Second-hand machinery for sale (2,399)

Condition: ready for operation (used), Year of construction: 2016, Functionality: fully functional, pressure: 11.1 bar, operating pressure: 6 bar, temperature: 102 °C, TECHNICAL DETAILS Design: three-pass design for low-NOx operation Installation: inside Altitude: 400 m Feed water reference temperature: 102 °C Gross steam output: max. 820 kg/h Nominal boiler output: 530 kW Operating pressure: max. 6 bar Test pressure: 11.1 bar Operating pressure: approx. 3 bar Exhaust gas loss with Eco Gas/Oil: max. 7.4/6.8 mbar Exhaust gas temperature after Eco: 119 °C Boiler efficiency with Eco: 95.2% Contents Dolqvajvr Tkuolgeut Total water volume: 3.25 m³ Water volume up to NW with Eco 200: 2.50 m³ Average working range: 2.47 m³ Steam water volume: 0.70 m³ Feed water volume: 2.45 m³ MACHINE DETAILS Mains voltage: 3 x 400 V 50 Hz Boiler length: 3,640 mm Boiler width: approx. 1,700 mm Boiler height (incl. Eco 200): 3,760 mm Flame tube diameter: 556 mm Flame tube length: 2,100 mm Weights Transport weight: approx. 3.5 t Operating weight (pressure test): approx. 6.75 t Nominal connection diameters on the boiler Main steam: DN/PN 80/16 Safety valve: DN/PN 25/40 Feed water: DN/PN 25/40 Blowdown: DN/PN 25/40 Ventilation: DN/PN 15/40 Flue gas connection outside/inside: DN/PN 224/216

Year of construction: 2007, Condition: good (used), Functionality: fully functional, machine/vehicle number: 203 / 232, HIGHLIGHTS - cost-reduced ECO model - with effective and gentle HELICAL washing system - HELICAL washing system makes the machine versatile and space-saving - reduced water consumption with perfect washing results - optimal separation of foreign bodies - for example sand, stones and insects - continuous washing process - with automatic filling no operator necessary - washing, disinfection, mixing and rinsing possible in one machine - usable for e.g. lettuce, vegetables, herbs and fruit, both for cut and whole products - ideal accessibility for cleaning and maintenance TECHNICAL DETAILS capacity: 1800 kg/h inlet height: 1103 mm Outlet height: 771 mm Water tank: 785 l Djlonl Dzxsqvalgsut Water outlet: 2 x 2". Fresh water connection: 2 x 3/4 inch (GEKA coupling) MACHINE DETAILS power: 5,7 kW voltage: 3 ~ 400 V; N/PE dimensions: 3807 x 991 x 1500 mm weight: 583 kg

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, HIGHLIGHTS - With manufacturer's warranty - Single-layer single chamber; flexible working mode with several modes to choose from - Highly efficient cleaning system - Intelligent control mode - Energy-saving design - Standard industrial control mode, automatic PLC processing, touch screen operation - Intelligent PID temperature control, high precision and interference protection TECHNICAL DETAILS Panel coating size: 7,800 × 2,400 mm Chamber opening height: maintenance 300 mm / continuous 100 mm Coating chamber height: 25 mm Average conveyor speed: 8 - 16 m/min Working height in conjunction with the assembly line: 1150 ± 10 mm Control mode: Touchscreen control Temperature control: PLC Intelligent Heating mode: Oil heating Temperature consistency: ± 1.5 ℃ Temperature accuracy: ± 1 ℃ Temperature range: room temperature - 160 ℃ Vacuum pumping speed: 600 l/s Compressed air flow rate: max. 600 l/min Compressed air pressure: 0.6 - 0.8 MPa MACHINE DETAILS Dimensions: 24,700 × 3,410 × 1,850 mm Weight: 25 tons Power supply: 380 V, 50Hz; 3 phases; 5 lines Total output: 108 kW Dslqstqnq Ujvalgjut Running power: 46 kW DESCRIPTION - The machine is heated by heat transfer oil to increase the temperature uniformity, temperature control accuracy and integrated performance, and improve the overall compatibility of the equipment. - Individual chambers, loading conveyors and unloading conveyors run together for high quality modules and a high degree of automation. - Stable and continuous loading and unloading device. Variable frequency conveying system, accurate position and conveying speed is adjustable. - Intelligent control, PLC automatic processing, touch screen operation and display function. - Upper and lower chambers of the coating chamber are equipped with PTFE Teflon sheet (cleaning system available) - For optimal gas flow conditions, the entire vacuum system is uniformly arranged so that gas suction and release is uniform and stable in all chambers. - The entire system is controlled by a solenoid valve and PLC, is operated and data displayed via a touch screen, and is equipped with a vacuum pressure sensor that displays and monitors the vacuum in the chamber in real time. - The entire heating system of the heating plate is designed and arranged according to the optimal conditions of fluid mechanics and heat transfer theory to ensure temperature uniformity, reduce pressure and reduce energy consumption.

Condition: used, Functionality: fully functional, Year of construction: 1998, operating hours: 9,653 h, TECHNICAL DETAILS Load capacity: 18000kg Load center of gravity: 600 Lifting height: 3660mm Free lift: 805mm Length: 3800mm Overall width: 1770mm Overall height: 3400mm Dead weight: 22500kg Mast type: Standard Fork length: 1800mm Duelqvaetrfrfolgst MACHINE DETAILS Transmission: Hydrostat Engine: Perkins Front tires type: Bandages Rear tires type: Bandages

Condition: refurbished (used), Year of construction: 2021, Functionality: fully functional, Complete debarking line - Completely overhauled Cambio 45 debarking system incl. feed and metal detector. Feeder Shard finder Debarker Conveyor Dolqvaljuv Echogout Etc.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 8,921 h, Functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,320 mm, controller manufacturer: Siemens, controller model: 840D sl, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 96, swivel angle B-axis (max.): 360 °, Equipment: chip conveyor, documentation/manual, CONDITION - Fully equipped machine including boring head D'Andrea with new price of 40 TEUR - Retrofit with new Siemens 840D sl 2018 control system - Milling spindle replaced in 2019 - Milling head changer completely overhauled in 2021 - Switch-on time: 30,805 h - Current spindle time: 8,900 h Provision: EXW - mediation to partner for dismantling and loading possible, costs approx. 25 - 35 kEUR TECHNICAL DETAILS Control system: Siemens 840D sl X-axis: 1,600 mm Y-axis: 1,250 mm Z-axis: 1,320 mm B-axis: 360° / resolution 0.0001 Speed range: 50 - 12,000 rpm Pallet changer: 2 x 1,000 x 1,000 mm Workpiece diameter: 1,680 mm Table load: 4,000 kg Milling head changer: De Adrea boring head (overhauled in 2021) Feed speed in all axes: 20,000 mm/min Tool holder: HSK100 Spindle power: 30 kW Number of places: 96 pieces MACHINE DETAILS Dimensions: 10,000 x 9,000 x 4,100 mm Weight: 31,000 kg EQUIPMENT - De Andrea unscrewing head UT3 400S - Infrared tester - Oil mist extraction - Rotoclear inspection window - Manual rinsing gun - 1 clamping angle - Machine documentation - Automatic cone cleaning in the magazine area - Coolant outside with 3 nozzles: 6 bar Dujlouhx Ekjqvalget - Coolant inside: 40 bar - Internal air: 40 bar - Paper belt filter: yes - Chip conveyor: yes - Bed flushing: yes

Year of construction: 2014, Condition: excellent (used), Functionality: fully functional, Foundry electric induction melting furnace for melting of: - Steel - iron - aluminum - copper - brass - Bronze TECHNICAL DETAILS Nominal power: 1 ton Temperature: 1700 °C Transformer capacity: KVA 800 Dslqvaolxnlfolgout Year of manufacture transformer: 2014 High voltage: 10 +- 2 x 2,5% kV current: 41,86 / 38,97 - 23,89 A Low voltage: 840 - 105 V Current: 464 - 275 A EQUIPMENT / SCOPE OF DELIVERY Hydraulic tilting Water cooling system

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 2,610 mm, travel distance Z-axis: 500 mm, number of slots in tool magazine: 32, TECHNICAL DETAILS Dolsvwc Iyoqvalgsut Machine type: 6-axis plastic machining center Milling motor: 1 piece, 5-axis Sixth axis: Part plate (lathe) Control: OSAI with PC Working area: 1,300 x 2,610 mm Z-usable working height: 500 mm Vector speed: 85 m/min Table dimensions: 2,000 x 1,000 mm Tool change: 2 automatic tool changers Number of tool positions: 2 x 12 + 8 Holder: HSK F63

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, TECHNICAL DETAILS X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 450 mm XYZ positioning resolution: 0.001 mm XYZ measuring resolution: 0.0005 mm Spindle-to-table distance: 150 - 600 mm Collision protection: X, Y, Z Axis speed: 0 to 900 mm/min Max. workpiece size (L × W × H): 1,000 × 700 × 370 mm Max. workpiece weight: 1,000 kg Max. electrode weight: 100 kg Clamping table dimensions: 700 × 500 mm Duolqvaev Tp Edjlget Number of T-slots: 4 Dielectric system Filters: 6 paper filters Dielectric volume: 500 l Heat exchanger: Standard Filter change during machining: Standard Filling pump flow rate: 200 l/min Flushing Flushing via electrode: 1 × Flushing through the workpiece: 1 × Lateral rinsing: 2 × Extraction: 1 × Generator Max. machining current: 64 A Power consumption: 5 kVA Best achievable surface finish: CH 12 / Ra 0.4 µm Polishing option: CH 0 / Ra 0.1 µm Suitable technologies for: Copper / steel, graphite / steel, copper-tungsten / hard metal MACHINE DETAILS Machine dimensions (L × W × H): 2,300 × 1,570 × 2,900 mm Transport height: 2,370 mm Total weight (including reservoir): 3,600 kg EQUIPMENT - Linear glass scales on all axes - Collision protection on all axes - Standard heat exchanger and filter system - Various rinsing options with extraction - Technology compatibility for copper, graphite, and tungsten carbide - Optional polishing function with 0.1 µm roughness

Year of construction: 1991, Condition: good (used), Functionality: fully functional, Newly sharpened knives! TECHNICAL DETAILS Delqvaeizwrpelgout Cutting length: 3.100 mm Max. Sheet thickness (steel): 13 mm Overhang in the side stand: 75 mm Cutting angle: 0,5 - 4°. Engine power: 18,5 kW MACHINE DETAILS dimensions: 4.200 x 2.700 x 2.010 mm Weight: 10.800 kg EQUIPMENT - splitter guide - with backgauge operable from the front with mech. counter 1.200 mm range - stepless centrally adjustable cutting gap setting by means of handwheel - cutting line illumination - 2 support arms - foot pedal - balls in table - single and continuous stroke (with adjustable delay time) - sensitive aut. cutting length adjustment - push-through time adjustable up to 2 s - 15 pieces hydraulic hold downs - operating instructions in german width for transport with dismounted backgauge 1.750 mm

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, table height: 400 mm, pressing force: 500 t, table width: 5,500 mm, table length: 3,000 mm, TECHNICAL DETAILS Duelsu Iy Trjqvalgst capacities Maximum force: 500 t Restoring force: 200 t Table dimensions: 5,500 x 3,000 mm Table stroke: 3,500 mm Table height above floor: 400 mm Extension speed of the table: 60 - 80 mm/s Stroke of the carriage: 1,800 mm Daylight opening: 2,000 mm Cushion dimensions: 3,960 x 1,860 mm Stroke of the upper cushion stop: 180 mm Cushion force: 100 t Fast return: 35 mm/s Electrical power: 380 V, 50 Hz Output: 59 kW EQUIPMENT PLC Siemens Bolster table with dimensions of 5,500 x 3,000 mm Cooling in the control cabinet CE marking

Year of construction: 2001, operating hours: 27,046 h, Condition: excellent (used), Functionality: fully functional, CNC travelling column milling machine in cast design Highly stable design thanks to 3-fold guided X-axis and fixed table Machine is provided EXW TECHNICAL DETAILS X-axis (longitudinal) linear guide: 5,300 mm (3-fold) Y-axis (transverse) linear guide: 1,000 mm (2-fold) Z-axis (vertical) flat guide: 1,500 mm (2-fold) Speed range: 60 to 3,000 min-1 Tool holder: SK 50 tool changer: 40-fold Tightening bolt: DIN 69872-B Driving power: 30 kW tool dimensions: max. L=350mm / DM=200mm table dimensions: 6000x1000mm Heidenhain control: TNC426 with color screen and handwheel rapid traverse X, Y, Z axis: 10.000 mm/min clamping surface: 6.000 x 1.000mm T-slots: 22 H12 / distance 130mm Central T-slot: 22 H7 Djlqvaljlhqkhsgout MACHINE DETAILS Duty cycle: 62,774 hours (as of 11/2022) Coolant outside: 1,1KW with 50l/min. Machine weight: 43.000kg EQUIPMENT - Electric handwheel Heidenhain - Pendulum machining function monitored with light barriers - New X-axis covers - Chip conveyor 2-fold - New milling head bearing 2021 - Operating manual / Documentation CONDITION - Service and maintenance work has been carried out - Geometry in order - Suitable for pendulum machining Machine available from July-August

Condition: excellent (used), Year of construction: 2007, operating hours: 7,673 h, Functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, controller model: 530 iTNC, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 10, swivel angle B-axis (max.): 180 °, Machine with additional equipment DESCRIPTION Sturdy 4-axis machine, specially developed for tool, mold and die making 4-sided machining through the use of a rotary table Closed design of the double beam and cross slide with internal, all-round guided slide milling unit (box-in-box design) Vertical gantry design for controlled dynamics and accuracy Consistently good milling results thanks to load- and thermo-symmetrical design Stationary workpiece for consistently good surface quality High productivity thanks to roughing and finishing in a single clamping operation Perfect chip removal, especially for deep contours TECHNICAL DETAILS Control: Heidenhain 530 iTNC X-axis: 1,600 mm Y-axis: 1,200 mm Z-axis: 800 mm B-axis: ± 180° Speed: 10000 rpm Milling head: Integrated fork milling head with HSK 100 main spindle Power (S1/100%): 25 kW Torque (S1/100%): 200 Nm Tool holder: HSK - A100 Diameter of front spindle bearing: 100 mm Table top size: 1,600 x 1,600 Workpiece weight: 10,000 kg Duolqvastzy Izolgjt Travel speeds: 30,000 mm/min Axis accelerations: 2.5 m/s² Automatic tool changer: 10 tool positions MACHINE DETAILS Cooling: IKZ Chip disposal: available Machine weight: 38,000 kg Dimensions: approx. 7 x 8.5 x 3.5 m EQUIPMENT - Cooling system - Chip disposal

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 2200-12-04, product height (max.): 300 mm, product length (min.): 300 mm, product width (max.): 1,100 mm, product width (min.): 300 mm, TECHNICAL DETAILS Width to be packed: 300 mm to 1,100 mm Maximum height: 300 mm Minimum length: 300 mm MACHINE DETAILS Total length of the system: 10,650 mm Delqvaovwc A Rjlgeut

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 680221, workpiece weight (max.): 1,000 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 250 mm U-axis travel: ± 30 mm V-axis travel: ± 30 mm Taper pitch/height: ±15° / 110 mm Working area Table dimensions: 820 × 610 mm Max. workpiece size: 980 × 730 × 250 mm Max. workpiece weight: 1,000 kg Tank volume: 250 l Wire EDM system Wire EDM diameter: 0.25 mm Programmable wire tension: 0.3 to 3 daN Automatic wire threading for wire diameters: 0.10 / 0.20 / 0.25 / 0.30 mm Dielectric Paper filter: 2 cartridges Dielectric temperature: ± 1 °C Dolqvaev Tp Apslgout Volume of ion exchange resins: 20 l Max. injection pressure: 4-stage programmable Tank volume: 1,200 l MACHINE DETAILS Dimensions (W × D × H): 1,950 × 2,550 × 2,000 mm Weight without dielectric: 3,250 kg Input voltage: 380 / 400 V Total installed power: 10 kVA Surface roughness: 0.28 µm EQUIPMENT - Linear scales on all axes - Closed wireless diamond guides with zero backlash - Programmable injection pressure with 4 stages - Windows NT-based control with PC keyboard and touchscreen

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Working area: 3,680 x 1,260 x 150 mm Milling motor: 1 piece, 8.5 kW (11.5 HP) Dslqvevwczgealgeut Tool changer: 1 automatic rotary gearbox with 12 positions Drilling comb: 18 vertical, 8 horizontal holes and 1 "X" saw drill Vacuum pump: 250 m³/h Software: DXF compatible Safety standard: BUMPER protection, CE standards Weight: 3,000 kg

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 194604, workpiece weight (max.): 800 kg, travel distance X-axis: 628 mm, travel distance Y-axis: 398 mm, travel distance Z-axis: 162 mm, TECHNICAL DETAILS X-axis travel: 628 mm Y-axis travel: 398 mm Z-axis travel: 162 mm U-axis travel: ± 48 mm V-axis travel: ± 48 mm Cutting speed: max. 711 mm/h Working area Djljv Tpulsqvalgout Workpiece size (W × D × H): 1,350 × 688 × 361 mm Max. workpiece weight: 800 kg Cone pitch/height: ± 30° / 67 mm Axis measurement: linear glass measuring rod Wire EDM system Wire guides: 0.10 mm and 0.25 mm Permissible coil weights: 4 to 8 kg Dielectric Number of filter cartridges: 16 Units Tank volume: 1,003 l MACHINE DETAILS Weight (with dielectric): 5,200 kg Input voltage: 380/400 V (three-phase alternating current) Power consumption: total: 12 kVA Installation dimensions: approx. 4.3 x 1.3 m EQUIPMENT - Linear scales on all axes - Collision protection on the U, V, and Z axes - Automatic wire threading and rethreading - CAM-CT for path programming - CT-EXPERT for generator optimization - PROFIL-EXPERT for geometry-dependent cutting strategies - DIN-compliant wire spool holder

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 3,685 mm, travel distance Y-axis: 1,290 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Working area: 3,685 x 1,290 x 150 mm Milling machine: 1 electrospindle, 16 HP, HSK-F63 Tool changer: 1 automatic rotary gearbox with 18 positions Djlqsvwcyisvalgsut Drilling comb: 14 vertical and 6 horizontal holes Lubrication: automatic central lubrication system Vacuum pump: 1 piece, 250 m³/h Software: BIESSE WORKS Standards: CE standard

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 124322, workpiece weight (max.): 500 kg, travel distance X-axis: 318 mm, travel distance Y-axis: 218 mm, travel distance Z-axis: 114 mm, TECHNICAL DETAILS X-axis travel: 318 mm Y-axis travel: 218 mm Z-axis travel: 114 mm U-axis travel: ± 48 mm V-axis travel: ± 48 mm Control system: PC-based, 14" color monitor, MS-DOS Tap pitch/height: ±30° / 65 mm Working area Type: Tray with swing door Max. workpiece dimensions (W × D × H): 1,130 × 510 × 260 mm Door width: 1,010 mm Max. workpiece weight: 500 kg Table dimensions (W × D): 560 × 440 mm Distance from floor to table: 1,050 mm Volume of the Dielectric capacity: 240 l Dielectric level control: Automatic Wire EDM system Wire diameter: 0.10 – 0.25 mm Wire guide type: Diamond-enclosed guide, zero backlash Programmable wire unwinding speed: 0.2 to 15 m/min Dujlqvalov Tpnrogjt Programmable wire tension: 0.3 to 3 daN Permissible spool weight and type (according to DIN): 1.6 kg Permissible spool weight and type (according to JIS): 3 kg Used wire recycling: Wire shredding at the rear Automatic threading for wire diameters: 0.050 to 0.300 mm Automatic rethreading for wire diameters: 0.070 to 0.300 mm Minimum threading hole diameter: 0.300 mm for 0.250 mm wire Dielectric Type: Deionized Water Total dielectric volume: 900 l Dielectric temperature: ±0.5 °C Cartridge filters: 16 Deionization resin volume: 30 l Deionization control: Automatic Number of deionization bottles: 3 Injection pressure range: 0 – 20 bar Number of programmable pressure levels: 16 Generator Max. processing speed (material: steel, wire: SW30X): 300 mm²/min Min. surface roughness (material: steel, height: 20 mm): 0.12 µm Ra Min. surface roughness (material: carbide, height: 20 mm): 0.1 µm Ra Available technologies: Steel, carbide, copper, graphite, aluminum, PCD, copper-tungsten MACHINE DETAILS Machine dimensions (L × W × H): 3,690 × 2,520 × 2,290 mm Weight (without dielectric): 4,400 kg Input voltage: 380/400 V Power consumption: 12 kVA

Condition: good (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 3,670 mm, travel distance Y-axis: 1,860 mm, travel distance Z-axis: 350 mm, TECHNICAL DETAILS Table dimensions: 3,670 x 1,860 mm X-axis: 3,670 mm Y-axis: 1,860 mm Z-axis: 350 mm Drilling head: BH 22L Vacuum pump: 3 pieces, 300 m³ Location system: automatic location system Software: updated to Biesse Works Advanced Safety standard: CE safety Dueljvwcwbjqvalgjt

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 448 mm, travel distance Y-axis: 318 mm, travel distance Z-axis: 158 mm, TECHNICAL DETAILS X-axis travel: 448 mm Y-axis travel: 318 mm Z-axis travel: 158 mm U-axis travel: ± 48 mm V-axis travel: ± 48 mm Workpiece height: max.: 360 mm Workpiece dimensions (W × D × H): 1,150 × 726 × 360 mm Workpiece weight: max.: 800 kg Wire EDM system Wire diameter: 0.10 – 0.25 mm Wire guide type: Diamond-enclosed guide, zero backlash Programmable wire unwinding speed: 0.2 to 15 m/min Programmable wire tension: 0.3 to 3 daN Permissible spool weight and type (according to DIN): 1.6 kg Permissible spool weight and type (according to JIS): 3 kg Used wire recovery: Wire shredding at the rear Automatic threading for wire diameters: 0.050 to 0.300 mm Automatic rethreading for wire diameters: 0.070 to 0.300 mm Minimum threading hole diameter: 0.300 mm for 0.250 mm wire Dielectric Delqov Tn Udjvalgeut Type: Deionized water Total dielectric volume: 900 l Dielectric temperature: ±0.5 °C Cartridge filters: 16 Deionization resin filling volume: 30 l Deionization control: Automatic Number of deionization bottles: 3 Injection pressure range: 0 – 20 bar Number of programmable pressure levels: 16 Generator Max. Machining speed (material: steel, wire: SW30X): 300 mm²/min Min. surface roughness (material: steel, height: 20 mm): 0.12 µm Ra Min. surface roughness (material: carbide, height: 20 mm): 0.1 µm Ra Available technologies: steel, carbide, copper, graphite, aluminum, PCD, copper-tungsten MACHINE DETAILS Input voltage: 380/400 V Total connected load: 12 kVA EQUIPMENT - Linear scales on all axes - Collision protection in U, V, and Z - Wire break detection - Surface-optimized generator for longer tool life - Optimized filter technology for consistent process reliability

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, product length (min.): 60 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Glued edge thickness: max. 20 mm Maximum bonding height: 60 mm Maximum rolled material thickness: 3 mm Piece width: min. 60 mm Maximum feed: max. 25 m/min Feed: continuous Electrical height adjustment: available Dolqvasvwcuyslgjut Pressure: top belt pressure Preheating zone: available Granulate glue system: with prefabricated container Glue container: changeable/variable Sprayer: available Assembly milling unit: available Trimmer group: with 2 motors Milling stations: flush/radial/bevel, 1 available Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip storage: available Aggregates: synchronized aggregates with NC axis(s) Machine version: left side Quick-change units: available MACHINES DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special equipment: with nesting - new chains - HOMAG feed device 2 rollers - HOMAG A 20 gluing unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile scraper device PN 10 - HOMAG FA 11 finishing unit

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 132019, workpiece weight (max.): 500 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 160 mm, Machine overhauled in 2007 TECHNICAL DETAILS X-axis: 320 mm Y-axis: 220 mm Z-axis: 160 mm U-, V-axis: ± 48 mm Tap pitch/height: ±30° / 66 mm Travel speed: 1 – 900 mm/min Working area Tank dimensions (W × D × H): 1,000 × 490 × 260 mm Load capacity: max. workpiece weight: 500 kg Dielectric volume: 240 l Wire EDM system Wire EDM diameter (single wire): 0.33 – 0.05 mm Wire EDM diameter (double wire): 0.33 – 0.05 mm Automatic wire threading: 0.33 – 0.05 mm Automatic rethreading: 0.33 – 0.07 mm Min. threading hole: 0.3 mm (for 0.25 mm wire) Number of spools: 2 front, 1 rear Front spool weight: 1.6 – 8 kg Rear spool weight: 16 – 25 kg Taper: ± 30° Dielectric Filter type: 3 built-in paper cartridges Total filter area: 66 m² Tank volume: 800 l Numerical control Dujlqvaov Tn A Uelget Control type: PC-based CNC Screen: LCD 12.1" TFT touchscreen MACHINE DETAILS Dimensions (W × D × H): 2,320 × 2,310 × 2,320 mm Machine weight (without dielectric): 3,900 kg Connected load: 15 kVA EQUIPMENT - Microcut function for wire diameters of 0.02–0.03 mm - CT robot interface installed at the factory

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 723035, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 4,200 kg, TECHNICAL DETAILS X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Resolution: 0.0005 mm Distance from fixture to table: 230 - 730 mm Working area Work tank type: Automatic front door with up/down movement Tank dimensions (W × D × H): 1,560 × 1,130 × 600 mm Dielectric height: 275 - 470 mm Workpiece weight: 4,200 kg Electrode weight: 350 kg Workpiece dimensions (W × D × H): 1,550 × 1,090 × 430 mm Dielectric system Filter system: 8 paper cartridges Tank volume: 1,835 l Machine current: 128 A Electrode changer: 7 slots Spindle mount: Erowa Software features Pilot Expert 3: Optimization and automatic monitoring of machining parameters Power Control Expert: Machining current, self-adapting to the electrode geometry Micro-Machining: Control of electrode wear for small-size applications SPAC: Short-circuit protection system Numerical control Polishing Ra 0.1 µm (CH0): Standard Duelqev Tnv Ujvalgst Contouring / M-functions / Machine self-diagnosis: Standard DNC1 and DNC3 communication interface: Standard Servo-controlled thermal stabilization: ±1° Program Expert 1.2: Automatic program generation and generator tuning on the control system Auto-restart: Standard

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 667007, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller model: Windows Pentium, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 400 mm Duolqsv Tnm Hjvalget Z-axis: 450 mm Resolution: 0.0001 mm Tank size: 1,220 x 870 x 470 mm Working area Table dimensions: 750 × 600 mm T-slot dimensions (number): 12 mm (5 pieces) Distance between table and fixture: 150 - 600 mm Electrode and workpiece Max. electrode weight: 100 kg Max. workpiece weight: 1,600 kg Max. workpiece dimensions (W × D × H): 1,200 × 850 × 400 mm Dielectric Filter type: 8 integrated paper cartridges Tank capacity: 820 l Dielectric level: 145 - 440 mm (programmable) Container type: Lowerable tank Surface roughness: 0.20 µm Ra MACHINE DETAILS Weight: 4,400 kg Operating voltage: 400 V Installation dimensions: approx. 3,720 x 5,100 x 3,000 mm