Second-hand machinery for sale (2,408)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516330J00044, Year of construction: 2018, operating hours: 1,265 h, load capacity: 4,990 kg, lifting height: 4,000 mm, mast type: duplex, fork length: 1,200 mm, fork width: 1,150 mm, TECHNICAL DETAILS Lifting capacity: 4,990 kg Lifting height: 4,000 mm Clearance height: 2,800 mm Fork length: 1,200 mm Maximum fork width: 1,150 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,000 mm x 1,400 mm x 2,800 mm Unladen weight: 7,726 kg Mast: Duplex Number of wheels: 4 Drive: Electric Iijdpfxsx Hzzis Ah Uok Battery Brand/Type: 80V 6PZM 930 Year of battery: 2021 Capacity: 930 Ah Battery voltage: 80 V Battery test result: 60% Operating hours: 1,265 h EQUIPMENT Side shift Non-marking tyres Work lights CE marking User manual

Condition: used, Year of construction: 2012, Mori Seiki NTX2000/1500SZ 5-Axis Mill/Turn with MAPPS/F31iB5 Control, Max Workpiece Swing Diameter 660mm, Max Swing Over Cross Slide 660mm, Max Turning Diameter 610mm, Max Turning Length 1540mm, Bar Work Capacity 65mm, Travel X/Y/Z/X2/Z2 = 495/250/1560/160/1402mm, Main Spindle Kitagawa 8”dia Chuck at 5,000rpm, Sub-Spindle Kitagawa 8”dia Chuck at 5000rpm, 76 Position ATC, Spindle Taper Capto C6 at 12,000rpm, High-Pressure Coolant, 10 Station Indexing Turret, Swarf Conveyor, Machine Weight 15,000kgs, Floor Space (LxWxH) 4076 x 2890 x 2626mm (2012) Iedpfx Asx Hxk Ujh Ujik Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Production line consisting of: (1) Conical twin-screw extruder Technical details: Screw diameter 43 mm, capacity: max. 150 kg/h, KraussMaffei-Berstorff control system, weight 2.3 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: Equipped with three (3) SPECK pump systems, table length approx. 4 m (1) Haul-off unit Technical details: Speed approx. 0.1 - 11 m/min, pulling force approx. 25,000 N, contact length approx. 1,500 mm, profile clearance approx. WxH 300 x 180 mm, with film application unit (1) Sawing unit Technical details: Upstroke, saw blade diameter 250–400 mm, profile clearance WxH 340 x 20 mm / diameter 115 mm, cycle max. 40 cuts/min (1) Tilting table Ijdpox I I Ncofx Ah Uoik Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 280 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 500 mm, TECHNICAL DETAILS X-axis: 280 mm Y-axis: 120 mm Z-axis: 500 mm C-axis: 360° (0.0001°) Spindle speed: 4,500 rpm Spindle bore: 62 mm Iiedox I Axrjpfx Ah Usk Chuck diameter: 10 inches MACHINE DETAILS Control: OSP U 100 L Weight: 6,000 kg EQUIPMENT Driven tools Chip conveyor Transformer Manuals

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 27159, Year of construction: 2000, operating hours: 6,760 h, load capacity: 10,000 kg, lifting height: 3,770 mm, mast type: duplex, fork length: 1,530 mm, fork width: 1,330 mm, TECHNICAL DETAILS Lifting capacity: 10,000 kg Lifting height: 3,770 mm Clearance height: 2,870 mm Fork length: 1,530 mm Max. fork width: 1,330 mm Min. fork width: 390 mm MACHINE DETAILS Mast: Duplex Number of wheels: 4 wheels Drive: Electric Battery voltage: 72 V Dimensions & Weight Dimensions (L x W x H): 3,150 x 1,500 x 2,870 mm Unladen weight: 13,650 kg Iisdpfx Ahjx Hzvme Ujk Operating hours: 6,760 h EQUIPMENT User manual Side shift Fork adjustment Work lights Camera

Condition: used, Year of construction: 2007, Mazak Variaxis 500-5Xi II Twin Pallet 5 Axis CNC Machining Centre. Serial No. 193582 (2007) with Mazatrol Matrix CNC Control (2024), Pallet Size Capacity 500mm Work Diameter, 405mm Work Height, 300kg Work Mass, 40 Spindle Taper, 12,000rpm Max Spindle Speed, 40 Tool ATC, FSE 1100 Litre Coolant System with Swarf Conveyor, Flow Rate 220 LPM Machine Weight 11500kgs, Manuals Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Iiodpfex E T Npsx Ah Ujk

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control unit, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t Iiodox I I Ilopfx Ah Uok (1) Calibration table Technical details: Four (4) SPECK pump units, length approx. 6 m, weight 2.7 t (1) Haul-off/saw combination Technical details: Weight approx. 1.8 t, with two (2) IDE chip extraction systems ME AS 58 (1) Tilting table Technical details: Length approx. 6 m, weight approx. 300 kg

