Short-stroke heavy-duty cylinder 100 t

Bahco CR 100-200 800 bar

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm Ppedol Tuvdopfx Abgou -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. Podpfx Abeq E Ti Hjgspu If you want to try it, please bring cable.

Year of construction: 2019, condition: as good as new (ex-display), Aluminum flat conveyor including 4 suspension points Dim: 3000 + 520 x 105mm Conveyor belt width 400mm PVC conveyor belt incl. Studs and wave edge Ppjdpod Ra Ttefx Abgeu * optional with magnetic deflection roller at the end of the conveyor belt. * optionally with substructure * Special designs in all versions possible.

Condition: excellent (used), functionality: fully functional, mileage: 16,350 km, fuel type: diesel, overall weight: 48,000 kg, tire condition: 75 %, axle configuration: 8x4, fuel: diesel, color: blue, total length: 16,200 mm, total width: 2,540 mm, total height: 3,990 mm, Year of construction: 2019, operating hours: 1,215 h, Equipment: ABS, car registration, truck registration, === KEY SPECIFICATIONS === Year of manufacture: 2019 Operating hours: 1,215.6 h Mileage: 16,350.9 km Crane manufacturer: Palfinger Crane model: P 900 Chassis manufacturer: Volvo Axle configuration: 8x4 Drive: Diesel Transmission: Automatic Emission class: Euro 6 Gross vehicle weight: 48,000 kg Tyres: Continental Tyre condition: approx. 75% CE certification: Yes === CRANE SPECIFICATIONS === Crane type: Telescopic truck-mounted crane Maximum working height: approx. 90 m Maximum outreach: approx. 32.5 m Maximum lifting capacity: According to Palfinger load charts Stabilizers: Hydraulic outriggers Remote control: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certified with full documentation included Ready for immediate transport and operation Extensive technical documentation available === CONDITION === Machine in good working condition Fully inspected and tested Inspection possible upon request === LOCATION & PRICE === Located in Sittard, Netherlands Worldwide delivery available Price on request, EXW, excl. VAT === DESCRIPTION === Heavy-duty Palfinger P 900 truck-mounted crane mounted on a Volvo 8x4 chassis Ideal for professional lifting operations requiring high working height and long outreach Part of a professionally maintained fleet Fully CE certified and immediately ready for use Spare parts and professional technical support available on request === DELIVERY === Crane loading available on request for smooth dispatch Flexible shipping options tailored to destination and logistics requirements Podpsygvitefx Abgspu All transport operations professionally handled by the logistics team of Collé Rental & Sales

Condition: used, axle configuration: > 3 axles, first registration: 10/2006, total width: 2,850 mm, suspension: other, tire size: 285/70R19.5, color: black, Year of construction: 2006, Equipment: ABS, = Additional options and accessories = - Central lubrication system = Remarks = Faymonville Jeep Dolly D3 Year 10/2006. 1 x lift axle. 1 x friction-steered axle (trailing steering axle). Air suspension. Max. technical weight: 56,000 kg. Faymonville STBZ-5VA Year 10/2006. Pendle axle. Detachable gooseneck. Movable deck. Extendable bed: 400 cm. Load bed: 650 + 400 cm. 50,000 kg neck load capacity. Max. technical weight: 119,680 kg. = Further information = Axle configuration Tire size: 285/70R19.5 Brakes: drum brakes Front axle 1: twin tires; left inner tread: 15%; left outer tread: 60%; right inner tread: 60%; right outer tread: 60%; suspension: air suspension Front axle 2: twin tires; left inner tread: 30%; left outer tread: 30%; right inner tread: 40%; right outer tread: 60%; suspension: air suspension Front axle 3: twin tires; steered; left inner tread: 30%; left outer tread: 70%; right inner tread: 60%; right outer tread: 70%; suspension: air suspension Rear axle 1: twin tires; steered; left inner tread: 30%; left outer tread: 60%; right inner tread: 40%; right outer tread: 70%; suspension: hydraulic suspension Rear axle 2: twin tires; steered; left inner tread: 50%; left outer tread: 50%; right inner tread: 30%; right outer tread: 75%; suspension: hydraulic suspension Rear axle 3: twin tires; steered; left inner tread: 60%; left outer tread: 60%; right inner tread: 60%; right outer tread: 60%; suspension: hydraulic suspension Rear axle 4: twin tires; steered; left inner tread: 60%; left outer tread: 60%; right inner tread: 40%; right outer tread: 50%; suspension: hydraulic suspension Rear axle 5: twin tires; steered; left inner tread: 70%; left outer tread: 70%; right inner tread: 20%; right outer tread: 70%; suspension: hydraulic suspension Weights Unladen weight: 36,600 kg Payload: 83,080 kg Gross vehicle weight: 119,680 kg Financial Information Price: On request Identification Type number: STBZ-5VA + 3 AXLE JEEP DOLLY / E = Company information = Pedpfx Abjxbng Eogspu ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) We speak Russian. We make every effort to provide correct information, but no rights can be derived from the listed texts.

