,250 kg Connected load: 44.5 kVA Voltage: 400 V Coolant tank volume: 270/315 l Machine package: 3.87 x 2.16 x 2.01 m, 6.62 t Chip conveyor package: 3.54 x 0.87 x 1.35 m, 325 t

Condition: ready for operation (used), Year of construction: 2011, operating hours: 12,748 h, Functionality: fully functional, punching force: 22 t, workpiece length (max.): 1,550 mm, workpiece width (max.): 3,050 mm, sheet thickness (max.): 8 mm, No reserve price - guaranteed knockdown to the highest bidder at the end of the auction! Trumpf TruMatic 7000 - 1600 (large format) with additional equipment and automation AUTOMATION - SheetMaster with peeling system including positioning aids for large format + first additional package with 9 suction cups, incl. vacuum ejector - Unloading monitoring - GripMaster large format - SortMaster pallet sorting function on four pallets TECHNICAL DETAILS Control system: TRUMPF Rexroth IndraMotion MTX Punching work area: 3,050 x 1,550 mm Laser working area: 3,050 x 1,550 mm Combined working area: 2,500 x 1,550 mm Control system: Siemens Sinumerik 840 D Laser power: 3,200 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN Active blank holder: 4.5 - 20 kN Linear magazine: 21 tools with 4 clamps Programmable chute: 500 x 500 mm Positioning speed X / Y / simultaneous: 100 / 60 / 116 m/min C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 1200 rpm Stroke sequence marking: 2800 1/min Position deviation: ± 0.10 mm Position spread: ± 0.03 mm MACHINE DETAILS Length: approx. 10.5 m Width: approx. 9 m Height: 2.5 m Blasting time/laser switch-on time: 12,748 h Machine switch-on time: 87,844 h Operating voltage: 400 V / 50 Hz Compressed air connection: 7 ± 1 bar Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h EQUIPMENT - Sturdy, easily accessible C-frame - Drives with maintenance-free three-phase motors - Foot pedal clamp closing - Ball tables - TASC 3 laser control - Jet pipe ventilation with compressed air - FastLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine Fobueuhygpj Ugp Ijpg - FlyLine - PlasmaLine - Additional Xp and Yp axes - Electro-hydraulic punching head - Rotatable mono tool holder ADDITIONAL EQUIPMENT - TruFlow 3200 laser incl. LensLine and optimized standby - MultiTool function - Thread forming function - Marking/quick beading function - Engraving function - Deburring and rolling technology function - Active die - Spray lubrication Die incl. progr. lubricant container with level monitoring - Repositioning cylinder - Vibration-damped installation - Chip conveyor with tilting container - Brush tables with loading and unloading aid - Blow-out device for small parts

Condition: used, Year of construction: 2016, Functionality: fully functional, machine/vehicle number: BF15103648, TECHNICAL DETAILS WORKING RANGE Travel in X/Y/Z: 160 /+40/-30 / 510 mm Bar passage: max. 45 (51) mm Turning diameter: max. 300 mm Rotation diameter over bed 430 mm Rapid traverse speed X/Y/Z 30 / 15 / 45 m/min MAIN SPINDLE Speed: max. 7000 rpm Drive power: max. 15 kW Torque: max. 100 Nm COUNTERSPINDLE Speed: max. 7000 rpm Drive power: max. 15 kW Torque: max. 100 Nm TOOL TURRET 1 VDI size: VDI 25 Number of tool positions: 12 Fpobu Ugpott D Ado Isg Driven tools: 12 Speed: max. 6000 rpm Drive power: max. 4 kW Torque: max. 16 Nm TOOL TURRET 2 VDI size: VDI 25 Number of tools: 12 Of which driven: 12 Speed: max. 6000 rpm Drive power: max. 4 kW Torque: max. 16 Nm EQUIPMENT - Chip conveyor - Parts catcher - Accessories shown

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, TECHNICAL DETAILS Fjbu Uoul Sl Togp Ijpg Press: Tecnopress KZP 40 Robot: ABB Robotics IRB4400 M97A Oven: Striko Westofen W 900SL ProDos Lubricator: Wollin PSM-336

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 211431, pressing force: 135 t, bending length: 3,050 mm, power: 11 kW (14.96 HP), No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Working length: 3,050 mm Pressing force: 1,350 kN Oil quantity: 250 l Control type: DNC 1200 HP Fpsbujvw Arfs Ugp Iog MACHINE DETAILS Current type: 3~ Frequency: 50 Hz Operating voltage: 400 V Control voltage: DC 24 V Rated current: 63 A Rated current of the main fuse: 34 A Power of the main motor: 11 kW Electrical circuit diagram no.: 150.276

Condition: good (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 07577, travel distance X-axis: 510 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 460 mm, controller manufacturer: Fanuc, controller model: Series 16i-MB, workpiece length (max.): 510 mm, workpiece width (max.): 355 mm, workpiece height (max.): 460 mm, TECHNICAL DETAILS Machine type: 4-axis machining center Manufacturer: KITAMURA Type: MyCenter-2XiF Control: FANUC Series 16i-MB Serial number: 07577 Year of manufacture: 2004 Axes and table Total number of axes: 4 Table length: 900 mm Table width: 355 mm Number of T-slots: 3 Distance between T-slots: 110 mm T-slot width: 14 mm Max. Workpiece weight on the table: 240 kg Longitudinal travel (X-axis): 510 mm Transverse travel (Y-axis): 355 mm Vertical travel (Z-axis): 460 mm Workpiece size max. Length: 510 mm Width: 355 mm Height: 460 mm Tool changer Number of tools: 24 Maximum tool diameter: 80 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Tool holder: BT 40 Distance between spindle nose and table: 160 - 620 mm Spindle Speed infinitely variable from: 0 rpm to: 10,000 rpm Feed rates Feed speed: 0 - 36,000 mm/min Rapid traverse lengthwise: 50 m/min Rapid traverse: 50 m/min Vertical rapid traverse: 36 m/min Power data Total power requirement: 25 kVA Dimensions and weight Machine weight approx.: 4,400 kg Dimensions (L x W x H): 2,565 mm x 2,470 mm x 3,000 mm EQUIPMENT Fjbsu Dngrou Ugp Iopg Vice: 2 pieces Vice jaw width: 145 mm Coolant device Dividing head 4th axis: NIKKEN CNC202 Machine can be inspected assembled and can be energized for inspection after consultation.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,487 h, Functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 560 mm, rotational speed (max.): 18,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Number of axes: 3 Control: HEIDENHAIN iTNC530 X-travel: 1,200 mm Y-travel: 800 mm Z-travel: 560 mm Table size: 1,200 x 850 mm Max. weight on the table: 1,800 kg Spindle Spindle speed: max. 18,000 rpm Spindle holder: HSK63 Feed rate Rapid traverse speed: 90 m/min Tool changer Fpjbu Ugsu U Egzsp Iog Tool changer (ATC): 30 positions MACHINE DETAILS Hours under power: 30,790 h Hours in production: 19,487 h EQUIPMENT - Chip conveyor - Approx. 50 HSK63 tool holders - Complete documentation

Condition: good (used), Year of construction: 1997, operating hours: 1,564 h, Functionality: fully functional, machine/vehicle number: 7015, travel distance X-axis: 1,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, controller manufacturer: Heidenhain, controller model: TNC 426, table width: 700 mm, table length: 1,150 mm, rotational speed (max.): 24,000 rpm, TECHNICAL DETAILS Machine type: 4-axis machining center Manufacturer: MIKRON Type: VCP 1000 Control: HEIDENHAIN TNC 426 Serial number: 7015 Year of manufacture: 1997 Operating times Switch-on time: 21,859 hours Operating time: 7,308 hours Spindle running time: 1,564 hours Axes and table Total number of axes: 4 Table length: 1,150 mm Table width: 700 mm Turret stations: 60 Longitudinal travel (X-axis): 1,000 mm Transverse travel (Y-axis): 750 mm Fpobu Ueu Dngfegp Iog Vertical travel (Z-axis): 750 mm Tool changer Type: TC 30 Number of tools: 30 Tool diameter max.: 77 mm Diameter with free secondary positions: 115 mm Maximum tool length: 305 mm Tool holder: HSK A63 Distance between vertical spindle and table: 115 mm Spindle Speed infinitely variable up to: 24,000 rpm Feed rates Feed speed: 1,500 mm/min Rapid traverse: 22 m/min Connections and power Connection: 400 V, 50 Hz, 3-phase Total power requirement: 40 kW Dimensions and weight Machine weight approx.: 10,500 kg Dimensions (L x W x H): 5,220 mm x 3,100 mm x 2,840 mm EQUIPMENT Tool changer with 30 tools Coolant through the spindle (IKZ) Chip conveyor Dividing head 4th axis Set of tool holders: 45 pieces Tool cabinet: LISTA Remark: Few spindle hours, spindle has been replaced Machine can be inspected assembled and can be energized for inspection after consultation.

Condition: good (used), Year of construction: 2002, operating hours: 16,516 h, Functionality: fully functional, machine/vehicle number: 107.84.00.070, travel distance X-axis: 400 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530 M, rotational speed (max.): 42,000 rpm, TECHNICAL DETAILS Machine type: High-speed center Manufacturer: MIKRON Type: HSM 400 Control: HEIDENHAIN iTNC 530 M Serial number: 107.84.00.070 Year of manufacture: 2002 Cycle times Switch-on time: 25,671 hours Operating time: 22,211 hours Working time: 10,475 hours Spindle running time: 16,516 hours Axes and table Total number of axes: 3 Number of spindles: 1 Max. Workpiece weight on the table: 200 kg Longitudinal travel (X-axis): 400 mm Transverse travel (Y-axis): 450 mm Vertical travel (Z-axis): 350 mm Pallet changing device Quantity: 10 Length: 240 mm Width: 240 mm Tool changer Number of tools: 36 Tool change time: 10 seconds Average chip-to-chip time: 12.5 seconds Tool holder: HSK E40 Fpsbu Ugpou Dndkj Ieg Spindle Speed infinitely variable from: 100 rpm to: 42,000 rpm Feed rates Work feed: 1-40 m/min X-axis: 0-40 m/min Y-axis: 0-40 m/min Z-axis: 0-40 m/min Rapid traverse: 42 m/min Connections and power Connection: 400 V, 50 Hz, 3-phase Spindle motor power: 12.5 kW Noise level: 75 dB(A) Dimensions and weight Machine weight approx.: 6,500 kg Dimensions (L x W x H): 2,100 mm x 2,400 mm EQUIPMENT Set of tool holders (without tools) Set of collets Water cooler (manufacturer: BURN) Infrared measuring probe (manufacturer: m&h) Tool breakage control (manufacturer: BLUM) Chip conveyor Electronic handwheel Lighting system Hot air shrink unit (manufacturer: HOT SHOT) Machine can be inspected assembled and energized for inspection after consultation.

Condition: good (used), Year of construction: 1996, Functionality: fully functional, machine/vehicle number: 5.49.10.07, feed length X-axis: 15,000 mm, feed length Y-axis: 15,000 mm, travel distance X-axis: 710 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, table width: 600 mm, table length: 1,200 mm, TECHNICAL DETAILS Machine type: CNC milling machine Manufacturer: MIKRON Type: UMS 710 Control: HEIDENHAIN TNC 426 Serial number: 5.49.10.07 Year of manufacture: 1996 Table and axes Table length: 1,200 mm Fjbou Dnarou Ugp Ijpg Table width: 600 mm Longitudinal travel (X-axis): 710 mm Transverse movement (Y-axis): 630 mm Vertical travel (Z-axis): 500 mm Spindle Spindle speed up to: 6,300 rpm (42,000* rpm with high-frequency spindle) Tool changer Number of tools: 20 Feed rates Longitudinal: 0 mm/min to 15,000 mm/min Transverse: 0 mm/min to 15,000 mm/min Vertical: 0 mm/min Milling spindle motor Power: 11 kW Weight and dimensions Machine weight: approx. 4,690 kg Dimensions (L x W x H): 4,700 mm x 2,100 mm x 2,700 mm EQUIPMENT Rigid angled table High-frequency spindle with 42,000 rpm (make: FISCHER) Set of tool holders Coolant / mist extraction system (make: FIBARON) Machine can be inspected assembled and energized for inspection after consultation.