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, spindle speed (max.): 2,000 rpm, turning diameter: 800 mm, turning length: 750 mm, controller model: Fanuc Oi-Td, Equipment: chip conveyor, TECHNICAL DETAILS Turning diameter: 800 mm Turning length: 750 mm Spindle power: 30 kW Spindle speed: 2000 rpm Turret stations: 12 positions Chuck size: 21" MACHINE DETAILS Control: Fanuc Oi-Td Machine weight: 9,800 kg Iijdpex I Augsfx Ah Uok EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 199851086/1098, table width: 1,600 mm, overall weight: 6,700 kg, travel distance X-axis: 1,200 mm, travel distance Y-axis: 680 mm, travel distance Z-axis: 400 mm, TECHNICAL DETAILS X-axis travel: 1,200 mm Y-axis travel: 680 mm Z-axis travel: 400 mm Table width: 1,600 mm Table depth: 670 mm Magnet width: 1,200 mm Magnet depth: 600 mm MACHINE DETAILS Dimensions & Weight Iodpfxsx Hzuvo Ah Ueik Dimensions (L x W x H): 5,900 x 3,000 x 2,500 mm Net weight: 6,700 kg Control: Conventional Power: 11.0 kW EQUIPMENT Documentation CE marking

Condition: used, Year of construction: 2019, Dahlih MCH630 Horizontal Twin Pallet Machining Centre with Fanuc Series Oi-MF, Pallet Size 630 x 630mm, Travel (X/Y/Z) = 1000/850/800mm, B Axis = 1 deg Positioning, 6000rpm Spindle, Spindle Taper BT50, 60 Position ATC, max Table Load 1200kgs, Floor Space 4500 x 6230 x 3380mm, Machine Weight 18,000kgs. S/No. 3003020094 (2019) Isdpjx E Umpofx Ah Usik Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Production line consisting of: (1) Twin-screw extruder Iisdpfxsx I Itbs Ah Usk Technical details: Screw diameter 65 mm, weight 2.8 t /// Drive: Thyssen Henschel TPM 3-65-DOS-25, serial number 6333547/13, weight 710 kg (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit Technical details: Contact length approx. 1,500 mm (1) Film application unit (1) Saw unit Technical details: Upward stroke, saw blade diameter 250–400 mm, profile gap WxH 340 x 20 mm / diameter 115 mm, sequence max. 40 cuts/min (1) Tilting table Technical details: Length approx. 6,000 mm

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 430290898, table width: 2,000 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 1,500 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 550 mm, TECHNICAL DETAILS X-axis travel: 1,500 mm Y-axis travel: 900 mm Z-axis travel: 550 mm Iijdpfx Ajx Hztloh Uok Table width: 2,000 mm Table depth: 900 mm Magnet width: 1,500 mm Magnet depth: 800 mm Power: 60.0 kW Max. spindle speed: 3,000 rpm MACHINE DETAILS Weight: 21,000 kg Control manufacturer: Unicon EQUIPMENT CE marking Documentation

Condition: used, Year of construction: 2023, Dahlih DMX500 (4+1) Machining Centre with Fanuc Oi-MF Plus Control, Table Size 500mm (dia), Travel X/Y/Z=600/900/560mm, Max Spindle Speed 15000rpm, 40 Position ATC, 20 bar Through Spindle Coolant. S/No. 301302003 (2023) Iedex E Ulrjpfx Ah Ueik Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control system, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: four (4) SPECK pump units, length approx. 6 m, weight 2.7 t (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Iiodpfx Ahox I Inxo Usk Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 018.0402, workpiece weight (max.): 100 kg, gear diameter: 300 mm, controller model: Optronic CNC D140, center height: 250 mm, table length: 2,300 mm, TECHNICAL DETAILS Centre height: 250 mm Table length: 2,300 mm Grinding spindle travel: 200 mm Gear diameter: 300 mm Module range: 0.5 mm - 8 mm Helix angle: 35° Maximum workpiece weight: 100 kg MACHINE DETAILS Control type: Optronic CNC D140 Dimensions & Weight Dimensions (L x W x H): 5,900 x 1,300 x 2,000 mm Net weight: 7,500 kg Number of transport packages: 5 Iijdpfx Ajx Hzrzjh Ujk

Condition: used, Year of construction: 2017, Dahlih DCM 4225 Double Column Machining Centre with Fanuc Series Oi-MF, Table Size 4000 x 2200mm, Travel X/Y/Z= 4200/2000/800mm, Max Table Load 12,000kgs, 40 Tool ATC, Spindle Taper BT50, Max Spindle Speed 6000rpm, Main Motor 26kW (35HP), 20 Bar Through Spindle Coolant, 4th Axis Interface, 300mm Column Extension, Right-Angled Head, Renishaw RMP 60 Probe, Swarf Conveyor, Floor Space 5650 x 11120 x 4130mm, Machine Weight 40,000kgs. S/No. 3006030013 (2017) Iedpfx Ahox E Ukhj Usik Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control unit, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit + punching unit + guillotine unit Iiedpfsx I Ig Ujx Ah Ujk Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Length approx. 6,000 mm (1) Twin-screw extruder Technical details: Screw diameter 90 mm, max. capacity 300 kg/h, BMCsmart control panel, weight approx. 3 t /// Drive motor HENSCHEL T1MAX90 C-35L, serial number 43-220/5, weight approx. 1.5 t (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: ready for operation (used), Year of construction: 2005, operating hours: 11,148 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, table length: 2,500 mm, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 2,000 mm Y-axis travel: 620 mm Z-axis travel: 520 mm Number of axes: 3 Table length: 2,500 mm Table width: 600 mm Tool holder: SK40 Main spindle power: 20 kW Max. spindle speed: 12,000 rpm Tool magazine: 30 MACHINE DETAILS Dimensions (L x W x H): 5,000 x 2,500 x 3,000 mm Net weight: 10,500 kg Iijdox Hzn Ajpfx Ah Uek Power: 20 kW Operating hours: 11,148 h EQUIPMENT - Tool magazine - Chip conveyor - External cooling - without machine vices.

Condition: used, Year of construction: 2018, Mori Seiki NTX2000/1500SZM Mill/Turn with F31iB5/Celos ERGOline Touch Control, Main Spindle Kitagawa 10”dia Chuck at 4000rpm, Sub-Spindle Kitagawa 8”dia Chuck at 5000rpm, 10 Station Turret, Milling Head Capto C6, 76 Position ATC, Hydrajet WP10-1000 High Pressure Coolant, Swarf Conveyor, Machine Weight 15,320kgs. S/No. NTX21180210 (2018) Please Note: We have been made aware of a Tailstock Ballscrew repair needed. Please find attached 2024 quotation on the website for supply and fitting and take this into consideration when bidding on this item. Ijdpfx Asx E Ugvjh Ujik Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2012, Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t Isdpfxox I Emfs Ah Uoik

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1000040377, total length: 2,000 mm, total width: 2,500 mm, total height: 2,100 mm, Equipment: CE marking, documentation/manual, MACHINE DETAILS Main motor power: 10 kW Voltage: 400 V Current consumption: 18 A Fuse: 32 A Output: 10.0 kW Iiedpfx Aex Hhc Heh Ujk Dimensions (L x W x H): 2,000 x 2,500 x 2,100 mm Shipping units: 2 pieces EQUIPMENT Saw unit Documentation Electrical schematics User manual CE marking

Condition: used, Year of construction: 2020, Mori Seiki NTX2000/1500 2nd Gen Mill/Turn with Celos/F31iB5 Control, Max Swing of Workpiece 700mm, Max Swing over Cross-Slide 700mm, Max Distance Between Centres 1842mm, Max Turn Length 1538mm, Main Spindle Kitagawa 210mm dia Chuck at 5,000rpm, Sub-Spindle Kitagawa 210mm dia Chuck at 5,000rpm, Milling Spindle Capto C6 at 12,000rpm, 76 Position ATC, 12 Station Turret, Hydrajet MS30-1000-70 Bar High Pressure Coolant, Machine Dimensions (LxWxH) 6205 x 2830 x 2750mm, Machine Weight 18,950kgs. S/No. NTX23200821 (2020) Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Iisdpfjx E Ubmox Ah Ujk

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, MACHINE DETAILS Voltage: 400 V Current consumption: 50 A Dimensions (L x W x H): 3,600 x 1,480 x 1,200 mm Transport packages: 4 units EQUIPMENT Electrical schematics Iisdpex Hhb Nsfx Ah Uok User manual Operating system Tools for unit 1 Tools for unit 3 Tools for unit 4 Tools for unit 5 Tools for unit 6 Tools for unit 7

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 409081, saw blade diameter: 300 mm, cutting length (max.): 8,000 mm, cutting height (max.): 3,000 mm, Equipment: CE marking, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting height (vertical): 3,000 mm Max. cutting width: 8,000 mm Max. saw blade diameter: 300 mm MACHINE DETAILS Voltage: 400 V Power consumption: 8 A Fuse: 16 A Power output: 3.0 kW EQUIPMENT Iodpex Hg Uhjfx Ah Usik CE marking Horizontal cutting Vertical cutting

Condition: ready for operation (used), Year of construction: 2017, operating hours: 1,717 h, functionality: fully functional, machine/vehicle number: 904B0018, table width: 3,500 mm, table length: 14,400 mm, saw blade diameter: 1,000 mm, Equipment: CE marking, documentation/manual, TECHNICAL DETAILS Maximum saw blade diameter: 1,000 mm C1: 540° B1: 250° C2: 540° B2: 90° Table length: 14,400 mm Iodpox Hg Stefx Ah Uoik Table width: 3,500 mm X-axis maximum travel: 5,000 mm Y-axis maximum travel: 15,870 mm Z-axis maximum travel: 1,000 mm MACHINE DETAILS Number of milling spindles: 1 Number of controlled axes: 2 5-axis unit power: 12 kW Operating hours: 1,717 h Main motor power: 55 kW Voltage: 400 V Current consumption: 130 A Power: 65 kW Transport dimensions (L x W x H): 40,000 mm x 2,400 mm x 2,700 mm EQUIPMENT Saw blade unit with flange connection Milling unit with tool changer Documentation CE marking