Submerged arc welding machine

Oerlikon Minisaf 02

Condition: new, Band saw machine Make: METALLKRAFT Fsdpfx Aeilg Hdsdcsgc Model: BMBS 300 x 320 HA-DG Art.no.: 3690041 Condition: New machine cutting range (round): 300 mm belt speed: 20-100 m/min, infinitely variable standard equipped with: - Fully hydraulic, semi-automatic version. after starting, the machine clamps automatically after the end of the cut, it returns to the starting position stops the saw band and opens the vice. - Cutting probe for automatic detection of material height - Horizontal vice, mechanical, hydraulic - Monitoring of saw band tension, electromechanical - Chip clearing brush - Measuring stop with scale 1.000 mm - coolant device - Operating instructions

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, Fjdpfx Ajhpktvodcegc - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm Fjdpoirax Ujfx Adcjgc -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: new, Year of construction: 2026, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range Fgsdpfx Aeg U Uv Rjdcoc 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Year of construction: 1979, condition: used, throat: 22/29 mm drive motor: bei 380 V ca. 0,55 kW space needed: 450 x 500 x 560 mm weight: ca. 6,5 kg Fodpfjzif Sox Adcegc pressure power: 30 kN

Condition: used, Year of construction: 2004, Sato cutting machine for sale Fsdpevx N I Njfx Adcjgc

Condition: new, Model Name Fodpfogvquwex Adcegc Shark 332-1 CCS

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Mot. tank-boiler turning device with rail trolley Technical data: - Total payload driven + travelling unit 40000 kg. - payload per vessel device 20000 kg - workpiece diameter approx. 500 - 3500 mm - Centre distance of the support rollers adjustable via trapezoidal thread spindle - roller diameter 500 mm - roller width 150 mm - driven unit with drive on both sides - infinitely variable rotational speed Fgsdpfx Adshcnhmocec - manual remote control for Re- and Li.-run - drive 400 V - Both units are mounted on rail trolleys - space requirement with running unit approx. W 3800 x H 1150 x D 1350 mm - Space requirement with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight attached unit approx. 2500 kg - Weight with running unit approx. 1800 kg

Condition: new, Year of construction: 2025, TTMC WELDING MANIPULATOR TYPE WP500 - Capacity horizontal 500 kg - Capacity vertical 250 kg - Table dimension 560 mm Fodpfx Ajgg Rb Todcjgc - Door stop 170 mm - Electric tiltable - Foot pedal - Documentation - 230V CALL FOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE

Condition: like new (used), Year of construction: 2022, 600 Kg load capacity welding rotary table adjustable in height with through hole 100 - 200mm plate diameter 700mm height horizontal min. 0,65m, max. 1,25m height tilted min. 0,45m, max. 0,95m speed from 0,01 - 1,1 rpm Tilt up to 135 Fsded Anz Ropfx Adcjgc hand and foot remote control with speed indicator very robust