Condition: used, Year of construction: 1990, sheet width 3050 mm plate thickness 12 mm distance between columns 3100 mm table height over floor 900 mm cutting angle adjustment 0,5 - 3 ° no. of strokes 6 - 13 Hub/min back stop - adjustable 1000 mm down holder 18 St oil volume 350 l total power requirement 22,5 kW weight of the machine ca. 8 t dimensions of machine L x W x H 3,96 x 2,10 x 2,22 m - with adjustment of cutting gap - Ppedpfx Asu Uu Smsbgju Accessories: electr. back gauge, spare knives

Condition: used, Screw compressor, KAESER, type BS 50 Manufacturer's serial number: 402852, year of manufacture: 1990 Volumetric flow rate: 5 m³/min. Pjdpfx Absiyu Ifsgspu Pressure: 7.5 bar Main motor power: 30 kW Mains connection: 400 volts, 50 Hz Connection thread: 1 1/2" - Operating hours recorded: 1107.90 - Load hours recorded: 749.00 - Soundproofed Space requirements (L x W x H): 1600 x 1070 x 1350 mm Weight: 900 kg Very good condition Previously used as a reserve compressor and has only a few operating hours.

Year of construction: 1994, condition: good (used), Manufacturer: Boge Pedohtq Dvjpfx Abgopu Type: V LEX 45 Engine: 45 kW Capacity: 6.5 m³/min

Condition: used, functionality: fully functional, Year of construction: 1995, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 14 mm, Equipment: safety light barrier, Hydraulic Shear Brand: Casanova Model: VC-26 Year: 1995 Ppedpfx Abowy Nhqegju Power: 30KW New WEINTEK control installed in 2020. Cutting length: 3100mm Maximum cutting thickness (steel): 20mm Maximum cutting thickness (stainless): 14mm Throat: 500mm Cuts per minute: 8-18 Backgauge: 1,000mm Manual blade gap adjustment via side levers. Front safety laser.

Condition: new, empty load weight: 15,420 kg, maximum load weight: 61,080 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 900 mm, tire size: 235/75/r17,5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings Hardwood decking 30 mm thick Loading platform: Loading area in extendable design with rear bevel of approx. 500 mm x 8° 8 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 50,000 kg. Seat posts: - JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Axles and tires: BPW axles and suspension, 4th + 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lock via reverse gear and manual activation Tires 235/75 R 17.5 3PMSF Brake system: Pedpol Sl Izsfx Abgopu Brake system in accordance with EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15 pole ISO-12098 Paint finish: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the bulkhead 2" kingpin One galvanized steel bulkhead approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 2 restraining shoes with holder on the bulkhead Mounting in the rear area of the gooseneck for ALU docking lights A bracket for a rotating beacon at the rear of the trailer Galvanized supports under the bevel of the loading area White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear Electro-hydraulic unit at the rear under the cargo bed A holder for the warning signs, including a socket, on the gooseneck and on the rear panel on the left and right respectively Control valves for the ramps mounted on the right-hand side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm (LxH) The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or a 40' container 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Galvanized extensions, extendable by approx. 230 mm per side Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope On the chequer plates, above the kingpin and the load floor