Crane magnet, mechanically switchable lifting magnet, mechanical load magnet

BAKKER MAGNETICS BM 400 BM 50101

Year of construction: 1988, condition: used, weight max. in kg 6000 kg fork length 1900 mm 89% Kfjdpferxxbtox Ah Usa serial number GEF 2240 height of stroke 3300 mm weight of the machine ca. 9650 t

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Working stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Ksdpfx Ahowq Dpqj Uefa Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R The machine starts up, but the control unit does not respond to commands. The previous owner replaced the original AMADA control with a DELEM unit.

Year of construction: 2012, condition: used, fuel type: electric, weight max. in kg 2500 kg stroke 3700 mm fork length 900 mm Super elastic battery Baujahr 2013 construction height 2630 mm weight of the machine ca. t Kodpfofibh Rsx Ah Uefa Duplex / Free lift

Condition: excellent (used), Offered is a used steel hall: steel, hot-dip galvanized, monopitch roof, trapezoidal sheet and doors. Dimensions: 25.55 m (length) x 5.56 m (width). Height at front: 3.43 m, height at rear: 3.13 m. Roof overhang at rear: 1.30 m. Door dimensions: 3.04 m x 2.49 m. Very good condition. The hall is assembled. Sale without dismantling. Kedpfoxcwtqox Ah Usfa

Condition: new, functionality: fully functional, Year of construction: 2025, Box Type Electrostatic Powder Coating Oven: Length: 500cm, Width: 250cm, Height: 300cm Kedpfxjv Nvndo Ah Uofa - Powder Coating Booth with Filter: Length:300cm, Width:220cm, Height:270cm - Electrostatic Powder Coating Equipment: Model: HMK MULTICOLOR, Type of Use: Manual

Condition: like new (used), Year of construction: 2004, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 8025 downstoke CNC Press brake Year 2004 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Kfsdpfxju A Dgro Ah Uea Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 6100 kg Bed Length 2500 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: ready for operation (used), Year of construction: 2002, sheet width 3220 mm Kfedoxr Rbaspfx Ah Uja plate thickness 2.0 mm ST thickness at "Niro-steel" 1.0 mm upper clamping bar adjustment 160 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm bending speed 120 Grad/sec back stop - adjustable 10.0 - 1.000 mm adjustment speed 300 mm/sec compressed air 6.0 bar work height max. 869 mm control POS 2000 total power requirement 10.4 kW voltage 400 V weight 5950 kg range L-W-H 4565 x 2950 x 2163 mm current list price ~ 150.000 Euro with excellent features (!!) - in checked conditions - machinevideo - ?v=VNHsE2tbScA Features: - CNC electromotive universal swing bending machine * High-precision mechanics with modern control technology * For individual and series production * Robust high-speed machine with high axis speeds * Torsion-resistant welded construction - Rotating upper beam / as an automatic tool changing system * With 2 tool stations (sharp and goosefoot bending rails) * Reduces setup and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model "POS 2000" * Control panel front right (operable with PC mouse) * Color display * USB interface * Automatic cutting calculation * Material and tool library * Dimensionally accurate bending simulation * Windows XP operating system * Swiveling control panel, front right - Servo-inverter-controlled drives * For bending/upper jaw & electric backgauge - CNC electro-motorized lower jaw adjustment - CNC electro-motorized backgauge * Travel speed 300 mm/sec. * With rear sheet metal support surface - 1x freely movable double foot switch - Operating instructions Optional accessories included: - 1x 30° upper tool sharpening rail - 1x split set of upper tool gouge rail - 2x bending rails

Year of construction: 1995, condition: ready for operation (used), A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible. Kfodpfswm Nn Rjx Ah Uoa

Condition: good (used), Year of construction: 1995, Double girder traveling crane, bridge crane, overhead crane, assembly crane, workstation crane, ceiling-mounted traveling crane, traveling crane, crane system -with 2x electric cable winches -Load capacity: 2 x 1600 kg -Bridge load capacity: 3.2 tons -Wingspan: 6.4 m -Hallway service -Dimensions: 2000/6400/H1000 mm Ksdpfx Aeb A Ny Eoh Ujfa -Weight: approx. 2000 kg

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Kfedpjw Iq Ugofx Ah Uea Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition